Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

vnstat-cgi-2.7-2.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: vnstat-cgi Distribution: openSUSE Tumbleweed
Version: 2.7 Vendor: openSUSE
Release: 2.1 Build date: Fri Jun 11 00:44:22 2021
Group: Productivity/Networking/Diagnostic Build host: armbuild10
Size: 86809 Source RPM: vnstat-2.7-2.1.src.rpm
Packager: http://bugs.opensuse.org
Url: http://humdi.net/vnstat
Summary: Graph Visualization CGI Script for vnstat
vnStat is a network traffic monitor for Linux that keeps a log of
daily network traffic for the selected interface(s). vnStat isn't a
packet sniffer. The traffic information is analyzed from the /proc
filesystem, so vnStat can be used without root permissions.

This package contains a CGI script that visualizes graphs of the
collected traffic statistics.

Provides

Requires

License

GPL-2.0-only

Changelog

* Sun Jun 06 2021 Martin Hauke <mardnh@gmx.de>
  - Install examples/systemd/simple/vnstat.service
  - Drop not longer needed patch:
    * systemd234.patch
* Sun May 16 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.7
    Fixed
    * Possibility of segmentation fault with image list output when
      database existed but no data was available.
    * ./configure output could show invalid install paths with some
      parameter combinations.
    * Columns in text hours graph output could get misaligned if the
      selected system locale used a UTF-8 sequence for the thousands
      separator instead of a single character.
    New
    * Add -5g / --fivegraph options to image output with sizing
      related parameters for the output of a 5 minute resolution bar
      graph
    * Add configuration option SummaryGraph and optional parameter
      for --hsummary and --vsummary for selecting which graph is
      shown next to the summary data in the horizontal and vertical
      summary image outputs.
    * Add --large / --small options and configuration option
      LargeFonts for controlling the image output font size.
    * Add --scale and configuration option ImageScale for scaling the
      image output to a given percent.
    * Add configuration option LineSpacingAdjustment for adjusting
      the line spacing of list format image outputs.
    * Add bar visualizations for traffic estimations in image output
    * Allow writing image output to a filename starting with "-".
    * Add --initdb to daemon for creating a new empty database
      without having the daemon process staying running, doesn't
      discard data if a database already exists.
    * Add configuration option BarColumnShowsRate for having the bar
      column in image list outputs be scaled according to the average
      rate column values when those values are visible, disabled by
      default.
    * Add --dbiflist for getting a list of interfaces in the
      database, both --iflist and --dbiflist also get alternative
      more parseable outputs.
    * Add configuration option for large font output and make 5
      minute resolution graph visible in "vnstat.cgi".
* Thu Oct 01 2020 Peter Varkoly <varkoly@suse.com>
  - Adapt mod_authz_host parameter instead of deprecated mod_access_compat
    parametere.
* Mon Feb 03 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
    shortcut through the -mini flavors.
* Mon Jan 20 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.6
    Fixed
    * --json and --xml didn't support having both mode and limit
      parameters defined at the same time as documented, broken since
      previous release
    * Documentation was using a mix of "count" and "limit" for the
      option of limiting the maximum number of shown entries in
      queries
    * Summary image output would segmentation fault when the database
      existed but didn't yet contain any daily or monthly data for
      the selected interface
    New
    * Add --limit as an alternative way for controlling the length
      of outputs
* Tue Jan 14 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5
    Fixed
    * Automatic interface selection wasn't done for --traffic and
    - -live when the Interface configuration setting was left empty
    * --setalias didn't do anything when used in combination
      with --add
    * -l / --live and -tr default to first interface instead of
      producing an error if a interface merge is requested
* Mon Aug 26 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.4
    Fixed
    * Daemon didn't correctly wait when acquiring database lock for
      data write which could result in unnecessary errors and even
      process exit if an external database read operation had exactly
      the same timing as the daemon write operation
    * Move vnstatd man page from section 1 to section 8
    New
    * Add --rename for renaming interfaces already existing the
      database
* Wed Jul 10 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.3
    Fixed
    * Traffic rate wasn't being shown for the last entry of most lists
      during the first update of the next period (first SaveInterval
      minutes of each new hour, day, month and year)
    * Systemd example service file could result in database file write
      issues if the used systemd version supported ProtectSystem=strict
      but didn't support StateDirectory
    * Interfaces could end up staying marked as 'disabled' in the
      database even after becoming back active and monitored, only the
      shown status was wrong without resulting in any data loss
    * Some image outputs didn't allocate enough height for the image
      resulting in the last row having less space below it than intended
    New
    * Automatic interface selection when the Interface configuration
      setting is left empty (new default)
    * Add configuration option DatabaseWriteAheadLogging to enable
      SQLite Write-Ahead Logging mode which may provide some disk i/o
      benefits, see https://www.sqlite.org/wal.html for more details and
      note that SQLite 3.22.0 or later is required to support read-only
      operations
    * Add configuration option DatabaseSynchronous for changing the
      SQLite setting of the "synchronous" flag, see
      https://www.sqlite.org/pragma.html#pragma_synchronous for more
      details
    * Show warning in log if writing cached data to database is slow
    * Try database query for up to 5 seconds when database is busy or
      locked instead of giving up immediately
    * Continue daemon process execution with data caching if database
      writes fail due to disk being full
  - Update patch:
    * systemd234.patch
* Sun Jun 02 2019 Martin Hauke <mardnh@gmx.de>
  - Add Buildrequires: check-devel and enabled %%check section
* Mon May 13 2019 Mathias Homann <Mathias.Homann@opensuse.org>
  - Update to version 2.2
    Fixed
    * O_CLOEXEC undeclared error when compiling with glibc older than 2.12
    * Image output --headertext wasn't being applied to some output types
    * DefaultDecimals setting wasn't controlling all outputs
    * Traffic rate for the last entry of the 5 minute resolution list wasn't
      being correctly calculated
    New
    * Detection of 32-bit / 64-bit kernel interface counters for improving
      traffic calculations in rollover situations, cfg: 64bitInterfaceCounters
    * Possibility in queries to merge data from multiple interfaces to one
      output with interface1+interface2 syntax
    * Highlight current day in top list when visible
    * Changes in interface specific detected bandwidth limits are reported
      in the log
    * UpdateInterval value is automatically adjusted during daemon startup if
      found to be too high compared to the value of MaxBandwidth
    Notes
    * Added clarification to the man page that the 'jsonversion' and
      'xmlversion' fields in the --json and --xml outputs should be seen as
      the API version and compared to the previously used version in 3rd party
      implementations for verifying compatibility
    * Default value of UpdateInterval is now 20 instead of previous 30 seconds
* Fri Apr 26 2019 Martin Hauke <mardnh@gmx.de>
  - Verify source signature
  - Update to version 2.1
    Fixed:
    * --oneline could segmentation fault if database had total traffic values
      set but didn't have any daily or monthly traffic (Arch bug #60588)
    * No proper error message was produced when querying interface which didn't
      exist in the database
    * Daemon:waittimesync_does_not_wait_with_new_interfaces test was failing if
      the system used a time zone with a negative numeric value
    * Traffic estimate and average rate for ongoing month was not being
      calculated correctly when MonthRotate had a value greater than 1
    * Accuracy of traffic estimate and average rate for the ongoing month could
      be slightly skewed depending on the used time zone
    New:
    * Remove possible PollInterval and UpdateInterval drift over time
    * Sync SaveInterval to full minutes
  - Update to version 2.0
    Fixed:
    * Data rate calculations when using SI decimal prefixes
    * Workaround for filled arcs not drawn correctly with some versions
      of libgd (libgd/libgd#351)
    New
    * C struct dump database has been replaced with sqlite database,
    * full data import included from legacy databases of versions 1.3 - 1.18
    * User configurable data retention durations for all resolutions with
      following changed defaults:
      v1.18     v2.0
      5 minutes     n/a      576   (48 hours)
      hours          24       96   (4 days)
      days           30       62   (2 full months)
      months         12       25   (2 full years)
      years         n/a      all
      top days       10       20
    * Option to select units to use SI decimal prefixes using calculations
      with powers of 1000 (IEC and JEDEC prefixes use powers of 1024)
    * Yearly and 5 minute resolution statistics
    * Pebibyte and exbibyte support
    * Options the configure the length of each list output
    * Option to limit the length of --json and --xml outputs
    * Hourly list output replaces the hourly graph when the -h parameter is used
    * Hourly graph is accessible with -hg / --hoursgraph parameter
    * Options -b / --begin and -e / --end for specifying query time range
    * Configuration comes with ISO 8601 date formats as new defaults
    Removed
    * Weekly output
    * Merge of data from multiple interfaces to one output
    * --testkernel
    * --exportdb, use --oneline, --json or --xml instead
    * --importdb, -u / --update and related options using vnstat command
    * Old style (default in versions up to 1.7) summary layout in image output
* Thu Apr 11 2019 Dirk Stoecker <opensuse@dstoecker.de>
  - Don't use new systemd service options for system below 235 (systemd234.patch)
* Wed Jan 23 2019 Mathias Homann <Mathias.Homann@opensuse.org>
  - Update to 2.1
    2.1 / 6-Dec-2018
    * Fixed
    * --oneline could segmentation fault if database had total traffic values
      set but didn't have any daily or monthly traffic (Arch bug #60588)
    * No proper error message was produced when querying interface which didn't
      exist in the database
    * Several typos and spelling mistakes in documentation
    * Daemon:waittimesync_does_not_wait_with_new_interfaces test was failing if
      the system used a time zone with a negative numeric value
    * Traffic estimate and average rate for ongoing month was not being
      calculated correctly when MonthRotate had a value greater than 1
    * Accuracy of traffic estimate and average rate for the ongoing month could
      be slightly skewed depending on the used time zone
    * New
    * Remove possible PollInterval and UpdateInterval drift over time
    * Sync SaveInterval to full minutes
    2.0 / 21-Oct-2018
    * Fixed
    * Data rate calculations when using SI decimal prefixes
    * Workaround for filled arcs not drawn correctly with some versions
      of libgd (libgd/libgd#351)
    * New
    * C struct dump database has been replaced with sqlite database,
      full data import included from legacy databases of versions 1.3  * 1.18
    * User configurable data retention durations for all resolutions with
      following changed defaults:
      v1.18     v2.0
      5 minutes     n/a      576   (48 hours)
      hours          24       96   (4 days)
      days           30       62   (2 full months)
      months         12       25   (2 full years)
      years         n/a      all
      top days       10       20
    * Option to select units to use SI decimal prefixes using calculations
      with powers of 1000 (IEC and JEDEC prefixes use powers of 1024)
    * Yearly and 5 minute resolution statistics
    * Pebibyte and exbibyte support
    * Options the configure the length of each list output
    * Option to limit the length of --json and --xml outputs
    * Hourly list output replaces the hourly graph when the -h parameter is used
    * Hourly graph is accessible with -hg / --hoursgraph parameter
    * Options -b / --begin and -e / --end for specifying query time range
    * Configuration comes with ISO 8601 date formats as new defaults
    * Removed
    * Weekly output
    * Merge of data from multiple interfaces to one output
    * --testkernel
    * --exportdb, use --oneline, --json or --xml instead
    * --importdb, -u / --update and related options using vnstat command
    * Old style (default in versions up to 1.7) summary layout in image output
* Wed May 23 2018 liedke@rz.uni-mannheim.de
  - Update to 1.18
    * Fix: Misspellings, compiler warnings and possible error situations
      (pull requests by Christian Göttsche)
    * Hardening added to examples/systemd/vnstat.service
      (pull request by Christian Göttsche)
    * Add RTC sanity check and sync wait to daemon startup, the possible wait
      duration can be configured using the TimeSyncWait keyword
    * Add optional parameter to --oneline output for forcing fields to output
      in bytes
    * Add --json support for -l / --live and -tr outputs
    * Number of decimals used in outputs can be configured using DefaultDecimals
      and HourlyDecimals
    * Add section separators for improving readabilty of the vnstat -h output,
      configurable using HourlySectionStyle
* Tue Feb 21 2017 liedke@rz.uni-mannheim.de
  - Update to 1.17:
    * Fix: --importdb was creating invalid databases since version
      1.15
    * Fix: console output was being buffered which resulted in lack
      of output in at least systemd log
    * Add cross-compilation detection and improve install-data-hook
      to not assume that the binaries can be executed in the host
      system
  - Update to 1.16:
    * Fix: traffic rate calculation, SI decimal prefixes were shown
      but calculation was done for IEC binary prefixes
    * Add option for configure to disable image output support even
      if required library is available, improve library detection
    * Add selection between SI decimal prefixes (kbit/s...) (default)
      and IEC binary prefixes (Kibit/s...) for traffic rate using
      RateUnitMode keyword in configuration file
    * Improve database handling resilience
    * Inherit database file ownership from database directory if
      UpdateFileOwner configuration option is enabled (default:
      enabled) when adding new interfaces for monitoring as root.
      This solves database file ownership mismatches when the daemon
      is started as a non-root user and an interface gets added for
      monitoring with a sudo command as root
    * Improve user guidance in error situations related to the
      configured default interface
* Sat Mar 05 2016 sor.alexei@meowr.ru
  - Update to 1.15:
    * Fix: XML output had extra commas, broken since previous version.
    * Fix: unintended shared pointer modification in mosecs()
      sometimes resulted in wrong month name to be shown for the
      current month.
    * Fix possible buffer overflow in /proc/net/dev parsing, requires
      corrupted content in /proc/net/dev or use of address sanitiser.
    * Use ANSI escape codes in -l and -tr modes for cursor location
      manipulation instead of printing backspaces, hide cursor while
      output is active.
    * Improve database import robustness.
    * Improve support for Asian UTF-8 date strings.
    * Replace hand written Makefiles with autotools.
    * Add --alwaysadd parameter to daemon for allowing automatic
      addition of interfaces even if the database directory was
      populated during startup.
* Tue Aug 18 2015 Mathias.Homann@opensuse.org
  - Fix: vnstati was missing from build, needed for vnstat-cgi to function.
* Tue Aug 04 2015 sor.alexei@meowr.ru
  - Update to 1.14 (changes since 1.11):
    * Fix memory allocation when zero interfaces are available,
      also lo needed to be missing in order to trigger this leak.
    * Fix rebuild total indexing.
    * Fix some error situations that could leave database file open
      until the end of command execution
    * Fix: Live traffic meter occasionally showing higher minimum
      than average in end statistics.
    * Fix setting locale when none is specified in config.
    * Fix cppcheck findings.
    * Improve traffic meter output accuracy.
    * Add tests and debug compilation target.
    * Remove use of -D parameter in Makefile install commands in
      order to improve cross-compilation support.
    * Set CFLAGS in Makefiles only when not already defined.
    * Add support for database import from text file (--importdb).
    * Rename --dumpdb to --exportdb.
    * Add example systemd service file.
    * Use ISO YYYY-MM-DD date format timestamps if logfile is used.
    * Improve daemon startup prints.
    * Add parameters for changing daemon process user and group.
    * Add example upstart job configuration file.
    * Create database, pid and log dirs during daemon startup if
      necessary.
    * Update ownership of database, log and pid files if needed
      during daemon startup if started as root and configured to
      change process user and group.
    * Remove cron update related example files and documentation, the
      cron update method should be considered as deprecated.
    * --create parameter for database creation.
    * Dynamic unit selection in hourly output instead of being fixed
      to KiB.
    * New options in image output (vnstati):
      + -nl / --nolegend for hiding the rx/tx legend;
      + --altdate for using alternative date and time text location;
      + --headertext for using custom text string in image header;
      section.
    * Add legend to hourly output image.
    * Add option for content alignment and page background colour to
      vnstat.cgi.
    * Document keyword value ranges in configuration file man page.
    * Import Makefile improvements from OpenBSD.
    * Automatic interface bandwidth detection, BandwidthDetection in
      config, default fallback value MaxBandwidth changed from 100 to
      1000.
    * JSON output (--json), vnstat-json.cgi and vnstat-json.php
      examples provided in the 'examples' directory
    * Drop support for over 10 year old database formats
      (versions 1.0 - 1.2).
    * Fix: JSON output syntax during first day of newly created
      databases.
    * Fix: field padding when using UTF-8 locale.
    * Add optional mode parameter to --json and --xml for limiting
      the output to only selected information.
  - Add a systemd service.
  - Remove vnstat-cron.patch and cronjob: upstream considers it
    deprecated.
  - Remove vnstat-help_script.patch: fixed upstream.
  - Only recommend Apache for vnstat-cgi: there are other HTTP
    servers.
  - Spec cleanup.
* Sun Aug 10 2014 chris+dev@any.mx
  - removed '-u' parameter from init.d script to actually being able to start the daemon
* Wed Jul 31 2013 cwh@suse.com
  - Fixed spec file (removed lost pach files)
* Sun Jul 07 2013 lars@linux-schulserver.de
  - remove the '-o' option in useradd: -o is useless without -u and
    newer versions of pwdutils/shadowutils fail on this now
  - specfile cleanup (added license header and cron dependency)
  - fix address of Free Software Foundation in init script
* Mon Feb 04 2013 lars@linux-schulserver.de
  - update to 1.11:
    * Fix: Memory allocation was miscalculated when creating interface list from
      /sys/class/net when /proc/net/dev wasn't available which in turn could
      crash the daemon
    * Fix: Daemon database cache could remain empty after a -HUP signal
    * Fix: Don't make temp directory in vnstat.cgi writable for everyone
    * Import GNU/kFreeBSD support from Debian
    (#608963, patch by Mats Erik Andersson)
    * Remove usage of GNU only '-D' option for install for BSD in Makefile
    * The daemon now automatically creates databases for available interfaces
    if no databases are found during startup
* Mon Feb 04 2013 lars@linux-schulserver.de
  - prevent cron from writing a syslog message about the vnstat call
* Sat Aug 21 2010 highwaystar.ru@gmail.com
  - update to 1.10:
    * Fix: Buffer overflow was possible in hourly image output when RateUnit=1
    and HourlyRate=1
    * Fix: Minor memory leak was possible in the handling of HUP signal in daemon
    * Fix: Graphical elements weren't correctly aligned in summary image
    when header wasn't visible (-nh)
    * Fix: --delete didn't work
    * Possibility to merge statistics from several databases and save
    the end result to a new database (--mergesaved)
    * Added validation of database cache in daemon in order to be more robust
    in case of system memory corruption
    * Support for --style to -l (live mode)
    * Alternative print mode to -l (live mode) with optional parameter
    * Present options and elements in man pages in alphabetical order
    * Code cleanup
  - changes in 1.9:
    * Fix: TrafficlessDays configuration option was enabled when set to zero
    when it should have been disabled
    * Fix: MonthRotate setting was getting ignored for the first month if
    the database is created when day of month < MonthRotate value
    * Configurable summary layout in image output (1.7 <> 1.8 layouts)
    * --oneline, a simple parseable one line output
    * --transparent for setting image background transparency from the
    command line
    * --delete for deleting databases and stopping monitoring, doesn't require
    restarting the daemon
    * A database write can be configure to occur after interface status changes
    * Different database write interval can be configure to be used when
    all monitored interfaces are offline
    * Better configurability for the content of outputs, including a narrow
    output for space limited terminals (OutputStyle and --style)
    * Code cleanup
    * New configuration file settings:
    OutputStyle, SummaryLayout, SummaryRate, SaveOnStatusChange,
    OfflineSaveInterval
* Wed Aug 19 2009 poeml@suse.de
  - fix segfault caused by vnstat-limits+su.patch.
    vnstat-limits+su+fix.patch added.
* Sun Aug 02 2009 pascal.bleser@opensuse.org
  - update to 1.8:
    * makes averaged traffic rates visible
    * adds monthly traffic to the summary
    * supports merging data from multiple interfaces to one output
    * dates are now formatted according to the system locale setting by default
* Tue May 26 2009 poeml@novell.com
  - change ownership also of existing backup files of the database
  - ignore '.' and '..' when modifying files -- the previous method could change
    the ownership of /var/lib...
* Tue May 26 2009 poeml@novell.com
  - move creation of "vnstat" user from %post to %pre, so that it happens before
    files are installed
  - make vnstat a system user and create a separate group "vnstat" for it
  - prerequire the tools needed for the pre/post scripts
  - change ownership of existing databases from root to vnstat user, when updating
* Mon May 25 2009 pascal.bleser@opensuse.org
  - don't filter out br interfaces, thanks to Dmitry Mittov for noticing
* Fri May 15 2009 pascal.bleser@opensuse.org
  - add a little frontend script to create the vnstat databases as the vnstat user
  - add patch to vnstat help output to tell to use the script to create a database
* Fri May 15 2009 pascal.bleser@opensuse.org
  - install hook scripts into /etc/ppp/*.d/
  - install CGI + patch heavily, using a subpackage vnstat-cgi
  - add support for vnstatd (added in 1.7) with init script, vnstat user, and an improved cron job file
  - add switch user support during daemonization to vnstatd
  - fix all compile warnings
  - update to 1.7:
    * Fix: Timezone changes shouldn't cause a flood of errors anymore
    * Fix: MonthRotate value in config wasn't used
    * Fix: Unreadable configuration file doesn't cause a segmentation fault
    * Fix: /proc/net/dev parser didn't see the difference between eth10 and eth1
    * Fix: Updating a database from two of more processes at the same time was able to sometimes cause data loss
    * Fix: Estimates are calculated based on last database update
    * Fix: Each interface update had a possibility of losing 1023 bytes of traffic at most due to improper rounding
    * Daemon support as alternative for cron based updates
    * PNG image output (hourly rate based on patch by Sergio Ammirata)
    * XML output
    * Diskspace check can be disabled from configuration file
    * IEC standard prefixes (KiB/MiB/GiB/TiB)
    * List of available interfaces if wrong of unavailable interface is selected
* Wed Feb 20 2008 poeml@suse.de
  - update to 1.6:
    1.6 / 1-Jan-08
    - Fix: Segmentation fault when environment variable "HOME" wasn't defined,
      this broke most CGI and PHP scripts that used vnStat
    - Support for /sys/class/net/* if /proc/net/dev is unavailable
    - Config file parser redesigned
    - --config parameter for selecting config file
    - Consistent exit status for all operations (0 for success, 1 for error)
    - Improved file locking
    - Man page restrictions paragraph updated
    - Minor non-visible fixes and code cleanup
    1.5 / 3-Dec-07
    - Fix: compile time warnings solved
    - Fix: kernel test is now more verbose
    - Fix: more informative error messages
    - Fix: possible division by zero for traffic estimates right after midnight
    - Fix: interface names longer than 6 chars (patch by Jan Schmidle)
    - Realtime transfer rate mode
    - Automatic 32bit/64bit counter detection
    - Config file support
    - Internal database backups and locking
    - More visuals in outputs
    - Adaptive units (kB, MB, GB, TB)
    - Possibility to sync counters without counting traffic
    - Maximum bandwidth of interfaces can be set
* Wed Feb 20 2008 poeml@suse.de
  - re-import the package sources from 10.1, they got lost
* Wed Jan 25 2006 mls@suse.de
  - converted neededforbuild to BuildRequires
* Sat Jul 02 2005 hvogel@suse.de
  - make use of optflags
* Mon Jun 06 2005 hvogel@suse.de
  - add suse.de- prefix to the cron script
* Tue Feb 15 2005 hvogel@suse.de
  - Use "-" in cron file to suppress syslog message
* Tue Feb 08 2005 hvogel@suse.de
  - New Package, Version 1.4

Files

/etc/apache2
/etc/apache2/conf.d
/etc/apache2/conf.d/vnstat.conf
/srv/vnstat
/srv/vnstat/vnstat.cgi
/usr/bin/vnstati
/usr/share/man/man1/vnstati.1.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Fri Nov 19 23:17:08 2021