| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: transactional-update-zypp-config | Distribution: openSUSE Leap 15.2 |
| Version: 2.20.3 | Vendor: openSUSE |
| Release: lp152.2.3.1 | Build date: Wed Sep 2 22:49:15 2020 |
| Group: System/Base | Build host: obs-arm-9 |
| Size: 30 | Source RPM: transactional-update-2.20.3-lp152.2.3.1.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: https://github.com/openSUSE/transactional-update | |
| Summary: Zypper rule to prevent uninstallation of transactional-update | |
Adds a zypper rule to prevent accidental uninstallation of transactional-update.
GPL-2.0-or-later
* Tue Aug 18 2020 Ignaz Forster <iforster@suse.com>
- Added 0001-Fix-EFI-grub2.patch:
Backport of upstream fix for [boo#1162320] (grub2-arm64-efi
upgrade 2.02-lp151.21.6.1 -> 2.02-lp151.21.9.1 causes system to
fail reboot with "error: symbol `grub_efi_allocate_any_pages' not
found.")
* Tue Mar 03 2020 Ignaz Forster <iforster@suse.com>
- Update to version 2.20.3
- Reintroduce compatibility with RPM < 4.15 for inclusion in
SLE / Leap 15.2
- Prepare for removal of /var/lib/alternatives [jsc#SLE-9101]
* Wed Feb 26 2020 Ignaz Forster <iforster@suse.com>
- Update to version 2.20.2
- Use full names for zypper options [bsc#1164543]
- Ignore /var/lib/rpm in shadowed file output
- Optimize create-dirs-from-rpmdb
* Tue Jan 07 2020 Ignaz Forster <iforster@suse.com>
- Update to version 2.20.1
- Add missing documentation about --continue option
- Avoid error message about missing fstab file on first snapshot creation.
[boo#1160213]
* Fri Nov 08 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.20
- Add the option `--continue` to extend an existing snapshot. This can be
used to perform multiple operations before rebooting into the new state.
[gh#openSUSE/transactional-update#16]
- Make sure the dracut service to print warnings on /etc overlay conflicts
also runs in the pre-made images.
- Add "none" reboot method
- Remove conflicting overlay artifacts in case an existing overlay directory
will be reused
* Wed Sep 25 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.17
- Provide network in shell on systems where resolv.conf is pointing to /run
directly [boo#1151081]
- Print new snapshot number at the end
- Always mount /root subvolume when using shell command to preserve history
* Mon Sep 09 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.16
- Use default command if options, but no command was given [boo#1146116]
- Make sure only one process appears in `ps` output [boo#1111897]
- Move update check: If a new repository is added (and
ZYPPER_AUTO_IMPORT_KEYS is set) adding the new repository key won't fail
any more
- Avoid unnecessary snapshots / reboots by detecting zypper operations
without changes more reliably (e.g. when installing an already installed
package)
- Update the manpage accordingly
- Bugfixes:
- Ignore commented lines in fstab when checking for shadowed files
- Avoid warning when copying network config
- Remove Perl dependency
- Building documentation requires Python 3 now
* Wed Jun 05 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.15
- Move description of interactiveness [boo#1132438]
- Enable network during update [boo#1137890]
- Add compatibilty with new overlayfs versions [boo#1140057]
- Allow updates of the bootloader on EFI systems [boo#1139015]
- Add support for /boot/writable [boo#1138725]
* Mon Apr 29 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.14.2
- Prevent unnecessary error message on systems not installed with
YaST (e.g. KIWI)
* Wed Apr 17 2019 kukuk@suse.de
- Add requires for bc, needed for some calculations
* Mon Mar 25 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.14.1
- Improve non-root fs changes checker based on feedback
- Disable snapper's zypper plugin during transactional-update run
- Allow parallel installation with snapper's zypper plugin (useful on
read-write systems).
* Fri Mar 15 2019 Ignaz Forster <iforster@suse.com>
- Update to version 2.14
- Warn user if contents of /var have been changed during update
- Noteworthy: swapped position of upperdir and lowerdir in fstab for better
readability
- Major update to the transactional-update guide
* Mon Mar 04 2019 kukuk@suse.de
- Update to version 2.13.2
- add hooks for telemetrics
* Thu Feb 14 2019 iforster@suse.com
- Update to version 2.13.1
- Bugfix: Clean up empty /etc snapshot directories again
- Use official release files from GitHub for building
* Thu Feb 14 2019 iforster@suse.com
- Update to version 2.13
- Fix a serious data loss problem (deleting all files in /etc
overlays) in case /var/lib/overlay/etc is not part of any
snapshot any more.
- Avoid error message in case a system has no /etc/fstab.sys
* Mon Jan 28 2019 iforster@suse.com
- Update to version 2.12
- Implements support for needs-restart (Fate#326451)
- Adds easy rollback to last known working snapshot by using "last"
as the snapshot number
- Migrate /etc/fstab.sys entires to /etc/fstab for systemd being
able to create mount units; this will prevent errors on unmount
- Remove implicit --no-allow-vendor-change - this option can be
configured in zypper's configuration file now
- Add support for mounting the /etc overlay file system as a systemd
unit in /etc/fstab on a read-only system (replacing /etc/fstab.sys
in the long run)
- Various bugfixes:
- Only remove /etc overlays on read-only root file systems
[boo#1122455]
- Disable "Persistent" flag in systemd timer unit to prevent
updates during or immediately after the boot phase
- Don't set global zypper options during migration - this is not
supported by the migration plugin
- Fix error handling when interrupting while rsync is running
- Filter out security.selinux attributes during rsync
* Sat Nov 17 2018 Jan Engelhardt <jengelh@inai.de>
- Use noun phrase in summary.
* Mon Nov 12 2018 iforster@suse.com
- Update to version 2.11
- Update man page to explain new /etc overlay handling
- Add special handling for migrating away from old overlay directory
- Read default update method for systemd service from config file
- Add package "transactional-update-zypp-config" to prevent accidental
transactional-update uninstallation on transactional systems
(boo#1111319)
- Use "up" for systemd service on non-rolling release distributions
(boo#1111321)
* Thu Oct 04 2018 iforster@suse.com
- Update to version 2.10
- Introduce /etc overlays
- Each root file system snapshot now has a dedicated /etc overlay in
/var/lib/snapshots/<snapshot number>/etc
- Changes in older snapshots will be visible in newer snapshots (if
the file hasn't been changed in both snapshots), but not the other
way around; this makes it possible to roll back to a previous
snapshot even if the configuration is broken
- The /etc state of the oldest active snapshot will be synchronized
into the new snapshot to prevent ever growing overlays
- Removed creation of /etc backup snapshots
- Removed complex overlayfs cleanup handling during dracut early boot;
only thing left is to output a warning if files have been changed
in old and new overlay after snapshot creation
- Unused overlays will be removed during "cleanup" operation
- Add compatibility with snapper >= 0.7.0
- Correctly detect BTRFS ID when using multiple snapper configurations
- Fix disappearing prompt in "shell" command when application was updated
- Prevent accidental rollback on fast reboots (boo#1111786)
- Use zypper attribute packages-to-change if available (boo#1105992 &
boo#1097619)
- Add kexec as reboot alternative
- Added explicit --with-doc / --without-doc build configure opttions for
enforcing or excluding documentation build
- Removed precompiled documentation (boo#1088676)
- Added more dependency checks to configure script
- Small improvements to documentation
- Restored compatibility with older rsync versions not supporting the -x
filter
- Small bugfixes for cleanup in error situations
- Fix possible incorrect detection of snapshots numbers during cleanup
- Mention parent in snapshot description
- Add dependencies for documentation build (boo#1088676)
* Mon Aug 20 2018 iforster@suse.com
- Update to version 2.6
- Add --interactive and --non-interactive options to change the default
interactivity for zypper calls. For previously non-interactive calls (e.g.
dup) these options makes it possible to pick the correct solution in case
of conflicts or make sure that a script will never be stuck at an input
prompt.
- Add kured reboot support
- Tries to clean up temporary files and mount points if transactional-update
quits unexpectedly
- Remove trancactional-update-helper (replaced by zypper options)
- Create /var/lib/zypp if not available (boo#1104452)
- Robustify parsing zypper output (boo#1105992)
- Various small fixes
- Changed permissions of systemd script again
* Fri Jun 15 2018 iforster@suse.com
- Update to version 2.5
- Support for overlayfs attributes like trusted.overlay.opaque - this will
avoid disappearing configuration files on system updates
- Documentation update
- Only sync /etc if it's on an overlayfs mount
- Use correct locale for zypper - thus updating locale specific packages and
avoiding "empty" updates where transactional-update didn't see the change
- Add dependency to attr
- Fix permissions of systemd script
* Tue Jun 05 2018 kukuk@suse.de
- Update to version 2.4
- Bug fix release
* Mon May 14 2018 iforster@suse.com
- Update to version 2.3
- Reformat help text / synopsis
- More detailled output (use --quiet for less output)
- Log all error messages into log file
- Avoid potential lock file race condition on self update
- Accept package names with whitespace
- Don't wait for user input during self-update
- Fix broken error message output when creating new snapshot without reboot
- Fix erroneous mounting of stale grub mounts
* Wed May 02 2018 iforster@suse.com
- Update to version 2.2
- Fix security issue in self update [boo#1091316]
- Create dirs in /var more reliably by sorting the list
- Rebuild initrd (needed since 2.0)
* Thu Apr 26 2018 kukuk@suse.de
- Update to version 2.1
- Cleanup the code cleaning up /etc
* Tue Apr 24 2018 kukuk@suse.de
- Update to version 2.0
- Create missing directories from rpm database during boot
- Merge /etc overlay with root subvolume during update
* Fri Apr 20 2018 kukuk@suse.de
- Update to version 1.29
- Implement self-update
- Disable optical media on dup
- Ignore certain zypper return codes
* Tue Apr 03 2018 rbrown@suse.com
- Add conflicts with snapper-zypp-plugin
* Sat Mar 17 2018 rbrown@suse.com
- Require perl-HTML-Parser (needed since 1.26) [boo#1085764]
* Mon Mar 12 2018 kukuk@suse.de
- Update to version 1.28
- Adjust for latest grub2
* Tue Mar 06 2018 kukuk@suse.de
- Update to version 1.27
- Fallback to snapper without dbus support if dbus fails
- Add workaround for update-alternatives
- Add support for /usr/etc/transactional-update.conf
* Fri Feb 23 2018 kukuk@suse.com
- Use %license instead of %doc [bsc#1082318]
* Wed Jan 31 2018 kukuk@suse.de
- Update to version 1.26
- Auto accept repo keys config option
- Detect broken snapshots after abort
- Ignore user deleted snapshots
- Include all error messages in main log file
- Add configuration file
- Correctly implement migration of major OS versions
- Default reboot strategy is configuration option
- Salt option is deprecated
* Tue Jan 09 2018 kukuk@suse.de
- Update to version 1.25
- preliminary SELinux support
- support for seperate /var subvolume
* Tue Dec 05 2017 kukuk@suse.de
- Update to version 1.24
- Don't save unused snapshots if we may delete them again.
Partly fixes [bsc#1071038]
- Copy passwd, group and shadow to /usr/etc if modified
* Fri Nov 17 2017 kukuk@suse.de
- Update to version 1.23
- Fix re-registration in rollback case
- Fix problems with updating the grub2 bootloader
- Add support for migration of products with SCC/SMT
- Re-add support to re-write bootloader
[bsc#1068933]
* Tue Nov 07 2017 kukuk@suse.de
- Update to version 1.22
- Rewrite cleanup code to be more aggressive
* Fri Oct 27 2017 kukuk@suse.de
- Update to version 1.21
- Reset salt grains even if no update was found
* Wed Sep 13 2017 kukuk@suse.de
- Update to version 1.20
- Improve documentation
- Add pkg update option
* Fri Jun 30 2017 kukuk@suse.de
- Update to version 1.19
- Add 'shell' option for debugging and testing
* Wed Jun 28 2017 kukuk@suse.de
- Update to version 1.18
- Auto accept product license in non-interactive mode
* Tue Jun 27 2017 kukuk@suse.de
- Update to version 1.17
- copy modified bootloader config into snapshot
- unit file cleanup, no change of behavior
* Mon Jun 26 2017 kukuk@suse.de
- Update to version 1.16
- internal changes [bsc#1045942]
* Thu Jun 01 2017 kukuk@suse.de
- Update to version 1.15
- Rename option ptf to pkg
- Add option to set salt grains
* Fri Apr 21 2017 kukuk@suse.de
- Update to version 1.14
- Fix check of return values of commands in pipes [bsc#1034900]
* Tue Mar 21 2017 kukuk@suse.de
- Update to version 1.12
- minor bug fixes
* Thu Mar 02 2017 kukuk@suse.de
- Update to version 1.11
- use --no-allow-vendor-change with "zypper dup"
- update manual page
* Mon Feb 13 2017 kukuk@suse.de
- Update to version 1.10
- implement and document rollback option
* Tue Feb 07 2017 kukuk@suse.de
- Update to version 1.9
- fix umounting of special filesystems and subvolumes
- fix interactive installation of PTFs [bsc#1023026]
- fix dependencies of systemd service
* Wed Feb 01 2017 kukuk@suse.de
- Add Requires for lsof and fuser
* Wed Feb 01 2017 kukuk@suse.de
- Update to version 1.8
- fix references in html docu
- build kdump initrd if we build standard initrd, too
* Mon Jan 30 2017 kukuk@suse.de
- Update to version 1.7
- build html docu, too
* Sun Jan 29 2017 kukuk@suse.de
- Update to version 1.6
- Add support for kdump [bsc#1018098]
* Thu Jan 19 2017 kukuk@suse.de
- Update to version 1.5
- Install PTFs in interactive mode
- Sync state file between current and new snapshot
* Tue Jan 17 2017 kukuk@suse.de
- Update to version 1.4
- Fix wrong error messages
- More debug output if umount fails
- Try a second time if umount fails
* Mon Dec 19 2016 kukuk@suse.de
- Update to version 1.3
- Add initrd option
* Thu Dec 15 2016 kukuk@suse.de
- Do some spec file cleanup
* Mon Dec 12 2016 kukuk@suse.de
- Update to version 1.2
- suppport ro-subvolume with overlayfs
* Tue Dec 06 2016 kukuk@suse.de
- Update to version 1.1
- bug fix release
- implement lock
* Wed Nov 23 2016 kukuk@suse.de
- Update to version 1.0
- implement and document PTF options
* Mon Nov 21 2016 kukuk@suse.de
- Update to version 0.99
- Support for rebootmgr
- Write real manual page
* Mon Nov 21 2016 kukuk@suse.de
- Add empty directory
/etc/systemd/system/transactional-update.timer.d/
so to make it easier to override transactional-update.timer
entries.
* Thu Nov 17 2016 kukuk@suse.de
- Update to version 0.90
- Finish normal options
- Implement support for PTFs
* Sun Nov 06 2016 kukuk@suse.com
- Disable restart on update for post install scripts
* Sun Nov 06 2016 kukuk@suse.de
- Implement activating the new snapshot as new root filesystem
* Fri Nov 04 2016 kukuk@suse.de
- Initial version
/etc/zypp/systemCheck.d/transactional-update.check
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Apr 9 14:28:18 2024