|Index||index by Group||index by Distribution||index by Vendor||index by creation date||index by Name||Mirrors||Help||Search|
|Name: bluez-test||Distribution: openSUSE Leap 15.0|
|Version: 5.48||Vendor: openSUSE|
|Release: lp184.108.40.206||Build date: Wed Dec 19 14:18:45 2018|
|Group: Development/Tools/Debuggers||Build host: armbuild04|
|Size: 394130||Source RPM: bluez-5.48-lp220.127.116.11.src.rpm|
|Summary: Tools for testing of various Bluetooth-functions|
Contains a few tools for testing various bluetooth functions. The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A.
GPL-2.0+ and MIT
* Fri Dec 07 2018 Al Cho <email@example.com> - Add hcidump-fixed-hci-frame-dump-stack-buffer-overflow.patch to replace CVE-2016-9800-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch (PATCH-FIX-UPSTREAM)(bsc#1013721)(CVE-2016-9800) Add hcidump-Fix-set_ext_ctrl-global-buffer-overflow.patch to fix global buffer overflow (PATCH-FIX-UPSTREAM) (bsc#1013732)(CVE-2016-9801) - Fix %ifarch range. * Fri Jul 13 2018 firstname.lastname@example.org - add 0001-core-Fixes-order-InterfaceAdded.patch (boo#1101119) to fix headset connect after suspend/resume * Thu Jun 28 2018 email@example.com - Add lost patches for RPi3 bluetooth support (bsc#995059)(bsc#1094902) 0001-rpi3-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch 0002-rpi3-Move-the-43xx-firmware-into-lib-firmware.patch * Fri May 04 2018 firstname.lastname@example.org - Add CVE-2016-9800-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch * Fix hcidump memory leak in pin_code_reply_dump(). (bsc#1013721)(CVE-2016-9800) CVE-2016-9804-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch * Fix hcidump buffer overflow in commands_dump(). (bsc#1013877)(CVE-2016-9804) * Tue Jan 30 2018 email@example.com - Add disable_some_obex_tests.patch bypass boo#1078285 for PowerPC * Fri Dec 29 2017 firstname.lastname@example.org - update to version 5.48: This release brings many fixes and feature enhancements. Some notable enhancements include support for devices with the BLE battery service, as well as improved Mesh support in the meshctl tool. Several previously experimental D-Bus APIs have now been marked as stable, notably the Advertising Manager API as well as the AquireWrite & AquireNotify GATT APIs. As far as fixes go, these can be found in many areas of the stack, including A2DP, AVCTP, device discovery, Mesh, and GATT. * Tue Dec 12 2017 email@example.com - add 0001-obexd-use-AM_LDFLAGS-for-linking.patch - document systemd dependency during %post * Sun Sep 17 2017 firstname.lastname@example.org - update to version 5.47: This release contains various fixes to GATT, A2DP and BR/EDR vs LE bearer handling. There’s also a notable SDP fix for CVE-2017- 1000250 (part of the recently announced BlueBorne vulnerabilities). Feature-wise, there’s now support for adding the appearance and local name to advertising data through the Advertising D-Bus interface. The btmon tool is now also able to better decode most Bluetooth 5.0 HCI commands and events. The Bluetooth Mesh Profile specification was released recently, and this BlueZ release comes with initial support for it in the form of a new meshctl tool. Using this tool it’s possible to provision mesh devices through the GATT Provisioning Bearer (PB-GATT), as well as communicate with them (e.g. configure them) using the GATT Proxy protocol. * Sat Jul 15 2017 email@example.com - update to version 5.46: * Fix issue with handling ATT over BR/EDR connections. * Fix issue with SDP browsing cleanup after connection. * Fix issue with pointer dereference and OPP Put request. * Fix issue with identity address updates during pairing. * Fix issue with not removing services that had disappeared. * Add support for improved discovery of included services. * Add support for simplified characteristics discovery. * Add support for GATT caching configuration option. * Add experimental support for AcquireWrite and AcquireNotify. * Fri Jul 07 2017 firstname.lastname@example.org - enable sixaxis plugin * Sun Jun 25 2017 email@example.com - Add %post/%postun to bluez-auto-enable-devices so the settings change takes effect (boo#1039476) * Thu Jun 08 2017 firstname.lastname@example.org - add bluez-auto-enable-devices subpackage with main.conf which auto-enables all devices (boo#1039476) * Fri May 26 2017 email@example.com - add bluez-5.45-disable-broken-tests.diff to disable two broken tests (reported upstream but not yet fixed) * Sat May 06 2017 firstname.lastname@example.org - update to version 5.45: This is mostly a bugfix release with fixes in ATT, GATT, OBEX and AVDTP. Feature-wise there are some new things as well, such as btmon support decoding Bluetooth 5.0 HCI commands and events. * Fri Mar 03 2017 email@example.com - make testsuite run non-parallel (it has problems with running parallel checks) and quiet * Wed Mar 01 2017 firstname.lastname@example.org - update to version 5.44: Most fixes are LE (specifically GATT) related, however some other areas are affected as well. Feature-wise, there’s a new MIDI plugin and support for using single-mode (LE-only) controllers that lack a public address. E.g. any nRF5x controller running a MyNewt or Zephyr based firmware falls into this category. - packaging: add "--enable-midi", "--enable-deprecated" TODO: package deprecated tools into separate package to prepare removal some time in the future - rebase bluez-cups-libexec.patch * Wed Mar 01 2017 email@example.com - Set the cupsdir directly with patch instead of mv and seds: * bluez-cups-libexec.patch - Replace requirements by the pkgconfig counterparts * this should solve out the problem with builcycle on Factory - Ran over with spec-cleaner * Sat Oct 29 2016 firstname.lastname@example.org - update to version 5.43: This is almost purely a bug-fix release with fixes to HoG, ATT and PAN. There’s also a fix for a regression in 5.42 that caused connection failures for external profiles like OBEX. Feature-wise there’s one notable addition: LE privacy. By enabling this in main.conf it’s now possible to make BlueZ generate a local Identity Resolving Key (IRK) and use Resolvable Private Addresses (RPAs) for itself. * Mon Sep 26 2016 email@example.com - update to version 5.42: The major API change with this release is that the GATT D-Bus API is no longer marked as experimental.This should hopefully encourage the creation of more applications using it. Feature- wise, btmon received support for decoding full mgmt message traces - a feature that is available in the bluetooth-next kernel tree, i.e. on its way to the 4.9 kernel release. In addition to these changes, this release contains also fixes in areas such as PBAP, transport selection (BR/EDR vs LE), ATT and A2DP. * Sun Jul 31 2016 firstname.lastname@example.org - Update descriptions a bit. Adjust RPM groups for what is used in openSUSE normally. Drop archaic %clean section. Drop --with-pic which is only for (unbuilt) static libs. * Wed Jul 20 2016 email@example.com - update to version 5.41: BlueZ 5.41 is purely a bug-fix release targeting areas such as GATT, AVRCP, OBEX and device discovery filters. The GATT D-Bus API is now starting to be stable enough that this will likely be the last release where it is flagged as experimental. - fix build with older distributions that don't have %_userunitdir ins systemd-rpm-macros * Tue Jun 07 2016 firstname.lastname@example.org - Don't require systemd-devel but systemd-rpm-macros (bsc#983167) Bluez simply needs to know where the systemd default paths are, at build time. For that there's no need to build-require systemd or systemd-devel (and pull all theirs dependencies). Instead build-require systemd-rpm-macros, which has much less dependencies. * Sat May 28 2016 email@example.com - update to version 5.40: This is mostly a bug fix release fixing issues with GATT, paired devices and connection handling (particularly for accepting connections through the Profile D-Bus interface). One new feature is the ability to use btmon for reading HCI logs from a TTY device. Right now the creation of this kind of logs is available with Zephyr <https://www.zephyrproject.org/> in the form of a special console logging mode (more information available here https://www.zephyrproject.org/doc/board/arduino_101_ble.html#getting-hci-traces>). The format of the protocol is a slight modification of what btmon normally receives from the kernel monitor sockets, and is documented in doc/btsnoop.txt). * Sun Apr 10 2016 firstname.lastname@example.org - update to version 5.39: This is almost entirely a bug fix release with important fixes to GATT, HoG, AVRCP & A2DP. - install gatttool, needed for bluetooth 4.0 devices (boo#970628) * Fri Mar 18 2016 email@example.com - update to version 5.38: This release has lots of updates and fixes to the GATT D-Bus API. It should be working considerably better now. A key change to the GATT D-Bus API is that it is now fully conforming to the word of the D-Bus Object Manager specification. Instead of registering each service individually with an Object Manager interface per service path, all application services are now grouped together through a single RegisterApplication call. The details can be found in gatt-api.txt. Besides the D-Bus API change there are also numerous fixes to GATT functionality in general. Other areas that received fixes in this release are OBEX, AVRCP and 128-bit UUID handling. Feature-wise there isn’t anything groundbreaking, but a notable update is support for the Start Limited Discovery command in the btmgmt tool (this feature debuted with the 4.5 kernel release). * Fix issue with stack overflow and UUID handling. * Fix issue with ObjectManager interface and GATT. * Fix issue with GATT database and error handling. * Fix issue with GATT client notifications. * Fix issue with GATT object ordering. * Fix issue with GATT default MTU exchange. * Fix issue with device attribute clearing. * Fix issue with AVRCP capabilities request. * Mon Dec 28 2015 firstname.lastname@example.org - update to version 5.37: * Fix issue with registering external profiles. * Fix issue with connecting external profiles. * Fix issue with GATT service changed handling. * Fix issue with not emitting GattServices update. * Convert to unified HID over GATT profile support. * Convert to KeyboardDisplay as default IO capability. * Install btattach utility by default. * Fri Oct 30 2015 email@example.com - update to version 5.36: This release consists for the most part of bug fixes that target areas such as PBAP, AVRCP and GATT. Feature-wise a notable change is btmon support for vendor diagnostic messages which will be debuting with the 4.4 Linux kernel release. This feature will allow e.g. LMP tracing with specific controllers. For now there is preliminary support for Intel and Broadcom based controllers. - update dbus-devel buildrequires from configure.ac - remove obsolete bluez-no-duplicate-test-names.patch * Mon Sep 28 2015 firstname.lastname@example.org - update to version 5.35: This release contains bugfixes to areas such as GATT, OBEX, HoG and AVRCP. From now on bluetoothd will cache more information of remote GATT databases and thereby avoid unnecessary rediscovery of remote services. A noteworthy new feature is the ability to configure bluetoothd to automatically enable (power on) all new adapters. One use of this is to replace unreliable "hciconfig hci0 up" commands that some distributions use in their init/udev scripts. The feature can be enabled by having "AutoEnable=true" under the "[Policy]" section of /etc/bluetooth/main.conf * Thu Sep 10 2015 email@example.com - Add bluez-no-duplicate-test-names.patch: Fix test suite when running against GLIB 2.45.x (test names are not to be used duplicated). * Fri Sep 04 2015 firstname.lastname@example.org - update to version 5.34: This release fixes a fairly important bug for the GATT D-Bus interface where automatic reconnections would not always occur for the client role. There’s also a fix for a missing attribute in PBAP & MAP SDP records as well as a couple of audio related fixes. A new feature in this release is Media Player Selection support for the Target role of AVRCP (the Controller role already had this). * Fri Jul 31 2015 email@example.com - update to version 5.33: This release contains mostly bugfixes, particularly in areas such as the audio plugin, GATT and OBEX. The main feature additions are in the the emulator code which received improvelents to LE features. There’s also a new tool for testing the recently released Eddystone protocol from Google. * Tue Jul 07 2015 firstname.lastname@example.org - update to version 5.32: This is mostly a bug fix release rather than including many new features. The fixes fall in several different areas, including OPP, ATT and advertising (instance number handling in particular). There’s also a fix for handling a sudden disconnect when a connection setup process hasn’t yet completed. The one notable feature this release has is the ability to select between letting the stack handle ATT security elevation or doing the respective error handling in higher layers. * Tue Jun 16 2015 email@example.com - update to version 5.31 Fixes to many different areas, including networking, GATT, HID, A2DP and AVRCP. Feature-wise we’ve got support for security flags for the GATT database, allowing fine-grained security level control for D-Bus clients using the GATT D-Bus API. We’ve also got a new experimental device discovery filter interface which allows filtering for a specific remote service, RSSI threshold or transport (LE vs. BR/EDR). Another new experimental interface is for LE advertising, which also brings the LE peripheral role closer to feature completion on a D-Bus level - remove obsolete bluez-5.30-disable-broken-tests.diff * Wed Apr 01 2015 firstname.lastname@example.org - update to version 5.30 The highlight of this release is the completion of the GATT D-Bus APIs. We’ve now got both the client and server functionality in place, however it’s still behind the -E (--experimental) command line switch. The API is documented in doc/gatt-api.txt and there are several test tools for it in the tree (even bluetoothctl has support for it). Another new (and still experimental) D-Bus API that debuts with this release is one for managing LE Advertising, i.e. acting in peripheral role. The API is documented in doc/advertising-api.txt. Besides the new features, there are several fixes to AVCTP, AVDTP & AVRCP. There’s also a fix for C++ compiler compatibility with the library headers as well as a fix for device information not being stored in certain corner cases. - add bluez-5.30-disable-broken-tests.diff to fix test suite - remove -fstack-reuse=none workaround - remove 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch * Mon Mar 23 2015 email@example.com - Build the testsuite with -fstack-reuse=none to workaround broken test setup. [bnc#923768] * Thu Mar 12 2015 firstname.lastname@example.org - update to version 5.29 This is a comparatively large release with over a month and 475 commits since 5.28. There have been lots of fixes to the Android side. Our internal GATT library (used both by ‘normal’ BlueZ as well as the Android version) received lots of updates for this release. Other notable changes are a fix for AVCTP key repeat timeout as well as added support for the Multi Profile Specification (MPS). - add 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch from bluez-devel for fixing test case failure (will be included in next bluez release) * Tue Feb 03 2015 email@example.com - update to version 5.28 Here’s the first BlueZ release in 2015. Most of the changes since the last one are bug fixes, but there’s actually quite many of them this time, including: * Fixes to GATT service discovery & probing * Fix for bearer selection with dual-mode devices * Fix potential crash when removing devices * Fix issue with incomplete names in EIR data * Fix parsing GATT name characteristics * Fix AVCTP long press & key repetition handling * Fixes for GATT notification handling Besides bug fixes we’ve now also got more extensive unit tests for new GATT code as well as better HCI decoders in btmon for some less used 4.1 and 4.2 features. The hid2hci tool gained support for CSR 8510 A10 devices and the hex2hcd tool received a complete rewrite with better command handling. * Sat Dec 27 2014 firstname.lastname@example.org - update to version 5.27 Here comes the traditional x-mas release! BlueZ 5.27 consists mostly of bug fixes to areas such as GATT and mgmt (the interface through which bluetoothd talks to the kernel). The emulation framework has also received many new features, paving the way for more extensive test automation. * Sun Dec 14 2014 email@example.com - update to version 5.26 This release is for the most part a bug-fix release with fixes in A2DP and OBEX related functionality, but there’s also an added features for get/set reports for HID over GATT as well as Phonebook Access Profile 1.2 support The Bluetooth 4.2 specification went public in early December and BlueZ 5.26 is the first release with support for its features. Perhaps the most notable one of these is Low Energy Secure Connections which will require a 3.19 or newer kernel. This feature brings LE pairing to the same level of security as it has been for BR/EDR. LE SC also brings along with it so-called cross-transport pairing, which means that you only need to pair once over LE or BR/EDR to get the necessary keys for both transports between two dual-mode devices. * Mon Nov 10 2014 firstname.lastname@example.org - update to version 5.25 This release contains various improvements to MAP and PBAP support. There are also various GATT related fixes. We’ve also got a fix for a race condition which could occasionally cause LE connection/pairing failures. The fix will work for kernels from 3.13 onward (for older kernels a proper fix isn’t really feasible). - packaging: remove obsolete README.SUSE and README.packagers * Mon Oct 06 2014 email@example.com - update to version 5.24 This release consists for the most part of cleanups and minor fixes, however there are some new additions too in the form of Phonebook Access Profile 1.2 and Message Access Profile 1.2 features. - packaging: mcaptest tool added to bluez-test package * Tue Sep 09 2014 firstname.lastname@example.org - update to version 5.23 This is mostly a bug-fix release with fixes for concurrent authorization attempts (for untrusted devices), HID, uHID, OBEX, MAP and AVRCP. We now also have better support for AVCTP/AVRCP decoding with btmon. (no other packaging changes besides version bump) * Fri Aug 08 2014 email@example.com - update to version 5.22 This release contains several fixes to HID over GATT (HoG) as well as for AVRCP. Feature-wise there are a couple of notable additions debuting with the Linux kernel 3.17 release: * BR/EDR whitelist support. Starting with Linux kernel 3.17 bluetoothd will no-longer set adapters to connectable by default. Instead, all configured remote devices are added to the kernel whitelist after which the kernel will enable page scanning but only accept connect requests from the whitelist. This effectively reduces the attack surface for unknown devices. When whitelist support is available the general connectable state now follows the discoverable state, meaning discoverable must be enabled for previously unknown devices to be able to connect to us. * Proper LE passive scanning support. For kernels before 3.17 bluetoothd will use the Start/Stop Discovery commands to perform LE background scanning. This however uses LE active scanning which is both wasteful (causing unneeded Scan Requests) and can cause reconnection issues with devices using direct advertising (e.g. most LE mice). From kernel version 3.17 onward bluetoothd will use proper kernel-side passive scanning, making the background scanning both efficient and more interoperable. The kernel will even use the controller-side whitelist during scanning (if no Resolvable Private Addresses are present), saving even more power. * Sun Jul 06 2014 firstname.lastname@example.org - update to version 5.21 Bugfixes and improvements throughout the tree. Fixes to bluetoothctl to allow using it for scripting. An important detail of this release is that it supports several new features that are on their way to the 3.17 kernel. Perhaps the most important one of these is LE passive scanning. When run on a kernel that supports it, instead of doing a kind of "fake" background scanning using the Start Discovery command, bluetoothd will now tell the kernel the relevant information and the kernel will then commence passive scanning for devices. - remove bluez-5.20-fix-queue.patch (fixed upstream) * Fri Jun 27 2014 email@example.com - add bluez-5.20-fix-queue.patch to fix test case failure * Sat Jun 21 2014 firstname.lastname@example.org - update to version 5.20 For non-Android related parts this is mostly a bug-fix release with minor fixes here and there as well as improved handling of PS3 controllers. * Tue May 20 2014 email@example.com - update to version 5.19 The release contains fixes to OBEX, AVRCP browsing, HID over GATT and handling of device unpaired events for dual-mode devices. There is also a fix to cleanly handle tools like bluetoothctl taking over the default agent role. Since there is no indication to the "normal" system default agent this would previously simply rob this property away without any way to know that this happened. From 5.19 onward bluetoothd maintains a stack of agents that have requested to be the default and will hand back the property to the next item in the stack when bluetoothctl (or some other tool) exits. Besides these fixes we’ve got some new additions too: * User space based HID host implementation (for BR/EDR), to complement the kernel-side implementation * A reconnect-upon-linkloss policy for those profiles that need, such as HFP HF or an A2DP Sink. The list of remote UUIDs to try to reconnect to is also configurable through main.conf. - removed bluez-glib2.40.patch, included upstream * Tue Apr 29 2014 firstname.lastname@example.org - Add bluez-glib2.40.patch: Fix build with GLib 2.40: Since GLib 2.39 calling g_source_remove on already removed source is causing critical warning. * Sun Apr 13 2014 email@example.com - update to version 5.18 "This is mostly a bug fix release with issues fixed regarding LE single mode device detection and incorrect getpeername() calls which could have caused incorrect SDP records for profiles (mainly those using the Profile D-Bus interface with RFCOMM channel auto-allocation). On the OBEX side we now have full OBEX authentication support, which is a fairly useless feature in practice but a mandatory one for qualification of some OBEX profiles." * Wed Mar 26 2014 firstname.lastname@example.org - update to version 5.17 "This is mostly a bug fix release with issues fixed in OBEX, dual-mode device pairing, and LE related areas." * Fix issue with not resetting OBEX SRM setup. * Fix issue with BR/EDR devices and auto-connect list. * Fix issue with bonding complete detection as peripheral. * Fix issue with not updating bearer timestamp of connections. * Fix issue with paired property for multiple bearers. * Tue Mar 11 2014 email@example.com - update to version 5.16: * Fix issue with missing paired property notification. * Fix issue with endianess of long term key storage. "People using 5.15 are strongly recommended to upgrade because of these fixes." * Fix issue with HID over GATT physical location. * Fix issue with HID over GATT unique identifier. * Add support for storing signature resolving keys. * Sat Feb 22 2014 firstname.lastname@example.org - update to version 5.15: * Fix issue with LE enabling and background scanning. * Fix issue with HID over GATT input device name. * Fix issue with storage of slave long term keys. * Add support for handling identity resolving keys. * various android features (not relevant for us) - minor specfile tweaks to avoid some rpmlint warnings - permissions of some bluez-test files changes to please rpmlint * Thu Jan 23 2014 email@example.com - Update to version 5.14: * Fix issue with marking PS3 controllers as trusted. * Fix issue with authorization of PS3 controllers. * Add support for DualShock 4 controller detection. * Add support for legacy pairing emulation. * Add support for secure simple pairing emulation. * Add support for automated pairing testing. * Add support for RFCOMM protocol testing. * Add support for HCI controller testing. - Add "bluemoon" configuration tool * Mon Dec 30 2013 firstname.lastname@example.org - Update to version 5.13: * Fix issue with PS3 controller detection. * Add support for data transfers to L2CAP testing tool. * Add support for delay reporting to AVDTP testing tool. * Add support for Android Bluetooth Core interface. * Add support for Android Bluetooth Socket interface. * Add support for Android Bluetooth HID Host interface. * Add support for Android Bluetooth PAN interface. Changes since 5.12: * Fix issue with missing reply to DisconnectProfile. * Fix issue with icon property and class of device changes. * Fix issue with HID devices when SDP record is not available. * Fix issue with handling auto-pairing of printers. * Fix issue with agent authorization handling. * Add support for PS3 controller setup and pairing. * Add support for LE L2CAP CoC test capabilities. * Add support for AVDTP qualification test cases. * Add support for SMP cryptographic test cases. * Wed Dec 04 2013 email@example.com - add bluez-5.11-logitech-hid2hci.patch, (bnc#681049; bnc#850478) * Sun Nov 24 2013 firstname.lastname@example.org - run %uev_rules_update in %post if such macro is defined * Mon Nov 18 2013 email@example.com - update to bluez-5.11: * Fix issue with connection attempt when not powered. * Fix issue with assigning player to AVRCP target role. * Fix issue with OBEX default cache directory. * Fix issue with SDP search error handling. * Fix issue with processing of SDP records. * Fix issue with HID to HCI switching utility. * Fix issue with mgmt end-to-end testing tool. * Fix issue with L2CAP end-to-end testing tool. * Add support for SMP end-to-end testing tool. * Add support for more Wii controllers. * Sat Oct 19 2013 firstname.lastname@example.org - remove libnl BuildRequires, it is not needed * Wed Oct 16 2013 email@example.com - update to bluez-5.10, changelog from source: ver 5.10: * Fix issue with discoverable timeout handling. * Fix issue with MAP messages and record version. * Fix issue with MAP messages and status events. * Fix issue with MAP messages and relative folders. * Fix issue with MAP messages and type property signals. * Fix issue with transfer size for OBEX GET operations. * Fix issue with AVRCP service class identifier. * Fix issue with AVRCP tracking seeked signal. * Add support for OBEX command line client. ver 5.9: * Fix issue with network service and adapter removal. * Fix issue with misleading OBEX error messages. * Fix issue with OBEX transport reference handling. * Fix issue with memory leak with MAP event handler. * Fix issue with missing MAP property changed signal. * Fix issue with message type property values. * Fix issue with empty UUID list for devices. * Fix issue with profile agent cancel method. * Remove dependency on USB library. - removed bluez-5.4-compilerwarning.diff, is obsolete * Tue Oct 08 2013 firstname.lastname@example.org - Do not package systemd user session service file. - Change DBus user service to be self-contained, and not rely on Systemd activation (bnc#842688). * Sat Sep 14 2013 email@example.com - place socket in /run , not /var/run (bluez-sdp-unix-path.patch) * Fri Aug 16 2013 firstname.lastname@example.org - update to bluez-5.8 * changelog is in the package * Thu Aug 15 2013 email@example.com - update to bluez-5.4 Huge, incompatible update. Some points: * hcidump merged * obexd merged * no unix socket anymore (only d-bus) * libbluetooth and bluez-devel is *deprecated* and will be removed. Only included for now to keep the breakage smaller. - dropped patches (no longer needed): * 0001-network-fix-network-Connect-method-parameters.patch * bluez-4.101-new-automake.diff - new patch to suppress a stupid compiler warning: * bluez-5.4-compilerwarning.diff * Wed Aug 14 2013 firstname.lastname@example.org - Disable check when building with qemu (fix armv6) * Thu Mar 21 2013 email@example.com - Added url as source. Please see http://en.opensuse.org/SourceUrls * Thu Feb 28 2013 firstname.lastname@example.org - add bluez-4.101-new-automake.diff, fix build with automake-1.13.1 * Fri Jan 25 2013 email@example.com - also run spec-cleaner on bluez-gstreamer.spec, add README for packagers, fix bluez-gstreamer changelog * Mon Jan 21 2013 firstname.lastname@example.org - Unconditionally enable the systemd bluetooth service (actual activation of bluez is triggered by udev) (bnc#796671). - Run spec-cleaner. * Fri Jan 11 2013 email@example.com - Add changelog entry for older change so factory-auto wont reject this. - This requests removes sbc building and packaging from bluez. SBC recently gets its own package and sources are even stripped out ot Bluez in current git master (future 5.0). On top of that current bluez-devel package conflicts with sbc-devel. Note: This change may broke packages which use sbc from bluez-devel as new sbc-devel package use different include path. This change is required to properly build PulseAudio 3.0 * Wed Oct 31 2012 firstname.lastname@example.org - bluez-coldplug init script is forced but it s not needed when using systemd with dbus activation. * Wed Oct 17 2012 email@example.com - remove unused 001-remove-rule-dell-mouse.patch * Wed Oct 17 2012 firstname.lastname@example.org - Fix build with new systemd / udev location. * Wed Oct 17 2012 email@example.com - Change udev rules location with udev > 190 * Tue Aug 28 2012 firstname.lastname@example.org - enable bluetooth.service on install (bnc#772455) * Sat Jul 28 2012 email@example.com - remove unused service file (now in upstream tarball) * Fri Jul 20 2012 firstname.lastname@example.org - add patch from upstream git to fix bluez networking * Wed Jul 11 2012 email@example.com - remove unused bluetooth.sh, bluez-4.75-udev-use-helperscript.diff * Wed Jun 27 2012 firstname.lastname@example.org - ver 4.101: - Fix issue with missing BlueZ service file. - Fix issue with aborting A2DP setup during AVDTP start. - Fix issue with handling of multiple A2DP indication. - Fix issue with handling AVDTP abort with invalid SEID. - Fix issue with rejecting AVDTP abort commands. - Add support for handling AVDTP command collision. - our bluez-4.100 patches are applied upstream - apitest was removed and is thus no longer in bluez-test * Thu Jun 21 2012 email@example.com - remove obsolete configure options - fix LDFLAGS / "-pie" acinclude.m4 bug * Wed Jun 20 2012 firstname.lastname@example.org - update to bluez-4.100: * Fix issue with crashing when SCO connection fails. * Fix issue with HFP gateway failing on first GSM connection. * Fix issue with AVRCP and handling of vendor commands. * Fix issue with handling AVRCP subunit info command. * Fix issue with missing capability for AVRCP track reached end. * Fix issue with AVDTP signaling and GStreamer SBC NULL check. * Fix issue with AVDTP Reconfigure Reject message. * Fix issue with incorrect EIR length parsing. * Fix issue with SDP disconnect for HIDSDPDisable. * Fix issue with SDP interoperability with Mac OS X Lion. * Fix issue with reverse SDP discovery with some devices. * Fix issue with discovering state during power off operation. * Add support for AVRCP Volume Changed notifications. * Add support for AVRCP Set Absolute Volume handling. * Add support for display legacy PIN code agent method. * Add support for multiple media transports per endpoint. * Add support for discovering device information characteristics. * Add support for vendor source for Device ID setting. * Add support for immediate alert server. * Add support for link loss server. - Notes: * This version requires D-Bus 1.4 or later. * This version requires GLib 2.28 or later. * Thu Apr 26 2012 email@example.com - fix mysterious build failure by creating /var/lib/bluetooth * Wed Apr 18 2012 firstname.lastname@example.org - Make libsbc installable; Required by update to Opal. * Thu Mar 08 2012 email@example.com - update to bluez-4.99: - Fix issue with missing retries for BNEP connection setup. - Fix issue with not showing name if first EIR has no details. - Fix issue with running SDP discovery for LE devices. - Add support for GATT using 128-bit Bluetooth UUIDs. - Add support for retrieving key size information. - Add support for storing Long Term Keys. - Add support for Proximity Reporter API. - Add support for KeyboardDisplay IO capability. - Add support for version 1.0 of management API. - Add support for monitoring interface. * Mon Jan 23 2012 firstname.lastname@example.org - update to bluez-4.98: - Fix issue with adapter list upon initialization failure. - Fix issue with missing legacy property for Low Energy. - Fix issue with missing EIR information handling. - Fix issue with device address type tracking. - Fix issue with alert level characteristic. - Fix issue with headset shutdown handling. - Fix issue with Wiimote address handling. - Add support for advanced l2test options. - Add support for attribute protocol and multiple adapters. * Tue Dec 27 2011 email@example.com - update to bluez-4.97: - Update support for proximity profile. - Fix issue with SBC audio decoding quality. - Fix multiple issues with HFP support. - Fix multiple issues with A2DP support. - Fix multiple issues with AVDTP support. - Fix multiple issues with AVRCP support. - Add support for AVRCP meta-data transfer. - Add support for Bluetooth based thermometers. - add %check section to .spec - there is now a unittest * Tue Dec 20 2011 firstname.lastname@example.org - kernel.org currently lacks of bluez tarballs - Fix build failures due to lack of autotools * Fri Dec 16 2011 email@example.com - Fix systemd units installation. * Wed Nov 16 2011 firstname.lastname@example.org - require pkgconfig(libnl-1) instead of libnl-1_1-devel * Fri Sep 16 2011 email@example.com - Select libnl-1_1-devel - Fix baselibs.conf to produce right package * Thu Aug 04 2011 firstname.lastname@example.org - update to bluez-4.96: - Fix issue with race condition in AVDTP stream start. - Fix issue with global adapter offline switching. - Fix issue with pairing and No Bonding devices. - Add support for Nintendo Wii Remote pairing. - enable proximity, wiimote, thermometer plugins * Tue Jul 05 2011 email@example.com - update to bluez-4.95: - Fix issue with AVCTP replies with invalid PID. - Fix issue with AVRCP and unknown packet types. - Fix issue with AVRCP not using NOT_IMPLEMENTED correctly. - Fix issue with AVDTP discovery if all endpoints are in use. - Fix issue with invalid memory writes and media support. - Fix issue with not removing device alias and unbonding. - Fix issue with device disconnects and offline mode handling. - Add support for setting adapter name based on machine-info. - Add support for systemd service configuration. - add systemd .service file (systemd support needs more work still) * Wed Jun 22 2011 firstname.lastname@example.org - added baselibs.conf bnc#700840 * Tue Jun 14 2011 email@example.com - remove workaround for rpmlint stupidity now that libusb is in / * Wed Jun 01 2011 firstname.lastname@example.org - update to bluez-4.94: - Fix issue with invalid read of memory in various modules. - Fix issue with buffer overflow when sending AVDTP commands. - Fix issue with response to vendor dependent AVRCP commands. - Fix issue with headset when not able to reply with ERROR. - Fix issue with crash when creating a device from storage. - Fix issue with handling non UTF-8 devices names. - Add support for improved discovery procedure. * Wed May 04 2011 email@example.com - update to bluez-4.93: - Fix issue with property type and Health Main channel. - Fix issue with crash when removing devices. - Add support for hid2hci and udev integration. - disable 001-remove-rule-dell-mouse.patch for now * Tue Apr 26 2011 firstname.lastname@example.org - update to bluez-4.92: - Fix issue with handling of A2DP suspend response. - Fix issue with crashing when acquiring A2DP stream. - Fix issue with missing check for valid SCO before shutdown. - Fix issue with waiting for POLLERR when disconnecting SCO. - Fix issue with disconnect after primary service discovery. - Fix issue with attribute interface registration. - Add support for primary services over BR/EDR. - Add support for flushable packets of A2DP media. * Wed Mar 30 2011 email@example.com - update to bluez-4.91: - Fix issue with LMP version string and hciconfig. - Fix issue with missing discovery signal when scanning. - Fix issue with wrong state and canceling name resolving. - Fix issue with missing check during adapter initialization. - Fix issue with missing protocol not supported error and A2DP. - Fix issue with crash during driver unregistering and A2DP. - Fix issue with crash when receiving AVDTP close command. - Fix issue with remote SEP handling when A2DP codec changes. - Fix issue with SCO hangup handling and state changes. - Fix issue with security level and MCAP instances. - Fix issue with memory leak and HDP data channels. - Add support for discover characteristics by UUID to gatttool. - Add initial support for Out-of-Band association model. - Add initial support for SIM Access Profile. * Fri Mar 18 2011 firstname.lastname@example.org - update to bluez-4.90: - Fix issue with setting of global mode property. - Fix issue with handling of RequestSession responses. - Fix issue with TP_BNEP_CTRL_BV_01_C qualification test. - Fix issue with too short AVDTP request timeout. - Add support for SIM Access Profile manager. - Add support for new UUID utility functions. - Add support for attribute server notifications. - Add support for client characteristic configuration. - Update support for interactive GATT utility. * Mon Feb 21 2011 email@example.com - update to bluez-4.89: - Fix issue with name resolving when discovery is suspended. - Fix issue with parsing flags of advertising report. - Fix issue with SEP handling if interface is disabled. - Fix issue with device object creation on disconnect event. - Fix issue with indicators whenever the driver is initialized. - Fix issue with call indicator when parsing call info reply. - Fix issue with crash and allowed GATT MTU was too large. - Add support for SDP record of Primary GATT services. - Add support for interactive mode for GATT utility. - gattool requires libreadline for its interactive mode now, so add readline-devel to BuildRequires * Mon Feb 14 2011 firstname.lastname@example.org - update to bluez-4.88: - Fix issue with HID channel reference count handling. - Fix issue with daemon exit on badly formatted AT+VTS. - Fix issue with crash while parsing of endpoint properties. - Fix issue with possible crash on AVDTP Suspend request timeout. - Fix issue with stopping inquiry before adapter is initialized. - Fix issue with creating device object when connection fails. - Fix issue with sending HCIDEVUP when adapter is already up. - Fix issue with handling bonding IO channel closing. - Fix agent cancellation in security mode 3 situations. - Update pairing code to support management interface. - requires glib2 2.16 or newer * Wed Jan 26 2011 email@example.com - update to bluez-4.87 - Fix issue with initialization when adapter is already up. - Fix issue with attribute server MTU and incoming connections. - Fix issue with duplicate characteristics after discovery. * Thu Jan 20 2011 firstname.lastname@example.org - update to bluez-4.86: - Revert wrong fix for SDP PDU size error response. - Fix various memory leaks in A2DP and AVDTP support. - Add Routing property to MediaTransport interface - Add proper tracking mechanism to NREC status. - Add READ_BLOB_REQUEST support to attribute server. * Tue Jan 11 2011 email@example.com - update to bluez-4.85: - Fix issue with event mask setting for older adapters. - Fix issue with device creation and pairing failures. - Add support for telephony support via oFono. - Add support for characteristic security level. - Update support for service registration. * Tue Dec 28 2010 firstname.lastname@example.org - update to bluez-4.84: - Fix issue with wrong parameters and device found signals. - Fix issue with leaking EIR data if RSSI does not change. - Fix issue with adapter initialization state. - Fix issue with closing of SDP server sockets. * Mon Dec 27 2010 email@example.com - update to bluez-4.83: - Fix issue with already connected HFP/HSP endpoints. - Fix missing reply when create device is canceled. - Fix memory leak within the attribute server. - Fix memory leak with unused extended inquiry name. - Fix setting paired state when device->authr is false. - Fix clearing authentication request for renewed keys. - Add support for storing link keys in runtime memory. - Update support for primary service discovery. * Sat Dec 18 2010 firstname.lastname@example.org - update to bluez-4.82: - Fix crash with mmap of files with multiples of page size. - Fix HFP response and hold (AT+BTRH) command response. - Fix device creation error response when powered off. - Fix device removal when connecting/browsing fails. - Add initial attribute permission implementation. - Add AVDTP SRC stream send buffer size verification. - Add support for setting link policy based on features. * Tue Nov 30 2010 email@example.com - update to bluez-4.81: - Fix issue with telephony driver initialization. - Fix issue with adapter services list initialization. - Fix crash after simultaneous authentication requests. - Add support for primary service search on device creation. * Sun Nov 21 2010 firstname.lastname@example.org - update to bluez-4.80: - Fix legacy link key storing for some buggy adapters. - Fix invalid memory access when EIR field length is zero. - Fix adapter initialization to wait for kernel HCI commands. - Fix initialization of adapters which are already up. - Fix possible race condition when initializing adapters. - Fix possible crashes when attempting to connect AVDTP. - Fix not aborting sink stream configuration on disconnect. - Fix not indicating disconnected state when connecting to AVDTP. - Fix not dropping AVDTP session when canceling stream setup. - Fix AVDTP abort not being send when the state is idle. - Fix regression with Low Energy and interleave discovery. - Add a new configuration option to disable Low Energy support. - Update support for GATT Primary Service Discovery. - Update MCAP and HDP support. - disable silent buildrules * Tue Nov 09 2010 email@example.com - update to bluez-4.79: - Fix issue with adapter initialization race condition. - Update new Bluetooth Management interface support. * Mon Nov 08 2010 firstname.lastname@example.org - patch to current git to fix race condition in hciops causing adapter detection to fail * Sun Nov 07 2010 email@example.com - update to bluez-4.78: - Fix various issues with AVDTP timer handling. - Fix various issues with handling of mode changes. - Fix issue with audio disconnect watch in connecting state. - Fix issue with handling call waiting indicators in telephony. - Fix issue with handling UUID parameter and RegisterEndpoint. - Add initial support for Bluetooth Management interface. - Add support for Application property to HealthChannel. * Sun Oct 31 2010 firstname.lastname@example.org - Use %_smp_mflags * Wed Oct 27 2010 email@example.com - update to bluez-4.77: - Fix issue with device name and accessing already freed memory. - Fix issue with handling CHLD=0 command for handsfree. - Fix issue with manager properties and no adapters. - Fix issue with properties and broken service records. - Fix issue with A2DP playback and sample rate changes. - Update MCAP and HDP support. * Fri Oct 15 2010 firstname.lastname@example.org - update to bluez-4.76: - Fix issue in telephony driver with hanging up held call. - Fix issue in telephony driver with notifications when on hold. - Fix issue with blocking on setconf confirmation callback. - Fix issue with not always signaling new streams as sinks. - Fix issue with errors in case of endpoint request timeout. - Fix issue with HFP/HSP microphone and speaker gain values. - Add source if the device attempt to configure local sink stream. - Add PSM option for GATT/ATT over BR/EDR on gatttool. - Add support for GATT/ATT Attribute Write Request. - Update MCAP and HDP support. * Tue Oct 05 2010 email@example.com - de-fuzz udev rule patch * Tue Oct 05 2010 firstname.lastname@example.org - update to bluez-4.75: - Fix use of uninitialized variable on legacy pairing. - Fix mismatch of attribute protocol opcode. - bluez-4.74: - Fix regression for Legacy Pairing. - Fix wrong PSM value for attribute protocol. - Fix issue with RSSI field in advertising reports. - Add support for Add BR/EDR and LE interleaved discovery. - Add support for GATT write characteristic value option. - Add support for specifying download address for AR300x. - bluez-4.73: - Fix problem with EIR data when setting the name. - Fix reading local name from command complete event. - Fix registering local endpoints with disabled socket interface. - Add support for more HCI operations using ops infrastructure. - Add support for GATT characteristic hierarchy. - Add support for GATT indications. * Sat Sep 25 2010 email@example.com - disable libcap-ng for < 11.3, it is not available there - fix up bluez-gstreamer.spec to build with the same options as bluez.spec * Thu Sep 23 2010 firstname.lastname@example.org - enable libcap-ng support so the deamon can drop root privileges * Wed Sep 22 2010 email@example.com - update to bluez-4.72: - Fix memory leak while connecting BTIO channels. - Fix crash with GStreamer plugin if SBC is not supported. - Fix issue with GATT server stop sending notifications. - Fix issue with GATT and dealing with the minimum MTU size. - Fix issue with file descriptor leak in GATT client. - Add support for UUID 128-bit handling in attribute client. - Add support for encoders/decoders for MTU Exchange. - Add support for the MTU Exchange procedure to the server. - Add support for a per channel MTU to the ATT server. - Add support for Characteristic interface. - Add support for new Media API and framework. - Add initial support for HDP plugin. * Thu Sep 09 2010 firstname.lastname@example.org - update to bluez-4.71: - Fix crash with RequestSession and application disconnects. - Fix memory leak and possible crash when removing audio device. - Fix issue with closing stream of locked sep when reconfiguring. - Fix issue where discovery could interfere with bonding. - Fix issue with Connected status when PS3 BD remote connects. - Fix issue with lifetime of fake input devices. - Add support for compile time option of oui.txt path. - Add support for printing IEEE1284 device ID for CUPS. - Add plugin for setting adapter class via DMI. - Add more features for attribute protocol and profile. - Add initial support for MCAP. * Thu Aug 26 2010 email@example.com - update to bluez-4.70: - Fix incoming call indication handling when in WAITING state. - Fix various SDP related qualification test case issues. - Fix logic to write EIR when SDP records are changed. - Fix UTF-8 validity check for remote names in EIR. - Add support for UUID-128 extended inquiry response. - Add service UUIDs from EIR to the DeviceFound signal. - Add fast connectable feature for Handsfree profile. - Add HCI command and event definitions for AMP support. - Add firmware download support for Qualcommh devices. - Add host level support for Atheros AR300x device. - Add initial support of ATT and GATT for basic rate. - ALSA config file moved from /etc/alsa/ to /usr/share/alsa/ * Wed Jul 14 2010 firstname.lastname@example.org - update to bluez-4.69: - Fix issue with calling g_option_context_free() twice. - Fix inconsistencies with initial LE commands and events. - Add support for telephony ClearLastNumber method. - Add support for network server interface. * Tue Jul 13 2010 email@example.com - fix instant segfault of bluetoothd (upstream commit 86b16d8a63d8d6191533418dd1c38ce35c3fbf0a) * Tue Jul 13 2010 firstname.lastname@example.org - update to bluez-4.68: - Fix initialization of adapters in RAW mode. - Add initial set of LE commands and events definitions. - Add mode option for L2CAP sockets to the BtIO API. * Sat Jul 03 2010 email@example.com - update to bluez-4.67: - Fix issue with authentication reply when bonding already completed. - Fix issue with not canceling authentication when bonding fails. - Fix issue with changed combination keys and temporary storage. - Fix issue with sdp_get_supp_feat library function. - Fix issue with missing unblock on device removal. - Fix issue with not waiting for mode change completion. - Add ARMv6 optimized version of analysis filter for SBC encoder. * Sun Jun 13 2010 firstname.lastname@example.org - update to bluez-4.66: - Fix regression with full debug enabling via SIGUSR2. - Fix redundant speaker/microphone gains being sent. - Fix not emitting PropertyChanged for SpeakerGain/MicrophoneGain. - Fix issue with storage usage when a record is not found in memory. - Fix issue with DiscoverServices not retrieving any records. - Fix audio profile disconnection order to match whitepaper. - Fix auto-accept confirmation when local agent has NoInputNoOutput. - Fix remote just-works SSP when MITM protection is required. - Fix performing dedicated bonding without MITM requirement. - Add support for storing debug link keys in runtime memory. * Mon May 24 2010 email@example.com - update to bluez-4.65: - Fix issues with general bonding being default setting now. - Fix driver removal upon device removal. - Add new "Blocked" property to device objects. - Add hciconfig support for blacklisting. - Add support for dynamic debug feature. * Wed May 05 2010 firstname.lastname@example.org - fix coldplug script for udev > 151 (bnc#602773) * Thu Apr 29 2010 email@example.com - update to bluez-4.64: - Fix invalid memory access in headset_get_nrec function. - Fix issue with disconnect event on higher protocol layers. - Fix issue with list parsing in sdp_set_supp_features function. - Fix device object reference counting for SDP browse requests. - Add missing memory checks whenever memory is allocated for SDP. - Add support for exporting local services via D-Bus. - Add more L2CAP Enhanced Retransmission test options. - remove unused "--enable-manpages" configure option * Wed Apr 14 2010 firstname.lastname@example.org - In openSUSE 11.3 there is upstream compliant CUPS 1.4 which means to have a fixed "/usr/lib/cups/" directory on all platforms (see Novell/Suse Bugzilla bnc#575544). * Fri Mar 26 2010 email@example.com - update to bluez-4.63: - Fix avdtp_abort not canceling pending requests. - Fix stale connection when abort gets rejected. * Sun Mar 07 2010 firstname.lastname@example.org - update to bluez-4.62: - Fix accidental symbol breakage with inquiry transmit power. - Fix using invalid data from previous headset connection. - Fix double free on AVDTP Abort response. - Fix possible crash while verifying AVDTP version. - Fix missing inuse flag when AVDTP stream is configured. - Add support for Bluetooth controller types. * Sat Feb 13 2010 email@example.com - update to bluez-4.61: - Fix issues with Read Inquiry Response Transmit Power Level. - Fix possible invalid read when removing a temporary device. - Fix mode restoration when remember_powered is false. - Fix conference call releasing in telephony-maemo. - Fix segmentation fault with authorization during headset disconnects. - Add support for handling unanswered AVDTP request on disconnect. - Add support for handling Inquiry Response Transmit Power Level. - Add support for caching of remote host features. - Add preliminary voice dialing support for HSP. * Mon Jan 11 2010 firstname.lastname@example.org - update to bluez-4.60: * Fix voice mailbox number reading from SIM. * Fix some races with D-Bus mainloop integration. * Add helpers for D-Bus signal watches. * Tue Dec 29 2009 email@example.com - update to bluez-4.59: - Add values for Bluetooth 4.0 specification. - Add SDP functions for HDP support. - Add test scripts for input and audio. - Fix missing close on BtIO create_io function. - Fix sending incorrect AVDTP commands after timeout occurs. - Fix timer removal when device disconnects unexpectedly. - Fix Extended Inquiry Response record for Device ID. - silence rpmlint warning on bluez-coldplug init script * Mon Nov 16 2009 firstname.lastname@example.org - update to bluez-4.58: - Fix crash when adapter agent exists during authentication. - Fix CK-20W quirks for play and pause events. * Mon Nov 02 2009 email@example.com - update to bluez-4.57: - Fix unloading of drivers for uninitialized adapters. - Fix debug message to use requested and not opened SEID. - Fix codec selection for GStreamer plugin. - Fix deleting of SDP records during service updates. - Fix deleting of SDP records when a device is removed. - Fix handling when the SDP record is modified on remote device. - Fix potential buffer overflow by using snprintf instead of sprintf. - Fix const declarations for some storage function parameters. * Mon Oct 19 2009 firstname.lastname@example.org - 001-remove-rule-dell-mouse.patch added to disable udev action for dell mouse; bnc#522287 * Sat Oct 10 2009 email@example.com - update to bluez-4.56: - Add missing values from Bluetooth 3.0 specification. - Add proper tracking of device paired status. - Fix tracking of devices without permanently stored link key. - Fix issue with link key removal after connection failures. - Fix legacy pairing information based on remote host features. - Fix off-by-one issue with AVDTP capability parsing. - Fix AVRCP, AVCTP, AVDTP, A2DP and HFP version numbers. - Fix agent canceling before calling agent_destroy. - Fix service record parsing with an empty UUID list. - Fix various SDP related memory leaks. * Sun Oct 04 2009 firstname.lastname@example.org - fix reading of config file in udev helper script - update to bluez-4.55: - Add support for POSIX capabilities dropping. - Add special quirk for the Nokia CK-20W car kit. - Fix error code handling for AVDTP SetConfiguration response. - Fix updating out of range list when RSSI hasn't changed. - Fix various memory leaks and unnecessary error checks. ver 4.54: - Add introspection interface to output of introspection calls. - Fix stream handling when media transport disconnects prematurely. - Fix command timeout handling when there's no stream. - Fix headset_suspend_stream behavior for invalid states - Fix issue with AVDTP ABORTING state transition. - Fix issue with AVDTP suspend while closing. ver 4.53: - Fix issue with telephony connection state notifications. - Fix AVDTP stream leak for invalid media transport config. - Fix audio connection authorization handling with timeouts. - Fix race condition in authorizing audio connections. - Fix device authorized setting for AVRCP-only connections. - Fix duplicate attempts from device to connect signal channel. ver 4.52: - Add AVCTP support to test utility. - Fix AVDTP Abort when transport closes before response. - Fix authorization when the audio profiles are slow to connect. - Fix potential AVDTP reference leaks. * Thu Sep 03 2009 email@example.com - update to bluez-4.51: - Add utility for basic AVDTP testing. - Add support for configuring L2CAP FCS option. - Fix discovery mode for CUPS 1.4.x and later. - Fix global state tracking of audio service. - Fix last issues with the new build system. * Tue Aug 25 2009 firstname.lastname@example.org - update to bluez-4.50: - Fix various build issues * Mon Aug 24 2009 email@example.com - update to bluez-4.49: - Add simple test program for basic GAP testing. - Add support for confirmation requests to agent example. - Add support for full non-recursive build. - Add five millisecond delay for Simple Pairing auto-accept. - Fix Class of Device setting when InitiallyPowered=false. * Sat Aug 22 2009 firstname.lastname@example.org - fix init script LSB tags * Thu Aug 20 2009 email@example.com - try to fix enablement of the coldplug init script * Wed Aug 19 2009 firstname.lastname@example.org - add init script so that coldplugging works again (bnc#527856) * Mon Aug 17 2009 email@example.com - update to bluez-4.48: - Add library function for comparing UUID values. - Add support for creating all plugins as builtins. - Add support for async handling of service class changes. - Add support for source interface to audio IPC. - Fix device name settings when device is off or down. - Fix issue with enabled SCO server when not necessary. - Fix missing D-Bus access policy for CUPS backend. - Fix discovery results of CUPS backend. - Fix initialization handling of Maemo telephony. * Mon Aug 03 2009 firstname.lastname@example.org - update to bluez-4.47: - Add support for RFKILL unblock handling. - Add support for serial proxy configurations. - Add support for caching service class updates. - Fix issues with updating SDP service records. - Fix usage of limited discoverable mode. - Remove deprecated methods and signals for AudioSource. - bluez-4.46: - Add support for A2DP sink role. - Fix clearing svc_cache before the adapter is up. - Fix various pointer after free usages. - Fix various memory leaks. * Thu Jul 09 2009 email@example.com - packaging: remove unused bluetooth.rules file (thanks darix!) * Tue Jul 07 2009 firstname.lastname@example.org - update to bluez-4.45: - Fix UDEV_DATADIR fallback if pkg-config fails. - Fix adapter cleanup and setup prototypes. - Fix double-free with out-of-range devices. - Fix inband ring setting to be per-headset. - Fix handling of Maemo CSD startup. * Tue Jul 07 2009 email@example.com - update to bluez-4.44: - Add some missing manual pages. - Fix three-way calling indicator order. - Fix downgrade/upgrade of callheld indicator. - Fix +CIEV sending when indicator value changes. - Fix signal handling for Maemo telephony driver. - Fix parsing issues with messages from Maemo CSD. - Fix issue with duplicate active calls. - udev rules moved to /lib/udev/rules.d * Fri Jul 03 2009 firstname.lastname@example.org - update to bluez-4.43: - Add support for udev based on-demand startup. - Fix verbose error reporting of CUPS backend. - Fix various string length issues. - Fix issues with Maemo telephony driver. - Fix another device setup and temporary flag issue. - Fix and update example agent implementation. - remove init scripts and D-Bus activation, instead bluetoothd is now started by udev. Update README.SUSE accordingly. * Mon Jun 22 2009 email@example.com - fixed build with --as-needed * Sun Jun 21 2009 firstname.lastname@example.org - update to bluez-4.42: This is the release that should contain fixes found during interoperability testing: - Add TI WL1271 to Texas Instruments chip list. - Add special udev mode to bluetoothd. - Fix regression when there is no agent registered. - Fix error return when bonding socket hang up. - Fix SCO server socket for HFP handsfree role. - Fix shutdown on SCO socket before closing. - Fix shutdown on A2DP audio stream channel before closing. - Fix issue with asserting on AVDTP reference count bugs. - Fix authorization denied issue with certain headsets. - Fix AVRCP UNITINFO and SUBUNIT INFO responses. - Fix discovery cancel issues in case SDP discovery fails. * Sun Jun 07 2009 email@example.com - update to bluez-4.41: - Fix pairing even if the ACL gets dropped before successful SDP. - Fix regression which caused device to be removed after pairing. - Fix HSP record fetching when remote device doesn't support it. - Fix SDP discovery canceling when clearing hs->pending. - Fix headset never connecting on the first attempt. - Fix headset state tracking if bt_search_service() fails. - Fix maximum headset connection count check. - Fix AVDTP Discover timeout handling. - Fix also UI_SET_KEYBIT for the new pause and play key codes. - packaging: - add simple-agent, simple-service and test-network to bluez-test * Wed May 20 2009 firstname.lastname@example.org - update to bluez-4.40: - Add telephony driver for oFono telephony stack. - Add support for Dell specific HID proxy switching. - Add support for running hid2hci from udev. - Add mapping for AVRCP Play and Pause to dedicated key codes. - Fix AVRCP keycodes to better match existing X keymap support. - Fix various quoting issues within telephony support. - Fix memory allocation issue when generating PDUs for SDP. - Fix race condition on device removal. - Fix non-cancelable issue with CreateDevice method. - Fix non-working CancelDiscovery method call. * Mon May 11 2009 email@example.com - update to bluez-4.39: - Add workaround for dealing with unknown inquiry complete. - Fix discovering when using software scheduler. - Fix wrong NoInputNoOutput IO capability string. - Fix race condition with agent during pairing. - Fix agent cancellation for security mode 3 acceptor failure. - Fix temporary flag removal when device creation fails. - Fix hciattach to use ppoll instead of poll. - Fix service class update when adapter is down. - Fix service classes race condition during startup. - Fix release of audio client before freeing the device. * Mon May 04 2009 firstname.lastname@example.org - update to bluez-4.38: - Add support for builtin plugins. - Add framework for adapter operations. - Add constants for Enhanced Retransmission modes. - Fix HCI socket leak in device_remove_bonding. - Fix various format string issues. - Fix crashes with various free functions. - Fix issues with Headset and A2DP drivers to load again. - Fix sending AVRCP button released passthrough messages - Fix bug which prevent input devices to work after restart. - Fix issue with interpretation of UUID-128 as channel. * Thu Apr 23 2009 email@example.com - update to bluez-4.37: - Add version value for Bluetooth 3.0 devices. - Add additional L2CAP extended feature mask bits. - Add support for loading plugins in priority order. - Add support for more detailed usage of disconnect watches. - Add support for AVRCP volume control. - Add saturated clipping of SBC decoder output to 16-bit. - Fix potentially infinite recursion of adapter_up. - Fix SCO handling in the case of an incoming call. - Fix input service to use confirm callback. - Fix cleanup of temporary device entries from storage. * Sun Apr 19 2009 firstname.lastname@example.org - update to bluez-4.36: - Add proper tracking of AVCTP connect attempts. - Add support to channel pattern in Serial interface. - Fix A2DP sink crash if removing device while connecting. - Fix error handling if HFP indicators aren't initialized. - Fix segfault while handling an incoming SCO connection. - Fix Serial.Disconnect to abort connection attempt. * Sun Apr 12 2009 email@example.com - update to bluez-4.35: - Add support for Handsfree profile headset role. - Add additional checks for open SEIDs from clients. - Fix device removal while audio IPC client is connected. - Fix device removal when an authorization request is pending. - Fix incoming AVDTP connect while authorization in progress. - Fix disconnection timers for audio support. - Fix various potential NULL pointer deferences. - Fix callheld indicator value for multiple calls. - Fix voice number type usage. - Fix GDBus watch handling. - add an explicit requires: for the exact libbluetooth3 version to the bluez package. Fixes the problem that it was possible to install a newer bluez package without updating the libraries * Tue Mar 31 2009 firstname.lastname@example.org - update to bluez-4.34: - Add support for version checks of plugins. - Add support for class property on adapter interface. - Add support for second SDP attempt after connection reset. - Add support for more detailed audio states. - Add support for HFP+A2DP auto connection feature. - Add support for new and improved audio IPC. - Add program for testing audio IPC interface. - Fix various AVDTP qualification related issues. - Fix broken SDP AttributeIdList parsing. - Fix invalid memory access of SDP URL handling. - Fix local class of device race conditions. - Fix issue with periodic inquiry on startup. - Fix missing temporary devices in some situations. - Fix SBC alignment issue for encoding with four subbands. * Tue Mar 17 2009 email@example.com - update to bluez-4.33: - Add Paired property to the DeviceFound signals. - Add support for Headset profile 1.2 version. - Fix broken network configuration when IPv6 is disabled. - Fix network regression that caused disconnection. - Fix SDP truncation of strings with NULL values. - Fix service discovery handling of CUPS helper. * Mon Mar 09 2009 firstname.lastname@example.org - renamed modprobe config to /etc/modprobe.d/50-bluetooth.conf (required by new module-init-tools). * Mon Mar 02 2009 email@example.com - update to bluez-4.32: - Fix broken SDP record handling. - Fix SDP data buffer parsing. - Fix more SDP memory leaks. - Fix read scan enable calls. - Fix A2DP stream handling.
/usr/bin/l2test /usr/bin/rctest /usr/lib/bluez /usr/lib/bluez/test /usr/lib/bluez/test/bluezutils.py /usr/lib/bluez/test/dbusdef.py /usr/lib/bluez/test/example-advertisement /usr/lib/bluez/test/example-gatt-client /usr/lib/bluez/test/example-gatt-server /usr/lib/bluez/test/ftp-client /usr/lib/bluez/test/list-devices /usr/lib/bluez/test/map-client /usr/lib/bluez/test/monitor-bluetooth /usr/lib/bluez/test/opp-client /usr/lib/bluez/test/pbap-client /usr/lib/bluez/test/sap_client.py /usr/lib/bluez/test/service-did.xml /usr/lib/bluez/test/service-ftp.xml /usr/lib/bluez/test/service-opp.xml /usr/lib/bluez/test/service-record.dtd /usr/lib/bluez/test/service-spp.xml /usr/lib/bluez/test/simple-agent /usr/lib/bluez/test/simple-endpoint /usr/lib/bluez/test/simple-player /usr/lib/bluez/test/test-adapter /usr/lib/bluez/test/test-device /usr/lib/bluez/test/test-discovery /usr/lib/bluez/test/test-gatt-profile /usr/lib/bluez/test/test-health /usr/lib/bluez/test/test-health-sink /usr/lib/bluez/test/test-hfp /usr/lib/bluez/test/test-manager /usr/lib/bluez/test/test-nap /usr/lib/bluez/test/test-network /usr/lib/bluez/test/test-profile /usr/lib/bluez/test/test-sap-server
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Apr 9 12:22:27 2022