Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

vnstat-2.7-2.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: vnstat Distribution: openSUSE Tumbleweed
Version: 2.7 Vendor: openSUSE
Release: 2.1 Build date: Fri Jun 11 00:44:22 2021
Group: Productivity/Networking/Diagnostic Build host: armbuild10
Size: 258696 Source RPM: vnstat-2.7-2.1.src.rpm
Packager: http://bugs.opensuse.org
Url: http://humdi.net/vnstat
Summary: Network Traffic Monitor
vnStat is a network traffic monitor for Linux that keeps a log of
daily network traffic for the selected interface(s). vnStat isn't a
packet sniffer. The traffic information is analyzed from the /proc
filesystem, so vnStat can be used without root permissions.

Provides

Requires

License

GPL-2.0-only

Changelog

* Sun Jun 06 2021 Martin Hauke <mardnh@gmx.de>
  - Install examples/systemd/simple/vnstat.service
  - Drop not longer needed patch:
    * systemd234.patch
* Sun May 16 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.7
    Fixed
    * Possibility of segmentation fault with image list output when
      database existed but no data was available.
    * ./configure output could show invalid install paths with some
      parameter combinations.
    * Columns in text hours graph output could get misaligned if the
      selected system locale used a UTF-8 sequence for the thousands
      separator instead of a single character.
    New
    * Add -5g / --fivegraph options to image output with sizing
      related parameters for the output of a 5 minute resolution bar
      graph
    * Add configuration option SummaryGraph and optional parameter
      for --hsummary and --vsummary for selecting which graph is
      shown next to the summary data in the horizontal and vertical
      summary image outputs.
    * Add --large / --small options and configuration option
      LargeFonts for controlling the image output font size.
    * Add --scale and configuration option ImageScale for scaling the
      image output to a given percent.
    * Add configuration option LineSpacingAdjustment for adjusting
      the line spacing of list format image outputs.
    * Add bar visualizations for traffic estimations in image output
    * Allow writing image output to a filename starting with "-".
    * Add --initdb to daemon for creating a new empty database
      without having the daemon process staying running, doesn't
      discard data if a database already exists.
    * Add configuration option BarColumnShowsRate for having the bar
      column in image list outputs be scaled according to the average
      rate column values when those values are visible, disabled by
      default.
    * Add --dbiflist for getting a list of interfaces in the
      database, both --iflist and --dbiflist also get alternative
      more parseable outputs.
    * Add configuration option for large font output and make 5
      minute resolution graph visible in "vnstat.cgi".
* Thu Oct 01 2020 Peter Varkoly <varkoly@suse.com>
  - Adapt mod_authz_host parameter instead of deprecated mod_access_compat
    parametere.
* Mon Feb 03 2020 Dominique Leuenberger <dimstar@opensuse.org>
  - BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
    shortcut through the -mini flavors.
* Mon Jan 20 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.6
    Fixed
    * --json and --xml didn't support having both mode and limit
      parameters defined at the same time as documented, broken since
      previous release
    * Documentation was using a mix of "count" and "limit" for the
      option of limiting the maximum number of shown entries in
      queries
    * Summary image output would segmentation fault when the database
      existed but didn't yet contain any daily or monthly data for
      the selected interface
    New
    * Add --limit as an alternative way for controlling the length
      of outputs
* Tue Jan 14 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5
    Fixed
    * Automatic interface selection wasn't done for --traffic and
    - -live when the Interface configuration setting was left empty
    * --setalias didn't do anything when used in combination
      with --add
    * -l / --live and -tr default to first interface instead of
      producing an error if a interface merge is requested
* Mon Aug 26 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.4
    Fixed
    * Daemon didn't correctly wait when acquiring database lock for
      data write which could result in unnecessary errors and even
      process exit if an external database read operation had exactly
      the same timing as the daemon write operation
    * Move vnstatd man page from section 1 to section 8
    New
    * Add --rename for renaming interfaces already existing the
      database
* Wed Jul 10 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.3
    Fixed
    * Traffic rate wasn't being shown for the last entry of most lists
      during the first update of the next period (first SaveInterval
      minutes of each new hour, day, month and year)
    * Systemd example service file could result in database file write
      issues if the used systemd version supported ProtectSystem=strict
      but didn't support StateDirectory
    * Interfaces could end up staying marked as 'disabled' in the
      database even after becoming back active and monitored, only the
      shown status was wrong without resulting in any data loss
    * Some image outputs didn't allocate enough height for the image
      resulting in the last row having less space below it than intended
    New
    * Automatic interface selection when the Interface configuration
      setting is left empty (new default)
    * Add configuration option DatabaseWriteAheadLogging to enable
      SQLite Write-Ahead Logging mode which may provide some disk i/o
      benefits, see https://www.sqlite.org/wal.html for more details and
      note that SQLite 3.22.0 or later is required to support read-only
      operations
    * Add configuration option DatabaseSynchronous for changing the
      SQLite setting of the "synchronous" flag, see
      https://www.sqlite.org/pragma.html#pragma_synchronous for more
      details
    * Show warning in log if writing cached data to database is slow
    * Try database query for up to 5 seconds when database is busy or
      locked instead of giving up immediately
    * Continue daemon process execution with data caching if database
      writes fail due to disk being full
  - Update patch:
    * systemd234.patch
* Sun Jun 02 2019 Martin Hauke <mardnh@gmx.de>
  - Add Buildrequires: check-devel and enabled %%check section
* Mon May 13 2019 Mathias Homann <Mathias.Homann@opensuse.org>
  - Update to version 2.2
    Fixed
    * O_CLOEXEC undeclared error when compiling with glibc older than 2.12
    * Image output --headertext wasn't being applied to some output types
    * DefaultDecimals setting wasn't controlling all outputs
    * Traffic rate for the last entry of the 5 minute resolution list wasn't
      being correctly calculated
    New
    * Detection of 32-bit / 64-bit kernel interface counters for improving
      traffic calculations in rollover situations, cfg: 64bitInterfaceCounters
    * Possibility in queries to merge data from multiple interfaces to one
      output with interface1+interface2 syntax
    * Highlight current day in top list when visible
    * Changes in interface specific detected bandwidth limits are reported
      in the log
    * UpdateInterval value is automatically adjusted during daemon startup if
      found to be too high compared to the value of MaxBandwidth
    Notes
    * Added clarification to the man page that the 'jsonversion' and
      'xmlversion' fields in the --json and --xml outputs should be seen as
      the API version and compared to the previously used version in 3rd party
      implementations for verifying compatibility
    * Default value of UpdateInterval is now 20 instead of previous 30 seconds
* Fri Apr 26 2019 Martin Hauke <mardnh@gmx.de>
  - Verify source signature
  - Update to version 2.1
    Fixed:
    * --oneline could segmentation fault if database had total traffic values
      set but didn't have any daily or monthly traffic (Arch bug #60588)
    * No proper error message was produced when querying interface which didn't
      exist in the database
    * Daemon:waittimesync_does_not_wait_with_new_interfaces test was failing if
      the system used a time zone with a negative numeric value
    * Traffic estimate and average rate for ongoing month was not being
      calculated correctly when MonthRotate had a value greater than 1
    * Accuracy of traffic estimate and average rate for the ongoing month could
      be slightly skewed depending on the used time zone
    New:
    * Remove possible PollInterval and UpdateInterval drift over time
    * Sync SaveInterval to full minutes
  - Update to version 2.0
    Fixed:
    * Data rate calculations when using SI decimal prefixes
    * Workaround for filled arcs not drawn correctly with some versions
      of libgd (libgd/libgd#351)
    New
    * C struct dump database has been replaced with sqlite database,
    * full data import included from legacy databases of versions 1.3 - 1.18
    * User configurable data retention durations for all resolutions with
      following changed defaults:
      v1.18     v2.0
      5 minutes     n/a      576   (48 hours)
      hours          24       96   (4 days)
      days           30       62   (2 full months)
      months         12       25   (2 full years)
      years         n/a      all
      top days       10       20
    * Option to select units to use SI decimal prefixes using calculations
      with powers of 1000 (IEC and JEDEC prefixes use powers of 1024)
    * Yearly and 5 minute resolution statistics
    * Pebibyte and exbibyte support
    * Options the configure the length of each list output
    * Option to limit the length of --json and --xml outputs
    * Hourly list output replaces the hourly graph when the -h parameter is used
    * Hourly graph is accessible with -hg / --hoursgraph parameter
    * Options -b / --begin and -e / --end for specifying query time range
    * Configuration comes with ISO 8601 date formats as new defaults
    Removed
    * Weekly output
    * Merge of data from multiple interfaces to one output
    * --testkernel
    * --exportdb, use --oneline, --json or --xml instead
    * --importdb, -u / --update and related options using vnstat command
    * Old style (default in versions up to 1.7) summary layout in image output
* Thu Apr 11 2019 Dirk Stoecker <opensuse@dstoecker.de>
  - Don't use new systemd service options for system below 235 (systemd234.patch)
* Wed Jan 23 2019 Mathias Homann <Mathias.Homann@opensuse.org>
  - Update to 2.1
    2.1 / 6-Dec-2018
    * Fixed
    * --oneline could segmentation fault if database had total traffic values
      set but didn't have any daily or monthly traffic (Arch bug #60588)
    * No proper error message was produced when querying interface which didn't
      exist in the database
    * Several typos and spelling mistakes in documentation
    * Daemon:waittimesync_does_not_wait_with_new_interfaces test was failing if
      the system used a time zone with a negative numeric value
    * Traffic estimate and average rate for ongoing month was not being
      calculated correctly when MonthRotate had a value greater than 1
    * Accuracy of traffic estimate and average rate for the ongoing month could
      be slightly skewed depending on the used time zone
    * New
    * Remove possible PollInterval and UpdateInterval drift over time
    * Sync SaveInterval to full minutes
    2.0 / 21-Oct-2018
    * Fixed
    * Data rate calculations when using SI decimal prefixes
    * Workaround for filled arcs not drawn correctly with some versions
      of libgd (libgd/libgd#351)
    * New
    * C struct dump database has been replaced with sqlite database,
      full data import included from legacy databases of versions 1.3  * 1.18
    * User configurable data retention durations for all resolutions with
      following changed defaults:
      v1.18     v2.0
      5 minutes     n/a      576   (48 hours)
      hours          24       96   (4 days)
      days           30       62   (2 full months)
      months         12       25   (2 full years)
      years         n/a      all
      top days       10       20
    * Option to select units to use SI decimal prefixes using calculations
      with powers of 1000 (IEC and JEDEC prefixes use powers of 1024)
    * Yearly and 5 minute resolution statistics
    * Pebibyte and exbibyte support
    * Options the configure the length of each list output
    * Option to limit the length of --json and --xml outputs
    * Hourly list output replaces the hourly graph when the -h parameter is used
    * Hourly graph is accessible with -hg / --hoursgraph parameter
    * Options -b / --begin and -e / --end for specifying query time range
    * Configuration comes with ISO 8601 date formats as new defaults
    * Removed
    * Weekly output
    * Merge of data from multiple interfaces to one output
    * --testkernel
    * --exportdb, use --oneline, --json or --xml instead
    * --importdb, -u / --update and related options using vnstat command
    * Old style (default in versions up to 1.7) summary layout in image output
* Wed May 23 2018 liedke@rz.uni-mannheim.de
  - Update to 1.18
    * Fix: Misspellings, compiler warnings and possible error situations
      (pull requests by Christian Göttsche)
    * Hardening added to examples/systemd/vnstat.service
      (pull request by Christian Göttsche)
    * Add RTC sanity check and sync wait to daemon startup, the possible wait
      duration can be configured using the TimeSyncWait keyword
    * Add optional parameter to --oneline output for forcing fields to output
      in bytes
    * Add --json support for -l / --live and -tr outputs
    * Number of decimals used in outputs can be configured using DefaultDecimals
      and HourlyDecimals
    * Add section separators for improving readabilty of the vnstat -h output,
      configurable using HourlySectionStyle

Files

/etc/sysconfig/network/if-down.d/20-vnstat
/etc/sysconfig/network/if-up.d/20-vnstat
/etc/sysconfig/network/scripts/vnstat
/etc/vnstat.conf
/usr/bin/vnstat
/usr/bin/vnstat-create-db
/usr/lib/systemd/system/vnstatd.service
/usr/sbin/rcvnstatd
/usr/sbin/vnstatd
/usr/share/doc/packages/vnstat
/usr/share/doc/packages/vnstat/CHANGES
/usr/share/doc/packages/vnstat/FAQ
/usr/share/doc/packages/vnstat/README
/usr/share/doc/packages/vnstat/UPGRADE
/usr/share/licenses/vnstat
/usr/share/licenses/vnstat/COPYING
/usr/share/man/man1/vnstat.1.gz
/usr/share/man/man5/vnstat.conf.5.gz
/usr/share/man/man8/vnstatd.8.gz
/var/lib/vnstat


Generated by rpm2html 1.8.1

Fabrice Bellet, Fri Nov 19 23:17:08 2021