| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: wavemon | Distribution: openSUSE:Factory:zSystems |
| Version: 0.9.6 | Vendor: openSUSE |
| Release: 1.1 | Build date: Sat Jul 13 20:39:06 2024 |
| Group: Productivity/Networking/Diagnostic | Build host: reproducible |
| Size: 179219 | Source RPM: wavemon-0.9.6-1.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://github.com/uoaerg/wavemon | |
| Summary: An ncurses monitoring application for wireless network devices | |
wavemon is a wireless device monitoring application that allows you to watch signal and noise levels, packet statistics, device configuration and network parameters of your wireless network hardware. It has currently only been tested with the Lucent Orinoco series of cards, although it *should* work (though with varying features) with all devices supported by the wireless kernel extensions by Jean Tourrilhes.
GPL-2.0-or-later
* Sat Jul 13 2024 Martin Hauke <mardnh@gmx.de>
- Update to version 0.9.6
Enhancements and Fixes
* Info Screen:
+ Fix hanging receive by switching to non-blocking netlink
socket.
Miscellaneous
* Bump autoconf minimum version to 2.7.1.
* Wed Nov 01 2023 Martin Hauke <mardnh@gmx.de>
- Update to version 0.9.5
Enhancements and Fixes:
* Info Screen:
+ improve format of percentages (use fixed format rather than
auto-format).
Configuration:
+ fix ncurses support for white backgrounds.
+ configuration file now either in
$XDG_CONFIG_HOME/wavemon/wavemonrc or in
$HOME/.config/wavemon/wavemonrc
Miscellaneous
* avoid including include linux/if.h
* check and set support for C99 standard
* configuration file can now be located in XDG_CONFIG_HOME
* added portable implementation of asprintf(3),
* updated copied nl80211 header file,
* make -Wpedantic the default when building.
* Sun Dec 25 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 0.9.4
Enhancements and Fixes:
* Info Screen
+ fix mis-spelled format identifier
+ add fields for carrier / link mode,
+ handle (accidentally) positive signal levels
+ fix display of bonded interfaces
+ add more network information
+ add IPv6 support
+ use error-checking mutexes
+ display MCS bitrate information
* Scan Screen
+ do not enable scan if rfkill is enabled
+ unblock data mutex at end (fixing a deadlock condition)
+ reset filter when there are no results
* History Screen
+ deprecate threshold actions (were not of much use)
+ remove support for noise levels
+ add missing #include
+ add wide-character support
+ reset data when switching between interfaces
* Menu Bar
+ improve highlighting of selected entries
Miscellaneous:
* drop dependency on wireless extensions
* build uses correct ncurses flags
* build now uses -Wextra by default
* build now honours configure CFLAGS
* update README
* document how to use wavemon within screen
* list of wireless interfaces is now also populated via
nl80211 (no longer ioctl)
* Sat Dec 26 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 0.9.3
Fixes General
* proper rendering on UTF-8 terminals (#70),
* enabled by using libncursesw in place of libncurses,
* and using wide-characters for rendering where supported.
Fixes Info Screen:
* properly clear area when updating with new data,
* do not leave rx / tx empty when no data available (use 'n/a'
instead),
* improve rendering on some terminal types (e.g. ansi),
* refresh immediately after a window-size change;
Fixes History Screen:
* do not display noise / SNR levels when such data is not
reported by the driver;
Fixes Scan Screen:
* fix segmentation fault when no CAP_NET_ADMIN permissions
* fix locking bug (#78), redoing the original and incorrect fix;
* as a result, screen now retains data when switching windows;
Fixes Conf Screen:
* fix memory leak identified in #73,
* reorganize into sections via separators.
Miscellaneous
* Keyboard shortcuts: can now use 0..9 in place of F10, F1..F9;
* Scan screen: increased the usable window size by 1 line;
* Build: updated several outdated build/bootstrap files.
* Sat Oct 24 2020 Martin Hauke <mardnh@gmx.de>
- Update to versino 0.9.2
General
* proper rendering on UTF-8 terminals (#70),
* enabled by using libncursesw in place of libncurses,
* and using wide-characters for rendering where supported.
Info Screen:
* properly clear area when updating with new data,
* do not leave rx / tx empty when no data available (use 'n/a'
instead),
* improve rendering on some terminal types (e.g. ansi),
* refresh immediately after a window-size change;
History Screen:
* do not display noise / SNR levels when such data is not
reported by the driver;
Scan Screen:
* fix segmentation fault when no CAP_NET_ADMIN permissions,
* fix locking bug (#78), redoing the original and incorrect fix
(#42),
as a result, screen now retains data when switching windows;
Conf Screen:
* fix memory leak identified in #73,
* reorganize into sections via separators.
Miscellaneous
* Keyboard shortcuts: can now use 0..9 in place of F10,
F1..F9 (#76);
* Scan screen: increased the usable window size by 1 line;
* Build: updated several outdated build/bootstrap files.
* Mon Mar 16 2020 Martin Pluskal <mpluskal@suse.com>
- Clean up spec file with spec-cleaner
* Mon Dec 30 2019 Martin Hauke <mardnh@gmx.de>
- Update to version 0.9.1
Fixes
* Compatibility:
- replace non-portable on_exit with portable at_exit
- address gcc8 compiler warnings;
* Scan Screen:
- fix memory leak in scan handler
* Info Screen:
- fix logic around uninitialized variable
* Configuration Screen:
- fix numerical key issue on ARM 32bit (Raspberri Pi 2)
* Sat May 18 2019 Martin Hauke <mardnh@gmx.de>
- Update to version 0.9.0
General
* wavemon now has a transparent background.
Fixes
* Info Screen:
- disable locale to avoid funny thousand separators
- prefer station signal over average station signal
* Scan Screen:
- fix bug in displaying TLV elements
- restore interface state on exit
Miscellaneous
* more fixes for reproducible builds - time/date display is gone
* various code updates (new nl80211.h) and clean-ups.
* Sun Feb 18 2018 mardnh@gmx.de
- Remove patch:
* reproducible.patch (fixed upstream)
- Update to version 0.8.2
* Fixes
- Info Screen:
+ do not warn about missing data if driver returns 0
signal value (#44),
+ present retry/drop rate also as percentage (#38),
+ remove outdated WEP encryption key information (#8);
- Scan Screen:
+ revise and improve access to thread data (#42).
* Miscellaneous
- build process now sorts input files for reproducible builds
- miscellaneous fixes, such as typos, email information
- code clean-up
* Tue May 23 2017 bwiedemann@suse.com
- Override BUILD_DATE for reproducible builds
- Add reproducible.patch to avoid random link order
/usr/bin/wavemon /usr/share/doc/packages/wavemon /usr/share/doc/packages/wavemon/LICENSE /usr/share/doc/packages/wavemon/README.md /usr/share/licenses/wavemon /usr/share/licenses/wavemon/LICENSE /usr/share/man/man1/wavemon.1.gz /usr/share/man/man5/wavemonrc.5.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Thu Nov 7 00:51:36 2024