kexec-tools-2.0.27-8.el9 RPM for x86_64

From CentOS Stream 9 BaseOS for x86_64

kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.

Provides

• kexec-tools
• config(kexec-tools)
• kexec-tools(x86-64)

Requires

• /bin/sh
• /bin/sh
• /bin/sh
• /bin/sh
• /bin/sh
• /usr/bin/bash
• /usr/bin/sh
• binutils
• config(kexec-tools) = 2.0.27-8.el9
• coreutils
• dracut >= 050
• dracut-network >= 050
• dracut-squash >= 050
• ethtool
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.11)(64bit)
• libc.so.6(GLIBC_2.14)(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libc.so.6(GLIBC_2.2.5)(64bit)
• libc.so.6(GLIBC_2.25)(64bit)
• libc.so.6(GLIBC_2.27)(64bit)
• libc.so.6(GLIBC_2.3)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libc.so.6(GLIBC_2.7)(64bit)
• libdw.so.1()(64bit)
• libdw.so.1(ELFUTILS_0.122)(64bit)
• libdw.so.1(ELFUTILS_0.126)(64bit)
• libdw.so.1(ELFUTILS_0.143)(64bit)
• libelf.so.1()(64bit)
• libelf.so.1(ELFUTILS_1.0)(64bit)
• libelf.so.1(ELFUTILS_1.5)(64bit)
• libgcc_s.so.1()(64bit)
• libgcc_s.so.1(GCC_3.0)(64bit)
• libgcc_s.so.1(GCC_3.3.1)(64bit)
• liblzma.so.5()(64bit)
• liblzma.so.5(XZ_5.0)(64bit)
• liblzo2.so.2()(64bit)
• libsnappy.so.1()(64bit)
• libtinfo.so.6()(64bit)
• libz.so.1()(64bit)
• libz.so.1(ZLIB_1.2.0)(64bit)
• libz.so.1(ZLIB_1.2.2.3)(64bit)
• libzstd.so.1()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1
• rtld(GNU_HASH)
• sed
• systemd-udev(x86-64)
• zlib

License

GPLv2

Changelog

* Tue Jan 30 2024 Tao Liu <ltao@redhat.com> - 2.0.27-8
  - dracut-module-setup: Skip initrd-cleanup and initrd-parse-etc in kdump
* Wed Jan 03 2024 Tao Liu <ltao@redhat.com> - 2.0.27-7
  - Explain the auto_reset_crashkernel option in more details
  - Use the same /etc/resolve.conf in kdump initrd if it's managed manually
* Wed Dec 20 2023 Tao Liu <ltao@redhat.com> - 2.0.27-6
  - Use the same /etc/resolve.conf in kdump initrd if it's managed manually
* Fri Nov 24 2023 Tao Liu <ltao@redhat.com> - 2.0.27-5
  - kdumpctl: Only returns immediately after an error occurs in check_*_modified
* Thu Nov 16 2023 Tao Liu <ltao@redhat.com> - 2.0.27-4
  - kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active
  - Allow _crashkernel_add to address larger memory ranges
  - kdump-lib: Harden _crashkernel_add
* Wed Nov 08 2023 Tao Liu <ltao@redhat.com> - 2.0.27-3
  - Rebase makedumpfile to v1.7.4
  - powerpc: update kdumpctl to load kernel signing key for fadump
  - powerpc: update kdumpctl to remove deletion of kernel signing key once loaded
* Mon Nov 06 2023 Tao Liu <ltao@redhat.com> - 2.0.27-2
  - kexec: update manpage with explicit mention of clean kexec
* Tue Sep 26 2023 Tao Liu <ltao@redhat.com> - 2.0.26-9
  - Introduce a function to get reserved memory size
  - powerpc: update fadump sysfs node path
  - kdumpctl: merge check_current_{kdump,fadump}_status
  - kdumpctl: remove unnecessary uses of $?
* Tue Jul 04 2023 Tao Liu <ltao@redhat.com> - 2.0.26-8
  - spec: kdump/ppc64: make servicelog_notify silent when there are no errors
* Wed Jun 21 2023 Tao Liu <ltao@redhat.com> - 2.0.26-7
  - kdumpctl: Fix temporary directory location
  - kdump-lib: Match 64k debug kernel in prepare_kdump_bootinfo()
* Thu Jun 15 2023 Tao Liu <ltao@redhat.com> - 2.0.26-6
  - kdumpctl: Fix the matching of plus symbol by grep's EREs
  - kdump-lib: Evaluate the memory consumption by smmu and mlx5 separately
  - kdump-lib: add support for 64K aarch64
  - kdump-lib: Introduce parse_kver_from_path() to get kernel version from its path name
  - kdump-lib: Introduce a help function _crashkernel_add()
  - Simplify the management of the kernel parameter crashkernel
  - kdump-lib: fix the matching pattern for debug-kernel
  - kdump-lib: always specify version in is_squash_available
* Thu Jun 01 2023 Tao Liu <ltao@redhat.com> - 2.0.26-5
  - Add lvm thin provision to kdump supported-kdump-targets.txt
  - mkdumprd: Use the correct syntax to redirect the stderr to null
* Wed May 31 2023 Tao Liu <ltao@redhat.com> - 2.0.26-4
  - kdumpctl: Add basic UKI support
  - kdumpctl: Move temp file in get_kernel_size to global temp dir
  - kdumpctl: Move get_kernel_size to kdumpctl
  - kdump-lib: fix prepare_cmdline
  - mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
* Tue May 09 2023 Tao Liu <ltao@redhat.com> - 2.0.26-3
  - Rebase makedumpfile to v1.7.3
  - kdumpctl: lower the log level in reset_crashkernel_for_installed_kernel
* Fri Apr 21 2023 Tao Liu <ltao@redhat.com> - 2.0.26-2
  - Rebase makedumpfile to upstream latest(8e8b8814be1)
  - Show how much time kdump has waited for the network to be ready
  - Tell nmcli to not escape colon when getting the path of connection profile
* Fri Apr 07 2023 Tao Liu <ltao@redhat.com> - 2.0.26-1
  - Rebase kexec-tools to v2.0.26
* Tue Mar 21 2023 Tao Liu <ltao@redhat.com> - 2.0.25-14
  - Install nfsv4-related drivers when users specify nfs dumping via dracut_args
  - Revert "ppc64: tackle SRCU hang issue"
  - sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390
* Fri Mar 10 2023 Tao Liu <ltao@redhat.com> - 2.0.25-13
  - kdump-lib: Add the CoreOS kernel dir to the boot_dirlist
  - kdump-lib: attempt to fix BOOT_IMAGE detection
  - kdump-lib: change how ostree based systems are detected
  - kdump-lib: clear up references to Atomic/CoreOS
* Fri Feb 24 2023 Tao Liu <ltao@redhat.com> - 2.0.25-12
  - Reset crashkernel to default value if newly installed kernel has crashkernel=auto
  - Use the correct command to get architecture
* Wed Jan 11 2023 Pingfan Liu <piliu@redhat.com> - 2.0.25-11
  - ppc64: tackle SRCU hang issue
* Tue Dec 27 2022 Pingfan Liu <piliu@redhat.com> - 2.0.25-10
  - Update supported-kdump-targets.txt
  - dracut-module-setup.sh: skip installing driver for the loopback interface
  - Don't try to update crashkernel when bootloader is not installed
  - dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking
  - fadump: use 'zstd' as the default compression method
  - fadump: fix default initrd backup and restore logic
  - fadump: add a kernel install hook to clean up fadump initramfs
  - fadump: avoid status check while starting in fadump mode
  - spec: only install mkfadumprd for ppc
  - fadump: preserve file modification time to help with hardlinking
  - fadump: do not use squash to reduce image size
* Mon Dec 19 2022 Tao Liu <ltao@redhat.com> - 2.0.25-9
  - Add virtiofs to kdump supported-kdump-targets.txt
  - dracut-module-setup.sh: stop overwriting dracut's trap handler
* Wed Dec 07 2022 Tao Liu <ltao@redhat.com> - 2.0.25-8
  - kexec-tools: ppc64: remove rma_top limit
  - kdumpctl: Optimize _find_kernel_path_by_release regex string
  - kdump.conf: use a simple generator script to maintain
* Fri Nov 25 2022 Tao Liu <ltao@redhat.com> - 2.0.25-7
  - Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces
* Thu Nov 24 2022 Tao Liu <ltao@redhat.com> - 2.0.25-6
  - Simplify setup_znet by copying connection profile to initrd
  - Wait for the network to be truly ready before dumping vmcore
  - Address the cases where a NIC has a different name in kdump kernel
  - Reduce kdump memory consumption by only installing needed NIC drivers
  - Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
  - Set up kdump network by directly copying NM connection profile to initrd
  - Stop dracut 35network-manager from running nm-initrd-generator
  - Apply the timeout configuration of nm-initrd-generator
  - Determine whether IPv4 or IPv6 is needed
  - Add functions to copy NetworkManage connection profiles to the initramfs
  - Fix error for vlan over team network interface
* Fri Nov 11 2022 Tao Liu <ltao@redhat.com> - 2.0.25-5
  - Don't check fs modified when dump target is lvm2 thinp
  - Add dependency of dracut lvmthinpool-monitor module
  - lvm.conf should be check modified if lvm2 thinp enabled
  - Add lvm2 thin provision dump target checker
  - Fix the sync issue for dump_fs
* Tue Nov 01 2022 Tao Liu <ltao@redhat.com> - 2.0.25-4
  - Rebase makedumpfile to 1.7.2
  - Include the memory overhead cost of cryptsetup when estimating the memory requirement for LUKS-encrypted target
  - Choosing the most memory-consuming key slot when estimating the memory requirement for LUKS-encrypted target
  - Skip reading /etc/defaut/grub for s390x
  - Only try to reset crashkernel for osbuild during package install
  - Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore
  - use /run/ostree-booted to tell if scriptlet is running on OSTree system
* Wed Oct 26 2022 Tao Liu <ltao@redhat.com> - 2.0.25-3
  - virtiofs support for kexec-tools
  - Seperate dracut and dracut-squash compressor for zstd
* Mon Oct 17 2022 Tao Liu <ltao@redhat.com> - 2.0.25-2
  - mkdumprd: Improve error messages on non-existing NFS target directories
  - fadump: avoid non-debug kernel use for fadump case
* Wed Sep 21 2022 Tao Liu <ltao@redhat.com> - 2.0.25-1
  - Rebase kexec-tools to v2.0.25
  - remind the users to run zipl after calling grubby on s390x
  - remove useless --zipl when calling grubby to update kernel command line
  - skip updating /etc/default/grub for s390x
  - Allow to update kexec-tools using virt-customize for cloud base image
  - kdumpctl: make the kdump.log root-readable-only
* Tue Jul 12 2022 Tao Liu <ltao@redhat.com> - 2.0.24-5
  - kdump-lib: use non-debug kernels first
  - kdump-lib: fix typo in variable name
* Wed Jun 15 2022 Tao Liu <ltao@redhat.com> - 2.0.24-4
  - crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k
  - kdump-lib.sh: Check the output of blkid with sed instead of eval
* Tue Jun 07 2022 Tao Liu <ltao@redhat.com> - 2.0.24-3
  - kdump.sysconfig*: add ignition.firstboot to KDUMP_COMMANDLINE_REMOVE
* Mon May 23 2022 Tao Liu <ltao@redhat.com> - 2.0.24-2
  - remove the upper bound of default crashkernel value example
  - update fadump-howto
  - update kexec-kdump-howto
  - update crashkernel-howto
  - add man documentation for kdumpctl get-default-crashkernel
  - improve get_recommend_size
  - fix a calculation error in get_system_size
* Thu May 05 2022 Tao Liu <ltao@redhat.com> - 2.0.24-1
  - Rebase kexec-tools to v2.0.24
  - Rebase makedumpfile to 1.7.1
  - Avoid false-positive mem_section validation with vmlinux
* Fri Apr 08 2022 Tao Liu <ltao@redhat.com> - 2.0.23-10
  - try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value
  - address the case where there are multiple values for the same kernel arg
  - s390: add support for --reuse-cmdline
  - use slurp_proc_file() in get_command_line()
  - add slurp_proc_file()
  - s390: use KEXEC_ALL_OPTIONS
  - s390: add variable command line size
  - util_lib/elf_info: harden parsing of printk buffer
  - print error when reading with unsupported compression
  - use cycle detection when parsing the prink log_buf
  - use pointer arithmetics for dump_dmesg
  - add generic cycle detection
* Fri Feb 25 2022 Tao Liu <ltao@redhat.com> - 2.0.23-9
  - makedumpfile: sadump, kaslr: fix failure of calculating kaslr_offset
* Mon Feb 21 2022 Tao Liu <ltao@redhat.com> - 2.0.23-8
  - update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools
* Mon Feb 14 2022 Tao Liu <ltao@redhat.com> - 2.0.23-7
  - fix incorrect usage of _get_all_kernels_from_grubby
  - fix the mistake of swapping function parameters of read_proc_environ_var

Files

/etc/kdump
/etc/kdump.conf
/etc/kdump/post.d
/etc/kdump/pre.d
/etc/makedumpfile.conf.sample
/etc/sysconfig/kdump
/usr/bin/kdumpctl
/usr/lib/.build-id
/usr/lib/.build-id/21
/usr/lib/.build-id/21/ea909464986993adbcbcaf783c4eea956b62be
/usr/lib/.build-id/22
/usr/lib/.build-id/22/d9fb75d23f4a689611cb4fad7190df0e46f3fc
/usr/lib/.build-id/98
/usr/lib/.build-id/98/91153f5361b8fbf6c166db2bd7dc348da7d122
/usr/lib/.build-id/a3
/usr/lib/.build-id/a3/e38e0a08accf349e3ee8c1bf70bd84be9938ec
/usr/lib/dracut/modules.d/99earlykdump
/usr/lib/dracut/modules.d/99earlykdump/early-kdump.sh
/usr/lib/dracut/modules.d/99earlykdump/module-setup.sh
/usr/lib/dracut/modules.d/99kdumpbase
/usr/lib/dracut/modules.d/99kdumpbase/kdump-capture.service
/usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.service
/usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.target
/usr/lib/dracut/modules.d/99kdumpbase/kdump.sh
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh
/usr/lib/dracut/modules.d/99kdumpbase/monitor_dd_progress
/usr/lib/kdump
/usr/lib/kdump/kdump-lib-initramfs.sh
/usr/lib/kdump/kdump-lib.sh
/usr/lib/kdump/kdump-logger.sh
/usr/lib/kernel/install.d/60-kdump.install
/usr/lib/kernel/install.d/92-crashkernel.install
/usr/lib/systemd/system-generators/kdump-dep-generator.sh
/usr/lib/systemd/system/kdump.service
/usr/lib/udev/kdump-udev-throttler
/usr/lib/udev/rules.d
/usr/lib/udev/rules.d/98-kexec.rules
/usr/lib64/eppic_makedumpfile.so
/usr/sbin/kexec
/usr/sbin/makedumpfile
/usr/sbin/mkdumprd
/usr/sbin/vmcore-dmesg
/usr/share/doc/kexec-tools
/usr/share/doc/kexec-tools/News
/usr/share/doc/kexec-tools/TODO
/usr/share/doc/kexec-tools/crashkernel-howto.txt
/usr/share/doc/kexec-tools/early-kdump-howto.txt
/usr/share/doc/kexec-tools/fadump-howto.txt
/usr/share/doc/kexec-tools/kdump-in-cluster-environment.txt
/usr/share/doc/kexec-tools/kexec-kdump-howto.txt
/usr/share/doc/kexec-tools/live-image-kdump-howto.txt
/usr/share/doc/kexec-tools/supported-kdump-targets.txt
/usr/share/kdump
/usr/share/licenses/kexec-tools
/usr/share/licenses/kexec-tools/COPYING
/usr/share/makedumpfile
/usr/share/makedumpfile/eppic_scripts
/usr/share/makedumpfile/eppic_scripts/README
/usr/share/makedumpfile/eppic_scripts/ap_messages_3_10_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/dir_names_3_10_to_3_13.c
/usr/share/makedumpfile/eppic_scripts/dir_names_3_14_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/keyring_3_10_to_4_3.c
/usr/share/makedumpfile/eppic_scripts/keyring_4_4_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/proc_names_3_10_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/tcp_sk_buf_3_10_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/udp_sk_buf_3_10_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/unix_sk_buff_3_10_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/vhost_net_buffers_3_10_to_3_18.c
/usr/share/makedumpfile/eppic_scripts/vhost_net_buffers_3_19_to_4_8.c
/usr/share/makedumpfile/eppic_scripts/vhost_scsi_buffers_3_10_to_4_8.c
/usr/share/man/man5/kdump.conf.5.gz
/usr/share/man/man5/makedumpfile.conf.5.gz
/usr/share/man/man8/kdumpctl.8.gz
/usr/share/man/man8/kexec.8.gz
/usr/share/man/man8/makedumpfile.8.gz
/usr/share/man/man8/mkdumprd.8.gz
/usr/share/man/man8/vmcore-dmesg.8.gz
/var/crash
/var/lib/kdump

Generated by rpm2html 1.8.1

Fabrice Bellet, Wed Apr 24 05:07:23 2024