Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

libopenssl1_1-1.1.1s-2.1 RPM for ppc64

From OpenSuSE Ports Tumbleweed for ppc64

Name: libopenssl1_1 Distribution: openSUSE Tumbleweed
Version: 1.1.1s Vendor: openSUSE
Release: 2.1 Build date: Sun Dec 18 17:23:20 2022
Group: Productivity/Networking/Security Build host: obs-power8-03
Size: 4894209 Source RPM: openssl-1_1-1.1.1s-2.1.src.rpm
Summary: Secure Sockets and Transport Layer Security
OpenSSL is a software library to be used in applications that need to
secure communications over computer networks against eavesdropping or
need to ascertain the identity of the party at the other end.
OpenSSL contains an implementation of the SSL and TLS protocols.






* Wed Dec 14 2022 Otto Hollmann <>
  - POWER10 performance enhancements for cryptography [jsc#PED-512]
    * openssl-1_1-AES-GCM-performance-optimzation-with-stitched-method.patch
    * openssl-1_1-Fixed-counter-overflow.patch
    * openssl-1_1-chacha20-performance-optimizations-for-ppc64le-with-.patch
    * openssl-1_1-Fixed-conditional-statement-testing-64-and-256-bytes.patch
    * openssl-1_1-Fix-AES-GCM-on-Power-8-CPUs.patch
* Wed Nov 02 2022 Otto Hollmann <>
  - Updated openssl.keyring with key A21FAB74B0088AA361152586B8EF1A6BA9DA2D5C
  - Update to 1.1.1s:
    * Fixed a regression introduced in 1.1.1r version not refreshing the
      certificate data to be signed before signing the certificate.
  - Update to 1.1.1r:
    * Fixed the linux-mips64 Configure target which was missing the
      SIXTY_FOUR_BIT bn_ops flag. This was causing heap corruption on that
    * Fixed a strict aliasing problem in bn_nist. Clang-14 optimisation was
      causing incorrect results in some cases as a result.
    * Fixed SSL_pending() and SSL_has_pending() with DTLS which were failing to
      report correct results in some cases
    * Fixed a regression introduced in 1.1.1o for re-signing certificates with
      different key sizes
    * Added the loongarch64 target
    * Fixed a DRBG seed propagation thread safety issue
    * Fixed a memory leak in tls13_generate_secret
    * Fixed reported performance degradation on aarch64. Restored the
      implementation prior to commit 2621751 ("aes/asm/ avoid
      32-bit lane assignment in CTR mode") for 64bit targets only, since it is
      reportedly 2-17% slower and the silicon errata only affects 32bit targets.
      The new algorithm is still used for 32 bit targets.
    * Added a missing header for memcmp that caused compilation failure on some
* Sat Sep 24 2022 Jason Sikes <>
  - Added openssl-1_1-paramgen-default_to_rfc7919.patch
    * bsc#1180995
    * Default to RFC7919 groups when generating ECDH parameters
      using 'genpkey' or 'dhparam' in FIPS mode.
* Thu Jul 07 2022 Jason Sikes <>
  - update to 1.1.1q:
    * [CVE-2022-2097, bsc#1201099]
    * Addresses situations where AES OCB fails to encrypt some bytes
* Tue Jun 28 2022 Andreas Schwab <>
  - openssl-riscv64-config.patch: backport of riscv64 config support
* Thu Jun 23 2022 Jason Sikes <>
  - Update to 1.1.1p:
    * bsc#1185637 - updated certificates required for testing that failed
      when date is later than 1 June 2022
    - removed openssl-update_expired_certificates.patch
    * [bsc#1200550, CVE-2022-2068] - more shell code injection issues in c_rehash
* Thu Jun 02 2022 Jason Sikes <>
  - Update to 1.1.1o: [CVE-2022-1292, bsc#1199166]
    * Fixed a bug in the c_rehash script which was not properly sanitising
      shell metacharacters to prevent command injection.
    * Rebased openssl-s390x-assembly-pack-add-OPENSSL_s390xcap-environment.patch
    * Rebased openssl-s390x-assembly-pack-add-support-for-pcc-and-kma-inst.patch
  - Added openssl-update_expired_certificates.patch
    * Openssl failed tests because of expired certificates.
    * bsc#1185637
    * Sourced from
* Tue Mar 15 2022 Pedro Monreal <>
  - Update to 1.1.1n: [bsc#1196877, CVE-2022-0778]
    * Security fix [CVE-2022-0778]: Infinite loop for non-prime moduli
      in BN_mod_sqrt() reachable when parsing certificates.
    * Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK
      (RFC 5489) to the list of ciphersuites providing Perfect Forward
      Secrecy as required by SECLEVEL >= 3.
    * Rebase openssl-1.1.1-fips.patch openssl-1.1.1-evp-kdf.patch
* Fri Mar 04 2022 Pedro Monreal <>
  - Security fix: [bsc#1192820, CVE-2002-20001]
    * Fix DHEATER: The Diffie-Hellman Key Agreement Protocol allows
      remote attackers (from the client side) to send arbitrary
      numbers that are actually not public keys, and trigger
      expensive server-side DHE calculation.
    * Stop recommending the DHE in SSL_DEFAULT_SUSE_CIPHER_LIST
    * Rebase openssl-DEFAULT_SUSE_cipher.patch
* Tue Feb 22 2022 Pedro Monreal <>
  - Fix the engines section in /etc/ssl/openssl.cnf [bsc#1194187]
    * In an INI-type file, the sections begin with a [section_name]
      and they run until the next section begins.
    * Rebase openssl-1_1-use-include-directive.patch
* Fri Feb 11 2022 Pedro Monreal <>
  - Pull libopenssl-1_1 when updating openssl-1_1 with the same
    version. [bsc#1195792]
* Fri Feb 04 2022 Pedro Monreal <>
  - FIPS: Fix function and reason error codes [bsc#1182959]
    * Add openssl-1_1-FIPS-fix-error-reason-codes.patch
* Thu Feb 03 2022 Pedro Monreal <>
  - Enable zlib compression support [bsc#1195149]
* Fri Jan 28 2022 Pedro Monreal <>
  - Backport cryptographic improvements from OpenSSL 3 [jsc#SLE-19742]
    * Optimize RSA on armv8: openssl-1_1-Optimize-RSA-armv8.patch
    * Optimize AES-XTS mode for aarch64:
    * Optimize AES-GCM for uarchs with unroll and new instructions:
* Fri Jan 28 2022 Pedro Monreal <>
  - POWER10 performance enhancements for cryptography [jsc#SLE-18136]
    * openssl-1_1-Optimize-ppc64.patch
* Tue Dec 28 2021 Pedro Monreal <>
  - Update to 1.1.1m:
    * Avoid loading of a dynamic engine twice.
    * Prioritise DANE TLSA issuer certs over peer certs
  - Rebased patches:
    * openssl-1.1.1-evp-kdf.patch
    * openssl-1.1.1-system-cipherlist.patch
* Mon Dec 06 2021 Mark Post <>
  - Added openssl-1_1-use-include-directive.patch so that the default
    /etc/ssl/openssl.cnf file will include any configuration files that
    other packages might place into /etc/ssl/engines.d/ and
    /etc/ssl/engdef.d/ This is a fix for bsc#1004463 where scripting was
    being used to modify the openssl.cnf file. The scripting would fail
    if either the default openssl.cnf file, or the sample openssl-ibmca
    configuration file would be changed by upstream.
  - Updated spec file to create the two new necessary directores for
    the above patch.
* Thu Nov 11 2021 Giuliano Belinassi <>
  - Add support for livepatches (jsc#SLE-20049).
  - Generate ipa-clones tarball artifact when livepatching is enabled.
* Tue Nov 02 2021 Andreas Schneider <>
  - Add missing libopenssl1_1-hmac 32bit package
* Mon Nov 01 2021 Dan Čermák <>
  - Drop openssl-no-date.patch
    Upstream added support for reproducible builds via SOURCE_DATE_EPOCH in
    thereby making this patch obsolete as builds *should* still be reproducible.
* Mon Sep 27 2021 Pedro Monreal <>
  - Enforce crypto-policies for the upcoming Leap 15.4 and SLE 15-SP4
* Tue Aug 24 2021 Pedro Monreal <>
  - Update to 1.1.1l:
    * [bsc#1189520, CVE-2021-3711] Fixed an SM2 Decryption Buffer Overflow.
    * [bsc#1189521, CVE-2021-3712] Fixed various read buffer overruns
      processing ASN.1 strings
* Wed Jul 28 2021 Pedro Monreal <>
  - Require the crypto-policies package from libopenssl-1_1
* Mon May 17 2021 Jason Sikes <>
  - Added openssl-add_rfc3526_rfc7919.patch
    * Genpkey: "-pkeyopt dh_param:" can now choose modp_* (rfc3526)
      and ffdhe* (rfc7919) groups. Example:
      $ openssl genpkey -genparam -algorithm DH -pkeyopt dh_param:ffdhe4096
    * DH_new_by_nid(), DH_get_nid(), and EVP_PKEY_CTX_set_dh_nid():
      NID_modp_* groups are now available, similar to NID_ffdhe*.
    * Fixes bsc#1180995 - openssl s_server fails when FIPS is enabled
* Thu Mar 25 2021 Jason Sikes <>
  - Update to 1.1.1k
    * Fixed a problem with verifying a certificate chain when using
      the X509_V_FLAG_X509_STRICT flag. This flag enables additional
      security checks of the certificates present in a certificate
      chain. It is not set by default. ([CVE-2021-3450])
    * Fixed an issue where an OpenSSL TLS server may crash if sent a
      maliciously crafted renegotiation ClientHello message from a
      client. If a TLSv1.2 renegotiation ClientHello omits the
      signature_algorithms extension (where it was present in the
      initial ClientHello), but includes a signature_algorithms_cert
      extension then a NULL pointer dereference will result, leading
      to a crash and a denial of service attack.
      A server is only vulnerable if it has TLSv1.2 and renegotiation
      enabled (which is the default configuration). OpenSSL TLS
      clients are not impacted by this issue. ([CVE-2021-3449])
* Tue Mar 02 2021 Pedro Monreal <>
  - Fix unresolved error codes [bsc#1182959]
  - Update patches:
    * openssl-1.1.1-fips.patch
    * openssl-1.1.1-evp-kdf.patch
* Fri Feb 19 2021 Pedro Monreal <>
  - Update to 1.1.1j
    * Fixed the X509_issuer_and_serial_hash() function. It attempts
      to create a unique hash value based on the issuer and serial
      number data contained within an X509 certificate. However it
      was failing to correctly handle any errors that may occur
      while parsing the issuer field [bsc#1182331, CVE-2021-23841]
    * Fixed the RSA_padding_check_SSLv23() function and the
      RSA_SSLV23_PADDING padding mode to correctly check for
      rollback attacks.
    * Fixed the EVP_CipherUpdate, EVP_EncryptUpdate and
      EVP_DecryptUpdate functions. Previously they could overflow the
      output length argument in some cases where the input length is
      close to the maximum permissable length for an integer on the
      platform. In such cases the return value from the function call
      would be 1 (indicating success), but the output length value
      would be negative. This could cause applications to behave
      incorrectly or crash. [bsc#1182333, CVE-2021-23840]
    * Fixed SRP_Calc_client_key so that it runs in constant time.
      The previous implementation called BN_mod_exp without setting
      BN_FLG_CONSTTIME. This could be exploited in a side channel
      attack to recover the password. Since the attack is local host
      only this is outside of the current OpenSSL threat model and
      therefore no CVE is assigned.
  - Rebase patches:
    * openssl-1.1.1-fips.patch
    * openssl-1.1.0-issuer-hash.patch
    * openssl-1.1.1-evp-kdf.patch
* Sat Feb 06 2021 Jason Sikes <>
  - Removed patch because it was causing problems with other servers.
    * openssl-zero-pad-DHE-public-key.patch
    * bsc#1181796
* Thu Feb 04 2021 Jason Sikes <>
  - Zero pad the DHE public key in ClientKeyExchange for interoperability with
    Windows Server 2019.
    * openssl-zero-pad-DHE-public-key.patch
    * bsc#1181796
    * sourced from
* Fri Jan 22 2021 Pedro Monreal <>
  - Add version guards for the crypto-policies
* Wed Jan 20 2021 Pedro Monreal <>
  - Disable test_srp subsection from 90-test_sslapi.t test
  - Use SECLEVEL 2 in 80-test_ssl_new.t
  - Add patches:
    * openssl-1_1-use-seclevel2-in-tests.patch
    * openssl-1_1-disable-test_srp-sslapi.patch
* Fri Jan 08 2021 Pedro Monreal <>
  - Allow SHA1 in SECLEVEL 2 in non-FIPS mode
  - Add openssl-1_1-seclevel.patch
* Thu Dec 17 2020 Pedro Monreal <> 
  - Require the crypto-policies package [bsc#1180051]
* Tue Dec 08 2020 Vítězslav Čížek <>
  - Update to 1.1.1i (bsc#1179491)
    * Fixed NULL pointer deref in GENERAL_NAME_cmp (CVE-2020-1971)
  - Refresh openssl-1.1.1-fips-post-rand.patch
* Thu Nov 19 2020 Vítězslav Čížek <>
  - Use the centralized crypto policy profile (jsc#SLE-15832)
    * add openssl-1.1.1-system-cipherlist.patch from Fedora
* Mon Oct 12 2020 Dominique Leuenberger <>
  - Escape rpm command %%expand when used in comment.
* Tue Sep 22 2020 Vítězslav Čížek <>
  - Update to 1.1.1h
    * Disallow explicit curve parameters in verifications chains when X509_V_FLAG_X509_STRICT is used
    * Enable 'MinProtocol' and 'MaxProtocol' to configure both TLS and DTLS contexts
  - refresh openssl-fips_selftest_upstream_drbg.patch
    * DRBG internals got renamed back:
      reseed_gen_counter  -> generate_counter
      reseed_prop_counter -> reseed_counter
* Fri May 15 2020 Vítězslav Čížek <>
  - Limit the DRBG selftests to not deplete entropy (bsc#1165274)
    * fixes also Firefox crashing with Kerberos (bsc#1167132)
    * update openssl-fips_selftest_upstream_drbg.patch
* Tue Apr 21 2020 Vítězslav Čížek <>
  - Update to 1.1.1g
    * Fixed segmentation fault in SSL_check_chain (CVE-2020-1967, bsc#1169407)
      Server or client applications that call the SSL_check_chain() function
      during or after a TLS 1.3 handshake may crash due to a NULL pointer
      dereference as a result of incorrect handling of the
      "signature_algorithms_cert" TLS extension. The crash occurs if an invalid
      or unrecognised signature algorithm is received from the peer. This could
      be exploited by a malicious peer in a Denial of Service attack.
    * Added AES consttime code for no-asm configurations
      an optional constant time support for AES was added
      when building openssl for no-asm.
  - refresh patches:
    * openssl-1.1.1-fips.patch
    * openssl-1.1.1-fips-crng-test.patch
* Tue Mar 31 2020 Vítězslav Čížek <>
  - Update to 1.1.1f
    * Revert the unexpected EOF reporting via SSL_ERROR_SSL
  - refresh openssl-1.1.0-no-html.patch
* Fri Mar 20 2020 Vítězslav Čížek <>
  - Update to 1.1.1e
    * Properly detect EOF while reading in libssl. Previously if we hit an EOF
      while reading in libssl then we would report an error back to the
      application (SSL_ERROR_SYSCALL) but errno would be 0. We now add
      an error to the stack (which means we instead return SSL_ERROR_SSL) and
      therefore give a hint as to what went wrong.
    * Check that ed25519 and ed448 are allowed by the security level. Previously
      signature algorithms not using an MD were not being checked that they were
      allowed by the security level.
    * Fixed SSL_get_servername() behaviour. The behaviour of SSL_get_servername()
      was not quite right. The behaviour was not consistent between resumption
      and normal handshakes, and also not quite consistent with historical
      behaviour. The behaviour in various scenarios has been clarified and
      it has been updated to make it match historical behaviour as closely as
    * Corrected the documentation of the return values from the EVP_DigestSign*
      set of functions.  The documentation mentioned negative values for some
      errors, but this was never the case, so the mention of negative values
      was removed.
    * Added a new method to gather entropy on VMS, based on SYS$GET_ENTROPY.
      The presence of this system service is determined at run-time.
    * Added newline escaping functionality to a filename when using openssl dgst.
      This output format is to replicate the output format found in the '*sum'
      checksum programs. This aims to preserve backward compatibility.
    * Print all values for a PKCS#12 attribute with 'openssl pkcs12', not just
      the first value.
  - Update bunch of patches as the internal crypto headers got reorganized
  - drop openssl-1_1-CVE-2019-1551.patch (upstream)
* Fri Mar 20 2020 Vítězslav Čížek <>
  - openssl dgst: default to SHA256 only when called without a digest,
    not when it couldn't be found (bsc#1166189)
    * add openssl-unknown_dgst.patch
* Wed Mar 04 2020 Vítězslav Čížek <>
  - Limit the DRBG selftests to not deplete entropy (bsc#1165274)
    * update openssl-fips_selftest_upstream_drbg.patch
* Wed Feb 26 2020 Vítězslav Čížek <>
  - Run FIPS DRBG selftests against the crypto/rand DRBG implementation
    * add openssl-fips_selftest_upstream_drbg.patch
* Fri Feb 21 2020 Vítězslav Čížek <>
  - Use the newly build libcrypto shared library when computing the hmac
    checksums in order to avoid a bootstrapping issue by BuildRequiring
    libopenssl1_1 (bsc#1164102)
* Thu Feb 20 2020 Vítězslav Čížek <>
  - Fix wrong return values of FIPS DSA and ECDH selftests (bsc#1163569)
    * add openssl-fips_fix_selftests_return_value.patch
* Tue Feb 18 2020 Jason Sikes <>
  - Added SHA3 FIPS self-tests bsc#1155345
    * openssl-fips-add-SHA3-selftest.patch
* Tue Jan 28 2020 Pedro Monreal Gonzalez <>
  - Support for CPACF enhancements - part 2 (crypto) [jsc#SLE-7403]
  - Add patches:
    * openssl-s390x-assembly-pack-accelerate-X25519-X448-Ed25519-and-Ed448.patch
    * openssl-s390x-fix-x448-and-x448-test-vector-ctime-for-x25519-and-x448.patch
* Thu Jan 23 2020 Vítězslav Čížek <>
  - Temporarily ignore broken OPENSSL_INIT_NO_ATEXIT due to our
    layered FIPS initialization (bsc#1161789)
    * openssl-fips-ignore_broken_atexit_test.patch
* Wed Jan 22 2020 Vítězslav Čížek <>
  - Import FIPS patches from SLE-15
    * openssl-fips-dont_run_FIPS_module_installed.patch
    * openssl-fips_mode.patch
    * openssl-ship_fips_standalone_hmac.patch
    * openssl-fips-clearerror.patch
    * openssl-fips-selftests_in_nonfips_mode.patch
* Tue Jan 21 2020 Vítězslav Čížek <>
  - Don't run FIPS power-up self-tests when the checksum files aren't
    installed (bsc#1042392)
    * add openssl-fips-run_selftests_only_when_module_is_complete.patch
* Tue Jan 21 2020 Vítězslav Čížek <>
  - Import FIPS patches from Fedora (bsc#1157702, jsc#SLE-9553)
    * openssl-1.1.1-fips-crng-test.patch
    * openssl-1.1.1-fips-post-rand.patch
    * openssl-1.1.1-fips.patch
    * openssl-1.1.0-issuer-hash.patch
    * openssl-1.1.1-evp-kdf.patch
    * openssl-1.1.1-ssh-kdf.patch replaces openssl-jsc-SLE-8789-backport_KDF.patch
  - keep EVP_KDF functions at version 1.1.1d for backward compatibility
    * add openssl-keep_EVP_KDF_functions_version.patch
* Fri Dec 20 2019 Pedro Monreal Gonzalez <>
  - Support for CPACF enhancements - part 1 (crypto) [bsc#1152695, jsc#SLE-7861]
  - Add patches:
    * openssl-s390x-assembly-pack-add-OPENSSL_s390xcap-environment.patch
    * openssl-s390x-assembly-pack-add-support-for-pcc-and-kma-inst.patch
    * openssl-s390x-assembly-pack-add-OPENSSL_s390xcap-man-page.patch
    * openssl-s390x-assembly-pack-update-OPENSSL_s390xcap-3.patch
    * openssl-assembly-pack-accelerate-scalar-multiplication.patch
    * openssl-Enable-curve-spefific-ECDSA-implementations-via-EC_M.patch
    * openssl-s390x-assembly-pack-accelerate-ECDSA.patch
    * openssl-OPENSSL_s390xcap.pod-list-msa9-facility-bit-155.patch
    * openssl-s390x-assembly-pack-cleanse-only-sensitive-fields.patch
    * openssl-s390x-assembly-pack-fix-OPENSSL_s390xcap-z15-cpu-mas.patch
    * openssl-s390x-assembly-pack-fix-msa3-stfle-bit-detection.patch
    * openssl-Fix-9bf682f-which-broke-nistp224_method.patch
* Wed Dec 18 2019 Vítězslav Čížek <>
  - Obsolete libopenssl-1_0_0-devel in order to avoid conflict upon
    upgrade from SLE-12 (bsc#1158499)
  - remove useless Suggests: libopenssl1_1-hmac, there's no such
    package anymore
* Tue Dec 10 2019 Pedro Monreal Gonzalez <>
  - Security fix: [bsc#1158809, CVE-2019-1551]
    * Overflow bug in the x64_64 Montgomery squaring procedure used
      in exponentiation with 512-bit moduli
  - Add openssl-1_1-CVE-2019-1551.patch
* Mon Oct 14 2019 Jason Sikes <>
  - Merged upstream changes to allow NULL salt values in EVP_PBE_scrypt().
    * Revealed by nodejs12 during bsc#1149572.
    * Modified openssl-jsc-SLE-8789-backport_KDF.patch
* Mon Oct 14 2019 Adam Majer <>
  - openssl-jsc-SLE-8789-backport_KDF.patch: retain old behaviour
    of EVP_PBE_scrypt. When key output buffer is not provided,
    only check if the input parameters are in valid range and
    ignore passphrase/salt fields as they are only used in
    the actual calculation.
* Wed Sep 11 2019 Vítězslav Čížek <>
  - Update to 1.1.1d (bsc#1133925, jsc#SLE-6430)
    * Fixed a fork protection issue. OpenSSL 1.1.1 introduced a rewritten random
      number generator (RNG). This was intended to include protection in the
      event of a fork() system call in order to ensure that the parent and child
      processes did not share the same RNG state. However this protection was not
      being used in the default case.
      (bsc#1150247, CVE-2019-1549)
    * Compute ECC cofactors if not provided during EC_GROUP construction. Before
      this change, EC_GROUP_set_generator would accept order and/or cofactor as
      NULL. After this change, only the cofactor parameter can be NULL.
      (bsc#1150003, CVE-2019-1547)
    * Fixed a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey.
      (bsc#1150250, CVE-2019-1563)
    * For built-in EC curves, ensure an EC_GROUP built from the curve name is
      used even when parsing explicit parameters, when loading a serialized key
      or calling EC_GROUP_new_from_ecpkparameters()/EC_GROUP_new_from_ecparameters().
    * Early start up entropy quality from the DEVRANDOM seed source has been
      improved for older Linux systems.
    * Changed DH_check to accept parameters with order q and 2q subgroups.
      With order 2q subgroups the bit 0 of the private key is not secret
      but DH_generate_key works around that by clearing bit 0 of the
      private key for those. This avoids leaking bit 0 of the private key.
    * Significantly reduce secure memory usage by the randomness pools.
    * Revert the DEVRANDOM_WAIT feature for Linux systems
  - drop 0001-build_SYS_str_reasons-Fix-a-crash-caused-by-overlong.patch (upstream)
  - refresh patches
    * openssl-1.1.0-no-html.patch
    * openssl-jsc-SLE-8789-backport_KDF.patch
* Tue Sep 10 2019 Jason Sikes <>
  - To avoid seperate certification of openssh server / client
    move the SSH KDF (Key Derivation Function) into openssl.
    * jsc#SLE-8789
    * Sourced from commit
      in openssl master (introduce the SSH KDF)
      and commit 5a285addbf39f91d567f95f04b2b41764127950d
      in openssl master (backport EVP/KDF API framework)
    * added openssl-jsc-SLE-8789-backport_KDF.patch
* Thu Jun 06 2019 Vítězslav Čížek <>
  - Use upstream patch for the locale crash (bsc#1135550)
  - delete openssl-fix_underflow_in_errstr_handling.patch
  - add 0001-build_SYS_str_reasons-Fix-a-crash-caused-by-overlong.patch
* Thu Jun 06 2019 Vítězslav Čížek <>
  - Add s390x vectorized support for ChaCha20 and Poly1305
    (jsc#SLE-6126, jsc#SLE-6129)
    * 0001-s390x-assembly-pack-perlasm-support.patch
    * 0004-s390x-assembly-pack-fix-formal-interface-bug-in-chac.patch
    * 0005-s390x-assembly-pack-import-chacha-from-cryptogams-re.patch
    * 0006-s390x-assembly-pack-import-poly-from-cryptogams-repo.patch
  - delete
* Thu May 30 2019 Vítězslav Čížek <>
  - Update to 1.1.1c (bsc#1133925, jsc#SLE-6430)
    * Prevent over long nonces in ChaCha20-Poly1305 (CVE-2019-1543)
      ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input
      for every encryption operation. RFC 7539 specifies that the nonce value
      (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length
      and front pads the nonce with 0 bytes if it is less than 12
      bytes. However it also incorrectly allows a nonce to be set of up to 16
      bytes. In this case only the last 12 bytes are significant and any
      additional leading bytes are ignored.
    * Add build tests for C++.  These are generated files that only do one
      thing, to include one public OpenSSL head file each.  This tests that
      the public header files can be usefully included in a C++ application.
    * Enable SHA3 pre-hashing for ECDSA and DSA.
    * Change the default RSA, DSA and DH size to 2048 bit instead of 1024.
      This changes the size when using the genpkey app when no size is given. It
      fixes an omission in earlier changes that changed all RSA, DSA and DH
      generation apps to use 2048 bits by default.
    * Reorganize the manual pages to consistently have RETURN VALUES,
      EXAMPLES, SEE ALSO and HISTORY come in that order, and adjust
      util/fix-doc-nits accordingly.
    * Add the missing accessor EVP_PKEY_get0_engine()
    * Have apps like 's_client' and 's_server' output the signature scheme
      along with other cipher suite parameters when debugging.
    * Make OPENSSL_config() error agnostic again.
    * Do the error handling in RSA decryption constant time.
    * Ensure that SM2 only uses SM3 as digest algorithm
  - drop upstreamed patches:
    * openssl-fix-handling-of-GNU-strerror_r.patch
    * 0001-Fix-for-BIO_get_mem_ptr-and-related-regressions.patch
  - update keyring by including Richard Levitte's key
* Tue May 28 2019 Jiri Slaby <>
  - add 0001-Fix-for-BIO_get_mem_ptr-and-related-regressions.patch
* Mon May 20 2019 Vítězslav Čížek <>
  - Fix a crash caused by long locale messages (bsc#1135550)
    * add openssl-fix_underflow_in_errstr_handling.patch
* Mon Mar 04 2019 Dominique Leuenberger <>
  - Drop bc and ed BuildRequires: I could not find any reference to
    these tools being used during build or check.
* Fri Mar 01 2019 Vítězslav Čížek <>
  - Use upstream-approved patch for the handling of strerror_r
  - add openssl-fix-handling-of-GNU-strerror_r.patch
  - drop strerror.patch
* Thu Feb 28 2019 Pedro Monreal Gonzalez <>
  - Update to 1.1.1b
    * Added SCA hardening for modular field inversion in EC_GROUP
      through a new dedicated field_inv() pointer in EC_METHOD.
    * Change the info callback signals for the start and end of a post-handshake
      message exchange in TLSv1.3. In 1.1.1/1.1.1a we used SSL_CB_HANDSHAKE_START
      and SSL_CB_HANDSHAKE_DONE. Experience has shown that many applications get
      confused by this and assume that a TLSv1.2 renegotiation has started. This
      can break KeyUpdate handling. Instead we no longer signal the start and end
      of a post handshake message exchange (although the messages themselves are
      still signalled). This could break some applications that were expecting
      the old signals. However without this KeyUpdate is not usable for many
    * Fix a bug in the computation of the endpoint-pair shared secret used
      by DTLS over SCTP. This breaks interoperability with older versions
      of OpenSSL like OpenSSL 1.1.0 and OpenSSL 1.0.2. There is a runtime
      switch SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG (off by default) enabling
      interoperability with such broken implementations. However, enabling
      this switch breaks interoperability with correct implementations.
    * Fix a use after free bug in d2i_X509_PUBKEY when overwriting a
      re-used X509_PUBKEY object if the second PUBKEY is malformed.
    * Move strictness check from EVP_PKEY_asn1_new() to EVP_PKEY_asn1_add0()
* Thu Feb 28 2019 Vítězslav Čížek <>
  - Add strerror.patch to avoid problems with strerror_r() not setting
    the provided buf
* Mon Feb 11 2019 Vítězslav Čížek <>
  - Add s390x poly1305 vectorized implementation (fate#326351)
  - add
* Thu Jan 10 2019 Vítězslav Čížek <>
  - Add s390x chacha20 vectorized implementation (fate#326561)
  - added patches:



Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Apr 9 10:32:05 2023