Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

kexec-tools-2.0.28-6.fc41 RPM for ppc64le

From Fedora Rawhide for ppc64le / k

Name: kexec-tools Distribution: Fedora Project
Version: 2.0.28 Vendor: Fedora Project
Release: 6.fc41 Build date: Sat Mar 16 03:31:02 2024
Group: Unspecified Build host: buildvm-ppc64le-03.iad2.fedoraproject.org
Size: 743252 Source RPM: kexec-tools-2.0.28-6.fc41.src.rpm
Packager: Fedora Project
Summary: The kexec/kdump userspace component
 
kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.

Provides

Requires

License

GPL-2.0-only

Changelog

* Sat Mar 16 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-6
  - let kexec-tools depends on makedumpfile
* Fri Feb 23 2024 Carl George <carlwgeorge@fedoraproject.org> - 2.0.28-5
  - Add a makedumpfile subpackage
* Fri Feb 02 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-4
  - kexec: don't use kexec_file_load on XEN
  - Fix building on x86_64 with binutils 2.41
* Wed Jan 24 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-3
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-2
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Wed Jan 17 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-1
  - kexec-tools 2.0.28 (Simon Horman)
  - Use the same /etc/resolve.conf in kdump initrd if it's managed manually
  - dracut-module-setup: consolidate s390 network device config
* Mon Dec 11 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-5
  - Let %post scriptlet always exits with the zero exit status
* Wed Nov 08 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-4
  - update to makedumpfile-1.7.4
  - kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active
  - Allow _crashkernel_add to address larger memory ranges
* Tue Oct 17 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-3
  - Only try to reset crashkernel when kdump.service is enabled
* Fri Oct 13 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-2
  - update to latest upstream kexec-tools
* Tue Oct 10 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-1
  - kexec-tools 2.0.27 (Simon Horman)
* Thu Aug 31 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-1
  - kexec-tools 2.0.27 (Simon Horman)
* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.26-8
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Wed Jun 14 2023 Coiby <coxu@redhat.com> - 2.0.26-7
  - kdumpctl: Fix the matching of plus symbol by grep's EREs
  - kdump-lib: Evaluate the memory consumption by smmu and mlx5 separately
  - kdump-lib: add support for 64K aarch64
  - kdump-lib: Introduce parse_kver_from_path() to get kernel version from its path name
  - kdump-lib: Introduce a help function _crashkernel_add()
* Fri Jun 02 2023 Timothée Ravier <tim@siosm.fr> - 2.0.26-6
  - Make binutils a recommend as it's only needed for UKI support
* Mon May 29 2023 Coiby <coxu@redhat.com> - 2.0.26-5
  - Simplify the management of the kernel parameter crashkernel
  - Let _update_kernel_cmdline return the correct return code
  - mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
  - kdump-lib: fix the matching pattern for debug-kernel
* Tue May 16 2023 Coiby <coxu@redhat.com> - 2.0.26-4
  - kdumpctl: Add support for systemd-boot paths
  - mkdumprd: add --aggressive-strip as default dracut args
  - kdumpctl: Add basic UKI support
  - kdumpctl: Move temp file in get_kernel_size to global temp dir
  - kdumpctl: Move get_kernel_size to kdumpctl
  - kdumpctl: fix is_dracut_mod_omitted
  - kdump-lib: move is_dracut_mod_omitted to kdumpctl
  - kdump-lib: remove get_nmcli_connection_apath_by_ifname
  - kdump-lib: remove get_nmcli_field_by_conpath
  - dracut-module-setup: remove dead source_ifcfg_file
  - kdump-lib-initramfs: remove is_fs_dump_target
  - kdump-lib-initramfs: harden is_mounted
  - Show how much time kdump has waited for the network to be ready
  - Tell nmcli to not escape colon when getting the path of connection profile
  - kdumpctl: lower the log level in reset_crashkernel_for_installed_kernel
  - Install nfsv4-related drivers when users specify nfs dumping via dracut_args
  - sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390
  - Use the correct command to get architecture
* Mon Jan 30 2023 Coiby <coxu@redhat.com> - 2.0.26-3
  - kdumpctl: make do_estimate more robust
  - kdumpctl: refractor check_rebuild
  - kdumpctl: cleanup 'stop'
  - kdumpctl: cleanup 'start'
  - kdump-lib: fix prepare_cmdline
  - kdumpctl: move aws workaround to kdump-lib
  - unit tests: add tests for prepare_cmdline
  - kdump-lib: always specify version in is_squash_available
  - mkfadumprd: drop unset globals from debug output
  - kdumpctl: merge check_current_{kdump,fadump}_status
  - dracut-early-kdump: explicitly use bash
  - dracut-early-kdump: fix shellcheck findings
  - kdumpctl: simplify check_failure_action_config
  - makedumpfile: Fix wrong exclusion of slab pages on Linux 6.2-rc1
* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.26-2
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Thu Dec 22 2022 Coiby <coxu@redhat.com> - 2.0.26-1
  - Update kexec-tools to 2.0.25
  - Don't try to update crashkernel when bootloader is not installed
  - dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking
  - dracut-module-setup.sh: skip installing driver for the loopback interface
* Wed Dec 07 2022 Coiby <coxu@redhat.com> - 2.0.25-4
  - dracut-module-setup.sh: stop overwriting dracut's trap handler
  - fadump: avoid status check while starting in fadump mode
  - fadump: add a kernel install hook to clean up fadump initramfs
  - fadump: fix default initrd backup and restore logic
  - fadump: use 'zstd' as the default compression method
* Fri Nov 25 2022 Coiby <coxu@redhat.com> - 2.0.25-3
  - kdumpctl: Optimize _find_kernel_path_by_release regex string
  - unit tests: adapt check_config to gen-kdump-conf.sh
  - kdump.conf: use a simple generator script to maintain
  - Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces
  - Simplify setup_znet by copying connection profile to initrd
  - Wait for the network to be truly ready before dumping vmcore
  - Address the cases where a NIC has a different name in kdump kernel
  - Reduce kdump memory consumption by only installing needed NIC drivers
  - Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
  - Set up kdump network by directly copying NM connection profile to initrd
  - Stop dracut 35network-manager from running nm-initrd-generator
  - Apply the timeout configuration of nm-initrd-generator
  - Determine whether IPv4 or IPv6 is needed
  - Add functions to copy NetworkManage connection profiles to the initramfs
  - Fix error for vlan over team network interface
  - Skip reset_crashkernel_after_update during package install
  - Don't check fs modified when dump target is lvm2 thinp
  - tests: use .nmconnection to set up test network
  - fadump: preserve file modification time to help with hardlinking
  - fadump: do not use squash to reduce image size
  - selftest: Add lvm2 thin provision for kdump test
  - selftest: Only iterate the .sh files for test execution
  - Add dependency of dracut lvmthinpool-monitor module
  - lvm.conf should be check modified if lvm2 thinp enabled
  - Add lvm2 thin provision dump target checker
* Thu Oct 27 2022 Coiby <coxu@redhat.com> - 2.0.25-2
  - Update makedumpfile to 1.7.2
  - Skip reading /etc/defaut/grub for s390x
  - Include the memory overhead cost of cryptsetup when estimating the memory requirement for LUKS-encrypted target
  - Choosing the most memory-consuming key slot when estimating the memory requirement for LUKS-encrypted target
  - Fix grep warnings "grep: warning: stray \ before -"
  - Only try to reset crashkernel for osbuild during package install
  - Prefix reset-crashkernel-{for-installed_kernel,after-update} with underscore
  - Seperate dracut and dracut-squash compressor for zstd
  - Fix the sync issue for dump_fs
  - virtiofs support for kexec-tools
  - fadump: avoid non-debug kernel use for fadump case
  - mkdumprd: Improve error messages on non-existing NFS target directories
  - kdumpctl: make the kdump.log root-readable-only
  - sysconfig: use a simple generator script to maintain
* Wed Aug 03 2022 Coiby <coxu@redhat.com> - 2.0.25-1
  - Update kexec-tools to 2.0.25
  - remind the users to run zipl after calling grubby on s390x
  - remove useless --zipl when calling grubby to update kernel command line
  - skip updating /etc/default/grub for s390x
  - use /run/ostree-booted to tell if scriptlet is running on OSTree system
  - Allow to update kexec-tools using virt-customize for cloud base image
  - KDUMP_COMMANDLINE: remove irqpoll parameter on aws aarch64 platform
* Thu Jul 21 2022 Coiby <coxu@redhat.com> - 2.0.24-4
  - Checking the existence of 40-redhat.rules before modifying
  - kdump-lib: Add the CoreOS kernel dir to the boot_dirlist
  - kdump-lib: attempt to fix BOOT_IMAGE detection
  - kdump-lib: change how ostree based systems are detected
  - kdump-lib: clear up references to Atomic/CoreOS
  - crashkernel: optimize arm64 reserved size if PAGE_SIZE=4k
  - kdump-lib: use non-debug kernels first
* Mon May 23 2022 Coiby <coxu@redhat.com> - 2.0.24-3
  - Update makedumpfile to 1.7.1
  - unit tests: add tests for get_system_size and get_recommend_size
  - improve get_recommend_size
  - fix a calculation error in get_system_size
  - logger: save log after all kdump progress finished
* Sun Apr 24 2022 Coiby <coxu@redhat.com> - 2.0.24-2
  - remove the upper bound of default crashkernel value example
  - update fadump-howto
  - update kexec-kdump-howto
  - update crashkernel-howto
  - add man documentation for kdumpctl get-default-crashkernel
  - unit tests: add check_config with with the default kdump.conf
  - unit tests: add tests for kdump_get_conf_val in kdump-lib-initramfs.sh
  - unit tests: add tests for "kdumpctl reset-crashkernel"
  - unit tests: add tests for _{update,read}_kernel_arg_in_grub_etc_default in kdumpctl
  - unit tests: add tests for kdumpctl read_proc_environ_var and _is_osbuild
  - unit tests: add tests for get_dump_mode_by_fadump_val
  - unit tests: add tests for get_grub_kernel_boot_parameter
  - unit tests: prepare for kdumpctl and kdump-lib.sh to be unit-tested
* Mon Apr 11 2022 Coiby <coxu@redhat.com> - 2.0.24-1
  - Update kexec-tools to 2.0.24
  - kdumpctl: remove kdump_get_conf_val in save_raw
  - kdumpctl: drop DUMP_TARGET variable
  - kdumpctl: drop SSH_KEY_LOCATION variable
  - kdumpctl: drop SAVE_PATH variable
  - kdumpctl: reduce file operations on kdump.conf
  - kdumpctl: merge check_ssh_config into check_config
  - kdumpctl: simplify propagate_ssh_key
  - kdumpctl: forbid aliases from ssh config
  - kdumpctl: fix comment in check_and_wait_network_ready
  - kdump-lib-initramfs: merge definitions for default ssh key
  - kdumpctl: remove unnecessary uses of $?
  - kdump-lib: fix typo in variable name
  - kdump-capture.service: switch to journal for stdout
  - kdumpctl/estimate: Fix unnecessary warning
  - kdumpctl: sync the $TARGET_INITRD after rebuild
  - try to update the crashkernel in GRUB_ETC_DEFAULT after kexec-tools updates the default crashkernel value
  - address the case where there are multiple values for the same kernel arg
  - update kernel crashkernel in posttrans RPM scriptlet when updating kexec-tools
  - kdump-lib.sh: Check the output of blkid with sed instead of eval

Files

/etc/kdump
/etc/kdump.conf
/etc/kdump/post.d
/etc/kdump/pre.d
/etc/sysconfig/kdump
/usr/bin/kdumpctl
/usr/lib/.build-id
/usr/lib/.build-id/c1
/usr/lib/.build-id/c1/c4480c49512414c56a4921c1b05934aa617077
/usr/lib/.build-id/d6
/usr/lib/.build-id/d6/0d3ad482673f0d43948d925014faddd90e2d72
/usr/lib/dracut/modules.d/99earlykdump
/usr/lib/dracut/modules.d/99earlykdump/early-kdump.sh
/usr/lib/dracut/modules.d/99earlykdump/module-setup.sh
/usr/lib/dracut/modules.d/99kdumpbase
/usr/lib/dracut/modules.d/99kdumpbase/kdump-capture.service
/usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.service
/usr/lib/dracut/modules.d/99kdumpbase/kdump-emergency.target
/usr/lib/dracut/modules.d/99kdumpbase/kdump.sh
/usr/lib/dracut/modules.d/99kdumpbase/module-setup.sh
/usr/lib/dracut/modules.d/99kdumpbase/monitor_dd_progress
/usr/lib/dracut/modules.d/99zz-fadumpinit
/usr/lib/dracut/modules.d/99zz-fadumpinit/init-fadump.sh
/usr/lib/dracut/modules.d/99zz-fadumpinit/module-setup.sh
/usr/lib/kdump
/usr/lib/kdump/kdump-lib-initramfs.sh
/usr/lib/kdump/kdump-lib.sh
/usr/lib/kdump/kdump-logger.sh
/usr/lib/kdump/kdump-migrate-action.sh
/usr/lib/kdump/kdump-restart.sh
/usr/lib/kernel/install.d/60-fadump.install
/usr/lib/kernel/install.d/60-kdump.install
/usr/lib/kernel/install.d/92-crashkernel.install
/usr/lib/systemd/system-generators/kdump-dep-generator.sh
/usr/lib/systemd/system/kdump.service
/usr/lib/udev/kdump-udev-throttler
/usr/lib/udev/rules.d
/usr/lib/udev/rules.d/98-kexec.rules
/usr/sbin/kexec
/usr/sbin/mkdumprd
/usr/sbin/mkfadumprd
/usr/sbin/vmcore-dmesg
/usr/share/doc/kexec-tools
/usr/share/doc/kexec-tools/News
/usr/share/doc/kexec-tools/TODO
/usr/share/doc/kexec-tools/crashkernel-howto.txt
/usr/share/doc/kexec-tools/early-kdump-howto.txt
/usr/share/doc/kexec-tools/fadump-howto.txt
/usr/share/doc/kexec-tools/kdump-in-cluster-environment.txt
/usr/share/doc/kexec-tools/kexec-kdump-howto.txt
/usr/share/doc/kexec-tools/live-image-kdump-howto.txt
/usr/share/kdump
/usr/share/licenses/kexec-tools
/usr/share/licenses/kexec-tools/COPYING
/usr/share/man/man5/kdump.conf.5.gz
/usr/share/man/man8/kdumpctl.8.gz
/usr/share/man/man8/kexec.8.gz
/usr/share/man/man8/mkdumprd.8.gz
/usr/share/man/man8/vmcore-dmesg.8.gz
/var/crash
/var/lib/kdump

Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Apr 8 01:32:51 2024