Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

yast2-network-4.2.102-lp152.2.41.1 RPM for noarch

From OpenSuSE Ports Leap 15.2 updates for noarch

Name: yast2-network Distribution: openSUSE Leap 15.2
Version: 4.2.102 Vendor: openSUSE
Release: lp152.2.41.1 Build date: Thu Jul 22 12:12:18 2021
Group: System/YaST Build host: obs-arm-10
Size: 1047874 Source RPM: yast2-network-4.2.102-lp152.2.41.1.src.rpm
Packager: http://bugs.opensuse.org
Url: https://github.com/yast/yast-network
Summary: YaST2 - Network Configuration
This package contains the YaST2 component for network configuration.

Provides

Requires

License

GPL-2.0-only

Changelog

* Wed Jun 16 2021 Knut Anderssen <kanderssen@suse.com>
  - Support 'boot' and 'on' as aliases for the 'auto' startmode
    (bsc#1186910)
  - 4.2.102
* Tue Jun 15 2021 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Fix the Comment entry in the desktop file so the tooltip
    in the control center is properly translated (bsc#1187270).
  - 4.2.101
* Mon May 24 2021 Knut Anderssen <kanderssen@suse.com>
  - Fix error when determining the removed interfaces in order to
    remove their associated routes too (bsc#1186082)
  - 4.2.100
* Wed May 12 2021 Knut Anderssen <kanderssen@suse.com>
  - Write IP addresses in order preventing an alias to set the
    primary IP address (bsc#1185967)
  - 4.2.99
* Fri Apr 16 2021 Knut Anderssen <kanderssen@suse.com>
  - Do not crash during an AutoYaST installation when trying to
    update the /etc/hosts using a connection without an IP address
    defined (bsc#1184883)
  - 4.2.98
* Wed Mar 17 2021 Knut Anderssen <kanderssen@suse.com>
  - Always provide the layer2 argument when activating a qeth device
    (bsc#1183639).
  - 4.2.97
* Thu Mar 04 2021 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Do not consider proposing 'nfsroot' as startmode when running on
    installation (bsc#1182818).
  - 4.2.96
* Wed Mar 03 2021 Knut Anderssen <kanderssen@suse.com>
  - Do not filter ethernet cards when configuring a bond in s390
    (bsc#1182911).
  - Only propose a 1492 MTU size when configuring an LCS interface.
  - 4.2.95
* Wed Mar 03 2021 Michal Filka <mfilka@suse.com>
  - bnc#1178260
    - fixed writing a record into /etc/hosts for static ips during
      AY installation
  - 4.2.94
* Tue Mar 02 2021 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Support both 'bridge_forwarddelay' and 'bridge_forward_delay'.
    The latter takes precedence (bsc#1180944).
  - 4.2.93
* Fri Feb 26 2021 Knut Anderssen <kanderssen@suse.com>
  - Fixes some usability issues (bsc#1177834, bsc#1182781):
    - Disable "Edit" and "Delete" buttons when no interfaces
      are detected.
    - Disable the "Scan Network" button when the interface does not
      exist.
  - 4.2.92
* Tue Feb 16 2021 Knut Anderssen <kanderssen@suse.com>
  - Improve the AutoYaST interfaces reader handling better the IP
    Addresses configuration. (bsc#1174353, bsc#1178107)
  - 4.2.91
* Fri Jan 22 2021 Knut Anderssen <kanderssen@suse.com>
  - Suggest to modify the VLAN interface name when the VLAN ID is
    modified (bsc#1174363)
  - 4.2.90
* Mon Jan 11 2021 Knut Anderssen <kanderssen@suse.com>
  - Fix network configuration progress bar steps (bsc#1180702)
  - 4.2.89
* Tue Dec 15 2020 Knut Anderssen <kanderssen@suse.com>
  - Fix prefix length assignation when the alias netmask uses
    dot notation (bsc#1174766).
  - 4.2.88
* Thu Dec 10 2020 Knut Anderssen <kanderssen@suse.com>
  - Fix bonding slaves sorting (bsc#1178950)
  - 4.2.87
* Wed Dec 09 2020 Knut Anderssen <kanderssen@suse.com>
  - Clean the ifcfg file cached data before the connection
    configuration changes are written (bsc#1178950)
  - 4.2.86
* Mon Nov 23 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not show a warn message when modifying a bonding configuration
    and all the slaves are already configured with BOOTPROTO='none'
    (bsc#1178950)
  - 4.2.85
* Fri Nov 20 2020 Knut Anderssen <kanderssen@suse.com>
  - Fixed detection of connection configuration changes (bsc#1178950)
  - 4.2.84
* Tue Oct 13 2020 Michal Filka <mfilka@suse.com>
  - bnc#1175360
    - more robust AY profile parser. Do not crash with internal error
      on unknown node in interfaces section
    - support for static configurations without ip address
  - bnc#1175206
    - support for defined default when missing bootproto in AY
  - 4.2.83
* Wed Oct 07 2020 Knut Anderssen <kanderssen@suse.com>
  - Write hostname changes when modified through the 'dns' client
    (bsc#1177191).
  - 4.2.82
* Mon Oct 05 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not crash when there are more than one parsing hostnames
    obtained by wicked through DHCP (bsc#1173915)
  - 4.2.81
* Mon Sep 28 2020 Knut Anderssen <kanderssen@suse.com>
  - Write the virtualization network configuration properly during an
    autoinstallation (bsc#1177025)
  - 4.2.80
* Thu Sep 24 2020 Knut Anderssen <kanderssen@suse.com>
  - Fixed initialization of the bridge STP configuration
    (bsc#1176820)
  - 4.2.79
* Mon Sep 21 2020 Knut Anderssen <kanderssen@suse.com>
  - Fix connection hostname initialization (bsc#1175579)
  - 4.2.78
* Tue Sep 15 2020 Knut Anderssen <kanderssen@suse.com>
  - Infer the vlan_id from the interface file name when the attribute
    is not declared explicitly (bsc#1176575)
  - 4.2.77
* Thu Sep 10 2020 Knut Anderssen <kanderssen@suse.com>
  - When proposing the virtualization network configuration, force a
    read of the current configuration in case that it is not present
    (bsc#1176313)
  - 4.2.76
* Tue Jul 28 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not crash when configuring an IPv6 route through AutoYaST
    (bsc#1174353)
  - 4.2.75
* Thu Jul 16 2020 Knut Anderssen <kanderssen@suse.com>
  - Permit to write networking config changes without touching the
    service and other components like the firewall (bsc#1173298)
  - 4.2.74
* Tue Jul 14 2020 Knut Anderssen <kanderssen@suse.com>
  - Permit dot characters in the hostname allowing to specify it as
    a FQDN (bsc#1173298)
  - 4.2.73
* Tue Jun 30 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not remove automatically aliases from /etc/hosts during an
    autoinstallation (bsc#1173213)
  - 4.2.72
* Fri Jun 19 2020 Knut Anderssen <kanderssen@suse.com>
  - Parse correctly udev rules keys using underscores (bsc#1167256)
  - 4.2.71
* Mon Jun 15 2020 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Do not export interfaces <aliases> section when there are no
    aliases to export (bsc#1172922).
  - 4.2.70
* Thu Jun 11 2020 Knut Anderssen <kanderssen@suse.com>
  - Try to install the wireless-tools package when the package is
    not installed and the wifi networks are scanned (bsc#1168479)
  - 4.2.69
* Wed Jun 10 2020 José Iván López González <jlopez@suse.com>
  - Avoid error when accessing to Bond Slaves in s390 (bsc#1172444).
  - 4.2.68
* Mon Jun 08 2020 Knut Anderssen <kanderssen@suse.com>
  - AutoYaST: Udev rules are written or copied to the target system
    properly when defined in the profile (bsc#1169663).
  - AutoYaST: Fixed the copy or merge of the linuxrc interfaces
    configuration when the installation network configuration is
    selected to be kept.
  - 4.2.67
* Thu Apr 16 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not try to install kernel packages anymore since ISDN support
    was already dropped which was the most common use case. Removed
    also hardware methods used mainly for ISDN config. (bsc#1151187)
  - 4.2.66
* Thu Apr 02 2020 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - AutoYaST: Do not try to activate network devices that are already
    active in S390 systems (bsc#1163149). Related to jsc#SLE-7396.
  - AutoYaST: Allow to use spaces or colons to separate channel IDs
    in the "chanids" element.
  - 4.2.65
* Fri Mar 27 2020 Knut Anderssen <kanderssen@suse.com>
  - Refresh the current system cached network configuration with the
    one written avoiding inconsistencies during installation
    (bsc#1162987)
  - 4.2.64
* Thu Mar 19 2020 Knut Anderssen <kanderssen@suse.com>
  - AutoYaST: do not crash when defined dns section whitout hostname
    (bsc#1166953)
  - AutoYaST: handle the dhcp_hostname option in the dns section
    correctly
  - 4.2.63
* Wed Mar 18 2020 Knut Anderssen <kanderssen@suse.com>
  - Do a reload of configured interfaces when writing the
    configuration during a ssh or vnc installation (bsc#1166287)
  - 4.2.62
* Tue Mar 10 2020 Josef Reidinger <jreidinger@suse.com>
  - Store ip forwarding set during installation to target system
    (bsc#1159295)
  - 4.2.61
* Mon Mar 02 2020 Michal Filka <mfilka@suse.com>
  - bsc#1164506
    - fixed setting hostname in installer
  - bsc#1164587
    - fixed setting hostname according to AY profile
  - 4.2.60
* Mon Mar 02 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not modify interface name when enslaving it (bsc#1165463)
  - 4.2.59
* Thu Feb 27 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not crash when running the network configuration client if
    the config has not been read by a previous client (bsc#1101514)
  - 4.2.58
* Tue Feb 25 2020 schubi@suse.de
  - Using SysctlConfig class: Handle sysctl entries in different
    directories (bsc#1151649).
  - 4.2.57
* Fri Feb 21 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not crash when checking if a given 'host' is local or not
    (bsc#1163305)
  - 4.2.56
* Wed Feb 19 2020 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Add a class to represent NTP servers (jsc#SLE-7188).
  - 4.2.55
* Wed Feb 19 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not crash with an exception when editing the hardware
    configuration of a new unplugged connection (bsc#1162679)
* Fri Feb 07 2020 Michal Filka <mfilka@suse.com>
  - bsc#1162271
    - fixed validation of hostname
  - 4.2.54
* Fri Feb 07 2020 Knut Anderssen <kanderssen@suse.com>
  - Fix the installation proposal text reflecting the network
    configuration changes (bsc#1162796)
  - 4.2.53
* Thu Feb 06 2020 Knut Anderssen <kanderssen@suse.com>
  - Prevent assignation of values not defined in the AutoYaST profile
    when reading the interfaces section (bsc#1162671)
  - 4.2.52
* Tue Feb 04 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not break when reading interface config files with trailing
    spaces (bsc#1161300)
  - 4.2.51
* Mon Feb 03 2020 Knut Anderssen <kanderssen@suse.com>
  - Fix connection configuration summary when using a remote
    IP address (bsc#1162483)
  - 4.2.50
* Fri Jan 31 2020 Knut Anderssen <kanderssen@suse.com>
  - Do not fail when listing the s390 group devices of a given type
    and no one is present (bsc#1160997)
  - 4.2.49
* Thu Jan 30 2020 Knut Anderssen <kanderssen@suse.com>
  - Bring back the s390 group device activation dialog when editing
    an offline s390 group device (bsc#1160997)
  - 4.2.48
* Thu Jan 23 2020 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Do not try to read an ifcfg-* file that does not exist
    (bsc#1161234).
* Wed Jan 22 2020 Ancor Gonzalez Sosa <ancor@suse.com>
  - Do not crash if install.inf contains an IP address that cannot
    be resolved to a name (bsc#1161217)
  - 4.2.47
* Tue Jan 21 2020 Knut Anderssen <kanderssen@suse.com>
  - bsc#1156986
    - Fix crash when logging that an interface is not connected or
      is not bridgeable when proposing the virtualization config.
  - 4.2.46
* Wed Jan 15 2020 Knut Anderssen <kanderssen@suse.com>
  - bsc#1158025
    - When touching existent udev rules, modify only the parts that
      are relevant or have changed.
    - When the hardware is read, use the parent_bus_id as the busid
      for virtio netcards.
  - 4.2.45
* Wed Jan 15 2020 Knut Anderssen <kanderssen@suse.com>
  - bsc#1156106
    - Fixed the initialization of DNS.dhcp_hostname by the
      inst_setup_dhcp client
  - 4.2.44
* Mon Jan 06 2020 Martin Vidner <mvidner@suse.com>
  - Add a sanity test for CLI error code reporting (bsc#1144351)
  - 4.2.43
* Fri Jan 03 2020 Michal Filka <mfilka@suse.com>
  - bnc#1159970
    - suppport for reading / writing MTU
  - 4.2.42
* Thu Jan 02 2020 Michal Filka <mfilka@suse.com>
  - bnc#1153198, fate#319639
    - fixed internal error caused by incompatibility between new and
      old DNS / Hostname handling code.
  - 4.2.41
* Fri Dec 27 2019 Josef Reidinger <jreidinger@suse.com>
  - read properly old wireless auth modes and use new ones instead
    (bsc#1159160)
  - 4.2.40
* Mon Dec 23 2019 Michal Filka <mfilka@suse.com>
  - bnc#1153198, fate#319639
    - improved previous fix - exception handling
  - 4.2.39
* Tue Dec 17 2019 Knut Andersse <kanderssen@suse.com>
  - bsc#1156986
    - Fixed the creation of network configuration for virtualization
  - 4.2.38
* Tue Dec 17 2019 Michal Filka <mfilka@suse.com>
  - bnc#1153198, fate#319639
    improved previous fix together with some cleanup
  - 4.2.37
* Mon Dec 16 2019 Knut Anderssen <kanderssen@suse.com>
  - Centered and added title to the add interface dialog
    (jsc#SLE-7753)
  - 4.2.36
* Wed Dec 04 2019 Michal Filka <mfilka@suse.com>
  - bnc#1158122
    - fixed internal error when incorrectly querying for hostname in
      AY's second stage
  - 4.2.35
* Tue Nov 26 2019 Knut Anderssen <kanderssen@suse.com>
  - Drop support for obsolete network device types (jsc#SLE-7753)
  - 4.2.34
* Mon Nov 25 2019 Knut Anderssen <kanderssen@suse.com>
  - Fix wireless mode and auth_mode initialization (bsc#1157394)
  - 4.2.33
* Mon Nov 25 2019 Knut Anderssen <kanderssen@suse.com>
  - Added a special type for the "Unknown" interfaces omitting them
    from the interfaces list (bsc#1156285)
  - 4.2.32
* Mon Nov 25 2019 Knut Anderssen <kanderssen@suse.com>
  - Ignores invalid udev rules parts (bsc#1157361)
  - 4.2.31
* Thu Nov 21 2019 Knut Alejandro Anderssen González <knut.anderssen@suse.com>
  - Firsboot dhcp: Ensure the network configuration has been read
    before trying to configure it by dhcp (bsc#1157429)
  - 4.2.30
* Thu Nov 21 2019 Michal Filka <mfilka@suse.com>
  - bnc#1153198, fate#319639
    - implemented proper hostname setup in installation for the new
      backend
  - 4.2.29
* Tue Nov 19 2019 David Diaz <dgonzalez@suse.com>
  - Do not crash when wrapping text (bsc#1157161)
  - 4.2.28
* Tue Nov 12 2019 Josef Reidinger <jreidinger@suse.com>
  - fix importing dhclient_set_hostname key from autoyast profile
    (bsc#1152021)
  - 4.2.27
* Sun Nov 10 2019 Knut Anderssen <kanderssen@suse.com>
  - Wireless: Fix wpa auth modes selection removing the prefix from
    the combobox value which is not used when writing the config.
    (bsc#1155639)
  - 4.2.26
* Fri Nov 08 2019 Knut Anderssen <kanderssen@suse.com>
  - Live installation:
    - Do not try to configure dhcp when NetworkManager is in use.
    - Show the general tab in the lan client allowing to switch
      between backends when systemd is running.
    - Do not do a netconfig update during an installation for not
      breaking the current resolv configuration.
  - 4.2.25
* Fri Nov 01 2019 Josef Reidinger <jreidinger@suse.com>
  - fix typo in remote desktop file (thanks for contribution
    to Markus S aka kamikazow) (bsc#1155584)
  - 4.2.24
* Tue Oct 15 2019 Josef Reidinger <jreidinger@suse.com>
  - Fix crash caused by type in widget method (caused in 4.2.22 by
    rubocop done as side-effect of bsc#1153673 fix)
  - 4.2.23
* Mon Oct 14 2019 Knut Anderssen <kanderssen@suse.com>
  - bsc#1153673
    - Fix Yast::Logger dependency in bridge connection config.
  - 4.2.22
* Wed Oct 09 2019 Josef Reidinger <jreidinger@suse.com>
  - Update reference in VLAN, Bridge or Bond when its device is
    removed or renamed (bsc#1153460)
  - 4.2.21
* Mon Oct 07 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Place sysctl settings in /etc/sysctl.d/ (jsc#SLE-9077).
  - 4.2.20
* Mon Oct 07 2019 Knut Anderssen <kanderssen@suse.com>
  - AutoYaST: Added back the activation of s390 devices during the
    first stage as it was removed when switched to the new data model
* Fri Oct 04 2019 Josef Reidinger <jreidinger@suse.com>
  - Fix CLI tests for network (bsc#957537)
  - 4.2.19
* Thu Oct 03 2019 Josef Reidinger <jreidinger@suse.com>
  - Fix blink positioning in UI (bsc#1119407)
  - 4.2.18
* Wed Oct 02 2019 Knut Anderssen <kanderssen@suse.com>
  - bsc#1152840
    - Fix interface ipaddr and prefixlen in the cloned profile.
  - 4.2.17
* Wed Oct 02 2019 Josef Reidinger <jreidinger@suse.com>
  - Adapt network CLI to new data model with improved error reporting
    (bsc#1151242)
  - 4.2.16
* Wed Oct 02 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - boo#1152748:
    - Fix detection of the network status during installation.
  - 4.1.15
* Tue Oct 01 2019 Knut Anderssen <kanderssen@suse.com>
  - AY: Fix interface name check for using the fallback when not set.
* Tue Oct 01 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - boo#1152627
    - Fix circular dependency between DNS and Host modules
    - Remove unneeded code related to the already dropped feature to write the hostname
      to /etc/hosts.
  - 4.2.14
* Fri Sep 20 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - bsc#1151491
    - Completed the new data model (support for TUN/TAP, bridges,
      bonding, VLANs, etc.).
    - Switched to use the new data model.
    - New wireless configuration workflow.
    - Revamped support for interfaces renaming and drivers assignment, including
      better udev rules handling.
    - Fixed /etc/hosts handling when switching from static to DHCP based configuration.
    - Many small fixes in different areas.
  - 4.2.13
* Tue Sep 10 2019 Michal Filka <mfilka@suse.com>
  - bnc#1149234
    - apply udev rule from AY profile according to device's mac
      value when permanent_mac is missing in list of the device's
      options
  - bsc#1133442
    - Increased the DHCP timeout when NetworkManager is in use to
      its default (45 seconds).
  - 4.2.12
* Tue Jul 30 2019 Dominique Leuenberger <dimstar@opensuse.org>
  - Requires hostname: there are many places where the module calls
    /bin/hostname (boo#1142595).
  - 4.2.11
* Fri Jul 19 2019 Josef Reidinger <jreidinger@suse.com>
  - avoid dependency on autoyast2-installation
  - 4.2.10
* Wed Jul 17 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Revamp UI internals, adding new widgets, sequences and
    introducing the concept of interface builder.
  - Add initial bits of the new data model.
  - Fix several bugs that were introduced in version 4.2.2.
  - 4.2.9
* Wed Jul 03 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - The 'lan' client returns the correct value (bsc#1140199).
  - 4.2.8
* Wed Jul 03 2019 Knut Anderssen <kanderssen@suse.com>
  - bsc#1137346
    - CLI: Report an error instead of raising an exception when the
      device type is not provided and there is no way to infer it
      from the given options.
* Fri Jun 14 2019 Knut Anderssen <kanderssen@suse.com>
  - boo#1138297
    - Improve some mocking in NetworkService.activate_network_service
      unit test which caused some test to fail randomly.
  - 4.2.7
* Fri Jun 14 2019 Knut Anderssen <kanderssen@suse.com>
  - boo#1138278
    - Adapt the AddressDialog to use the new Y2Network::Routing class
      when checking if there is some default gateway defined.
  - 4.2.6
* Wed Jun 12 2019 Knut Anderssen <kanderssen@suse.com>
  - bsc#1136929
    - Use the hwinfo permanent mac address instead of the current mac
      which could be wrong in case of an enslaved interface.
  - bsc#1137324
    - Do not create duplicate udev rule attributes when editing an
      interface name.
  - boo#903889
    - When proposing a bridge configuration for virtualization, move
      the routes from the enslaved interface to the new bridge.
  - 4.2.5
* Fri Jun 07 2019 Stasiek Michalski <hellcp@mailbox.org>
  - Use new schema of desktop files (boo#1084864)
  - Clean up spec
  - Rename desktop files
  - 4.2.4
* Mon May 20 2019 Michal Filka <mfilka@suse.com>
  - bnc#1131588
    - display a confirmation popup when static route is going to be
      removed when switching a device to dhcp
  - 4.2.3
* Wed Apr 24 2019 knut.anderssen@suse.com
  - Started with yast2-network refactorization:
    - Added the y2network namespace.
    - Dropped not used routing_auto client.
    - Reimplemented completely routing configuration droping the old
      Yast::Routing module.
    - The Y2Network::Routing configuration permits to have multiple
      default routes and does not drop extra options for them. That
      is, different routing tables can be used. (fate#326796)
  - 4.2.2
* Mon Apr 22 2019 Imobach Gonzalez Sosa <igonzalezsosa@suse.com>
  - Fix mode/second_stage value initialization (bsc#1132057)
  - 4.2.1
* Fri Apr 05 2019 jreidinger <jreidinger@suse.com>
  - publish find dhcp interfaces to component system, so yapi can be
    dropped from yast2-samba-client (fate#323734)
  - 4.2.0
* Thu Apr 04 2019 knut.anderssen@suse.com
  - bnc#1129012
    - AY: Use the bus_id of the udev parent device when using virtio
      netcards and matching the existent rules with the defined in
      in the profile.
  - 4.1.45
* Thu Apr 04 2019 schubi@suse.de
  - Showing correct start mode for nfsroot device (bsc#1105692).
* Thu Mar 21 2019 knut.anderssen@suse.com
  - bnc#1094934
    - Fixed internal error when writing remote configuration by
      cmdline (yast remote allow set=yes).
  - 4.1.44
* Wed Mar 06 2019 Ladislav Slezák <lslezak@suse.cz>
  - Fixed "can't modify frozen String" crashes (related to
    bsc#1125006 and gh#yast/yast-ruby-bindings#228)
  - 4.1.43
* Wed Feb 27 2019 knut.anderssen@suse.com
  - Installation proposal (bsc#1127228, bsc#1124478, bsc#1124498):
    - Fixed issue refreshing the list of packages needed for the
      default backend the first time the proposal is called.
    - Do not cache the default network backend but only the current
      one when modified by the user in the proposal
    - Fallback to :wicked when saving the network if NetworkManager
      is selected as the service to be used but not installed.
  - 4.1.42
* Thu Feb 21 2019 knut.anderssen@suse.com
  - When renaming an interface (bsc#1060207):
    - Offer to the user the option to update device routes that
      belongs to the previous interface name.
    - Update the Routing devices list with the new one when needed.
  - Do not drop configured elements from the list when canceling
    an edition (bsc#998540)
  - 4.1.41
* Tue Feb 19 2019 knut.anderssen@suse.com
  - Installation proposal (bsc#1124478, bsc#1124498):
    - Do not offer NetworkManager when the package is not available
    - Respect the network backend selected in the proposal at the end
      of the installation
    - Removed the hostname write (127.0.0.2) from the summary
  - 4.1.40
* Tue Feb 12 2019 schubi@suse.de
  - AutoYaST in running system: Do not reset /etc/hosts (bsc#1122658)
  - 4.1.39
* Thu Feb 07 2019 knut.anderssen@suse.com
  - fate#324662
    - Drop SuSEFirewall2 code completely.
    - Permits to choose not only default firewalld zones but also
      custom ones.
    - Allow the user to select the "DEFAULT" zone or disable the
      interface zone mapping through ifcfg files per interface.
  - 4.1.38
* Wed Feb 06 2019 knut.anderssen@suse.com
  - bsc#1124002
    - do not crash when cloning and trying to read a device protocol
      or portname.
  - 4.1.37
* Tue Jan 29 2019 mfilka@suse.com
  - bnc#1123102
    - do not crash with internal error when no hostname is set when
      submitting device with static configuration
  - 4.1.36
* Fri Jan 25 2019 knut.anderssen@suse.com
  - bsc#112952
    - Try to install the wireless-tools package when the package is
      not installed and the wifi networks are scanned.
  - 4.1.35
* Wed Jan 23 2019 mfilka@suse.com
  - bnc#1122387
    - do not crash with internal error when modifying /etc/hosts
  - 4.1.34
* Tue Jan 22 2019 mfilka@suse.com
  - bnc#1122517
    - do not crash with internal error when cloning /etc/hosts
  - 4.1.33
* Fri Jan 18 2019 mfilka@suse.com
  - bnc#1122307
    - do not crash with internal error when adding new device
  - 4.1.32
* Fri Jan 18 2019 schubi@suse.de
  - AutoYaST write settings: Fixed crash while reading MAC address
    (bsc#1121087).
  - 4.1.31
* Wed Jan 16 2019 mfilka@suse.com
  - bnc#1121421
    - do not crash with internal error when installing using
      AutoYaST profile with networking section
  - 4.1.30
* Thu Jan 10 2019 mfilka@suse.com
  - bnc#1111483
    - write physical device into vlan's configuration
  - 4.1.29
* Fri Jan 04 2019 schubi@suse.de
  - Added needed method GetDHCPHostnameIP again (bsc#1119690).
  - 4.1.28
* Fri Jan 04 2019 mfilka@suse.com
  - bnc#1116568
    - /etc/hosts load performance improvements
  - 4.1.27
* Wed Jan 02 2019 schubi@suse.de
  - Showing correct start mode for nfsroot device (bsc#1105692).
  - 4.1.26
* Tue Dec 18 2018 mfilka@suse.com
  - bnc#1119723
    - properly copy ifcfg files from instsys to target
  - 4.1.25
* Mon Dec 10 2018 jreidinger@suse.com
  - always use absolute path to binaries (bsc#1118291)
  - properly escape shell arguments (bsc#1118291)
  - 4.1.24
* Mon Dec 10 2018 Stefan Hundhammer <shundhammer@suse.com>
  - Security audit fixes: Removed unused function stdout_of()
    (part of bsc#1118291)
  - 4.1.23
* Thu Dec 06 2018 Stefan Hundhammer <shundhammer@suse.com>
  - Security audit fixes: Use absolute paths when calling external
    commands and shell-escape arguments (bsc#1118291)
  - 4.1.22
* Tue Dec 04 2018 mfilka@suse.com
  - bnc#1114213
    - improved help for dns nameserver address to mention also valid
      format of IPv6
  - 4.1.21
* Thu Nov 29 2018 Noah Davis <noahadvs@gmail.com>
  - Provide icon with module (boo#1109310)
  - 4.1.20
* Mon Nov 26 2018 mfilka@suse.com
  - bnc#934055, bnc#972463
    - cleanup in Hostname / DNS tab - removed obsolete or unsupported
      options.
  - 4.1.19
* Mon Nov 26 2018 mfilka@suse.com
  - bnc#709176
    - keep original hostnames untouched in /etc/hosts when only IP
      changed
  - 4.1.18
* Thu Nov 22 2018 mfilka@suse.com
  - bnc#1107470
    - this bug is fixed since 4.0.14 (3.2.47)
* Sun Nov 11 2018 knut.anderssen@suse.com
  - Yast::Lan: Added method for obtaining the NTP servers offered by
    DHCP (fate#323454)
  - 4.1.17
* Fri Nov 09 2018 dgonzalez@suse.com
  - Allow to swich the network backend from the proposal (related to
    fate#326480)
  - 4.1.16
* Wed Oct 31 2018 mfilka@suse.com
  - bnc#1111925
    - always propose wpa_supplicant when configuring wlan
  - bsc#1113080
    - Fix detection of peap mode (jreidinger@suse.com)
  - Propose most commonly used setup for WPA by default
  - 4.1.15
* Wed Oct 24 2018 jreidinger@suse.com
  - Fix detection of peap mode (bsc#1113080)
  - 4.1.14
* Tue Oct 16 2018 knut.anderssen@suse.com
  - Simplified the installation network proposal collecting all the
    configured dhcp interfaces in a single entry (fate#326480)
  - 4.1.13
* Tue Oct 16 2018 mfilka@suse.com
  - bsc#1110598
    - fixed path to license file
  - 4.1.12
* Mon Oct 15 2018 mfilka@suse.com
  - fate#323454
    - wicked compatible parsing of NTP servers from  dhcp leases
  - 4.1.11
* Thu Oct 04 2018 knut.anderssen@suse.com
  - Fixes to the networking AY schema (bsc#1108852)
    - Added missed s390 device 'layer2' boolean element.
  - 4.1.10
* Wed Oct 03 2018 mfilka@suse.com
  - bnc#1105230
    - do not crash with internal error when 0.0.0.0 netmask is used
      in the routing tab
  - Activate s390 network devices before applying udev naming rules,
    avoiding "Invalid key/value pair in
    /etc/udev/rules.d/70-persistent-net.rules" (bsc#1095761)
    (by mvidner@suse.com)
  - 4.1.9
* Tue Oct 02 2018 mfilka@suse.com
  - bnc#1109312
    - fixed internal error (replaced calls to LanItems::FreeDevices
      which was removed)
  - 4.1.8
* Tue Sep 18 2018 mfilka@suse.com
  - bnc#964856
    - adapted to changes in NetworkInterfaces API
    - GetFreeDevice and GetFreeDevices was dropped
  - 4.1.7
* Wed Aug 22 2018 dgonzalez@suse.com
  - Update calls to YaST2 systemd classes (related to fate#319428)
  - 4.1.6
* Tue Aug 21 2018 schubi@suse.de
  - Changed dir of COPYING file.
* Fri Aug 03 2018 knut.anderssen@suse.com
  - Fixes to the networking AY schema (bsc#1103712)
    - Permitted the use of 'listentry' element in list entries.
  - 4.1.5
* Thu Jul 12 2018 mfilka@suse.com
  - bnc#964856
    - dropped calls to obsolete NetworkInterfaces API
    - CLI: setting device type explicitly using new type option is
      mandatory when adding new device
  - 4.1.4
* Mon Jul 02 2018 schubi@suse.de
  - lan_test: stubbin Host.GetModified call (bnc#1052042).
  - 4.1.3
* Mon Jul 02 2018 schubi@suse.de
  - Fixed flickering testcase which has been introduced by fixing
    bnc#1052042.
  - 4.1.2
* Thu Jun 28 2018 schubi@suse.de
  - Added additional searchkeys to desktop file (fate#321043).
* Tue Jun 26 2018 mfilka@suse.com
  - removed NetworkStorage as it is unused (had been replaced by
    storage-ng)
* Fri Jun 22 2018 schubi@suse.de
  - Removed AutoYaST dependencies in order to run the host module
    without AutoYaST packages (bnc#1098407).
  - 4.1.1
* Wed Jun 20 2018 mfilka@suse.com
  - dropped dead code
  - 4.1.0
* Wed Jun 20 2018 mfilka@suse.com
  - bnc#1086454
    - do not enforce particular mode for IPoIB devices by default
  - 4.0.35
* Mon Jun 18 2018 mfilka@suse.com
  - bnc#1097954
    - fixed several rpmlint warnings
  - 4.0.34
* Tue Jun 12 2018 schubi@suse.de
  - AutoYaST: Checking for empty host name entries and informing
    the user. (bnc#1095113)
    4.0.33
* Thu Jun 07 2018 knut.anderssen@suse.com
  - AutoYaST: Do not crash when trying to convert the /etc/hosts
    profile declaration from multiple line host entries for the same
    host to just one line (bnc#1095971)
  - 4.0.32
* Wed May 09 2018 knut.anderssen@suse.com
  - Fix the check for adjusting ifcfg configuration in case of
    network based root filesystem when saving the network at the end
    of the installation (bsc#1090752).
  - 4.0.31
* Wed Apr 25 2018 knut.anderssen@suse.com
  - Y2remote: When vnc is disabled disable also all the services that
    are still enabled (bsc#1088646)
  - 4.0.30
* Wed Apr 25 2018 mfilka@suse.com
  - bnc#1077435
    - do not crash with internal error when /etc/hosts is corrupted
  - 4.0.29
* Mon Apr 23 2018 mfilka@suse.com
  - bnc#1089471
    - previous fix contains wrong check of ifcfg options and proposes
      wpa_supplicant incorrectly. The check was fixed and
      wpa_supplicant is proposed when needed only.
  - 4.0.28
* Sat Apr 21 2018 mfilka@suse.com
  - bnc#1089471
    - do not propose vlan, iw and tunctl packages for installation as
      its functionality is implemented by wicked.
  - 4.0.27
* Thu Apr 19 2018 knut.anderssen@suse.com
  - Y2Remote:
    - Fixed the start of services when writing (bsc#1088646)
    - Fixed the modification of vnc services configuration according
      to the selection of allowed interfaces (bsc#1088647)
  - 4.0.26
* Fri Apr 06 2018 knut.anderssen@suse.com
  - Fixed preformatted proposal for network module (bsc#1088488)
  - 4.0.25
* Tue Mar 27 2018 lslezak@suse.cz
  - Added missing "textdomain" call to properly translate the
    web access check box label (bsc#1081466)
  - 4.0.24
* Wed Mar 21 2018 knut.anderssen@suse.com
  - Added networking interfaces 'zone' element to the AutoYaST schema
    file (bsc#1013047)
  - 4.0.23
* Fri Mar 16 2018 knut.anderssen@suse.com
  - Read and write the firewalld configuration when the remote access
    is configured through the remote client dialog (bsc#1085658)
  - 4.0.22
* Thu Mar 08 2018 knut.anderssen@suse.com
  - bsc#1078991
    - Do not crash when some LanItem does not have hardware info.
  - 4.0.21
* Tue Mar 06 2018 knut.anderssen@suse.com
  - Tigervnc will provide the definition of firewalld services so
    we will use them instead of the vnc-server service definition
    that is shipped with firewalld (bsc#1081952)
  - 4.0.20
* Thu Mar 01 2018 knut.anderssen@suse.com
  - save_network client copies wicked dhcp files from inst-sys into
    the target using the same dhcp id when rebooting after
    installation. (bsc#1082832)
  - 4.0.19
* Thu Mar 01 2018 lslezak@suse.cz
  - Fixed a random build failure (introduced by the previous fix for
    bsc#1083015)
  - 4.0.18
* Tue Feb 27 2018 jreidinger@suse.com
  - add missing textdomains (bsc#1083015)
  - 4.0.17
* Fri Feb 23 2018 knut.anderssen@suse.com
  - Really translate firewalld zones (bsc#1082246)
  - 4.0.16
* Wed Feb 14 2018 knut.anderssen@suse.com
  - Virtualization Bridge Proposal: Do not propose network interfaces
    without link as bridgeable (bsc#1062596, bsc#1072951).
  - 4.0.15
* Wed Jan 24 2018 mfilka@suse.com
  - bnc#1056109
    - improved device name collision recognition when applying device
      renaming according to the AY profile
  - 4.0.14
* Mon Dec 11 2017 knut.anderssen@suse.com
  - Remote: reimplemented the module dialogs and clients under
    y2remote libdir.
  - Fixed restart of xvnc as it is now a socket instead of a service
    (bsc#1070582).
  - 4.0.13
* Mon Dec 04 2017 mfilka@suse.com
  - bnc#1061306
    - use API for accessing device's sysconfig to avoid internal
      errors
  - 4.0.12
* Wed Nov 29 2017 knut.anderssen@suse.com
  - Switched VNC service from xinetd to systemd.
  - VNC over HTTP service can be enabled/disabled separately.
    (fate#323880, bnc#1058460)
  - 4.0.11
* Fri Nov 24 2017 knut.anderssen@suse.com
  - Do not depend on SuSEFirewall for zone interface change. The zone
    is now written in the ifcfg-file and wicked takes care of calling
    firewalld commandline. (fate#323460)
  - 4.0.10
* Wed Nov 22 2017 knut.anderssen@suse.com
  - AutoYaST: Do not display a warning about second stage being
    disabled when importing the DNS configuration (added in 3.3.1)
    once  the network configuration is done during the first stage
    (since version 3.3.3) (bsc#1069761)
  - 4.0.9
* Wed Nov 15 2017 knut.anderssen@suse.com
  - bnc#1066982
    - Removed an unnecesary SuSEFirewall.Write call when storing the
      Firewall remote client configuration.
  - 4.0.8
* Tue Nov 14 2017 jreidinger@suse.com
  - bnc#1066982
    - fixed initialization and storing of firewall widget
  - 4.0.7
* Fri Nov 03 2017 knut.anderssen@suse.com
  - Fixed a method name typo and removed SuSEFirewall from Routing
    module (bsc#572202)
  - 4.0.6
* Wed Nov 01 2017 mfilka@suse.com
  - bnc#1052042
    - properly update canonical name and aliases in /etc/hosts when
      FQDN is provided as a hostname
  - 4.0.5
* Wed Oct 25 2017 knut.anderssen@suse.com
  - Do not depend on SuSEfirewall2 anymore for writing IPv4
    forwarding as Firewalld will be the default FW in SLE15.
    (fate#323460, bsc#572202)
  - 4.0.4
* Thu Oct 05 2017 schubi@suse.de
  - Remote settings: Only reading firewall settings if we are really
    in an installed system. (bnc#1055279, bnc#1058071)
  - 4.0.3
* Wed Oct 04 2017 knut.anderssen@suse.com
  - AutoYaST: Do not display a warning about disabled second stage
    when if network is configured before the proposal (bsc#1054400)
  - 4.0.2
* Fri Sep 29 2017 knut.anderssen@suse.com
  - Do not blank out /etc/hosts when no <host> section is defined
    (bsc#1058396)
  - 4.0.1
* Tue Sep 26 2017 knut.anderssen@suse.com
  - Preload the global DHCLIENT_SET_HOSTNAME option based on linuxrc
    sethostname option if given or based in control file default if
    not. (bsc#1054933)
  - Do not override the configuration with the default defined in
    the control file at the end of the first stage (bsc#1056633)
  - 4.0.0
* Wed Aug 30 2017 knut.anderssen@suse.com
  - Moved wrap_text method to yast2 UI::TextHelpers (bsc#1055643)
  - 3.3.12
* Mon Aug 21 2017 lslezak@suse.cz
  - AutoYaST: Do not display a warning about disabled second stage
    when the hostname setting is read out of profile (bsc#1054400)
  - 3.3.11
* Mon Aug 21 2017 mfilka@suse.com
  - bnc#1039656
    - do not clear /etc/hosts when installing virtual Host
* Thu Aug 17 2017 mfilka@suse.com
  - restored part of version 3.3.3 (bnc#1049814) which was
    accidentaly dropped in subsequent versions
  - 3.3.10
* Thu Aug 17 2017 snwint@suse.de
  - use storage-ng code to determine if "/" is on a network filesystem
  - 3.3.9
* Mon Aug 14 2017 snwint@suse.com
  - merge storage-ng branch to master (fate#318196)
  - note: all changes below with this date belong to the merge
  - 3.3.8
* Mon Aug 14 2017 ancor@suse.com
  - storage-ng: adapted calls to temporary y2storage_* methods, since
    they were finally removed from Y2Storage::StorageManager.
* Mon Aug 14 2017 gsouza@suse.com
  - Added support to storage-ng so it can verify if a disk is in
    network.
  - Updated dependencies to include storage-ng.
* Mon Aug 14 2017 shundhammer@suse.de
  - Merged master to storage-ng branch
* Mon Aug 14 2017 ancor@suse.com
  - Version temporarily bumped to 3.3.x to prioritize the
    storage-ng branch
* Mon Aug 14 2017 ancor@suse.com
  - storage-ng: commented remaining code relying on the old
    yast2-storage
  - Removed yast2-storage dependency
* Mon Aug 14 2017 ancor@suse.com
  - storage-ng: commented installation-related code relying on the
    old yast2-storage
  - Version temporarily bumped to 3.2.x to prioritize this branch
* Mon Aug 14 2017 mfilka@suse.com
  - bnc#1047615
    - check if /etc/hosts exists before loading its content
  - 3.3.7
* Tue Aug 08 2017 igonzalezsosa@suse.com
  - bnc#1037727
    - fixed device name recognition during AY installation
  - 3.3.6
* Wed Aug 02 2017 knut.anderssen@suse.com
  - bsc#1051624
    - Fix default values for not existent sysconfig network variables
      when read.
  - 3.3.5
* Fri Jul 28 2017 igonzalezsosa@suse.com
  - bnc#1050986
    - fix udev rules export when more than one device is configured
  - bnc#1037727
    - dhclient configuration warning message does not block AutoYaST
  - 3.3.4
* Thu Jul 27 2017 knut.anderssen@suse.com
  - bsc#1039851
    - Host: Load /etc/hosts entries before import the ones defined in
      a given AutoYaST profile making it backward compatible.
* Wed Jul 12 2017 mfilka@suse.com
  - bnc#1038717
    - avoid creating duplicate udev rules in AutoYaST installation
* Tue Jul 11 2017 mfilka@suse.com
  - bnc#1049814
    - Moving network setup in AY into first stage completely when
      the second stage is disabled.
  - 3.3.3
* Mon Jul 10 2017 jreidinger@suse.com
  - Fix crash during write if Host.Read and Host.Import is called
    together (bsc#1047929)
  - 3.3.2
* Tue Jul 04 2017 lslezak@suse.cz
  - Display a warning in AutoYaST installation when importing the DNS
    configuration with disabled seconds stage (the second stage is
    currently required for writing the config) (bsc#1046198)
  - 3.3.1
* Tue Jul 04 2017 mfilka@suse.com
  - bnc#1046735
    - do not update sysconfig when no IP is given in case of static
      NIC configuration.
* Tue Jul 04 2017 mfilka@suse.com
  - bsc#1044982
    - handle bad pci class/subclass ids used by Mellanox ConnectX-3
    - nmoreychaisemartin@suse.com
  - 3.3.0
* Tue Jul 04 2017 mfilka@suse.com
  - bnc#1046677
    - disable widgets which cannot be configured by the selected
      network service
  - 3.2.29
* Thu May 25 2017 mfilka@suse.com
  - bnc#1039532
    - do not write hostname into /etc/hosts duplicitly for one IP
    - configure static IPs without own hostname to resolve to system
      wide hostname during installation
  - 3.2.28
* Mon May 22 2017 gsouza@suse.com
  - bsc#1036440 and bsc#994471
    - Command "yast remote list" should not alter the system.
  - 3.2.27
* Wed May 17 2017 mfilka@suse.com
  - bnc#1038521
    - do not raise an internal error during installation when
      multiple static device and hostname configurations were
      provided
  - 3.2.26
* Tue May 16 2017 knut.anderssen@suse.com
  - bsc#1035908
    - Moved inst_install_inf client to yast2-installation.
  - 3.2.25
* Tue Apr 04 2017 knut.anderssen@suse.com
  - bsc#956755
    - Don't propose wlan interfaces for the virtualization bridge.
  - 3.2.24
* Mon Apr 03 2017 mfilka@suse.com
  - bnc#927629
    - improved adding routes. Accepts netmask or prefix length.
    - fixed column name in add route dialog from Genmask to more
      common Netmask
  - 3.2.23
* Thu Mar 30 2017 knut.anderssen@suse.com
  - Fix typo in edit_nic_name dialog using bus_id instead of busid
    (bsc#1031120)
  - 3.2.22
* Tue Mar 21 2017 jreidinger@suse.com
  - adapt to new version of cfa (new cfa needed for bsc#1023204)
  - 3.2.21
* Wed Feb 22 2017 mfilka@suse.com
  - bnc#1020074
    - when incomplete udev rule is read from the AY profile, it is
      ignored instead of raising an internal error.
  - 3.2.20
* Thu Jan 19 2017 kanderssen@suse.com
  - Added network proposal using the new summary api and the new
    proposal_client flag 'label_proposal' for CASP special formmating
    (fate#322328).
  - 3.2.19
* Wed Jan 18 2017 kanderssen@suse.com
  - Added summaries for the configured interfaces, particulary an one
    line summary. (fate#322328)
* Wed Jan 11 2017 kanderssen@suse.com
  - Fixed the assignment of udev rules to Lan Items when a previous
    one does not exist (bsc#996879).
  - 3.2.18
* Fri Dec 09 2016 mfilka@suse.com
  - bnc#1013605
    - Enable DHCP_HOSTNAME listbox only when wicked service is used.
    - Fixed displaying the "keep current settings" option.
  - 3.2.17
* Wed Dec 07 2016 mfilka@suse.com
  - bnc#1013684
    - do not crash with internal error when setting static setup for
      newly added device
  - 3.2.16
* Wed Nov 30 2016 kanderssen@suse.com
  - Linuxrc does not export some variables anymore and handles the
    configuration of network directly, for that reason, some methods
    or reponsibilities of InstallInfConvertor class are not needed
    being removed.
* Wed Nov 30 2016 mfilka@suse.com
  - bnc#1012764
    - made rpm architecture independent (noarch)
  - 3.2.15
* Tue Nov 29 2016 mfilka@suse.com
  - bnc#1012581
    - do not crash with internal error stating undefined method when
      switching to "Hostname / DNS" tab when the system contains
      incorrect configuration of DHCLIENT_SET_HOSTNAME
  - 3.2.14
* Mon Nov 28 2016 mfilka@suse.com
  - bnc#1009931
    - update item's overview with freshly edited values
  - 3.2.13
* Wed Nov 23 2016 mfilka@suse.com
  - bsc#984890
    - new implementation of setting hostname via DHCP. User is
      allowed to set hostname via particular interface or set a
      reasonable default value for all interfaces.
  - bsc#1007172 (kanderssen@suse.com)
    - When an interface is enslaved in a bond the udev rule is modified
      using the bus_id instead of the mac address but some multiport
      cards could use the same bus_id. In such cases also the dev_port
      is needed. Taking this in account the dev_port will be added
      always when a udev rule based on bus_id is written.
  - 3.2.12
* Tue Nov 22 2016 igonzalezsosa@suse.com
  - Do not crash when removing an entry from the /etc/hosts file
    (bsc#1010994)
  - 3.2.11
* Tue Nov 22 2016 jreidinger@suse.com
  - do not crash when on command line is passed non-number id
    (bsc#1003908)
  - 3.2.10
* Thu Oct 27 2016 jreidinger@suse.com
  - Make network summary consistent with other summaries
    (bsc#745940)
  - 3.2.9
* Tue Oct 25 2016 mvidner@suse.com
  - Fixed a hardcoded interface name in a CLI test (bsc#1006799)
  - 3.2.8
* Mon Oct 17 2016 kanderssen@suse.com
  - Bridge handling has been improved (bsc#962824).
    - "NONE" is shown instead of 0.0.0.0 for old bridge configuration
    - The bridge master is shown in the enslaved interface.
    - The interfaces overview is updated after a bridge is modified
    - The interfaces enlsaved are not lost when save in a different
      tab.
  - 3.2.7
* Mon Oct 17 2016 jreidinger@suse.com
  - fix crash when dummy ip is not needed
    (found during testing of bsc#877047)
  - 3.2.6
* Fri Oct 14 2016 jreidinger@suse.com
  - optimize loading /etc/hosts if there is a lot of entries
    (bsc#877047)
  - 3.2.5
* Mon Oct 10 2016 mfilka@suse.com
  - do not duplicate work of network service at the beginning of
    AutoYaST's second stage - not loading modules and so on.
  - 3.2.4
* Fri Oct 07 2016 kanderssen@suse.com
  - If an interface is not configured yet then just set the interface
    link, the backend should handle at least the up event.
    (bsc#991694)
  - 3.2.3
* Fri Oct 07 2016 ancor@suse.com
  - Extra space in the remote administration dialog (bsc#988904)
* Thu Oct 06 2016 mfilka@suse.com
  - Use full interface up / down instead of setting just link
    up / down to allow proper update of interface's configuration.
    (bsc#991694)
  - 3.2.2
* Wed Oct 05 2016 ancor@suse.com
  - If WIFI is configured during installation, make sure the packages
    required for WIFI to work are installed in the resulting system
    (bsc#1002700)
  - 3.2.1
* Wed Sep 21 2016 jreidinger@suse.com
  - reduce rpm build time (bsc#999203)
  - 3.2.0
* Wed Sep 07 2016 mfilka@suse.com
  - bnc#993587
    - extended fix from 3.1.168 to cover also virtual interfaces
  - 3.1.170
* Sat Sep 03 2016 mfilka@suse.com
  - bnc#988157
    - disable DHCP autoconfiguration in installer when an interface
      configuration is provided via linuxrc
  - 3.1.169
* Wed Aug 24 2016 mfilka@suse.com
  - bnc#993587
    - installer is able to newly configured set devices up in case of
      ssh/vnc installation
  - 3.1.168
* Fri Aug 19 2016 mfilka@suse.com
  - bnc#991382
    - init and store IFPLUGD_PRIORITY properly
  - 3.1.167
* Thu Aug 18 2016 mfilka@suse.com
  - bnc#991486
    - extended fix for this bug from 3.1.163. Do not report invalid
      names incorrectly
  - 3.1.166
* Thu Aug 11 2016 mfilka@suse.com
  - bnc#985905
    - do not limit number of bonding slaves to 10
  - 3.1.165
* Thu Aug 11 2016 mfilka@suse.com
  - bnc#988786
    - Create bridge when proposing configuration for VM host.
  - 3.1.164
* Wed Aug 10 2016 ancor@suse.com
  - Improved parsing of vlan ids that are longer than one character.
* Wed Aug 10 2016 mfilka@suse.com
  - bnc#991486
    - Do not allow creating device with oversized configuration name.
  - 3.1.163
* Tue Aug 09 2016 schubi@suse.de
  - Added entry "s390-devices" to the AutoYaST schema file.
    Bug similar bnc#954412.
  - 3.1.162
* Tue Aug 09 2016 mfilka@suse.com
  - bnc#991920
    - do not crash with internal error when renaming unconfigured
      device
  - 3.1.161
* Tue Aug 02 2016 mfilka@suse.com
  - bnc#991382
    - Do not crash with internal error when using "On Cable
      Connection" device activation mode.
  - 3.1.160
* Tue Jul 12 2016 schubi@suse.de
  - Added entry "dhclient_set_hostname" to the AutoYaST schema file.
    Bug similar bnc#954412.
  - 3.1.159
* Thu Jun 23 2016 mfilka@suse.com
  - bnc#970320, bnc#865132, bnc#852604
    - do not overwrite Postfix MTA configuration when saving network
      setup
  - 3.1.158
* Tue Jun 21 2016 igonzalezsosa@suse.com
  - bsc#984146
    - set AutoYaST keep_install_network parameter to 'true' by
      default
    - restore the default behavior present in SLE 12 SP1 and
      openSUSE Leap 42.1
  - 3.1.157
* Tue Jun 14 2016 mfilka@suse.com
  - bnc#983201
    - do not crash with internal error when configuring new device on
      s390
  - 3.1.156
* Mon Jun 13 2016 mfilka@suse.com
  - fate#318787
    - detect modifications when closing module, do not restart when
      not needed.
  - 3.1.155
* Wed Jun 01 2016 igonzalezsosa@suse.com
  - Drop yast2-network-devel-doc package (fate#320356)
  - 3.1.154
* Tue May 31 2016 mfilka@suse.com
  - bnc#981842
    - enable / disable vncmanager only when installed to avoid
      failures in systemd calls
  - 3.1.153
* Thu May 19 2016 mfilka@suse.com
  - fate#319319
    - implemented support for vncmanager in Remote module. Thanks to
      msrb@suse.cz.
  - 3.1.152
* Tue May 17 2016 mfilka@suse.com
  - bnc#971175
    - /etc/hosts is correctly updated with static address, hostname
      when static net configuration is done via linuxrc and hostname
      is provided by AY profile
  - 3.1.151
* Fri May 13 2016 knut.anderssen@suse.com
  - fate#315995
    - Added physical port id to device overview and bond slaves item
      description if supported.
    - Warn the user when two or more bonded interfaces share the
      same physical port.
    - Available interfaces for bonding in bond slaves tab are now
      sorted and moving them up or down maintain the interface
      selected.
  - 3.1.150
* Mon May 02 2016 mfilka@suse.com
  - bnc#977953
    - added dependency on yast2-proxy. "yast2 lan" won't fail with
      internal error (missing Proxy module), when yast2-network is
      installed into a minimal server installation.
  - 3.1.149
* Tue Apr 19 2016 mfilka@suse.com
  - bnc#966694
    - TigerVNC Viewer Error: No matching security types. Do not touch
      VNC arguments when enabling or disabling it. Thanks to
      msrb@suse.com for the patch.
  - 3.1.148
* Tue Apr 12 2016 mfilka@suse.com
  - bnc#974910
    - fixed internal error when no "interfaces" group is found in an
      AY profile
  - 3.1.147
* Mon Apr 11 2016 mfilka@suse.com
  - bnc#955217, bnc#956605
    - fixed internal error caused by the previous patch
  - 3.1.146
* Mon Apr 04 2016 mfilka@suse.com
  - bnc#955217, bnc#956605
    - unified udev rule handling by always doing it in the 1st stage
      of installation.
  - 3.1.145
* Sun Mar 06 2016 mfilka@suse.com
  - bnc#920089
    - fix by Damir Porobic
    - fixed layout of dialog for new route definition
  - 3.1.144
* Mon Feb 22 2016 mfilka@suse.com
  - bnc#960703
    - sometimes wicked was started instead of NetworkManager in case
      of AY installation. Moreover it could happen that both services
      were "half-started" and network setup got broken.
  - bsc#903190
    - Recognized netcard with sub_class_id 07 as InfiniBand (ib) which
      now are not filtered out (knut.anderssen@suse.com).
  - 3.1.143
* Fri Jan 29 2016 knut.anderssen@suse.com
  - Removed old testsuites tests and autotools, so yast2-testsuite
    is not required anymore (fate#314695).
  - 3.1.142
* Fri Jan 22 2016 mvidner@suse.com
  - Fixed an Internal error when aborting the configuration of a
    WiFi interface (bsc#950902).
  - 3.1.141
* Wed Dec 02 2015 mfilka@suse.com
  - bnc#957377
    - When exporting AutoYaST profile, it contains dns configuration
      even when this config was provided via linuxrc.
  - 3.1.140
* Mon Nov 30 2015 mfilka@suse.com
  - bnc#951330
    - drop record from /etc/hosts when deleting nic configuration
  - bsc#954412 (igonzalezsosa@suse.com)
    - Fix validation of AutoYaST profiles
  - 3.1.139
* Wed Nov 25 2015 mfilka@suse.com
  - bnc#956605
    - Write udev rules for renamed devices for non ssh / vnc AutoYaST
      installations
  - 3.1.138
* Mon Nov 23 2015 mfilka@suse.com
  - bnc#956012
    - When exporting AutoYaST profile, it contains route definitions
      even when these routes were configured using linuxrc.
  - 3.1.137
* Mon Nov 16 2015 mfilka@suse.com
  - bnc#955217
    - do not raise internal error during AY installation with profile
      containing  device renaming rule for unconfigured interface
  - 3.1.136
* Mon Nov 16 2015 mfilka@suse.com
  - bnc#944349
    - do not set links down when running AY installation over vnc.
      VNC installation do not freeze.
    - renaming network devices during ssh/vnc installation is
      supported
  -3.1.135
* Sun Nov 08 2015 mfilka@suse.com
  - bnc#944349
    - do not set links down when running AY installation over ssh.
      SSH installation do not freeze.
  - 3.1.134
* Thu Oct 08 2015 mvidner@suse.com
  - Fixed "Relax-NG parser error : Some defines for ipv6_forward
    needs the combine attribute" when checking validity
    of any AutoYaST profile (bsc#948206).
  - 3.1.133
* Tue Oct 06 2015 mfilka@suse.com
  - bnc#900647
    - fixed to accept an empty domain in /etc/hostname
  - 3.1.132
* Thu Oct 01 2015 mvidner@suse.com
  - Moved "Network Settings" into "System" group also in the Gnome/GTK
    control center (FATE#318804, bsc#867809).
  - 3.1.131
* Wed Sep 23 2015 mfilka@suse.com
  - bnc#866742
    - Do not fail with internal error when cloning configuration
      twice in a row
  - 3.1.130
* Wed Sep 16 2015 mfilka@suse.com
  - bnc#945947
    - Routing module returns correct return code when invoked from
      command line
  - 3.1.129
* Thu Aug 27 2015 mfilka@suse.com
  - bnc#846201
    - made bridge port selection persistent across tab switching
  - 3.1.128
* Tue Aug 18 2015 mfilka@suse.com
  - bnc#940892
    - fixed internal error when importing AY profile
  - 3.1.127
* Tue Aug 18 2015 igonzalezsosa@suse.com
  - bsc#941948
    - lan_auto client returns value properly
  - 3.1.126
* Mon Aug 10 2015 mfilka@suse.com
  - bnc#916013
    - IPv4 forwarding always enabled upon finishing setup
  - 3.1.125
* Wed Aug 05 2015 mfilka@suse.com
  - bnc#916013
    - IPv6 forwarding setup is stored persistently
  - 3.1.124
* Fri Jul 31 2015 ancor@suse.com
  - bnc#940192, bnc#935937
    - fixed crash deleting interfaces using CLI (yast lan delete)
  - 3.1.123
* Wed Jul 01 2015 mfilka@suse.com
  - bnc#864264
    - fixed internal error in adding alias
  - 3.1.122
* Tue Jun 30 2015 mvidner@suse.com
  - Fixed warnings like 'duplicated key at line 230 ignored:
    "rt73usb"' (boo#930870)
    (recording a fix present in 3.1.116 already).
* Thu Jun 25 2015 mfilka@suse.com
  - bnc#922765, bnc#923990
    - fixed default domain proposal
  - 3.1.121
* Thu Jun 18 2015 mfilka@suse.com
  - bnc#930448
    - display proper startmode description in Overview dialogue
  - 3.1.120
* Mon Jun 15 2015 igonzalezsosa@suse.com
  - Fix handling of AutoYaST parameter keep_install_network
  - 3.1.119
* Thu Jun 11 2015 mfilka@suse.com
  - fate#318804
    - moved "Network Settings" into "System" group in YaST control
      centre
  - 3.1.118
* Wed Jun 10 2015 mfilka@suse.com
  - bnc#934180
    - fixed internal error in lan AutoYaST client.
  - 3.1.117
* Mon Jun 08 2015 mfilka@suse.com
  - bnc#874259
    - keep device configuration provided via linuxrc when autoyast
      keep_install_network is set
  - 3.1.116
* Mon May 18 2015 locilka@suse.com
  - bsc#916376
    - proposing iSCSI-related configuration in firewall proposal
      in first stage if iSCSI is in use
  - 3.1.115
* Mon Apr 27 2015 mfilka@suse.com
  - bnc#912904
    - do not crash when adding new device and proposed configuration
      name is changed to new one
  - bnc#914833
    - do not crash when renaming virtual device via hardware tab
  - bnc#910337
    - initialize configuration name in Hardware tab correctly. It
      means according device type. Also uses custom name if user
      used nonstandard one.
  - bnc#905738
    - udev rules provided by AutoYaST profile gets applied
  - bnc#918356
    - populate bond slave candidates list with proper device names
  - 3.1.114
* Wed Jan 28 2015 lslezak@suse.cz
  - fixed a build failure when building against the latest yast2
    package
  - 3.1.113
* Tue Dec 23 2014 mvidner@suse.com
  - Removed a bash specific post script with a workaround
    for an ancient bug (bnc#39842).
  - 3.1.112
* Thu Dec 04 2014 jreidinger@suse.com
  - remove X-KDE-Library from desktop file (bnc#899104)
* Fri Nov 28 2014 mfilka@suse.com
  - bnc#906694
    - fixed exception raised due to modifying frozen string when
      running in localized mode
  - 3.1.110
* Fri Oct 17 2014 mfilka@suse.com
  - bnc#898250, bnc#899363
    - ignore /etc/install.inf:usessh flag when the file is present in
      installed system and always reload / restart network service in
      case of updated configuration
  - 3.1.109

Files

/usr/lib/YaST2/servers_non_y2
/usr/lib/YaST2/servers_non_y2/ag_udev_persistent
/usr/share/YaST2/clients
/usr/share/YaST2/clients/dns.rb
/usr/share/YaST2/clients/host.rb
/usr/share/YaST2/clients/host_auto.rb
/usr/share/YaST2/clients/inst_lan.rb
/usr/share/YaST2/clients/inst_setup_dhcp.rb
/usr/share/YaST2/clients/lan.rb
/usr/share/YaST2/clients/lan_auto.rb
/usr/share/YaST2/clients/lan_export.rb
/usr/share/YaST2/clients/network.rb
/usr/share/YaST2/clients/network_proposal.rb
/usr/share/YaST2/clients/remote.rb
/usr/share/YaST2/clients/remote_proposal.rb
/usr/share/YaST2/clients/routing.rb
/usr/share/YaST2/clients/save_network.rb
/usr/share/YaST2/data
/usr/share/YaST2/data/network
/usr/share/YaST2/data/network/firmwares.yml
/usr/share/YaST2/include
/usr/share/YaST2/include/network
/usr/share/YaST2/include/network/complex.rb
/usr/share/YaST2/include/network/lan
/usr/share/YaST2/include/network/lan/address.rb
/usr/share/YaST2/include/network/lan/cmdline.rb
/usr/share/YaST2/include/network/lan/complex.rb
/usr/share/YaST2/include/network/lan/dhcp.rb
/usr/share/YaST2/include/network/lan/hardware.rb
/usr/share/YaST2/include/network/lan/help.rb
/usr/share/YaST2/include/network/lan/s390.rb
/usr/share/YaST2/include/network/lan/wizards.rb
/usr/share/YaST2/include/network/routines.rb
/usr/share/YaST2/include/network/runtime.rb
/usr/share/YaST2/include/network/services
/usr/share/YaST2/include/network/services/dns.rb
/usr/share/YaST2/include/network/services/host.rb
/usr/share/YaST2/include/network/services/routing.rb
/usr/share/YaST2/include/network/widgets.rb
/usr/share/YaST2/lib
/usr/share/YaST2/lib/cfa
/usr/share/YaST2/lib/cfa/generic_sysconfig.rb
/usr/share/YaST2/lib/cfa/hosts.rb
/usr/share/YaST2/lib/network
/usr/share/YaST2/lib/network/clients
/usr/share/YaST2/lib/network/clients/inst_lan.rb
/usr/share/YaST2/lib/network/clients/inst_setup_dhcp.rb
/usr/share/YaST2/lib/network/clients/network_proposal.rb
/usr/share/YaST2/lib/network/clients/save_network.rb
/usr/share/YaST2/lib/network/confirm_virt_proposal.rb
/usr/share/YaST2/lib/network/install_inf_convertor.rb
/usr/share/YaST2/lib/network/network_autoconfiguration.rb
/usr/share/YaST2/lib/network/network_autoyast.rb
/usr/share/YaST2/lib/network/wicked.rb
/usr/share/YaST2/lib/y2network
/usr/share/YaST2/lib/y2network/autoinst
/usr/share/YaST2/lib/y2network/autoinst/config.rb
/usr/share/YaST2/lib/y2network/autoinst/config_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/dns_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/hostname_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/interfaces_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/routing_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/s390_devices_reader.rb
/usr/share/YaST2/lib/y2network/autoinst/type_detector.rb
/usr/share/YaST2/lib/y2network/autoinst/udev_rules_reader.rb
/usr/share/YaST2/lib/y2network/autoinst_profile
/usr/share/YaST2/lib/y2network/autoinst_profile/dns_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/interface_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/interfaces_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/networking_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/route_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/routing_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/s390_device_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/s390_devices_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/section_with_attributes.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/udev_rule_section.rb
/usr/share/YaST2/lib/y2network/autoinst_profile/udev_rules_section.rb
/usr/share/YaST2/lib/y2network/boot_protocol.rb
/usr/share/YaST2/lib/y2network/can_be_copied.rb
/usr/share/YaST2/lib/y2network/clients
/usr/share/YaST2/lib/y2network/clients/auto.rb
/usr/share/YaST2/lib/y2network/clients/dns.rb
/usr/share/YaST2/lib/y2network/clients/routing.rb
/usr/share/YaST2/lib/y2network/config.rb
/usr/share/YaST2/lib/y2network/config_reader.rb
/usr/share/YaST2/lib/y2network/config_writer.rb
/usr/share/YaST2/lib/y2network/connection_config
/usr/share/YaST2/lib/y2network/connection_config.rb
/usr/share/YaST2/lib/y2network/connection_config/base.rb
/usr/share/YaST2/lib/y2network/connection_config/bonding.rb
/usr/share/YaST2/lib/y2network/connection_config/bridge.rb
/usr/share/YaST2/lib/y2network/connection_config/ctc.rb
/usr/share/YaST2/lib/y2network/connection_config/dummy.rb
/usr/share/YaST2/lib/y2network/connection_config/ethernet.rb
/usr/share/YaST2/lib/y2network/connection_config/hsi.rb
/usr/share/YaST2/lib/y2network/connection_config/infiniband.rb
/usr/share/YaST2/lib/y2network/connection_config/ip_config.rb
/usr/share/YaST2/lib/y2network/connection_config/lcs.rb
/usr/share/YaST2/lib/y2network/connection_config/qeth.rb
/usr/share/YaST2/lib/y2network/connection_config/tap.rb
/usr/share/YaST2/lib/y2network/connection_config/tun.rb
/usr/share/YaST2/lib/y2network/connection_config/usb.rb
/usr/share/YaST2/lib/y2network/connection_config/vlan.rb
/usr/share/YaST2/lib/y2network/connection_config/wireless.rb
/usr/share/YaST2/lib/y2network/connection_configs_collection.rb
/usr/share/YaST2/lib/y2network/dialogs
/usr/share/YaST2/lib/y2network/dialogs/add_interface.rb
/usr/share/YaST2/lib/y2network/dialogs/edit_interface.rb
/usr/share/YaST2/lib/y2network/dialogs/rename_interface.rb
/usr/share/YaST2/lib/y2network/dialogs/route.rb
/usr/share/YaST2/lib/y2network/dialogs/s390_ctc_activation.rb
/usr/share/YaST2/lib/y2network/dialogs/s390_device_activation.rb
/usr/share/YaST2/lib/y2network/dialogs/s390_lcs_activation.rb
/usr/share/YaST2/lib/y2network/dialogs/s390_qeth_activation.rb
/usr/share/YaST2/lib/y2network/dialogs/wireless_expert_settings.rb
/usr/share/YaST2/lib/y2network/dialogs/wireless_wep_keys.rb
/usr/share/YaST2/lib/y2network/dns.rb
/usr/share/YaST2/lib/y2network/driver.rb
/usr/share/YaST2/lib/y2network/hostname.rb
/usr/share/YaST2/lib/y2network/hwinfo.rb
/usr/share/YaST2/lib/y2network/interface.rb
/usr/share/YaST2/lib/y2network/interface_config_builder.rb
/usr/share/YaST2/lib/y2network/interface_config_builders
/usr/share/YaST2/lib/y2network/interface_config_builders/bonding.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/bridge.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/ctc.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/dummy.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/infiniband.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/lcs.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/qeth.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/tap.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/tun.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/vlan.rb
/usr/share/YaST2/lib/y2network/interface_config_builders/wireless.rb
/usr/share/YaST2/lib/y2network/interface_type.rb
/usr/share/YaST2/lib/y2network/interfaces_collection.rb
/usr/share/YaST2/lib/y2network/ip_address.rb
/usr/share/YaST2/lib/y2network/ipoib_mode.rb
/usr/share/YaST2/lib/y2network/ntp_server.rb
/usr/share/YaST2/lib/y2network/physical_interface.rb
/usr/share/YaST2/lib/y2network/presenters
/usr/share/YaST2/lib/y2network/presenters/config_summary.rb
/usr/share/YaST2/lib/y2network/presenters/dns_summary.rb
/usr/share/YaST2/lib/y2network/presenters/interface_status.rb
/usr/share/YaST2/lib/y2network/presenters/interface_summary.rb
/usr/share/YaST2/lib/y2network/presenters/interfaces_summary.rb
/usr/share/YaST2/lib/y2network/presenters/proposal_summary.rb
/usr/share/YaST2/lib/y2network/presenters/routing_summary.rb
/usr/share/YaST2/lib/y2network/presenters/s390_group_device_summary.rb
/usr/share/YaST2/lib/y2network/presenters/summary.rb
/usr/share/YaST2/lib/y2network/proposal_settings.rb
/usr/share/YaST2/lib/y2network/route.rb
/usr/share/YaST2/lib/y2network/routing.rb
/usr/share/YaST2/lib/y2network/routing_table.rb
/usr/share/YaST2/lib/y2network/s390_device_activator.rb
/usr/share/YaST2/lib/y2network/s390_device_activators
/usr/share/YaST2/lib/y2network/s390_device_activators/ctc.rb
/usr/share/YaST2/lib/y2network/s390_device_activators/lcs.rb
/usr/share/YaST2/lib/y2network/s390_device_activators/qeth.rb
/usr/share/YaST2/lib/y2network/s390_group_device.rb
/usr/share/YaST2/lib/y2network/s390_group_devices_collection.rb
/usr/share/YaST2/lib/y2network/sequences
/usr/share/YaST2/lib/y2network/sequences/interface.rb
/usr/share/YaST2/lib/y2network/serializer
/usr/share/YaST2/lib/y2network/serializer/route_sysconfig.rb
/usr/share/YaST2/lib/y2network/startmode.rb
/usr/share/YaST2/lib/y2network/startmodes
/usr/share/YaST2/lib/y2network/startmodes.rb
/usr/share/YaST2/lib/y2network/startmodes/auto.rb
/usr/share/YaST2/lib/y2network/startmodes/hotplug.rb
/usr/share/YaST2/lib/y2network/startmodes/ifplugd.rb
/usr/share/YaST2/lib/y2network/startmodes/manual.rb
/usr/share/YaST2/lib/y2network/startmodes/nfsroot.rb
/usr/share/YaST2/lib/y2network/startmodes/off.rb
/usr/share/YaST2/lib/y2network/sysconfig
/usr/share/YaST2/lib/y2network/sysconfig/config_reader.rb
/usr/share/YaST2/lib/y2network/sysconfig/config_writer.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_reader.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/base.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/bonding.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/bridge.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/ctc.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/dummy.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/ethernet.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/hsi.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/infiniband.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/lcs.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/qeth.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/tap.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/tun.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/usb.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/vlan.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_readers/wireless.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writer.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/base.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/bonding.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/bridge.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/ctc.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/dummy.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/ethernet.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/hsi.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/infiniband.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/lcs.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/qeth.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/tap.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/tun.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/usb.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/vlan.rb
/usr/share/YaST2/lib/y2network/sysconfig/connection_config_writers/wireless.rb
/usr/share/YaST2/lib/y2network/sysconfig/dns_reader.rb
/usr/share/YaST2/lib/y2network/sysconfig/dns_writer.rb
/usr/share/YaST2/lib/y2network/sysconfig/hostname_reader.rb
/usr/share/YaST2/lib/y2network/sysconfig/hostname_writer.rb
/usr/share/YaST2/lib/y2network/sysconfig/interface_file.rb
/usr/share/YaST2/lib/y2network/sysconfig/interfaces_reader.rb
/usr/share/YaST2/lib/y2network/sysconfig/interfaces_writer.rb
/usr/share/YaST2/lib/y2network/sysconfig/routes_file.rb
/usr/share/YaST2/lib/y2network/sysconfig/type_detector.rb
/usr/share/YaST2/lib/y2network/type_detector.rb
/usr/share/YaST2/lib/y2network/udev_rule.rb
/usr/share/YaST2/lib/y2network/udev_rule_part.rb
/usr/share/YaST2/lib/y2network/virtual_interface.rb
/usr/share/YaST2/lib/y2network/virtualization_config.rb
/usr/share/YaST2/lib/y2network/widgets
/usr/share/YaST2/lib/y2network/widgets/add_interface.rb
/usr/share/YaST2/lib/y2network/widgets/additional_addresses.rb
/usr/share/YaST2/lib/y2network/widgets/address_tab.rb
/usr/share/YaST2/lib/y2network/widgets/blink_button.rb
/usr/share/YaST2/lib/y2network/widgets/bond_options.rb
/usr/share/YaST2/lib/y2network/widgets/bond_slave.rb
/usr/share/YaST2/lib/y2network/widgets/bond_slaves_tab.rb
/usr/share/YaST2/lib/y2network/widgets/boot_protocol.rb
/usr/share/YaST2/lib/y2network/widgets/bridge_ports.rb
/usr/share/YaST2/lib/y2network/widgets/bridge_slaves_tab.rb
/usr/share/YaST2/lib/y2network/widgets/client_cert_path.rb
/usr/share/YaST2/lib/y2network/widgets/client_key_path.rb
/usr/share/YaST2/lib/y2network/widgets/delete_interface.rb
/usr/share/YaST2/lib/y2network/widgets/destination.rb
/usr/share/YaST2/lib/y2network/widgets/devices.rb
/usr/share/YaST2/lib/y2network/widgets/driver.rb
/usr/share/YaST2/lib/y2network/widgets/edit_interface.rb
/usr/share/YaST2/lib/y2network/widgets/ethtools_options.rb
/usr/share/YaST2/lib/y2network/widgets/firewall_zone.rb
/usr/share/YaST2/lib/y2network/widgets/gateway.rb
/usr/share/YaST2/lib/y2network/widgets/general_tab.rb
/usr/share/YaST2/lib/y2network/widgets/hardware_tab.rb
/usr/share/YaST2/lib/y2network/widgets/ifplugd_priority.rb
/usr/share/YaST2/lib/y2network/widgets/interface_description.rb
/usr/share/YaST2/lib/y2network/widgets/interface_name.rb
/usr/share/YaST2/lib/y2network/widgets/interface_naming.rb
/usr/share/YaST2/lib/y2network/widgets/interface_type.rb
/usr/share/YaST2/lib/y2network/widgets/interfaces_table.rb
/usr/share/YaST2/lib/y2network/widgets/ip4_forwarding.rb
/usr/share/YaST2/lib/y2network/widgets/ip6_forwarding.rb
/usr/share/YaST2/lib/y2network/widgets/ip_address.rb
/usr/share/YaST2/lib/y2network/widgets/ipoib_mode.rb
/usr/share/YaST2/lib/y2network/widgets/kernel_module.rb
/usr/share/YaST2/lib/y2network/widgets/kernel_options.rb
/usr/share/YaST2/lib/y2network/widgets/mtu.rb
/usr/share/YaST2/lib/y2network/widgets/netmask.rb
/usr/share/YaST2/lib/y2network/widgets/path_widget.rb
/usr/share/YaST2/lib/y2network/widgets/remote_ip.rb
/usr/share/YaST2/lib/y2network/widgets/renaming_mechanism.rb
/usr/share/YaST2/lib/y2network/widgets/route_options.rb
/usr/share/YaST2/lib/y2network/widgets/routing_buttons.rb
/usr/share/YaST2/lib/y2network/widgets/routing_table.rb
/usr/share/YaST2/lib/y2network/widgets/s390_button.rb
/usr/share/YaST2/lib/y2network/widgets/s390_channels.rb
/usr/share/YaST2/lib/y2network/widgets/s390_common.rb
/usr/share/YaST2/lib/y2network/widgets/server_ca_path.rb
/usr/share/YaST2/lib/y2network/widgets/slave_items.rb
/usr/share/YaST2/lib/y2network/widgets/startmode.rb
/usr/share/YaST2/lib/y2network/widgets/tunnel.rb
/usr/share/YaST2/lib/y2network/widgets/udev_rules.rb
/usr/share/YaST2/lib/y2network/widgets/vlan_id.rb
/usr/share/YaST2/lib/y2network/widgets/vlan_interface.rb
/usr/share/YaST2/lib/y2network/widgets/wireless.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_auth.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_auth_mode.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_eap.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_eap_mode.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_essid.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_expert.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_mode.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_password.rb
/usr/share/YaST2/lib/y2network/widgets/wireless_tab.rb
/usr/share/YaST2/lib/y2remote
/usr/share/YaST2/lib/y2remote/clients
/usr/share/YaST2/lib/y2remote/clients/proposal.rb
/usr/share/YaST2/lib/y2remote/dialogs
/usr/share/YaST2/lib/y2remote/dialogs/remote.rb
/usr/share/YaST2/lib/y2remote/display_manager.rb
/usr/share/YaST2/lib/y2remote/modes
/usr/share/YaST2/lib/y2remote/modes.rb
/usr/share/YaST2/lib/y2remote/modes/base.rb
/usr/share/YaST2/lib/y2remote/modes/manager.rb
/usr/share/YaST2/lib/y2remote/modes/socket_based.rb
/usr/share/YaST2/lib/y2remote/modes/vnc.rb
/usr/share/YaST2/lib/y2remote/modes/web.rb
/usr/share/YaST2/lib/y2remote/remote.rb
/usr/share/YaST2/lib/y2remote/widgets
/usr/share/YaST2/lib/y2remote/widgets/remote.rb
/usr/share/YaST2/modules
/usr/share/YaST2/modules/DNS.rb
/usr/share/YaST2/modules/Host.rb
/usr/share/YaST2/modules/Lan.rb
/usr/share/YaST2/modules/LanItems.rb
/usr/share/YaST2/modules/NetHwDetection.rb
/usr/share/YaST2/modules/Routing.rb
/usr/share/YaST2/schema
/usr/share/YaST2/schema/autoyast
/usr/share/YaST2/schema/autoyast/rnc
/usr/share/YaST2/schema/autoyast/rnc/host.rnc
/usr/share/YaST2/schema/autoyast/rnc/networking.rnc
/usr/share/YaST2/scrconf
/usr/share/YaST2/scrconf/cfg_dhcp.scr
/usr/share/YaST2/scrconf/cfg_network.scr
/usr/share/YaST2/scrconf/cfg_udev_persistent.scr
/usr/share/YaST2/scrconf/etc_hosts.scr
/usr/share/YaST2/scrconf/routes.scr
/usr/share/applications/YaST2
/usr/share/applications/YaST2/org.opensuse.yast.Host.desktop
/usr/share/applications/YaST2/org.opensuse.yast.LAN.desktop
/usr/share/applications/YaST2/org.opensuse.yast.Remote.desktop
/usr/share/doc/packages/yast2-network
/usr/share/doc/packages/yast2-network/README.md
/usr/share/icons
/usr/share/icons/hicolor
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
/usr/share/icons/hicolor/scalable/apps/yast-host.svg
/usr/share/icons/hicolor/scalable/apps/yast-lan.svg
/usr/share/icons/hicolor/scalable/apps/yast-remote.svg
/usr/share/licenses/yast2-network
/usr/share/licenses/yast2-network/COPYING
/usr/share/metainfo
/usr/share/metainfo/org.opensuse.yast.Host.metainfo.xml
/usr/share/metainfo/org.opensuse.yast.LAN.metainfo.xml
/usr/share/metainfo/org.opensuse.yast.Remote.metainfo.xml


Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Oct 18 23:47:00 2021