| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: openvpn | Distribution: SUSE Linux Framework One |
| Version: 2.6.8 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.7 | Build date: Wed Aug 21 17:48:45 2024 |
| Group: Productivity/Networking/Security | Build host: s390zl31 |
| Size: 1453768 | Source RPM: openvpn-2.6.8-slfo.1.1.7.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://openvpn.net/ | |
| Summary: Full-featured SSL VPN solution using a TUN/TAP Interface | |
OpenVPN is an SSL VPN solution which can accommodate a wide range of configurations, including remote access, site-to-site VPNs, WiFi security, and remote access solutions with load balancing, failover, and fine-grained access-controls. OpenVPN implements OSI layer 2 or 3 secure network extension using the SSL/TLS protocol, supports flexible client authentication methods based on certificates, smart cards, and/or 2-factor authentication, and allows user or group-specific access control policies using firewall rules applied to the VPN virtual interface. OpenVPN is not a web application proxy and does not operate through a web browser.
GPL-2.0-only WITH openvpn-openssl-exception
* Mon Nov 20 2023 mohd.saquib@suse.com
- update to 2.6.8:
* SIGSEGV crash: Do not check key_state buffers that are in S_UNDEF
state - the new sanity check function introduced in 2.6.7 sometimes
tried to use a NULL pointer after an unsuccessful TLS handshake
* CVE-2023-46850 OpenVPN versions between 2.6.0 and 2.6.6 incorrectly
use a send buffer after it has been free()d in some circumstances,
causing some free()d memory to be sent to the peer. All configurations
using TLS (e.g. not using --secret) are affected by this issue.
* CVE-2023-46849 OpenVPN versions between 2.6.0 and 2.6.6 incorrectly
restore --fragment configuration in some circumstances, leading to a
division by zero when --fragment is used. On platforms where division
by zero is fatal, this will cause an OpenVPN crash.
* DCO: warn if DATA_V1 packets are sent by the other side - this a hard
incompatibility between a 2.6.x client connecting to a 2.4.0-2.4.4
server, and the only fix is to use --disable-dco.
* Remove OpenSSL Engine method for loading a key. This had to be removed
because the original author did not agree to relicensing the code with
the new linking exception added. This was a somewhat obsolete feature
anyway as it only worked with OpenSSL 1.x, which is end-of-support.
* add warning if p2p NCP client connects to a p2mp server - this is a
combination that used to work without cipher negotiation (pre 2.6 on
both ends), but would fail in non-obvious ways with 2.6 to 2.6.
* add warning to --show-groups that not all supported groups are listed
(this is due the internal enumeration in OpenSSL being a bit weird,
omitting X448 and X25519 curves).
* --dns: remove support for exclude-domains argument (this was a new 2.6
option, with no backend support implemented yet on any platform, and it
turns out that no platform supported it at all - so remove option again)
* warn user if INFO control message too long, do not forward to management
client (safeguard against protocol-violating server implementations)
* DCO-WIN: get and log driver version (for easier debugging).
* print "peer temporary key details" in TLS handshake
* log OpenSSL errors on failure to set certificate, for example if the
algorithms used are in acceptable to OpenSSL (misleading message would be
printed in cryptoapi / pkcs11 scenarios)
* add CMake build system for MinGW and MSVC builds
* remove old MSVC build system
* improve cmocka unit test building for Windows
* Wed Aug 16 2023 mohd.saquib@suse.com
- update to 2.6.6:
* configure.ac: fix typ0 in LIBCAPNG_CFALGS
* Avoid unused function warning/error on FreeBSD (and potientially others)
* fix warning with gcc 12.2.0 (compiler bug?)
* Fix CR_RESPONSE mangaement message using wrong key_id
* Print a more user-friendly error when tls-crypt-v2 client auth fails
* Ignore Ipv6 route delete request on Android and set ipv4 verbosity to 7
* Revert commit 423ced962d
* Implement using --peer-fingerprint without CA certificates
* show extra info for OpenSSL errors
* dist: add more missing files only used in the MSVC build
* dist: Include all documentation in distribution
* unit_tests: Add missing cert_data.h to source list for unit tests
* test_tls_crypt: Improve mock() usage to be more portable
* Remove old Travis CI related files
* options: Do not hide variables from parent scope
* pkcs11_openssl: Disable unused code
* route: Fix overriding return value of add_route3
* Wed Jun 14 2023 mohd.saquib@suse.com
- update to 2.6.5:
* apctl (windows): generate driver-specific names (if using tapctl
to create additional tap/wintun/dco devices, and not using
- -name) (Github #337)
* interactive service (windows): do not force target desktop for
openvpn.exe - this has no impact for normal use, but enables
running of OpenVPN in a scripted way when no user is logged on
(for example, via task scheduler) (Github OpenVPN/openvpn-gui#626)
* fix use-after-free with EVP_CIPHER_free
* fix building with MSVC from release tarball (missing version.m4.in)
* dco-win: repair use of --dev-node to select specific DCO drivers
(Github #336)
* fix missing malloc() return check in dco_freebsd.c
* windows: correctly handle unicode names for "exit event"
* fix memleak in client-connect example plugin
* fix fortify build problem in keying-material-exporter-demo plugin
* fix memleak in dco_linux.c/dco_get_peer_stats_multi() - this will
leak a small amount of memory every 15s on DCO enabled servers,
leading to noticeable memory waste for long-running processes.
* dco_linux.c: properly close dco version file (fd leak)
* Fri May 12 2023 info@paolostivanin.com
- Update to 2.6.4:
* DCO: support kernel-triggered key rotation (avoid IV reuse after
2^32 packets). This is the userland side, accepting a message
from kernel, and initiating a TLS renegotiation. As of release,
* fix pkcs#11 usage with OpenSSL 3.x and PSS signing (Github #323)
* fix compile error on TARGET_ANDROID
* fix typo in help text
* manpage updates (--topology)
* encoding of non-ASCII windows error messages in log + management fixed
- Update openvpn.keyring
* Tue Apr 25 2023 mohd.saquib@suse.com
- update to 2.6.3:
* For full changelog please refer to:
https://github.com/OpenVPN/openvpn/blob/v2.6.3/Changes.rst
* implement byte counter statistics for DCO Linux (p2mp server
and client)
* implement byte counter statistics for DCO Windows (client only)
* '--dns server <n> address ...' now permits up to 8 v4 or v6
addresses
* fix a few cases of possibly undefined behaviour detected by ASAN
* add more unit tests for Windows cryptoapi interface
* Dynamic TLS Crypt When both peers are OpenVPN 2.6.1+, OpenVPN
will dynamically create a tls-crypt key that is used for
renegotiation. This ensure that only the previously authenticated
peer can do trigger renegotiation and complete renegotiations.
* Keying Material Exporters (RFC 5705) based key generation
* As part of the cipher negotiation OpenVPN will automatically prefer
the RFC5705 based key material generation to the current custom
OpenVPN PRF. This feature requires OpenSSL or mbed TLS 2.18+.
* OpenVPN will now work with OpenSSL in FIPS mode. Note, no effort
has been made to check or implement all the requirements/
recommendation of FIPS 140-2. This just allows OpenVPN to be run on
a system that be configured OpenSSL in FIPS mode.
* mlock will now check if enough memlock-able memory has been reserved,
and if less than 100MB RAM are available, use setrlimit() to upgrade
the limit. See Trac #1390. Not available on OpenSolaris.
* The --peer-fingerprint option has been introduced to give users an
easy to use alternative to the tls-verify for matching the fingerprint
of the peer. The option takes use a number of allowed SHA256
certificate fingerprints.
* When --peer-fingerprint is used, the --ca and --capath option become
optional. This allows for small OpenVPN setups without setting up a
PKI with Easy-RSA or similar software.
* The --auth-user-pass-verify script supports now deferred authentication.
* Both auth plugin and script can now signal pending authentication to
the client when using deferred authentication. The new client-crresponse
script option and OPENVPN_PLUGIN_CLIENT_CRRESPONSE plugin function can
be used to parse a client response to a CR_TEXT two factor challenge.
* The modernisation of defaults can impact the compatibility of OpenVPN
2.6.0 with older peers. The options --compat-mode allows UIs to provide
users with an easy way to still connect to older servers.
* OpenSSL 3.0 has been added. Most of OpenSSL 3.0 changes are not user
visible but improve general compatibility with OpenSSL 3.0.
- -tls-cert-profile insecure has been added to allow selecting the lowest
OpenSSL security level (not recommended, use only if you must). OpenSSL
3.0 no longer supports the Blowfish (and other deprecated) algorithm by
default and the new option --providers allows loading the legacy provider
to renable these algorithms.
* Ciphers in --data-ciphers can now be prefixed with a ? to mark those as
optional and only use them if the SSL library supports them.
* The --mssfix and --fragment options now allow an optional mtu parameter to
specify that different overhead for IPv4/IPv6 should taken into account
and the resulting size is specified as the total size of the VPN packets
including IP and UDP headers.
* Instead of allocating a connection for each client on the initial packet
OpenVPN server will now use an HMAC based cookie as its session id. This way
the server can verify it on completing the handshake without keeping state.
This eliminates the amplification and resource exhaustion attacks.
For tls-crypt-v2 clients, this requires OpenVPN 2.6 clients or later because
the client needs to resend its client key on completing the hand shake.
The tls-crypt-v2 option allows controlling if older clients are accepted.
- Removed openvpn-fips140-2.3.2.patch
* Thu Mar 02 2023 mohd.saquib@suse.com
- update to 2.5.9:
* Optional ciphers in --data-ciphers Ciphers in --data-ciphers
can now be prefixed with a ? to mark those as optional and only
use them if the SSL library supports them.
* when compiling from a git checkout, put proper branch names into
windows builds
* do not include auth-token in pulled-option digest (interferes
with persist-tun when auth-token is in use, GH #200).
* fix corner case that might lead to leaked file descriptor
* fix parser bug (parse_line()) that can lead to buffer overflows
on malformed command line or server ccd file handling.
Not exploitable.
* pull-filter: ignore leading spaces in option names (work around
server side bug with erroneous extra spaces)
* push: do not add leading spaces to "out of renegotiations" pushed
auth-token fix NULL pointer crash on "openvpn --show-tls" with
mbedtls
* Mon Feb 13 2023 kukuk@suse.com
- Remove migration from openvpn.service to openvpn@.service and
depending requires, this is from pre SLE12 times and not supported
anymore.
* Mon Jan 09 2023 max@suse.com
- bsc#1123557: --suppress-timestamps isn't needed by default.
* Fri Nov 18 2022 dmueller@suse.com
- update to 2.5.8:
* allow running a default configuration with TLS libraries without BF-CBC
(even if TLS cipher negotiation would not actually use BF-CBC, the
long-term compatibility "default cipher BF-CBC" would trigger an error
on such TLS libraries)
* ``--auth-nocache'' was not always correctly clearing username+password
after a renegotiation
* ensure that auth-token received from server is cleared if requested
by the management interface ("forget password" or automatically
via ``--management-forget-disconnect'')
* in a setup without username+password, but with auth-token and
auth-token-username pushed by the server, OpenVPN would start asking
for username+password on token expiry. Fix.
* using ``--auth-token`` together with ``--management-client-auth``
(on the server) would lead to TLS keys getting out of sync and client
being disconnected. Fix.
* management interface would sometimes get stuck if client and server
try to write something simultaneously. Fix by allowing a limited
level of recursion in virtual_output_callback()
* fix management interface not returning ERROR:/SUCCESS: response
on "signal SIGxxx" commands when in HOLD state
* tls-crypt-v2: abort connection if client-key is too short
* make man page agree with actual code on replay-window backtrag log message
* remove useless empty line from CR_RESPONSE message
* Mon Sep 12 2022 dmueller@suse.com
- build with enable-iproute2 again to have root-less mode working (bsc#1202792)
* Sun Jun 05 2022 dmueller@suse.com
- update to 2.5.7:
* Limited OpenSSL 3.0 support
* print OpenSSL error stack if decoding PKCS12 file fails
* fix omission of cipher-negotiation.rst in tarballs
* fix errno handling on Windows (Windows has different classes of
error codes, GetLastError() and C runtime errno, these should now
be handled correctly)
* fix PATH_MAX build failure in auth-pam.c
* fix t_net.sh self-test leaving around stale "ovpn-dummy0" interface
* fix overlong path names, leading to missing pkcs11-helper patch
in tarball
* Wed Mar 23 2022 max@suse.com
- update to 2.5.6:
* bsc#1197341, CVE-2022-0547: possible authentication bypass in
external authentication plug-in
* Fix "--mtu-disc maybe|yes" on Linux
* Fix $common_name variable passed to scripts when
username-as-common-name is in effect.
* Fix potential memory leaks in add_route() and add_route_ipv6().
* Apply connect-retry backoff only to one side of the connection
in p2p mode.
* repair "--inactive" handling with a 'bytes' parameter larger
than 2 Gbytes.
* new plugin (sample-plugin/defer/multi-auth.c) to help testing
with multiple parallel plugins that succeed/fail in
direct/deferred mode.
* Thu Feb 10 2022 max@suse.com
- Fix license tag in spec file.
* Wed Dec 15 2021 dmueller@suse.com
- update to 2.5.5:
* SWEET32/64bit cipher deprecation change was postponed to 2.7
* improve "make check" to notice if "openvpn --show-cipher" crashes
* improve argv unit tests
* ensure unit tests work with mbedTLS builds without BF-CBC ciphers
* include "--push-remove" in the output of "openvpn --help"
* fix error in iptables syntax in example firewall.sh script
* fix "resolvconf -p" invocation in example "up" script
* fix "common_name" environment for script calls when
"--username-as-common-name" is in effect (Trac #1434)
* move "push-peer-info" documentation from "server options" to "client"
* correct "foreign_option_{n}" typo in manpage
* README.down-root: fix plugin module name
* Wed Dec 08 2021 max@suse.com
- Drop 0001-preform-deferred-authentication-in-the-background.patch
Upstream has meanwhile solved this differently and the two
implementations interfere (boo#1193017).
- Obsoleted SLE patches up to this point:
* openvpn-CVE-2020-15078.patch
* openvpn-CVE-2020-11810.patch
* openvpn-CVE-2018-7544.patch
* openvpn-CVE-2018-9336.patch
* Sat Dec 04 2021 jengelh@inai.de
- Avoid bashisms and use POSIX sh syntax.
- Use more efficient find commands.
- Trim marketing filler words from description.
* Sat Oct 16 2021 dmueller@suse.com
- update to 2.5.4:
* fix prompting for password on windows console if stderr redirection
is in use - this breaks 2.5.x on Win11/ARM, and might also break
on Win11/adm64 when released.
* fix setting MAC address on TAP adapters (--lladdr) to use sitnl
(was overlooked, and still used "ifconfig" calls)
* various improvements for man page building (rst2man/rst2html etc)
* minor bugfix with IN6_IS_ADDR_UNSPECIFIED() use (breaks build on
at least one platform strictly checking this)
* fix minor memory leak under certain conditions in add_route() and
add_route_ipv6()
* documentation improvements
* copyright updates where needed
* better error reporting when win32 console access fails
* Thu Aug 05 2021 max@suse.com
- Update to 2.5.3:
* Removal of BF-CBC support in default configuration
* ** POSSIBLE INCOMPATIBILITY ***
See section "DATA CHANNEL CIPHER NEGOTIATION" in openvpn(8).
* Connections setup is now much faster
* Support ChaCha20-Poly1305 cipher in the OpenVPN data channel
* Improved TLS 1.3 support when using OpenSSL 1.1.1 or newer
* Client-specific tls-crypt keys (--tls-crypt-v2)
* Improved Data channel cipher negotiation
* HMAC based auth-token support for seamless reconnects to
standalone servers or a group of servers
* Asynchronous (deferred) authentication support for auth-pam
plugin
* Asynchronous (deferred) support for client-connect scripts and
plugins
* Support IPv4 configs with /31 netmasks
* 802.1q VLAN support on TAP servers
* Support IPv6-only tunnels
* New option --block-ipv6 to reject all IPv6 packets (ICMPv6)
* Support Virtual Routing and Forwarding (VRF)
* Netlink integration (OpenVPN no longer needs to execute
ifconfig/route or ip commands)
* Obsoletes openvpn-2.3.9-Fix-heap-overflow-on-getaddrinfo-result.patch
- bsc#1062157: The fix for bsc#934237 causes problems with the
crypto self-test of newer openvpn versions.
Remove openvpn-2.3.x-fixed-multiple-low-severity-issues.patch .
* Mon May 31 2021 dmueller@suse.com
- update to 2.4.11 (bsc#1185279):
* CVE-2020-15078 see https://community.openvpn.net/openvpn/wiki/SecurityAnnouncements
* This bug allows - under very specific circumstances - to trick a server using
delayed authentication (plugin or management) into returning a PUSH_REPLY
before the AUTH_FAILED message, which can possibly be used to gather
information about a VPN setup.
* In combination with "--auth-gen-token" or an user-specific token auth
solution it can be possible to get access to a VPN with an
otherwise-invalid account.
* Fix potential NULL ptr crash if compiled with DMALLOC
- drop sysv init support, it hasn't build successfully in ages
and is build-disabled in devel project
* Sun Apr 25 2021 suse-beta@cboltz.de
- update 'rcopenvpn' to work without /etc/rc.status (boo#1185273)
* Wed Jan 06 2021 dmueller@suse.com
- update to 2.4.10:
- OpenVPN client will now announce the acceptable ciphers to the server
(IV_CIPHER=...), so NCP cipher negotiation works better
- Parse static challenge response in auth-pam plugin
- Accept empty password and/or response in auth-pam plugin
- Log serial number of revoked certificate
- Fix tls_ctx_client/server_new leaving error on OpenSSL error stack
- Fix auth-token not being updated if auth-nocache is set
(this should fix all remaining client-side bugs for the combination
"auth-nocache in client-config" + "auth-token in use on the server")
- Fix stack overflow in OpenSolaris and *BSD NEXTADDR()
- Fix error detection / abort in --inetd corner case (#350)
- Fix TUNSETGROUP compatibility with very old Linux systems (#1152)
- Fix handling of 'route remote_host' for IPv6 transport case
(#1247 and #1332)
- Fix --show-gateway for IPv6 on NetBSD/i386 (#734)
- A number of documentation improvements / clarification fixes.
- Fix line number reporting on config file errors after <inline> segments
- Fix fatal error at switching remotes (#629)
- socks.c: fix alen for DOMAIN type addresses, bump up buffer sizes (#848)
- Switch "ks->authenticated" assertion failure to returning false (#1270)
- refresh 0001-preform-deferred-authentication-in-the-background.patch
openvpn-2.3.x-fixed-multiple-low-severity-issues.patch against 2.4.10
* Fri Sep 11 2020 dmueller@suse.com
- update to 2.4.9 (CVE-2020-11810, bsc#1169925O):
* Allow unicode search string in --cryptoapicert option (Windows)
* Skip expired certificates in Windows certificate store (Windows) (trac #966)
* OpenSSL: Fix --crl-verify not loading multiple CRLs in one file (trac #623)
* fix condition where a client's session could "float" to a new IP address that is not authorized ("fix illegal client float").
This can be used to disrupt service to a freshly connected client (no session
keys negotiated yet). It can not be used to inject or steal VPN traffic.
CVE-2020-11810).
* fix combination of async push (deferred auth) and NCP (trac #1259)
* Fix OpenSSL 1.1.1 not using auto elliptic curve selection (trac #1228)
* Fix OpenSSL error stack handling of tls_ctx_add_extra_certs
* mbedTLS: Make sure TLS session survives move (trac #880)
* Fix OpenSSL private key passphrase notices
* Fix building with --enable-async-push in FreeBSD (trac #1256)
* Fix broken fragmentation logic when using NCP (trac #1140)
* Wed Aug 26 2020 fbui@suse.com
- Modernize openvpn.service
* /var/run has been obsoleted since a long time.
* on reload, send HUP signal directly rather than relying on
killproc to look for the main process.
* Wed Aug 26 2020 fbui@suse.com
- Explicitly requires sysvinit-tools as some of the tools shipped by
this package are used in various places regardless of whether
openvpn is built for systemd or non systemd systems.
For the context: sysvinit-tools was pulled in by systemd since 2014
but it's no longer the case so better to be safe than sorry.
* Wed Mar 04 2020 fabian@ritter-vogt.de
- Fix inconsistency in openvpn.service:
* It uses the unescape instance name as config file basename,
so use that in the description as well
* Fri Jan 24 2020 dimstar@opensuse.org
- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
shortcut through the -mini flavors.
- Use %systemd_ordering instead of systemd_requires: in fact,
systemd is not a hard requirement for openvpn. But in case a
system is being installed with systemd, we want systemd to be
there before openvpn is being installed.
* Tue Jan 07 2020 bjorn.lie@gmail.com
- Update to version 2.4.8:
* mbedtls: fix segfault by calling mbedtls_cipher_free() in
cipher_ctx_free()
* cleanup: Remove RPM openvpn.spec build approach
* docs: Update INSTALL
* build: Package missing mock_msg.h
* Increase listen() backlog queue to 32
* Force combinationation of --socks-proxy and --proto UDP to use
IPv4.
* Wrong FILETYPE in .rc files
* Do not set pkcs11-helper 'safe fork mode'
* tests/t_lpback.sh: Switch sed(1) to POSIX-compatible regex.
* Fix various compiler warnings
* Fix regression, reinstate LibreSSL support.
* man: correct the description of --capath and --crl-verify
regarding CRLs
* Fix typo in NTLM proxy debug message
* Ignore --pull-filter for --mode server
* openssl: Fix compilation without deprecated OpenSSL 1.1 APIs
* Better error message when script fails due to script-security
setting
* Correct the return value of cryptoapi RSA signature callbacks
* Handle PSS padding in cryptoapicert
* cmocka: use relative paths
* Fix documentation of tls-verify script argument
* Thu Dec 19 2019 dimstar@opensuse.org
- BuildRequire pkgconfig(libsystemd) instead of systemd-devel:
Allow OBS to shortcut through the -mini flavors.
* Wed Sep 18 2019 michal.hrusecky@opensuse.org
- Add p11kit build time dependency for pkcs providers autodetection
* Mon Jul 29 2019 max@suse.com
- Clarify in the service file that the reload action doesn't work
when dropping root privileges (boo#1142830).
* Tue Jun 25 2019 michael@stroeder.com
- Updated openvpn.keyring with public key downloaded from
https://swupdate.openvpn.net/community/keys/security-key-2019.asc
* Thu Feb 21 2019 fbui@suse.com
- Drop use of $FIRST_ARG in openvpn.spec
The use of $FIRST_ARG was probably required because of the
%service_* rpm macros were playing tricks with the shell positional
parameters. This is bad practice and error prones so let's assume
that no macros should do that anymore and hence it's safe to assume
that positional parameters remains unchanged after any rpm macro
call.
* Wed Feb 20 2019 michael@stroeder.com
- Update to 2.4.7:
Adam Ciarcin?ski (1):
* Fix subnet topology on NetBSD (2.4).
Antonio Quartulli (3):
* add support for %lu in argv_printf and prevent ASSERT
* buffer_list: add functions documentation
* ifconfig-ipv6(-push): allow using hostnames
Arne Schwabe (7):
* Properly free tuntap struct on android when emulating persist-tun
* Add OpenSSL compat definition for RSA_meth_set_sign
* Add support for tls-ciphersuites for TLS 1.3
* Add better support for showing TLS 1.3 ciphersuites in --show-tls
* Use right function to set TLS1.3 restrictions in show-tls
* Add message explaining early TLS client hello failure
* Fallback to password authentication when auth-token fails
Christian Ehrhardt (1):
* systemd: extend CapabilityBoundingSet for auth_pam
David Sommerseth (1):
* plugin: Export base64 encode and decode functions
Gert Doering (3):
* Add %d, %u and %lu tests to test_argv unit tests.
* Fix combination of --dev tap and --topology subnet across multiple platforms.
* Add 'printing of port number' to mroute_addr_print_ex() for v4-mapped v6.
Gert van Dijk (1):
* Minor reliability layer documentation fixes
James Bekkema (1):
* Resolves small IV_GUI_VER typo in the documentation.
Jonathan K. Bullard (1):
* Clarify and expand management interface documentation
Lev Stipakov (5):
* Refactor NCP-negotiable options handling
* init.c: refine functions names and description
* interactive.c: fix usage of potentially uninitialized variable
* options.c: fix broken unary minus usage
* Remove extra token after #endif
Richard van den Berg via Openvpn-devel (1):
* Fix error message when using RHEL init script
Samy Mahmoudi (1):
* man: correct a --redirection-gateway option flag
Selva Nair (7):
* Replace M_DEBUG with D_LOW as the former is too verbose
* Correct the declaration of handle in 'struct openvpn_plugin_args_open_return'
* Bump version of openvpn plugin argument structs to 5
* Move get system directory to a separate function
* Enable dhcp on tap adapter using interactive service
* Pass the hash without the DigestInfo header to NCryptSignHash()
* White-list pull-filter and script-security in interactive service
Simon Rozman (2):
* Add Interactive Service developer documentation
* Detect TAP interfaces with root-enumerated hardware ID
Steffan Karger (7):
* man: add security considerations to --compress section
* mbedtls: print warning if random personalisation fails
* Fix memory leak after sighup
* travis: add OpenSSL 1.1 Windows build
* Fix --disable-crypto build
* Don't print OCC warnings about 'key-method', 'keydir' and 'tls-auth'
* buffer_list_aggregate_separator(): simplify code
* Fri Apr 27 2018 max@suse.com
- Update to 2.4.6:
* CVE-2018-9336, bsc#1090839: Fix potential double-free() in
Interactive Service
* Delete the IPv6 route to the "connected" network on tun close
* Management: warn about password only when the option is in use
* Avoid overflow in wakeup time computation
* Tue Apr 10 2018 max@suse.com
- Remove --askpass again, because it was also asking for a password
when none was needed. As a workaround for keys that need a
password, the "askpass" statement should be added to the config
file (bsc#1078026).
- Use Type=notify in openvpn.service to reflect what openvpn is
actually doing.
- Import the new signing key from upstream.
- Remove obsolete configure switch --enable-password-save .
* Tue Mar 13 2018 avindra@opensuse.org
- Update to 2.4.5
* New features
+ The new option --tls-cert-profile can be used to restrict the
set of allowed crypto algorithms in TLS certificates in mbed
TLS builds. The default profile is 'legacy' for now, which
allows SHA1+, RSA-1024+ and any elliptic curve certificates.
The default will be changed to the 'preferred' profile in the
future, which requires SHA2+, RSA-2048+ and any curve.
+ openvpnserv: Add support for multi-instances (to support
multiple parallel OpenVPN installations, like EduVPN and
regular OpenVPN)
+ Use P_DATA_V2 for server->client packets too (better packet
alignment)
+ improve management interface documentation
(bsc#1085803, CVE-2018-7544)
+ rework registry key handling for OpenVPN service, notably
making most registry values optional, falling back to
reasonable defaults
+ accept IPv6 address for pushed "dhcp-option DNS ..." (make
OpenVPN 2 option compatible with OpenVPN 3 iOS and Android
clients)
* Bug fixes
+ Fix --tls-version-min and --tls-version-max for OpenSSL 1.1+
+ Fix lots of compiler warnings (format string, type casts, ...)
+ reload HTTP proxy credentials when moving to the next
connection profile
+ Fix build with LibreSSL (multiple times)
+ Remove non-useful warning on pushed tun-ipv6 option.
+ autoconf: Fix engine checks for openssl 1.1
+ lz4: Rebase compat-lz4 against upstream v1.7.5
+ lz4: Fix broken builds when pkg-config is not present but
system library is
+ Fix '--bind ipv6only'
+ Allow learning iroutes with network made up of all 0s
- Includes 2.4.4
* Bug fixes
+ Fix issues when a pushed cipher via the Negotiable Crypto
Parameters (NCP) is rejected by the remote side
+ Ignore --keysize when NCP have resulted in a changed cipher
+ Configurations using --auth-nocache and the management
interface to provide user credentials (like NetworkManager)
on client side with servers implementing authentication
tokens (for example, using --auth-gen-token) will now behave
correctly and not query the user for an, to them, unknown
authentication token on renegotiations of the tunnel.
+ Invalid or corrupt SOCKS port number when changing the proxy
via the management interface.
+ man page should now have proper escaping of hyphen/minus
characters and other minor corrections.
* User-visible Changes
+ Linux servers with systemd which use the openvpn-server@.service
unit file for server configurations will now utilize the
automatic restart feature in systemd. If the OpenVPN server
process dies unexpectedly, systemd will ensure the OpenVPN
configuration will be restarted automatically.
* Deprecated
+ --no-replay (will be removed in 2.5)
+ --keysize (will be removed in 2.6)
* Security
+ CVE-2017-12166: Fix bounds check for configurations using
- -key-method 1. Before this fix, attackers could send a
malformed packet to trigger a stack overflow. This is
considered to be a low risk issue, as --key-method 2 has
been the default since 2.0 (released on 2005-04-17). This
option is already deprecated in v2.4 and will be completely
removed in v2.5.
- Rebase openvpn-fips140-2.3.2.patch
- Drop 0002-Fix-bounds-check-in-read_key.patch
* upstreamed in c7e259160b28e94e4ea7f0ef767f8134283af255
- Partial cleanup with spec-cleaner
* Tue Feb 13 2018 max@suse.com
- Add --askpass to ExecStart, so that the user name and password
are correctly being queried from the user.
(bsc#1078026, boo#985798, boo#1031748)
- Use %service_add/del macros throughout (bsc#1038406).
* Thu Nov 23 2017 rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
* Tue Oct 10 2017 ndas@suse.de
- Do bound check in read_key before using values(CVE-2017-12166 bsc#1060877).
[+ 0002-Fix-bounds-check-in-read_key.patch]
* Fri Aug 11 2017 sebix+novell.com@sebix.at
- Do not package empty /usr/lib64/tmpfiles.d
* Fri Jun 23 2017 ndas@suse.de
- Update to 2.4.3 (bsc#1045489)
- Ignore auth-nocache for auth-user-pass if auth-token is pushed
- crypto: Enable SHA256 fingerprint checking in --verify-hash
- copyright: Update GPLv2 license texts
- auth-token with auth-nocache fix broke --disable-crypto builds
- OpenSSL: don't use direct access to the internal of X509
- OpenSSL: don't use direct access to the internal of EVP_PKEY
- OpenSSL: don't use direct access to the internal of RSA
- OpenSSL: don't use direct access to the internal of DSA
- OpenSSL: force meth->name as non-const when we free() it
- OpenSSL: don't use direct access to the internal of EVP_MD_CTX
- OpenSSL: don't use direct access to the internal of EVP_CIPHER_CTX
- OpenSSL: don't use direct access to the internal of HMAC_CTX
- Fix NCP behaviour on TLS reconnect.
- Remove erroneous limitation on max number of args for --plugin
- Fix edge case with clients failing to set up cipher on empty PUSH_REPLY.
- Fix potential 1-byte overread in TCP option parsing.
- Fix remotely-triggerable ASSERT() on malformed IPv6 packet.
- Preparing for release v2.4.3 (ChangeLog, version.m4, Changes.rst)
- refactor my_strupr
- Fix 2 memory leaks in proxy authentication routine
- Fix memory leak in add_option() for option 'connection'
- Ensure option array p[] is always NULL-terminated
- Fix a null-pointer dereference in establish_http_proxy_passthru()
- Prevent two kinds of stack buffer OOB reads and a crash for invalid input data
- Fix an unaligned access on OpenBSD/sparc64
- Missing include for socket-flags TCP_NODELAY on OpenBSD
- Make openvpn-plugin.h self-contained again.
- Pass correct buffer size to GetModuleFileNameW()
- Log the negotiated (NCP) cipher
- Avoid a 1 byte overcopy in x509_get_subject (ssl_verify_openssl.c)
- Skip tls-crypt unit tests if required crypto mode not supported
- openssl: fix overflow check for long --tls-cipher option
- Add a DSA test key/cert pair to sample-keys
- Fix mbedtls fingerprint calculation
- mbedtls: fix --x509-track post-authentication remote DoS (CVE-2017-7522)
- mbedtls: require C-string compatible types for --x509-username-field
- Fix remote-triggerable memory leaks (CVE-2017-7521)
- Restrict --x509-alt-username extension types
- Fix potential double-free in --x509-alt-username (CVE-2017-7521)
- Fix gateway detection with OpenBSD routing domains
* Wed Jun 14 2017 ndas@suse.de
- use %{_tmpfilesdir} for tmpfiles.d/openvpn.conf (bsc#1044223)
* Tue Jun 06 2017 ndas@suse.de
- Update to 2.4.2
- auth-token: Ensure tokens are always wiped on de-auth
- Make --cipher/--auth none more explicit on the risks
- Use SHA256 for the internal digest, instead of MD5
- Deprecate --ns-cert-type
- Deprecate --no-iv
- Support --block-outside-dns on multiple tunnels
- Limit --reneg-bytes to 64MB when using small block ciphers
- Fix --tls-version-max in mbed TLS builds
Details changelogs are avilable in
https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24
[*0001-preform-deferred-authentication-in-the-background.patch
* openvpn-2.3.x-fixed-multiple-low-severity-issues.patch
* openvpn-fips140-2.3.2.patch]
- pkcs11-helper-devel >= 1.11 is needed for openvpn-2.4.2
- cleanup the spec file
* Fri Apr 21 2017 ndas@suse.de
- Preform deferred authentication in the background to not
cause main daemon processing delays when the underlying pam mechanism (e.g.
ldap) needs longer to response (bsc#959511).
[+ 0001-preform-deferred-authentication-in-the-background.patch]
- Added fix for possible heap overflow on read accessing getaddrinfo
result (bsc#959714).
[+openvpn-2.3.9-Fix-heap-overflow-on-getaddrinfo-result.patch]
- Added a patch to fix multiple low severity issues (bsc#934237).
[+openvpn-2.3.x-fixed-multiple-low-severity-issues.patch]
* Sun Jan 22 2017 mrueckert@suse.de
- silence warning about %{_rundir}/openvpn
- for non systemd case: just package the %{_rundir}/openvpn in
the package
- for systemd case: call systemd-tmpfiles and own the dir as
%ghost in the filelist
* Sun Jan 22 2017 mrueckert@suse.de
- refreshed patches to apply cleanly again
openvpn-2.3-plugin-man.dif
openvpn-fips140-2.3.2.patch
* Sun Jan 22 2017 mrueckert@suse.de
- update to 2.3.14
- update year in copyright message
- Document the --auth-token option
- Repair topology subnet on FreeBSD 11
- Repair topology subnet on OpenBSD
- Drop recursively routed packets
- Support --block-outside-dns on multiple tunnels
- When parsing '--setenv opt xx ..' make sure a third parameter
is present
- Map restart signals from event loop to SIGTERM during
exit-notification wait
- Correctly state the default dhcp server address in man page
- Clean up format_hex_ex()
- enabled pkcs11 support
* Sat Dec 03 2016 michael@stroeder.com
- update to 2.3.13
- removed obsolete patch files openvpn-2.3.0-man-dot.diff and
openvpn-fips140-AES-cipher-in-config-template.patch
2016.11.02 -- Version 2.3.13
Arne Schwabe (2):
* Use AES ciphers in our sample configuration files and add a few modern 2.4 examples
* Incorporate the Debian typo fixes where appropriate and make show_opt default message clearer
David Sommerseth (4):
* t_client.sh: Make OpenVPN write PID file to avoid various sudo issues
* t_client.sh: Add support for Kerberos/ksu
* t_client.sh: Improve detection if the OpenVPN process did start during tests
* t_client.sh: Add prepare/cleanup possibilties for each test case
Gert Doering (5):
* Do not abort t_client run if OpenVPN instance does not start.
* Fix t_client runs on OpenSolaris
* make t_client robust against sudoers misconfiguration
* add POSTINIT_CMD_suf to t_client.sh and sample config
* Fix --multihome for IPv6 on 64bit BSD systems.
Ilya Shipitsin (1):
* skip t_lpback.sh and t_cltsrv.sh if openvpn configured --disable-crypto
Lev Stipakov (2):
* Exclude peer-id from pulled options digest
* Fix compilation in pedantic mode
Samuli Seppänen (1):
* Automatically cache expected IPs for t_client.sh on the first run
Steffan Karger (6):
* Fix unittests for out-of-source builds
* Make gnu89 support explicit
* cleanup: remove code duplication in msg_test()
* Update cipher-related man page text
* Limit --reneg-bytes to 64MB when using small block ciphers
* Add a revoked cert to the sample keys
2016.08.23 -- Version 2.3.12
Arne Schwabe (2):
* Complete push-peer-info documentation and allow IV_PLAT_VER for other platforms than Windows if the client UI supplies it.
* Move ASSERT so external-key with OpenSSL works again
David Sommerseth (3):
* Only build and run cmocka unit tests if its submodule is initialized
* Another fix related to unit test framework
* Remove NOP function and callers
Dorian Harmans (1):
* Add CHACHA20-POLY1305 ciphersuite IANA name translations.
Ivo Manca (1):
* Plug memory leak in mbedTLS backend
Jeffrey Cutter (1):
* Update contrib/pull-resolv-conf/client.up for no DOMAIN
Jens Neuhalfen (2):
* Add unit testing support via cmocka
* Add a test for auth-pam searchandreplace
Josh Cepek (1):
* Push an IPv6 CIDR mask used by the server, not the pool's size
Leon Klingele (1):
* Add link to bug tracker
Samuli Seppänen (2):
* Update CONTRIBUTING.rst to allow GitHub PRs for code review purposes
* Clarify the fact that build instructions in README are for release tarballs
Selva Nair (4):
* Make error non-fatal while deleting address using netsh
* Make block-outside-dns work with persist-tun
* Ignore SIGUSR1/SIGHUP during exit notification
* Promptly close the netcmd_semaphore handle after use
Steffan Karger (4):
* Fix polarssl / mbedtls builds
* Don't limit max incoming message size based on c2->frame
* Fix '--cipher none --cipher' crash
* Discourage using 64-bit block ciphers
* Mon Nov 28 2016 matwey.kornilov@gmail.com
- Require iproute2 explicitly. openvpn uses /bin/ip from iproute2,
so it should be installed
* Thu Sep 08 2016 astieger@suse.com
- Add an example for a FIPS 140-2 approved cipher configuration to
the sample configuration files. Fixes bsc#988522
adding openvpn-fips140-AES-cipher-in-config-template.patch
- remove gpg-offline signature verification, now a source service
* Tue May 10 2016 idonmez@suse.com
- Update to version 2.3.11
* Fixed port-share bug with DoS potential
* Fix buffer overflow by user supplied data
* Fix undefined signed shift overflow
* Ensure input read using systemd-ask-password is null terminated
* Support reading the challenge-response from console
* hardening: add safe FD_SET() wrapper openvpn_fd_set()
* Restrict default TLS cipher list
- Add BuildRequires on xz for SLE11
* Mon Jan 04 2016 idonmez@suse.com
- Update to version 2.3.10
* Warn user if their certificate has expired
* Fix regression in setups without a client certificate
* Wed Dec 16 2015 idonmez@suse.com
- Update to version 2.3.9
* Show extra-certs in current parameters.
* Do not set the buffer size by default but rely on the operation system default.
* Remove --enable-password-save option
* Detect config lines that are too long and give a warning/error
* Log serial number of revoked certificate
* Avoid partial authentication state when using --disabled in CCD configs
* Replace unaligned 16bit access to TCP MSS value with bytewise access
* Fix possible heap overflow on read accessing getaddrinfo() result.
* Fix isatty() check for good. (obsoletes revert-daemonize.patch)
* Client-side part for server restart notification
* Fix privilege drop if first connection attempt fails
* Support for username-only auth file.
* Increase control channel packet size for faster handshakes
* hardening: add insurance to exit on a failed ASSERT()
* Fix memory leak in auth-pam plugin
* Fix (potential) memory leak in init_route_list()
* Fix unintialized variable in plugin_vlog()
* Add macro to ensure we exit on fatal errors
* Fix memory leak in add_option() by simplifying get_ipv6_addr
* openssl: properly check return value of RAND_bytes()
* Fix rand_bytes return value checking
* Fix "White space before end tags can break the config parser"
* Thu Dec 03 2015 mt@suse.com
- Adjust /var/run to _rundir macro value in openvpn@.service too.
* Thu Aug 20 2015 mt@suse.com
- Removed obsolete --with-lzo-headers option, readded LFS_CFLAGS.
- Moved openvpn-plugin.h into a devel package, removed .gitignore
* Thu Aug 13 2015 idonmez@suse.com
- Add revert-daemonize.patch, looks like under systemd the stdin
and stdout are not TTYs by default. This reverts to previous
behaviour fixing bsc#941569
* Wed Aug 05 2015 idonmez@suse.com
- Update to version 2.3.8
* Report missing endtags of inline files as warnings
* Fix commit e473b7c if an inline file happens to have a
line break exactly at buffer limit
* Produce a meaningful error message if --daemon gets in the way of
asking for passwords.
* Document --daemon changes and consequences (--askpass, --auth-nocache)
* Del ipv6 addr on close of linux tun interface
* Fix --askpass not allowing for password input via stdin
* Write pid file immediately after daemonizing
* Fix regression: query password before becoming daemon
* Fix using management interface to get passwords
* Fix overflow check in openvpn_decrypt()
* Tue Jun 09 2015 idonmez@suse.com
- Update to version 2.3.7
* down-root plugin: Replaced system() calls with execve()
* sockets: Remove the limitation of --tcp-nodelay to be server-only
* pkcs11: Load p11-kit-proxy.so module by default
* New approach to handle peer-id related changes to link-mtu
* Fix incorrect use of get_ipv6_addr() for iroute options
* Print helpful error message on --mktun/--rmtun if not available
* Explain effect of --topology subnet on --ifconfig
* Add note about file permissions and --crl-verify to manpage
* Repair --dev null breakage caused by db950be85d37
* Correct note about DNS randomization in openvpn.8
* Disallow usage of --server-poll-timeout in --secret key mode
* Slightly enhance documentation about --cipher
* On signal reception, return EAI_SYSTEM from openvpn_getaddrinfo()
* Use EAI_AGAIN instead of EAI_SYSTEM for openvpn_getaddrinfo()
* Fix --redirect-private in --dev tap mode
* Updated manpage for --rport and --lport
* Properly escape dashes on the man-page
* Improve documentation in --script-security section of the man-page
* Really fix '--cipher none' regression
* Set tls-version-max to 1.1 if cryptoapicert is used
* Account for peer-id in frame size calculation
* Disable SSL compression
* Fix frame size calculation for non-CBC modes.
* Allow for CN/username of 64 characters (fixes off-by-one)
* Re-enable TLS version negotiation by default
* Remove size limit for files inlined in config
* Improve --tls-cipher and --show-tls man page description
* Re-read auth-user-pass file on (re)connect if required
* Clarify --capath option in manpage
* Call daemon() before initializing crypto library
* Mon Mar 02 2015 mt@suse.de
- Fixed to use correct sha digest data length and in fips mode,
use aes instead of the disallowed blowfish crypto (boo#914166).
- Fixed to provide actual plugin/doc dirs in openvpn(8) man page.
* Mon Dec 01 2014 mt@suse.de
- Update to version 2.3.6 fixing a denial-of-service vulnerability
where an authenticated client could stop the server by triggering
a server-side ASSERT (bnc#907764,CVE-2014-8104).
See ChangeLog file for a complete list of changes.
* Thu Oct 30 2014 idonmez@suse.com
- Update to version 2.3.5
* See included changelog
- Depend on systemd-devel for the daemon check functionality
* Mon Aug 25 2014 idonmez@suse.com
- Update to version 2.3.4
* Add support for client-cert-not-required for PolarSSL.
* Introduce safety check for http proxy options.
* Mon May 26 2014 crrodriguez@opensuse.org
- Build with large file support in 32 bit systems.
* Sun May 11 2014 coolo@suse.com
- use %_rundir for %ghost directory - leaving /var/run everywhere
else
* Tue Jan 14 2014 mt@suse.de
- Updated README.SUSE, documented also the rcopenvpn compatibility
wrapper script (bnc#848070).
* Thu Jan 09 2014 meissner@suse.com
- openvpn-fips140-2.3.2.patch: Allow usage of SHA1 instead of MD5 in
some internal checking routines. This allows operation in FIPS 140-2
mode.
* Tue Dec 17 2013 mt@suse.de
- Readded rcopenvpn helper script under systemd (bnc#848070)
* Thu Oct 31 2013 mt@suse.de
- Fixed invalid mode in exec bit removal call from doc files
* Tue Aug 27 2013 lmuelle@suse.com
- Add a section about how to control all or a named configuration with the
help of systemctl to the README.SUSE file.
* Mon Jun 03 2013 mrdocs@opensuse.org
- Update to 2.3.2
+Fixes since 2.3.0
- Remove dead code path and putenv functionality
- Remove unused function xor
- Move static prototype definition from header into c file
- Remove unused function no_tap_ifconfig
- fix build with automake 1.13(.1)
- Fix corner case in NTLM authentication (trac #172)
- Update README.IPv6 to match what is in 2.3.0
- Repair "tcp server queue overflow" brokenness, more <stdbool.h> fallout.
- Permit pool size of /64.../112 for ifconfig-ipv6-pool
- Add MIN() compatibility macro
- Fix directly connected routes for "topology subnet" on Solaris.
- close more file descriptors on exec
- Ignore UTF-8 byte order mark
- reintroduce --no-name-remapping option
- make --tls-remote compatible with pre 2.3 configs
- add new option for X.509 name verification
- add man page patch for missing options
- Fix parameter listing in non-debug builds at verb 4
- (updated) [PATCH] Warn when using verb levels >=7 without debug
- Enable TCP_NODELAY configuration on FreeBSD.
- Updated README
- Cleaned up and updated INSTALL
- PolarSSL-1.2 support
- Improve PolarSSL key_state_read_{cipher, plain}text messages
- Improve verify_callback messages
- Config compatibility patch. Added translate_cipher_name.
- Switch to IANA names for TLS ciphers.
- Fixed autoconf script to properly detect missing pkcs11 with polarssl.
- Use constant time memcmp when comparing HMACs in openvpn_decrypt.
* Mon May 06 2013 mt@suse.de
- Try to migrate openvpn.service autostart to openvpn@<CONF>.service
instance enablement.
* Tue Apr 23 2013 mt@suse.de
- Fixed to enable systemd support in configure
- Fixed openvpn-tmpfile.conf to use GID root, there is no openvpn group.
- Added openvpn.target file allowing to handle all instances at once.
- Fixed to install the service template correctly as openvpn@.service.
Use "systemctl enable openvpn@foo.service" to enable instance using
/etc/openvpn/foo.conf.
- Disabled systemd variant of restart on update rpm macro, adopted other
macros to use openvpn.target to e.g. stop all instances on uninstall.
* Tue Mar 26 2013 aj@suse.com
- Remove _unitdir definition, it is provided by systemd.
- Install service file without x permissions
* Mon Mar 25 2013 p.drouand@gmail.com
Update to version 2.3.0:
* Full IPv6 support
* SSL layer modularised, enabling easier implementation for other SSL libraries
* PolarSSL support as a drop-in replacement for OpenSSL
* New plug-in API providing direct certificate access, improved logging API
and easier to extend in the future
* Added 'dev_type' environment variable to scripts and plug-ins - which is
set to 'TUN' or 'TAP'
* New feature: --management-external-key - to provide access to the encryption
keys via the management interface
* New feature: --x509-track option, more fine grained access to X.509 fields
in scripts and plug-ins
* New feature: --client-nat support
* New feature: --mark which can mark encrypted packets from the tunnel, suitable
for more advanced routing and firewalling
* New feature: --management-query-proxy - manage proxy settings via the management
interface (supercedes --http-proxy-fallback)
* New feature: --stale-routes-check, which cleans up the internal routing table
* New feature: --x509-username-field, where other X.509v3 fields can be used for
the authentication instead of Common Name
* Improved client-kill management interface command
* Improved UTF-8 support - and added --compat-names to provide backwards compatibility
with older scripts/plug-ins
* Improved auth-pam with COMMONNAME support, passing the certificate's common
name in the PAM conversation
* More options can now be used inside <connection> blocks
* Completely new build system, enabling easier cross-compilation and Windows builds
* Much of the code has been better documented
* Many documentation updates
* Plenty of bug fixes and other code clean-ups
- Add systemd native support for OpenSUSE > 12.1
- Adapt patchs to upstream release:
* openvpn-2.1-plugin-man.dif > openvpn-2.3-plugin-man.dif
* openvpn-2.1.0-man-dot.diff > openvpn-2.3.0-man-dot.diff
- Remove obsolete patchs; fixed or merged on upstream release:
* 0001-Use-SSL_MODE_RELEASE_BUFFERS-if-available.patch
* openvpn-2.1-plugin-build.dif
* openvpn-2.1-systemd-passwd.patch
- Rebase specfile to upstream changes:
* easy-rsa is not provided anymore with main package
* remove %clean section
* autoreconf -fi is no needed
- Update openvpn.keyring file for upstream release asc key
* Mon Jan 28 2013 mt@suse.com
- Join openvpn.service systemd cgroup in start when needed, e.g.
when starting with further parameters. (bnc#781106)
* Thu Nov 29 2012 sbrabec@suse.cz
- Verify GPG signature.
* Fri Sep 21 2012 coolo@suse.com
- fix ciaran's previous license entry. the license has a SUSE prefix
* Thu Sep 20 2012 mt@suse.com
- Fixed openvpn init script to not map reopen to reload so the
reopen code is without any effect (bnc#781106).
- Added requested OPENVPN_AUTOSTART variable allowing to provide
an optional list of config names started by default (bnc#692440).
* Wed Aug 22 2012 cfarrell@suse.com
- license update: GPL-2.0-with-openssl-exception and LGPL-2.1
openssl has an openssl exception (also, it is GPL-2.0 only)
* Thu Mar 29 2012 mt@suse.com
- Fixed SLES build readding Group tags to sub-packages in spec,
not require libselinux-devel on SLE-10 and datadir/doc cleanup.
* Wed Feb 15 2012 mt@suse.com
- Updated to openvpn-2.2.2:
- Warn once, that IPv6 in tun mode is not supported in OpenVPN 2.2
- Pkcs11 support built into the Windows version
- Fixed a bug in the Windows TAP-driver
* Thu Dec 08 2011 aj@suse.de
- Fix source URLs.
* Fri Dec 02 2011 coolo@suse.com
- add automake as buildrequire to avoid implicit dependency
* Mon Aug 29 2011 mt@suse.com
- Marked /var/run/openvpn as ghost (bnc#710270), man page and
other rpmlint warning fixes
* Tue Aug 23 2011 crrodriguez@opensuse.org
- BuildRequires libselinux-devel
- Use SSL_MODE_RELEASE_BUFFERS to keep memory usage low, sent
upstream as https://community.openvpn.net/openvpn/ticket/157
* Mon Aug 22 2011 fcrozat@novell.com
- Add openvpn-2.1-systemd-passwd.patch / modify openvpn.init to
support systemd password query (bnc#675406)
* Mon Jul 11 2011 mt@suse.de
- Updated to openvpn-2.2.1, a new version series providing several
new features. This version fixes build issues and provides
updated easy-rsa for OpenSSL 1.0.0 (fixes Trac ticket #125),
- Adopted spec file, enabled saving password in a file and to
specify an alternative username in x509 cert.
- Removed X-Interactive from init script again, as systemd isn't
able to use it correctly [any more?] (bnc#675406). We will
address it later and probably use /bin/systemd-ask-password.
* Tue Mar 15 2011 crrodriguez@opensuse.org
- KVPNC is unable to parse openvpn version [bnc#679153]
* Thu Feb 17 2011 mt@suse.de
- Added X-Interactive: true LSB tag to the init script.
* Tue Nov 16 2010 mt@suse.de
- Updated to openvpn 2.1.4, providing several bug fixes and
improvements, such as:
* Fix of a problem with special case route targets
* Try to ensure, that the tun/tap interface gets closed on
non-graceful aborts.
* Several AUTH_FAILED reporting fixes causing the connection
to fail without any error indication.
* Enable exponential backoff in reliability layer retransmits.
* Proxy improvements
Please review the ChangeLog file for a complete and exact list.
* Wed Sep 08 2010 cristian.rodriguez@opensuse.org
- Do not include build date in binaries
* Tue Jun 15 2010 mt@suse.de
- Improved netconfig based client up and down sample scripts.
* Fri Jun 11 2010 anschneider@exsuse.de
- Added netconfig based client up and down scripts to samples.
* Thu Mar 11 2010 mt@suse.de
- Updated to openvpn 2.1.1; linux related changes since 2.1_rc20:
* Fixed a couple issues in sample plugins auth-pam.c and
down-root.c.
(1) Fail gracefully rather than segfault if calloc returns NULL.
(2) The openvpn_plugin_abort_v1 function can potentially be
called with handle == NULL. Add code to detect this case,
and if so, avoid dereferencing pointers derived from handle
(Thanks to David Sommerseth for finding this bug).
* Documented "multihome" option in the man page.
* Added a hard failure when peer provides a certificate chain
with depth > 16. Previously, a warning was issued.
* Added additional session renegotiation hardening. OpenVPN has
always required that mid-session renegotiations build up a new
SSL/TLS session from scratch. While the client certificate
common name is already locked against changes in mid-session
TLS renegotiations, we now extend this locking to the
auth-user-pass username as well as all certificate content in
the full client certificate chain.
- Improved openvpn init script adding messages giving a hint about
pid write failure and to look into the log messages (bnc#559041).
- Added -fno-strict-aliasing to compile flags in the spec file.
* Thu Dec 17 2009 mt@suse.de
- Updated to openvpn 2.1 2.1_rc20, fixing problems in route and
option handling provided by the from server (bnc#552440).
For complete list of changes, see ChangeLog file, here just
the IMO most important:
* Fixed a bug introduced in 2.1_rc17 (svn r4436) where using
the redirect-gateway option by itself, without any extra
parameters, would cause the option to be ignored.
* Optimized PUSH_REQUEST handshake sequence to shave several
seconds off of a typical client connection initiation.
* The maximum number of "route" directives (specified in the
config file or pulled from a server) can now be configured
via the new "max-routes" directive.
* Eliminated the limitation on the number of options that can
be pushed to clients, including routes. Previously, all
pushed options needed to fit within a 1024 byte options
string.
* Added --server-poll-timeout option : when polling possible
remote servers to connect to in a round-robin fashion,
spend no more than n seconds waiting for a response before
trying the next server.
* Added the ability for the server to provide a custom reason
string when an AUTH_FAILED message is returned to the client.
This string can be set by the server-side managment interface
and read by the client-side management interface.
* client-kill management interface command, when issued on server,
will now send a RESTART message to client. This feature is
intended to make UDP clients respond the same as TCP clients
in the case where the server issues a RESTART message in order
to force the client to reconnect and pull a new options/route
list.
* Fri Oct 02 2009 mt@suse.de
- Added network-remotefs to init script dependencies (bnc#522279).
* Wed Jun 10 2009 mt@suse.de
- Updated to openvpn 2.1 [2.1_rc18] series (fate#305289).
- Enabled pkcs11-helper for openSUSE > 10.3 (bnc#487558).
- Adopted spec file and patches, improved init script.
- Disabled installation of easy-rsa for Windows.
* Tue Feb 17 2009 mt@suse.de
- Improved init script to show config name in action messages
and allow to specify a config name in the second argument.
* Mon Dec 01 2008 mt@suse.de
- Removed restart_on_update rpm install hook that may break the
update process, e.g. when openvpn asks for auth data or the
update process is running over the tunnel (bnc#450390).
* Tue Oct 28 2008 mt@suse.de
- Fixed init script to handle pid files correctly (bnc#435421).
* Thu May 29 2008 mt@suse.de
- Added $time $named to Should-Start in the init script to avoid
time related certificate errors and name resolving problems.
- Added iproute2 to BuildRequires to avoid openvpn rely on PATH.
* Mon May 26 2008 mt@suse.de
- Reverted init script changes adding startproc, since they break
user auth query and multiple tunnels (bnc#394360, bnc#394353).
* Thu May 22 2008 mt@suse.de
- Added -lpam to LDFLAGS of openvpn, because linking the openvpn
auth-pam plugin against pam is not sufficient. Many pam modules
that are loaded by pam during the authentication process are not
linked against pam and contain undefined symbols, causing the
authentication to fail (bnc#334773).
- Replaced patch loading plugins from /usr/%_lib/openvpn/plugin/lib
with -rpath linker flags (bnc#334773).
- Fixed init script to use startproc to return 0 when started twice.
* Tue Feb 19 2008 mt@suse.de
- Fixed spec file to not set pie flags when building plugins
* Thu Jan 17 2008 mt@suse.de
- Bug #334773: Enabled build of down-root and auth-pam plugins,
sub-packaged as openvpn-auth-pam-plugin/down-root-plugin.
- Added patch to load plugins from /usr/%_lib/openvpn/plugin/lib
first, when the plugin name is specified as basename only.
- Added patch adoptiong plugin path informations in openvpn.8.
- Added patch to build plugins with RPM_OPT_FLAGS.
- Fixed init script to use Should-Start/Stop LSB info tags.
- Bug #343106: Enabled iproute2 support / usage
* Mon Jun 04 2007 mt@suse.de
- fixed easy-rsa installation (no exec in doc directory)
- improved spec to use configure directory variables and
cleaned up macro calls in RPM pre/post scripts.
- fixed openvpn binary check in the init script.
* Fri Oct 27 2006 mt@suse.de
- upstream 2.0.9, Windows related fixes only
* Windows installer updated with OpenSSL 0.9.7l DLLs to fix
published vulnerabilities.
* Fixed TAP-Win32 bug that caused BSOD on Windows Vista
(Henry Nestler). The TAP-Win32 driver has now been
upgraded to version 8.4.
* Wed Sep 27 2006 poeml@suse.de
- upstream 2.0.8
* Windows installer updated with OpenSSL 0.9.7k DLLs to fix
RSA Signature Forgery (CVE-2006-4339).
* No changes to OpenVPN source code between 2.0.7 and 2.0.8.
* Fri Jun 23 2006 poeml@suse.de
- upstream 2.0.7, with bug fixes:
* When deleting routes under Linux, use the route metric
as a differentiator to ensure that the route teardown
process only deletes the identical route which was originally
added via the "route" directive (Roy Marples).
* Fixed bug where --server directive in --dev tap mode
claimed that it would support subnets of /30 or less
but actually would only accept /29 or less.
* Extend byte counters to 64 bits (M. van Cuijk).
* Better sanity checking of --server and --server-bridge
IP pool ranges, so as not to hit the assertion at
pool.c:119 (2.0.5).
* Fixed bug where --daemon and --management-query-passwords
used together would cause OpenVPN to block prior to
daemonization.
* Fixed client/server race condition which could occur
when --auth-retry interact is set and the initially
provided auth-user-pass credentials are incorrect,
forcing a username/password re-query.
* Fixed bug where if --daemon and --management-hold are
used together, --user or --group options would be ignored.
* fix for CVE-2006-1629 integrated (disallow "setenv" to be pushed
to clients from the server)
- build with fPIE/pie on SUSE 10.0 or newer, or on any other platform
* Wed Apr 19 2006 poeml@suse.de
- security fix (CVE-2006-1629): disallow "setenv" to be pushed to
clients from the server [#165123]
* Wed Jan 25 2006 mls@suse.de
- converted neededforbuild to BuildRequires
* Thu Nov 03 2005 poeml@suse.de
- update to 2.0.5, with two security fixes -- see below. [#132003]
2005.11.02 -- Version 2.0.5
* Fixed bug in Linux get_default_gateway function
introduced in 2.0.4, which would cause redirect-gateway
on Linux clients to fail.
* Restored easy-rsa/2.0 tree (backported from 2.1 beta
series) which accidentally disappeared in
2.0.2 -> 2.0.4 transition.
2005.11.01 -- Version 2.0.4
* Security fix -- Affects non-Windows OpenVPN clients of
version 2.0 or higher which connect to a malicious or
compromised server. A format string vulnerability
in the foreign_option function in options.c could
potentially allow a malicious or compromised server
to execute arbitrary code on the client. Only
non-Windows clients are affected. The vulnerability
only exists if (a) the client's TLS negotiation with
the server succeeds, (b) the server is malicious or
has been compromised such that it is configured to
push a maliciously crafted options string to the client,
and (c) the client indicates its willingness to accept
pushed options from the server by having "pull" or
"client" in its configuration file (Credit: Vade79).
CVE-2005-3393
* Security fix -- Potential DoS vulnerability on the
server in TCP mode. If the TCP server accept() call
returns an error status, the resulting exception handler
may attempt to indirect through a NULL pointer, causing
a segfault. Affects all OpenVPN 2.0 versions.
CVE-2005-3409
* Fix attempt of assertion at multi.c:1586 (note that
this precise line number will vary across different
versions of OpenVPN).
* Added ".PHONY: plugin" to Makefile.am to work around
"make dist" issue.
* Fixed double fork issue that occurs when --management-hold
is used.
* Moved TUN/TAP read/write log messages from --verb 8 to 6.
* Warn when multiple clients having the same common name or
username usurp each other when --duplicate-cn is not used.
* Modified Windows and Linux versions of get_default_gateway
to return the route with the smallest metric
if multiple 0.0.0.0/0.0.0.0 entries are present.
2005.09.25 -- Version 2.0.3-rc1
* openvpn_plugin_abort_v1 function wasn't being properly
registered on Windows.
* Fixed a bug where --mode server --proto tcp-server --cipher none
operation could cause tunnel packet truncation.
* Tue Aug 30 2005 poeml@suse.de
- update to 2.0.2 [#106258] relevant changes:
* Fixed bug where "--proto tcp-server --mode p2p --management
host port" would cause the management port to not respond until
the OpenVPN peer connects.
* Modified pkitool script to be /bin/sh compatible (Johnny Lam).
* Tue Aug 23 2005 poeml@suse.de
- update to 2.0.1 [#106258]
* Security Fix -- DoS attack against server when run with "verb 0" and
without "tls-auth". If a client connection to the server fails
certificate verification, the OpenSSL error queue is not properly
flushed, which can result in another unrelated client instance on the
server seeing the error and responding to it, resulting in disconnection
of the unrelated client (CAN-2005-2531).
* Security Fix -- DoS attack against server by authenticated client.
This bug presents a potential DoS attack vector against the server
which can only be initiated by a connected and authenticated client.
If the client sends a packet which fails to decrypt on the server,
the OpenSSL error queue is not properly flushed, which can result in
another unrelated client instance on the server seeing the error and
responding to it, resulting in disconnection of the unrelated client
(CAN-2005-2532).
* Security Fix -- DoS attack against server by authenticated client.
A malicious client in "dev tap" ethernet bridging mode could
theoretically flood the server with packets appearing to come from
hundreds of thousands of different MAC addresses, causing the OpenVPN
process to deplete system virtual memory as it expands its internal
routing table. A --max-routes-per-client directive has been added
(default=256) to limit the maximum number of routes in OpenVPN's
internal routing table which can be associated with a given client
(CAN-2005-2533).
* Security Fix -- DoS attack against server by authenticated client.
If two or more client machines try to connect to the server at the
same time via TCP, using the same client certificate, and when
- -duplicate-cn is not enabled on the server, a race condition can
crash the server with "Assertion failed at mtcp.c:411"
(CAN-2005-2534).
* Fixed server bug where under certain circumstances, the client instance
object deletion function would try to delete iroutes which had never been
added in the first place, triggering "Assertion failed at mroute.c:349".
* Added --auth-retry option to prevent auth errors from being fatal
on the client side, and to permit username/password requeries in case
of error. Also controllable via new "auth-retry" management interface
command. See man page for more info.
* Added easy-rsa 2.0 scripts to the tarball in easy-rsa/2.0
* Fixed bug in openvpn.spec where rpmbuild --define 'without_pam 1'
would fail to build.
* Implement "make check" to perform loopback tests (Matthias Andree).
- drop obsolete patch which fixed finding lzo libraries
* Tue Jun 28 2005 mrueckert@suse.de
- The previous patch didnt work with lzo1 based distros. Fixed.
* Tue Jun 28 2005 cthiel@suse.de
- fixed build with lzo2 (added lzo2.diff)
* Wed Jun 22 2005 ro@suse.de
- build with fPIE/pie
* Thu Jun 02 2005 hvogel@suse.de
- lzo headers are in a subdirectory now
* Tue Apr 19 2005 cthiel@suse.de
- update to 2.0
* Thu Feb 17 2005 poeml@suse.de
- update to 2.0_rc14
- add README.SUSE
* Fri Jan 28 2005 poeml@suse.de
- update to 2.0_rc10
* Wed Dec 29 2004 poeml@suse.de
- update to 2.0_rc6
* Wed Dec 29 2004 poeml@suse.de
- update to 2.0_rc1 (closing #45979)
IMPORTANT: OpenVPN's default port number is now 1194, based on an
official port number assignment by IANA. OpenVPN 2.0-beta16 and
earlier used 5000 as the default port.
- > see http://openvpn.net/20notes.html
- remove lzo sources, which come in a separate package since 9.2
* Mon Jul 26 2004 poeml@suse.de
- update to 1.6_rc4
- bzip2 sources
* Sun Jan 11 2004 adrian@suse.de
- build as user
* Tue Dec 16 2003 wengel@suse.de
- update to version 1.5.0
* Sun Sep 07 2003 poeml@suse.de
- add an init script
- use RPM_OPT_FLAGS
- add /var/run/openvpn directory for pid files
* Thu Jul 31 2003 wengel@suse.de
- update to new version -> 1.4.2
* Tue May 27 2003 coolo@suse.de
- use BuildRoot
- package a bit more straightforward
* Mon May 19 2003 wengel@suse.de
- update to version 1.4.1
* Mon Jan 20 2003 wengel@suse.de
- initial package
/etc/openvpn /run/openvpn /usr/lib/systemd/system/openvpn.target /usr/lib/systemd/system/openvpn@.service /usr/lib/tmpfiles.d /usr/lib/tmpfiles.d/openvpn.conf /usr/sbin/openvpn /usr/sbin/rcopenvpn /usr/share/doc/packages/openvpn /usr/share/doc/packages/openvpn/AUTHORS /usr/share/doc/packages/openvpn/COPYRIGHT.GPL /usr/share/doc/packages/openvpn/ChangeLog /usr/share/doc/packages/openvpn/PORTS /usr/share/doc/packages/openvpn/README /usr/share/doc/packages/openvpn/README.SUSE /usr/share/doc/packages/openvpn/README.auth-pam /usr/share/doc/packages/openvpn/README.cmake.md /usr/share/doc/packages/openvpn/README.dco.md /usr/share/doc/packages/openvpn/README.down-root /usr/share/doc/packages/openvpn/README.ec /usr/share/doc/packages/openvpn/README.mbedtls /usr/share/doc/packages/openvpn/README.wolfssl /usr/share/doc/packages/openvpn/contrib /usr/share/doc/packages/openvpn/contrib/OCSP_check /usr/share/doc/packages/openvpn/contrib/OCSP_check/OCSP_check.sh /usr/share/doc/packages/openvpn/contrib/README /usr/share/doc/packages/openvpn/contrib/cmake /usr/share/doc/packages/openvpn/contrib/cmake/git-version.py /usr/share/doc/packages/openvpn/contrib/cmake/parse-version.m4.py /usr/share/doc/packages/openvpn/contrib/extract-crl /usr/share/doc/packages/openvpn/contrib/extract-crl/extractcrl.py /usr/share/doc/packages/openvpn/contrib/multilevel-init.patch /usr/share/doc/packages/openvpn/contrib/openvpn-fwmarkroute-1.00 /usr/share/doc/packages/openvpn/contrib/openvpn-fwmarkroute-1.00/README /usr/share/doc/packages/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.down /usr/share/doc/packages/openvpn/contrib/openvpn-fwmarkroute-1.00/fwmarkroute.up /usr/share/doc/packages/openvpn/contrib/pull-resolv-conf /usr/share/doc/packages/openvpn/contrib/pull-resolv-conf/client.down /usr/share/doc/packages/openvpn/contrib/pull-resolv-conf/client.up /usr/share/doc/packages/openvpn/contrib/vcpkg-manifests /usr/share/doc/packages/openvpn/contrib/vcpkg-manifests/mingw /usr/share/doc/packages/openvpn/contrib/vcpkg-manifests/mingw/vcpkg.json /usr/share/doc/packages/openvpn/contrib/vcpkg-manifests/windows /usr/share/doc/packages/openvpn/contrib/vcpkg-manifests/windows/vcpkg.json /usr/share/doc/packages/openvpn/contrib/vcpkg-ports /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/Fix-build-with-disable-shared.patch /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/config-w32-vc.h.in-indicate-OpenSSL.patch /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/nmake-compatibility-with-vcpkg-nmake.patch /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/pkcs11-helper-001-RFC7512.patch /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/pkcs11-helper-002-dynamic_loader_flags.patch /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/portfile.cmake /usr/share/doc/packages/openvpn/contrib/vcpkg-ports/pkcs11-helper/vcpkg.json /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets/arm64-windows-ovpn.cmake /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets/x64-mingw-ovpn.cmake /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets/x64-windows-ovpn.cmake /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets/x86-mingw-ovpn.cmake /usr/share/doc/packages/openvpn/contrib/vcpkg-triplets/x86-windows-ovpn.cmake /usr/share/doc/packages/openvpn/management-notes.txt /usr/share/doc/packages/openvpn/sample-config-files /usr/share/doc/packages/openvpn/sample-config-files/README /usr/share/doc/packages/openvpn/sample-config-files/client.conf /usr/share/doc/packages/openvpn/sample-config-files/firewall.sh /usr/share/doc/packages/openvpn/sample-config-files/home.up /usr/share/doc/packages/openvpn/sample-config-files/loopback-client /usr/share/doc/packages/openvpn/sample-config-files/loopback-server /usr/share/doc/packages/openvpn/sample-config-files/office.up /usr/share/doc/packages/openvpn/sample-config-files/openvpn-shutdown.sh /usr/share/doc/packages/openvpn/sample-config-files/openvpn-startup.sh /usr/share/doc/packages/openvpn/sample-config-files/server.conf /usr/share/doc/packages/openvpn/sample-config-files/tls-home.conf /usr/share/doc/packages/openvpn/sample-config-files/tls-office.conf /usr/share/doc/packages/openvpn/sample-keys /usr/share/doc/packages/openvpn/sample-keys/README /usr/share/doc/packages/openvpn/sample-keys/ca.crt /usr/share/doc/packages/openvpn/sample-keys/ca.key /usr/share/doc/packages/openvpn/sample-keys/client-ec.crt /usr/share/doc/packages/openvpn/sample-keys/client-ec.key /usr/share/doc/packages/openvpn/sample-keys/client-pass.key /usr/share/doc/packages/openvpn/sample-keys/client.crt /usr/share/doc/packages/openvpn/sample-keys/client.key /usr/share/doc/packages/openvpn/sample-keys/client.p12 /usr/share/doc/packages/openvpn/sample-keys/dh2048.pem /usr/share/doc/packages/openvpn/sample-keys/gen-sample-keys.sh /usr/share/doc/packages/openvpn/sample-keys/openssl.cnf /usr/share/doc/packages/openvpn/sample-keys/server-ec.crt /usr/share/doc/packages/openvpn/sample-keys/server-ec.key /usr/share/doc/packages/openvpn/sample-keys/server.crt /usr/share/doc/packages/openvpn/sample-keys/server.key /usr/share/doc/packages/openvpn/sample-keys/ta.key /usr/share/doc/packages/openvpn/sample-scripts /usr/share/doc/packages/openvpn/sample-scripts/auth-pam.pl /usr/share/doc/packages/openvpn/sample-scripts/bridge-start /usr/share/doc/packages/openvpn/sample-scripts/bridge-stop /usr/share/doc/packages/openvpn/sample-scripts/client-netconfig.down /usr/share/doc/packages/openvpn/sample-scripts/client-netconfig.up /usr/share/doc/packages/openvpn/sample-scripts/totpauth.py /usr/share/doc/packages/openvpn/sample-scripts/ucn.pl /usr/share/doc/packages/openvpn/sample-scripts/verify-cn /usr/share/licenses/openvpn /usr/share/licenses/openvpn/COPYING /usr/share/man/man5/openvpn-examples.5.gz /usr/share/man/man8/openvpn.8.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Wed Oct 30 00:29:02 2024