Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

PrusaSlicer-2.4.2-bp155.1.41 RPM for aarch64

From OpenSuSE Leap 15.5 for aarch64

Name: PrusaSlicer Distribution: SUSE Linux Enterprise 15 SP5
Version: 2.4.2 Vendor: openSUSE
Release: bp155.1.41 Build date: Mon May 22 16:37:25 2023
Group: Hardware/Printing Build host: obs-arm-9
Size: 45564424 Source RPM: PrusaSlicer-2.4.2-bp155.1.41.src.rpm
Packager: https://bugs.opensuse.org
Url: https://www.prusa3d.com/prusaslicer/
Summary: G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code
instructions for FFF printers or PNG layers for mSLA 3D printers. It's
compatible with any modern printer based on the RepRap toolchain, including
all those based on the Marlin, Prusa, Sprinter and Repetier firmware.
It also works with Mach3, LinuxCNC and Machinekit controllers.

Provides

Requires

License

AGPL-3.0-only

Changelog

* Mon Sep 05 2022 Hans-Peter Jansen <hpj@urpla.net>
  - Quoting Lucas Matena (see gh#prusa3d/PrusaSlicer#8299, issue 2):
    if you link PrusaSlicer 2.5.x with wxWidgets 3.2, you will most
    likely break it: link against wxWidgets 3.0.5
* Mon Aug 01 2022 Ben Greiner <code@bnavigator.de>
  - Add PrusaSlicer-cereal.patch -- gh#prusa3d/PrusaSlicer#7809
* Tue May 31 2022 Ben Greiner <code@bnavigator.de>
  - Disable test_voronoi -- rh#2059646
* Sun May 08 2022 Ben Greiner <code@bnavigator.de>
  - Update to version 2.4.2
    * SLA mode incorrectly handled 3MFs from 3rd party software,
      resulting in misplaced SLA support points and holes in some
      cases (#6100, #7359, #7189, #7826, #7659). This is very old
      issue.
    * Vase mode preview did not show in cases when Custom Start
      G-Code lacked moves in Z #8032
    * When loading a 3rd party 3MF using drag and drop. PrusaSlicer
      no longer asks if the 3MF shall be loaded as a project (which
      makes no sense since it contains no config) and loads the
      geometry only
    * Using the Layer Height Modifier with the wipe tower was
      impossible with multiple objects. The wipe tower reported that
      the layer height profile is different, even though it was in
      fact set the same on all objects (#7711, #7903, #8044)
    * Fixed a crash on "Convert from/to units" when several objects
      were selected
    * Automatic color change for logo crashed PrusaSlicer in certain
      cases (when a one-layer object was present) #8156
    * Linux specific: Fixed a crash on opening projects in some cases
      (#8078, #8097)
    * Added Snapmaker bundle (Snapmaker A250, Snapmaker A350). Based
      on https://github.com/nivekmai/snapmaker-prusa by @nivekmai,
      @WilliamBosacker, @mrworf
    * Added profiles for Zonestar printers (Z5, Z6, Z5X, Z8, Z9),
      based on slic3r/slic3r-profiles#19 by @ZONESTAR3D
    * Fixed a crash when Unsaved Changes dialog attempted to show a
      modified config option which is not available in current mode
      (e.g. Start G-Code in Simple mode). #7905
    * Fixed a bug that when the user was closing the application and
      replied 'Yes' in the dialog asking about unsaved project while
      also checking 'Remember my choice', it made it impossible to
      close PrusaSlicer in the next runs when there were no objects
      in the plater #8076, #8122
    * Loading of a G-Code in G-Code Viewer or loading config from
      G-Code file sometimes failed because of a bug in parsing of the
      configuration block at the end.
    * Fixed incorrect rendering of some characters used in the
      recently updated Simplified Chinese translation #8171
    * Fixed incorrect number of toolchanges reported in "Sliced Info"
      box when wipe tower was used. The annotations of toolchanges in
      G-Code were also numbered wrong #8186
    * Fixed a crash when using the "Import SL1 Archive" function and
      either cancelling the dialog or confirming a non-existing file
      [#8175]
    * Recycling symbols in Shape Gallery were mirrored so the user
      does not have to flip them when using them as negative volumes
      at the base of the print (which is the usual use case). Also,
      PLA recycling symbol was added #7800
* Mon Apr 25 2022 Ben Greiner <code@bnavigator.de>
  - Refresh PrusaSlicer-boost1.79.patch with upstream's fix
    * gh#prusa3d/PrusaSlicer#8238
* Sun Apr 24 2022 Ben Greiner <code@bnavigator.de>
  - Add PrusaSlicer-boost1.79.patch avoiding the deprecation
    of boost::filesystem::ofstream in Boost 1.79
    * gh#prusa3d/PrusaSlicer#8238
* Tue Apr 12 2022 Hans-Peter Jansen <hpj@urpla.net>
  - Use gcc version 10 for anything but Tumbleweed
* Tue Apr 12 2022 Adrian Schröter <adrian@suse.de>
  - Use gcc version 10
    This allows the build on Leap 15.3/15.4 and in Factory using the same
    compiler.
  - Add buildignore to libglfw3-wayland to fix building for 15.3
* Fri Mar 18 2022 Ben Greiner <code@bnavigator.de>
  - Update to 2.4.1
    * Big changelog since v2.4.0, most changes decribed in alpha and
      beta release notes:
      https://github.com/prusa3d/PrusaSlicer/releases
    * introducing G-Code Substitutions
    * fixing bugs found in 2.4.0 release
* Fri Dec 24 2021 Ben Greiner <code@bnavigator.de>
  - Update to 2.4.0
    * Big changelog since v2.3.3, most changes decribed in alpha and
      beta release notes:
      https://github.com/prusa3d/PrusaSlicer/releases
    * Send system info: new dialog for telemetry. Opt-in.
  - Drop patches
    * PrusaSlicer-catch2upd.patch
    * PrusaSlicer-issue6681-openvdb.patch
    * PrusaSlicer-pr6590-updateTBB.patch
* Tue Nov 23 2021 Ben Greiner <code@bnavigator.de>
  - Make compatible with TBB 2021
    * add FindTBB.cmake -- gh#prusa3d/PrusaSlicer#7332
    * add PrusaSlicer-pr6590-updateTBB.patch
      gh#prusa3d/PrusaSlicer#6590
* Fri Sep 24 2021 Ben Greiner <code@bnavigator.de>
  - Add PrusaSlicer-catch2upd.patch
    * gh#prusa3d/PrusaSlicer#6518
    * Update of Catch2 test framework from v2.13.3 to v2.13.6
    * Fixes build failure due to change of MINSIGSTKSZ in glibc 2.34
* Mon Aug 30 2021 Ben Greiner <code@bnavigator.de>
  - Add PrusaSlicer-issue6681-openvdb.patch
    * gh#prusa3d/PrusaSlicer#6681
    * ilmbase-devel is now provided by openexr-devel
    * OpenVDB's FindOpenVDB.cmake requires blosc-devel
* Fri Jul 16 2021 Ben Greiner <code@bnavigator.de>
  - Update to v2.3.3
    * fix a bug in handling FDM multi-material project and
      configuration files.
* Fri Jul 09 2021 Ben Greiner <code@bnavigator.de>
  - Update to v2.3.2
    * Introducing support for the new Prusa SL1S SPEED masked
      SLA printer, Prusa CW1S firmware updater, PrusaLink
      host type for Prusa i3 MK3 printers, Monotonic infill
      for all solid layers, better support for reading
      configurations of newer PrusaSlicer releases, new 3rd
      party printer profiles and a handful of bug fixes.
  - Switch to bundled GLEW -- gh#prusa3d/PrusaSlicer#6396
* Tue Apr 20 2021 Ben Greiner <code@bnavigator.de>
  - Update to v2.3.1
    New 3rd party printer profiles
    * Multiple Creality printers profiles were added (Ender-3 Max,
      Ender-4, Ender-6, CR-5 Pro, CR-5 Pro H, CR-6 SE, CR-6 Max,
      CR-10 Max, CR-200B, CR-8), thanks @pmjdebruijn.
    * Added Artillery printer profiles (Sidewinder X1, Genius),
      thanks @SzabolcsHornyak.
    * Added INAT printer profiles, thanks @MarkINAT.
    * Updated Anycubic Kossel bed texture (thanks @brunosso) and
      Anycubic Kossel bed STL.
    Vulnerability issues fixed
    * The Talos Cisco Intelligence Group did a great job identifying
      potential security issues in loading invalid and potentially
      malicious AMF and 3MF files, see their vulnerability reports
      TALOS-2020-1222 and TALOS-2020-1218. We fixed these two
      potential security issues with this release of PrusaSlicer.
    Bugs fixed with respect to PrusaSlicer 2.3.0
    * Reduced number of hits shown by the "Find config option"
      dialog, fixed case insensitive search for non-Latin1 languages
      [#5202].
    * Fixed G-code preview with coloring by a tool and visualization
      of travels enabled #6095.
    * Fixed opening of drop down menus at the bottom of the screen
      on multi-monitor setups #2999 #5911 #5957. This issue has been
      fixed by us in wxWidgets and accepted by the upstream.
* Mon Jan 11 2021 Benjamin Greiner <code@bnavigator.de>
  - Update to v2.3.0
    * Introducing paint-on supports, ironing, monotonic
      infill, seam painting, adaptive and support cubic
      infill, print time per feature analysis, standalone
      G-code viewer application, better auto-arrange with a
      customizable gap and rotation, search function for the
      settings, reworked "Avoid crossing perimeters" function,
      physical printers (network settings), many new 3rd party
      printer profiles and much, much more.
  - Full Changelog entries for betas and release candidates:
    https://github.com/prusa3d/PrusaSlicer/releases
  - Drop PrusaSlicer-pr4340-boost-1-73.patch merged upstream
* Sun Dec 20 2020 Benjamin Greiner <code@bnavigator.de>
  - Remove extra PrusaSlicer.desktop. Use upstream's desktop files.
    Graphics;3DGraphics seems to be the consensus now.
  - Remove wrapper gh#prusa3d/PrusaSlicer#4691
* Tue Sep 01 2020 Benjamin Greiner <code@bnavigator.de>
  - support boost >= 1.73
    * PrusaSlicer-pr4340-boost-1-73.patch gh#prusa3d/PrusaSlicer#4340
    * fixes gh#prusa3d/PrusaSlicer#4264
* Tue Sep 01 2020 Benjamin Greiner <code@bnavigator.de>
  - enforce GDK_BACKEND=x11 by indroducing the same wrapper as Fedora
    gh#prusa3d/PrusaSlicer#4691
* Thu Aug 20 2020 Benjamin Greiner <code@bnavigator.de>
  - revert the memoryperjob change. The build process really acquires
    that much memory per job and the workers cannot provide 3GB per
    CPU core. Sadly, we are limited by memory not by CPU cores.
  - require 11 GB of RAM. This allows us to run 3 jobs in parallel and
    can be provided by all architectures
* Thu Aug 20 2020 Martin Liška <mliska@suse.cz>
  - Use memoryperjob constraint instead of %limit_build macro.
  - Use only 1GB for memoryperjob.
* Mon Aug 10 2020 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Use wxGTK3 instead of wxWidgets (GTK2), for better HiDPI and
    Wayland support.
* Tue Jun 16 2020 Benjamin Greiner <code@bnavigator.de>
  - This is mainly a cosmetic update so that the package gets rebuilt
    in Factory. Rebuild is needed because of wxWidgets - boo#1172750
  - Add openvdb-tools package for better cmake reporting.
  - Make the 32-bit floating point workaround more readable.
    gh#prusa3d/PrusaSlicer#3781
* Fri Apr 24 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - BuildRequire pkgconfig(libudev) instead of libudev-devel: allow
    OBS to shortcut through -mini flavors.
* Sat Mar 21 2020 Benjamin Greiner <code@bnavigator.de>
  - update to version 2.2.0
    introducing SLA hollowing and hole drilling, support for 3rd party
    printer vendors, 3Dconnexion support, automatic variable layer height,
    macOS dark mode support, greatly improved ColorPrint feature and much,
    much more.
    See https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.2.0
    and the changelogs for the release candidates, betas and alphas since
    2.1.1 for a complete list of changes.
  - reactivate parallel builds, but need strong enough workers and reserve
    4G of memory per thread (memory-constraints, %limit_build)
  - new build dependencies: cgal, ilmbase, more of boost, libudev, openvdb
* Wed Dec 11 2019 Benjamin Greiner <code@bnavigator.de>
  - update to version 2.1.1
    - integrating the Prusa Mini printer into the
      installation wizard
    - 3D scene thumbnails are newly generated and exported
      into the G-code to be displayed on the Prusa Mini
      printer's display
  - use Graphics;3DGraphics for non Tumbleweed distros
* Fri Sep 13 2019 Benjamin Greiner <code@bnavigator.de>
  - final 2.1.0
  - symlink icon files instead of duplicate copy
* Sat Sep 07 2019 Benjamin Greiner <code@bnavigator.de>
  - new version 2.1.0-rc
  - remove obsolete patch file
  - tag localization files
  - remove stray Noto font file, add as dependency
  - outsource Desktop file creation
  - move Desktop category to "Science;Construction"
* Mon Jul 29 2019 Benjamin Greiner <code@bnavigator.de>
  - Clean up specfile according to declined submit request 718985
    - Remove non-devel BuildRequires
    - Move icons to icons/hicolor
  - build with -j1 as otherwise x64 build is stuck
* Fri Jul 26 2019 Benjamin Greiner <code@bnavigator.de>
  - use new patch from upstream
    (see https://github.com/prusa3d/PrusaSlicer/pull/2676)
  - use Education;Construction as long as boo#1074711 is not resolved
* Tue Jul 23 2019 Benjamin Greiner <code@bnavigator.de>
  - initial specfile

Files

/usr/bin/prusa-gcodeviewer
/usr/bin/prusa-slicer
/usr/share/PrusaSlicer
/usr/share/PrusaSlicer/data
/usr/share/PrusaSlicer/data/hints.ini
/usr/share/PrusaSlicer/icons
/usr/share/PrusaSlicer/icons/Pmetal_001.png
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer-mac_128px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer.ico
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer.svg
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer_128px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer_192px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer-gcodeviewer_32px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer-mac_128px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer.icns
/usr/share/PrusaSlicer/icons/PrusaSlicer.ico
/usr/share/PrusaSlicer/icons/PrusaSlicer.png
/usr/share/PrusaSlicer/icons/PrusaSlicer.svg
/usr/share/PrusaSlicer/icons/PrusaSlicer_128px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer_192px.png
/usr/share/PrusaSlicer/icons/PrusaSlicer_192px_grayscale.png
/usr/share/PrusaSlicer/icons/PrusaSlicer_192px_transparent.png
/usr/share/PrusaSlicer/icons/PrusaSlicer_32px.png
/usr/share/PrusaSlicer/icons/add.svg
/usr/share/PrusaSlicer/icons/add_copies.svg
/usr/share/PrusaSlicer/icons/add_gcode.svg
/usr/share/PrusaSlicer/icons/add_modifier.svg
/usr/share/PrusaSlicer/icons/add_negative.svg
/usr/share/PrusaSlicer/icons/add_part.svg
/usr/share/PrusaSlicer/icons/advanced_plus.svg
/usr/share/PrusaSlicer/icons/arrange.svg
/usr/share/PrusaSlicer/icons/attention.svg
/usr/share/PrusaSlicer/icons/browse.svg
/usr/share/PrusaSlicer/icons/bullet_black.png
/usr/share/PrusaSlicer/icons/bullet_blue.png
/usr/share/PrusaSlicer/icons/bullet_white.png
/usr/share/PrusaSlicer/icons/cancel.svg
/usr/share/PrusaSlicer/icons/change_extruder.svg
/usr/share/PrusaSlicer/icons/cog.svg
/usr/share/PrusaSlicer/icons/cog_.svg
/usr/share/PrusaSlicer/icons/cog_go.png
/usr/share/PrusaSlicer/icons/collapse.svg
/usr/share/PrusaSlicer/icons/colorchange_add.svg
/usr/share/PrusaSlicer/icons/colorchange_add_f.svg
/usr/share/PrusaSlicer/icons/colorchange_add_m.svg
/usr/share/PrusaSlicer/icons/colorchange_del.svg
/usr/share/PrusaSlicer/icons/colorchange_del_f.svg
/usr/share/PrusaSlicer/icons/compare.svg
/usr/share/PrusaSlicer/icons/cooling.svg
/usr/share/PrusaSlicer/icons/copy.svg
/usr/share/PrusaSlicer/icons/copy_menu.svg
/usr/share/PrusaSlicer/icons/cross.svg
/usr/share/PrusaSlicer/icons/cross_focus.svg
/usr/share/PrusaSlicer/icons/cross_focus_large.svg
/usr/share/PrusaSlicer/icons/cut.svg
/usr/share/PrusaSlicer/icons/delete.svg
/usr/share/PrusaSlicer/icons/delete_all.svg
/usr/share/PrusaSlicer/icons/delete_all_menu.svg
/usr/share/PrusaSlicer/icons/dot.svg
/usr/share/PrusaSlicer/icons/dot_small.svg
/usr/share/PrusaSlicer/icons/dot_white.svg
/usr/share/PrusaSlicer/icons/drop_to_bed.svg
/usr/share/PrusaSlicer/icons/edit_button.svg
/usr/share/PrusaSlicer/icons/edit_gcode.svg
/usr/share/PrusaSlicer/icons/edit_gcode_f.svg
/usr/share/PrusaSlicer/icons/edit_layers_all.svg
/usr/share/PrusaSlicer/icons/edit_layers_some.svg
/usr/share/PrusaSlicer/icons/edit_uni.svg
/usr/share/PrusaSlicer/icons/editor.svg
/usr/share/PrusaSlicer/icons/editor_menu.svg
/usr/share/PrusaSlicer/icons/eject_sd.svg
/usr/share/PrusaSlicer/icons/empty.svg
/usr/share/PrusaSlicer/icons/equal.svg
/usr/share/PrusaSlicer/icons/error_tick.svg
/usr/share/PrusaSlicer/icons/error_tick_f.svg
/usr/share/PrusaSlicer/icons/exclamation.svg
/usr/share/PrusaSlicer/icons/exclamation_manifold.svg
/usr/share/PrusaSlicer/icons/exit.svg
/usr/share/PrusaSlicer/icons/export_config.svg
/usr/share/PrusaSlicer/icons/export_config_bundle.svg
/usr/share/PrusaSlicer/icons/export_gcode.svg
/usr/share/PrusaSlicer/icons/export_plater.svg
/usr/share/PrusaSlicer/icons/export_to_sd.svg
/usr/share/PrusaSlicer/icons/eye_closed.svg
/usr/share/PrusaSlicer/icons/eye_open.svg
/usr/share/PrusaSlicer/icons/fdm_supports.svg
/usr/share/PrusaSlicer/icons/fdm_supports_.svg
/usr/share/PrusaSlicer/icons/flag_green.svg
/usr/share/PrusaSlicer/icons/flag_red.svg
/usr/share/PrusaSlicer/icons/funnel.svg
/usr/share/PrusaSlicer/icons/fuzzy_skin.svg
/usr/share/PrusaSlicer/icons/gcode.icns
/usr/share/PrusaSlicer/icons/hollow.svg
/usr/share/PrusaSlicer/icons/hollowing.svg
/usr/share/PrusaSlicer/icons/import_config.svg
/usr/share/PrusaSlicer/icons/import_config_bundle.svg
/usr/share/PrusaSlicer/icons/import_plater.svg
/usr/share/PrusaSlicer/icons/infill.svg
/usr/share/PrusaSlicer/icons/info.svg
/usr/share/PrusaSlicer/icons/instance_add.svg
/usr/share/PrusaSlicer/icons/instance_remove.svg
/usr/share/PrusaSlicer/icons/ironing.svg
/usr/share/PrusaSlicer/icons/layers.svg
/usr/share/PrusaSlicer/icons/layers_white.svg
/usr/share/PrusaSlicer/icons/lock.svg
/usr/share/PrusaSlicer/icons/lock_closed.svg
/usr/share/PrusaSlicer/icons/lock_closed_f.svg
/usr/share/PrusaSlicer/icons/lock_closed_white.svg
/usr/share/PrusaSlicer/icons/lock_open.svg
/usr/share/PrusaSlicer/icons/lock_open_f.svg
/usr/share/PrusaSlicer/icons/lock_open_sys.svg
/usr/share/PrusaSlicer/icons/mark_X.svg
/usr/share/PrusaSlicer/icons/mark_Y.svg
/usr/share/PrusaSlicer/icons/mark_Z.svg
/usr/share/PrusaSlicer/icons/mirroring_off.svg
/usr/share/PrusaSlicer/icons/mirroring_on.svg
/usr/share/PrusaSlicer/icons/mirroring_transparent.svg
/usr/share/PrusaSlicer/icons/mmu_segmentation.svg
/usr/share/PrusaSlicer/icons/mmu_segmentation_.svg
/usr/share/PrusaSlicer/icons/mode_advanced.svg
/usr/share/PrusaSlicer/icons/mode_expert.svg
/usr/share/PrusaSlicer/icons/mode_simple.svg
/usr/share/PrusaSlicer/icons/move.svg
/usr/share/PrusaSlicer/icons/not_equal.svg
/usr/share/PrusaSlicer/icons/note.svg
/usr/share/PrusaSlicer/icons/notification_cancel.svg
/usr/share/PrusaSlicer/icons/notification_cancel_hover.svg
/usr/share/PrusaSlicer/icons/notification_clippy.svg
/usr/share/PrusaSlicer/icons/notification_close.svg
/usr/share/PrusaSlicer/icons/notification_close_hover.svg
/usr/share/PrusaSlicer/icons/notification_documentation.svg
/usr/share/PrusaSlicer/icons/notification_documentation_hover.svg
/usr/share/PrusaSlicer/icons/notification_eject_sd.svg
/usr/share/PrusaSlicer/icons/notification_eject_sd_hover.svg
/usr/share/PrusaSlicer/icons/notification_error.svg
/usr/share/PrusaSlicer/icons/notification_info.svg
/usr/share/PrusaSlicer/icons/notification_minimalize.svg
/usr/share/PrusaSlicer/icons/notification_minimalize_hover.svg
/usr/share/PrusaSlicer/icons/notification_preferences.svg
/usr/share/PrusaSlicer/icons/notification_preferences_hover.svg
/usr/share/PrusaSlicer/icons/notification_right.svg
/usr/share/PrusaSlicer/icons/notification_right_hover.svg
/usr/share/PrusaSlicer/icons/notification_warning.svg
/usr/share/PrusaSlicer/icons/number_of_copies.svg
/usr/share/PrusaSlicer/icons/objlist_info.svg
/usr/share/PrusaSlicer/icons/open.svg
/usr/share/PrusaSlicer/icons/output+page_white.svg
/usr/share/PrusaSlicer/icons/pad.svg
/usr/share/PrusaSlicer/icons/paste.svg
/usr/share/PrusaSlicer/icons/paste_menu.svg
/usr/share/PrusaSlicer/icons/pause_print.svg
/usr/share/PrusaSlicer/icons/pause_print_f.svg
/usr/share/PrusaSlicer/icons/place.svg
/usr/share/PrusaSlicer/icons/plater.svg
/usr/share/PrusaSlicer/icons/preview.svg
/usr/share/PrusaSlicer/icons/preview_menu.svg
/usr/share/PrusaSlicer/icons/printer.svg
/usr/share/PrusaSlicer/icons/printer_placeholder.png
/usr/share/PrusaSlicer/icons/printer_white.svg
/usr/share/PrusaSlicer/icons/question.svg
/usr/share/PrusaSlicer/icons/re_slice.svg
/usr/share/PrusaSlicer/icons/redo.svg
/usr/share/PrusaSlicer/icons/redo_menu.svg
/usr/share/PrusaSlicer/icons/redo_toolbar.svg
/usr/share/PrusaSlicer/icons/remove.svg
/usr/share/PrusaSlicer/icons/remove_copies.svg
/usr/share/PrusaSlicer/icons/remove_menu.svg
/usr/share/PrusaSlicer/icons/resin.svg
/usr/share/PrusaSlicer/icons/revert_all_.svg
/usr/share/PrusaSlicer/icons/rotate.svg
/usr/share/PrusaSlicer/icons/save.svg
/usr/share/PrusaSlicer/icons/scale.svg
/usr/share/PrusaSlicer/icons/seam.svg
/usr/share/PrusaSlicer/icons/seam_.svg
/usr/share/PrusaSlicer/icons/search.svg
/usr/share/PrusaSlicer/icons/search_.svg
/usr/share/PrusaSlicer/icons/search_blink.svg
/usr/share/PrusaSlicer/icons/search_gray.svg
/usr/share/PrusaSlicer/icons/set_separate_obj.svg
/usr/share/PrusaSlicer/icons/settings.svg
/usr/share/PrusaSlicer/icons/shape_gallery.svg
/usr/share/PrusaSlicer/icons/sinking.svg
/usr/share/PrusaSlicer/icons/skirt+brim.svg
/usr/share/PrusaSlicer/icons/sla_printer.svg
/usr/share/PrusaSlicer/icons/sla_supports.svg
/usr/share/PrusaSlicer/icons/splashscreen-gcodepreview.jpg
/usr/share/PrusaSlicer/icons/splashscreen.jpg
/usr/share/PrusaSlicer/icons/split_object_SMALL.svg
/usr/share/PrusaSlicer/icons/split_objects.svg
/usr/share/PrusaSlicer/icons/split_parts.svg
/usr/share/PrusaSlicer/icons/split_parts_SMALL.svg
/usr/share/PrusaSlicer/icons/spool.svg
/usr/share/PrusaSlicer/icons/stl.icns
/usr/share/PrusaSlicer/icons/support.svg
/usr/share/PrusaSlicer/icons/support_blocker.svg
/usr/share/PrusaSlicer/icons/support_enforcer.svg
/usr/share/PrusaSlicer/icons/switch_presets.svg
/usr/share/PrusaSlicer/icons/test.svg
/usr/share/PrusaSlicer/icons/thumb_down.svg
/usr/share/PrusaSlicer/icons/thumb_left.svg
/usr/share/PrusaSlicer/icons/thumb_right.svg
/usr/share/PrusaSlicer/icons/thumb_up.svg
/usr/share/PrusaSlicer/icons/tick_mark.svg
/usr/share/PrusaSlicer/icons/time.svg
/usr/share/PrusaSlicer/icons/timer_dot.svg
/usr/share/PrusaSlicer/icons/timer_dot_empty.svg
/usr/share/PrusaSlicer/icons/toolbar_arrow.svg
/usr/share/PrusaSlicer/icons/toolbar_background.png
/usr/share/PrusaSlicer/icons/undo.svg
/usr/share/PrusaSlicer/icons/undo_menu.svg
/usr/share/PrusaSlicer/icons/undo_toolbar.svg
/usr/share/PrusaSlicer/icons/upload_queue.svg
/usr/share/PrusaSlicer/icons/wrench.svg
/usr/share/PrusaSlicer/icons/wrench_white.svg
/usr/share/PrusaSlicer/localization
/usr/share/PrusaSlicer/localization/ca
/usr/share/PrusaSlicer/localization/ca/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/cs
/usr/share/PrusaSlicer/localization/cs/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/de
/usr/share/PrusaSlicer/localization/de/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/en
/usr/share/PrusaSlicer/localization/en/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/es
/usr/share/PrusaSlicer/localization/es/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/fr
/usr/share/PrusaSlicer/localization/fr/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/hu
/usr/share/PrusaSlicer/localization/hu/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/it
/usr/share/PrusaSlicer/localization/it/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/ja
/usr/share/PrusaSlicer/localization/ja/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/ko
/usr/share/PrusaSlicer/localization/ko/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/ko_KR
/usr/share/PrusaSlicer/localization/ko_KR/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/ko_KR/PrusaSlicer_ko_KR.mo
/usr/share/PrusaSlicer/localization/nl
/usr/share/PrusaSlicer/localization/nl/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/pl
/usr/share/PrusaSlicer/localization/pl/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/pt_BR
/usr/share/PrusaSlicer/localization/pt_BR/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/ru
/usr/share/PrusaSlicer/localization/ru/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/tr
/usr/share/PrusaSlicer/localization/tr/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/uk
/usr/share/PrusaSlicer/localization/uk/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/wx_locale
/usr/share/PrusaSlicer/localization/wx_locale/en.mo
/usr/share/PrusaSlicer/localization/zh_CN
/usr/share/PrusaSlicer/localization/zh_CN/PrusaSlicer.mo
/usr/share/PrusaSlicer/localization/zh_TW
/usr/share/PrusaSlicer/localization/zh_TW/PrusaSlicer.mo
/usr/share/PrusaSlicer/profiles
/usr/share/PrusaSlicer/profiles/Anycubic
/usr/share/PrusaSlicer/profiles/Anycubic.idx
/usr/share/PrusaSlicer/profiles/Anycubic.ini
/usr/share/PrusaSlicer/profiles/Anycubic/4MAXPRO20_bed.stl
/usr/share/PrusaSlicer/profiles/Anycubic/4MAXPRO20_texture.svg
/usr/share/PrusaSlicer/profiles/Anycubic/4MAXPRO20_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/AK.png
/usr/share/PrusaSlicer/profiles/Anycubic/AK.svg
/usr/share/PrusaSlicer/profiles/Anycubic/AKLP_Bed.stl
/usr/share/PrusaSlicer/profiles/Anycubic/AKLP_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/AK_Bed.stl
/usr/share/PrusaSlicer/profiles/Anycubic/AK_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/I3MEGAS_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/I3MEGA_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/MEGA0_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/PREDATOR_thumbnail.png
/usr/share/PrusaSlicer/profiles/Anycubic/i3megas.svg
/usr/share/PrusaSlicer/profiles/Anycubic/i3megas_bed.stl
/usr/share/PrusaSlicer/profiles/Anycubic/mega0.svg
/usr/share/PrusaSlicer/profiles/Anycubic/mega0_bed.stl
/usr/share/PrusaSlicer/profiles/Artillery
/usr/share/PrusaSlicer/profiles/Artillery.idx
/usr/share/PrusaSlicer/profiles/Artillery.ini
/usr/share/PrusaSlicer/profiles/Artillery/Genius_thumbnail.png
/usr/share/PrusaSlicer/profiles/Artillery/Hornet_thumbnail.png
/usr/share/PrusaSlicer/profiles/Artillery/X1_thumbnail.png
/usr/share/PrusaSlicer/profiles/Artillery/bed-genius.png
/usr/share/PrusaSlicer/profiles/Artillery/bed-genius.stl
/usr/share/PrusaSlicer/profiles/Artillery/bed-hornet.png
/usr/share/PrusaSlicer/profiles/Artillery/bed-hornet.stl
/usr/share/PrusaSlicer/profiles/Artillery/bed-x1.png
/usr/share/PrusaSlicer/profiles/Artillery/bed-x1.stl
/usr/share/PrusaSlicer/profiles/BIBO
/usr/share/PrusaSlicer/profiles/BIBO.idx
/usr/share/PrusaSlicer/profiles/BIBO.ini
/usr/share/PrusaSlicer/profiles/BIBO/BIBO2.svg
/usr/share/PrusaSlicer/profiles/BIBO/BIBO2_bed.stl
/usr/share/PrusaSlicer/profiles/BIBO/BIBO2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality
/usr/share/PrusaSlicer/profiles/Creality.idx
/usr/share/PrusaSlicer/profiles/Creality.ini
/usr/share/PrusaSlicer/profiles/Creality/CR10MAX_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10MINI_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10S4_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10S5_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10SMART_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10SPROV2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10SPRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10S_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10V2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10V3_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR10_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR200B_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR20PRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR20_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR5PROH_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR5PRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR6MAX_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR6SE_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CR8_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CRXPRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/CRX_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER2PRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3BLTOUCH_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3MAX_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3PRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3S1_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3V2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER3_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER4_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER5PLUS_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER5_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER6_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/ENDER7_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/SERMOOND1_thumbnail.png
/usr/share/PrusaSlicer/profiles/Creality/cr10.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr10max.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10max_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr10mini.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10mini_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr10s4.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10s4_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr10s5.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10s5_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr10spro.svg
/usr/share/PrusaSlicer/profiles/Creality/cr10v2_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr20.svg
/usr/share/PrusaSlicer/profiles/Creality/cr200b.svg
/usr/share/PrusaSlicer/profiles/Creality/cr200b_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr5pro.svg
/usr/share/PrusaSlicer/profiles/Creality/cr5pro_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr6se.svg
/usr/share/PrusaSlicer/profiles/Creality/cr6se_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/cr8.svg
/usr/share/PrusaSlicer/profiles/Creality/cr8_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender2.svg
/usr/share/PrusaSlicer/profiles/Creality/ender2_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender2pro.svg
/usr/share/PrusaSlicer/profiles/Creality/ender2pro_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender3.svg
/usr/share/PrusaSlicer/profiles/Creality/ender3_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender3v2.svg
/usr/share/PrusaSlicer/profiles/Creality/ender3v2_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender5plus.svg
/usr/share/PrusaSlicer/profiles/Creality/ender5plus_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender6.svg
/usr/share/PrusaSlicer/profiles/Creality/ender6_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/ender7.svg
/usr/share/PrusaSlicer/profiles/Creality/ender7_bed.stl
/usr/share/PrusaSlicer/profiles/Creality/sermoond1.svg
/usr/share/PrusaSlicer/profiles/Creality/sermoond1_bed.stl
/usr/share/PrusaSlicer/profiles/FLSun
/usr/share/PrusaSlicer/profiles/FLSun.idx
/usr/share/PrusaSlicer/profiles/FLSun.ini
/usr/share/PrusaSlicer/profiles/FLSun/Q5.svg
/usr/share/PrusaSlicer/profiles/FLSun/Q5_bed.stl
/usr/share/PrusaSlicer/profiles/FLSun/Q5_thumbnail.png
/usr/share/PrusaSlicer/profiles/FLSun/QQSP.svg
/usr/share/PrusaSlicer/profiles/FLSun/QQSP_bed.stl
/usr/share/PrusaSlicer/profiles/FLSun/QQSP_thumbnail.png
/usr/share/PrusaSlicer/profiles/INAT
/usr/share/PrusaSlicer/profiles/INAT.idx
/usr/share/PrusaSlicer/profiles/INAT.ini
/usr/share/PrusaSlicer/profiles/INAT/PROTON_X_RAIL_thumbnail.png
/usr/share/PrusaSlicer/profiles/INAT/PROTON_X_ROD_thumbnail.png
/usr/share/PrusaSlicer/profiles/Jubilee
/usr/share/PrusaSlicer/profiles/Jubilee.idx
/usr/share/PrusaSlicer/profiles/Jubilee.ini
/usr/share/PrusaSlicer/profiles/Jubilee/Jubilee_bed.stl
/usr/share/PrusaSlicer/profiles/Jubilee/Jubilee_texture.svg
/usr/share/PrusaSlicer/profiles/Jubilee/Jubilee_thumbnail.png
/usr/share/PrusaSlicer/profiles/LulzBot
/usr/share/PrusaSlicer/profiles/LulzBot.idx
/usr/share/PrusaSlicer/profiles/LulzBot.ini
/usr/share/PrusaSlicer/profiles/LulzBot/MINI_AERO_thumbnail.png
/usr/share/PrusaSlicer/profiles/LulzBot/TAZ6_AERO_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch
/usr/share/PrusaSlicer/profiles/PrusaResearch.idx
/usr/share/PrusaSlicer/profiles/PrusaResearch.ini
/usr/share/PrusaSlicer/profiles/PrusaResearch/MINI_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2.5MMU2_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2.5SMMU2S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2.5S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2.5_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2SMM_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK2S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK3MMU2_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK3SMMU2S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK3S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/MK3_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/SL1S_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/SL1_thumbnail.png
/usr/share/PrusaSlicer/profiles/PrusaResearch/mini.svg
/usr/share/PrusaSlicer/profiles/PrusaResearch/mini_bed.stl
/usr/share/PrusaSlicer/profiles/PrusaResearch/mk2.svg
/usr/share/PrusaSlicer/profiles/PrusaResearch/mk2_bed.stl
/usr/share/PrusaSlicer/profiles/PrusaResearch/mk3.svg
/usr/share/PrusaSlicer/profiles/PrusaResearch/mk3_bed.stl
/usr/share/PrusaSlicer/profiles/PrusaResearch/sl1.svg
/usr/share/PrusaSlicer/profiles/PrusaResearch/sl1_bed.stl
/usr/share/PrusaSlicer/profiles/PrusaResearch/sl1s.svg
/usr/share/PrusaSlicer/profiles/PrusaResearch/sl1s_bed.stl
/usr/share/PrusaSlicer/profiles/RatRig
/usr/share/PrusaSlicer/profiles/RatRig.idx
/usr/share/PrusaSlicer/profiles/RatRig.ini
/usr/share/PrusaSlicer/profiles/RatRig/VC3_300_thumbnail.png
/usr/share/PrusaSlicer/profiles/RatRig/VC3_400_thumbnail.png
/usr/share/PrusaSlicer/profiles/RatRig/VC3_500_thumbnail.png
/usr/share/PrusaSlicer/profiles/RatRig/VMINION_thumbnail.png
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-300.stl
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-300.svg
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-400.stl
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-400.svg
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-500.stl
/usr/share/PrusaSlicer/profiles/RatRig/rr-vc-500.svg
/usr/share/PrusaSlicer/profiles/RatRig/rr-vminion.stl
/usr/share/PrusaSlicer/profiles/RatRig/rr-vminion.svg
/usr/share/PrusaSlicer/profiles/Snapmaker
/usr/share/PrusaSlicer/profiles/Snapmaker.idx
/usr/share/PrusaSlicer/profiles/Snapmaker.ini
/usr/share/PrusaSlicer/profiles/Snapmaker/A250_bed.stl
/usr/share/PrusaSlicer/profiles/Snapmaker/A250_texture.svg
/usr/share/PrusaSlicer/profiles/Snapmaker/A250_thumbnail.png
/usr/share/PrusaSlicer/profiles/Snapmaker/A350_bed.stl
/usr/share/PrusaSlicer/profiles/Snapmaker/A350_texture.svg
/usr/share/PrusaSlicer/profiles/Snapmaker/A350_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB
/usr/share/PrusaSlicer/profiles/TriLAB.idx
/usr/share/PrusaSlicer/profiles/TriLAB.ini
/usr/share/PrusaSlicer/profiles/TriLAB/AQI_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2+FP2_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2+FP_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2P+FP2_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2P+FP_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2P_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQ2_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQL_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQM_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/DQXL_thumbnail.png
/usr/share/PrusaSlicer/profiles/TriLAB/aq_bed.stl
/usr/share/PrusaSlicer/profiles/TriLAB/aqp_bed.stl
/usr/share/PrusaSlicer/profiles/TriLAB/dq2_bed.stl
/usr/share/PrusaSlicer/profiles/Ultimaker
/usr/share/PrusaSlicer/profiles/Ultimaker.idx
/usr/share/PrusaSlicer/profiles/Ultimaker.ini
/usr/share/PrusaSlicer/profiles/Ultimaker/ULTIMAKER2_thumbnail.png
/usr/share/PrusaSlicer/profiles/Ultimaker/ultimaker2.svg
/usr/share/PrusaSlicer/profiles/Ultimaker/ultimaker2_bed.stl
/usr/share/PrusaSlicer/profiles/Voron
/usr/share/PrusaSlicer/profiles/Voron.idx
/usr/share/PrusaSlicer/profiles/Voron.ini
/usr/share/PrusaSlicer/profiles/Voron/Voron_v0_120_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v1_250_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v1_300_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v1_350_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_250_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_250_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_300_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_300_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_350_afterburner_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/Voron_v2_350_thumbnail.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v0-120.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v1-250.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v1-300.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v2-250.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v2-300.png
/usr/share/PrusaSlicer/profiles/Voron/bedtexture-v2-350.png
/usr/share/PrusaSlicer/profiles/Voron/printbed-v0-120.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v1-250.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v1-300.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v1-350.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v2-250.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v2-300.stl
/usr/share/PrusaSlicer/profiles/Voron/printbed-v2-350.stl
/usr/share/PrusaSlicer/profiles/Zonestar
/usr/share/PrusaSlicer/profiles/Zonestar.idx
/usr/share/PrusaSlicer/profiles/Zonestar.ini
/usr/share/PrusaSlicer/profiles/Zonestar/150_texture.svg
/usr/share/PrusaSlicer/profiles/Zonestar/220_texture.svg
/usr/share/PrusaSlicer/profiles/Zonestar/310_texture.svg
/usr/share/PrusaSlicer/profiles/Zonestar/Z5X_thumbnail.png
/usr/share/PrusaSlicer/profiles/Zonestar/Z5_thumbnail.png
/usr/share/PrusaSlicer/profiles/Zonestar/Z6_thumbnail.png
/usr/share/PrusaSlicer/profiles/Zonestar/Z8_thumbnail.png
/usr/share/PrusaSlicer/profiles/Zonestar/Z9_thumbnail.png
/usr/share/PrusaSlicer/profiles/Zonestar/bed_150.stl
/usr/share/PrusaSlicer/profiles/Zonestar/bed_220.stl
/usr/share/PrusaSlicer/profiles/Zonestar/bed_310.stl
/usr/share/PrusaSlicer/profiles/gCreate
/usr/share/PrusaSlicer/profiles/gCreate.idx
/usr/share/PrusaSlicer/profiles/gCreate.ini
/usr/share/PrusaSlicer/profiles/gCreate/GMAX15P_thumbnail.png
/usr/share/PrusaSlicer/profiles/gCreate/GMAX2DUAL2IN1_thumbnail.png
/usr/share/PrusaSlicer/profiles/gCreate/GMAX2DUAL_thumbnail.png
/usr/share/PrusaSlicer/profiles/gCreate/GMAX2PRO_thumbnail.png
/usr/share/PrusaSlicer/profiles/gCreate/GMAX2_thumbnail.png
/usr/share/PrusaSlicer/profiles/gCreate/gmax15p.svg
/usr/share/PrusaSlicer/profiles/gCreate/gmax15p_bed.stl
/usr/share/PrusaSlicer/profiles/gCreate/gmax2.svg
/usr/share/PrusaSlicer/profiles/gCreate/gmax2_bed.stl
/usr/share/PrusaSlicer/shaders
/usr/share/PrusaSlicer/shaders/gouraud.fs
/usr/share/PrusaSlicer/shaders/gouraud.vs
/usr/share/PrusaSlicer/shaders/gouraud_light.fs
/usr/share/PrusaSlicer/shaders/gouraud_light.vs
/usr/share/PrusaSlicer/shaders/gouraud_light_instanced.fs
/usr/share/PrusaSlicer/shaders/gouraud_light_instanced.vs
/usr/share/PrusaSlicer/shaders/mm_contour.fs
/usr/share/PrusaSlicer/shaders/mm_contour.vs
/usr/share/PrusaSlicer/shaders/mm_gouraud.fs
/usr/share/PrusaSlicer/shaders/mm_gouraud.vs
/usr/share/PrusaSlicer/shaders/options_110.fs
/usr/share/PrusaSlicer/shaders/options_110.vs
/usr/share/PrusaSlicer/shaders/options_120.fs
/usr/share/PrusaSlicer/shaders/options_120.vs
/usr/share/PrusaSlicer/shaders/printbed.fs
/usr/share/PrusaSlicer/shaders/printbed.vs
/usr/share/PrusaSlicer/shaders/toolpaths_lines.fs
/usr/share/PrusaSlicer/shaders/toolpaths_lines.vs
/usr/share/PrusaSlicer/shaders/variable_layer_height.fs
/usr/share/PrusaSlicer/shaders/variable_layer_height.vs
/usr/share/PrusaSlicer/shapes
/usr/share/PrusaSlicer/shapes/M3_hex_nut.png
/usr/share/PrusaSlicer/shapes/M3_hex_nut.stl
/usr/share/PrusaSlicer/shapes/M3x10_screw.png
/usr/share/PrusaSlicer/shapes/M3x10_screw.stl
/usr/share/PrusaSlicer/shapes/OTHER_recycling_symbol.png
/usr/share/PrusaSlicer/shapes/OTHER_recycling_symbol.stl
/usr/share/PrusaSlicer/shapes/PETG_recycling_symbol.png
/usr/share/PrusaSlicer/shapes/PETG_recycling_symbol.stl
/usr/share/PrusaSlicer/shapes/PLA_recycling_symbol.png
/usr/share/PrusaSlicer/shapes/PLA_recycling_symbol.stl
/usr/share/PrusaSlicer/shapes/box.png
/usr/share/PrusaSlicer/shapes/box.stl
/usr/share/PrusaSlicer/shapes/bunny.png
/usr/share/PrusaSlicer/shapes/bunny.stl
/usr/share/PrusaSlicer/shapes/cone.png
/usr/share/PrusaSlicer/shapes/cone.stl
/usr/share/PrusaSlicer/shapes/cylinder.png
/usr/share/PrusaSlicer/shapes/cylinder.stl
/usr/share/PrusaSlicer/shapes/helper_disk.png
/usr/share/PrusaSlicer/shapes/helper_disk.stl
/usr/share/PrusaSlicer/shapes/pyramid.png
/usr/share/PrusaSlicer/shapes/pyramid.stl
/usr/share/PrusaSlicer/shapes/sphere.png
/usr/share/PrusaSlicer/shapes/sphere.stl
/usr/share/PrusaSlicer/shapes/torus.png
/usr/share/PrusaSlicer/shapes/torus.stl
/usr/share/applications/PrusaGcodeviewer.desktop
/usr/share/applications/PrusaSlicer.desktop
/usr/share/doc/packages/PrusaSlicer
/usr/share/doc/packages/PrusaSlicer/README.md
/usr/share/doc/packages/PrusaSlicer/doc
/usr/share/doc/packages/PrusaSlicer/doc/Dependencies.md
/usr/share/doc/packages/PrusaSlicer/doc/How to build - Linux et al.md
/usr/share/doc/packages/PrusaSlicer/doc/How to build - Mac OS.md
/usr/share/doc/packages/PrusaSlicer/doc/How to build - Windows.md
/usr/share/doc/packages/PrusaSlicer/doc/Localization_guide.md
/usr/share/doc/packages/PrusaSlicer/doc/images
/usr/share/doc/packages/PrusaSlicer/doc/images/long_text_on_button.png
/usr/share/doc/packages/PrusaSlicer/doc/updating
/usr/share/doc/packages/PrusaSlicer/doc/updating/Updating.md
/usr/share/doc/packages/PrusaSlicer/doc/updating/setting_mod.png
/usr/share/doc/packages/PrusaSlicer/doc/updating/setting_sys.png
/usr/share/doc/packages/PrusaSlicer/doc/updating/setting_user.png
/usr/share/doc/packages/PrusaSlicer/doc/updating/snapshots_dialog.png
/usr/share/icons/hicolor/128x128/apps/PrusaSlicer-gcodeviewer.png
/usr/share/icons/hicolor/128x128/apps/PrusaSlicer.png
/usr/share/icons/hicolor/192x192/apps/PrusaSlicer-gcodeviewer.png
/usr/share/icons/hicolor/192x192/apps/PrusaSlicer.png
/usr/share/icons/hicolor/32x32/apps/PrusaSlicer-gcodeviewer.png
/usr/share/icons/hicolor/32x32/apps/PrusaSlicer.png
/usr/share/licenses/PrusaSlicer
/usr/share/licenses/PrusaSlicer/LICENSE


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 18:17:49 2024