Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

spax-1.6.1-44.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: spax Distribution: openSUSE Tumbleweed
Version: 1.6.1 Vendor: openSUSE
Release: 44.1 Build date: Sat Sep 4 22:38:50 2021
Group: Productivity/Archiving/Backup Build host: obs-arm-11
Size: 54984 Source RPM: schily-2021.09.01-44.1.src.rpm
Packager: http://bugs.opensuse.org
Url: http://cdrtools.sourceforge.net/private/cdrecord.html
Summary: Portable Archive Exchange
pax is an archiving utility specified by POSIX.1-2001. The format is
basically tar, but with additional extended attributes.

Provides

Requires

License

CDDL-1.0

Changelog

* Wed Sep 01 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.09.01
    * smake: The man page now better describes pattern macro
      replacement.
  - Drop schily-stksz.diff (resolved upstream)
* Sun Aug 15 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.08.14
    * A new test was added to check whether SIGSTKSZ is a constant.
    * smake: While expanding the right side of a macro assignment with
      the operators :::= and +:=, smake no longer expands $$ to $, but
      rather leaves $$ untouched.
    * smake: The dynamic macros $? and $^ now work for implicit rules
      as well.
  - Add schily-stksz.diff
* Sat Jul 31 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.07.29
    * Bourne Shell: "cd -" now prints the new directory,
      required by POSIX.
    * star: A single Linux xattr entry with a zero length value did
      disable all Linux xattrs for the related file. This is now
      handled correctly.
    * ved: ved maxll=79 now checks whether the cursor is > column 79
      before entering a new line character.
    * ved: ved now aborts the startup if it turns out to be connected to
      a hardcopy terminal.
* Tue Jun 08 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.06.07
    * Manpage updates
* Thu May 20 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.05.19
    * Bourne Shell: The "ERR" trap is now also triggered in case that
      the error is of type "command not found" or "cannot execute".
    * Bourne Shell: the fc(1) builtin now handles "fc -l -0" the same
      way as ksh does and refers to the current command. Before, only
      "fc -l -1" did work to select the previous command.
* Tue May 04 2021 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2021.04.21
    * Bourne Shell: The new version no longer aborts with an
      illegal multi byte sequence as "no match". As a result, the
      "*" now again matches any filename - even if the filename
      contains an illegal multi-byte sequence.
    * SunPro Make: The new operators :::= and +:= have been
      introduced.
* Thu Nov 26 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.11.25
    * libhfs_iso: changed malloc() to calloc() to avoid
      uninitialized data.
    * ved: A new colon command (ESC : vhelp) has been added.
  - Remove fix_junk_in_partition.patch (upstreamed)
* Fri Nov 20 2020 Adam Majer <adam.majer@suse.de>
  - fix_junk_in_partition.patch: Initialize memory that created the
    partition table instead of writing random bytes to it (bsc#1178692)
* Sat Nov 07 2020 Jan Engelhardt <jengelh@inai.de>
  - Move ctags to update-alternatives scheme.
* Thu Nov 05 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.11.04
    * Bourne Shell: If a background job did finish during an
      implicit wait for a foreground job, the exit code for the
      background job was lost, which was fixed.
    * star: ACLs and Linux xattrs did not work if the path name to a
      file was longer than PATH_MAX, which was fixed.
* Fri Oct 09 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.10.09
    * Bourne Shell: The "wait" builtin is now POSIX compliant and
      returns 127 in $? in case that a process id to be waited for
      does not exist.
    * Bourne Shell: The exit code retrieved by $/ no longer is
      masked by 0xFF when this code originates from a wait(1) call.
    * Bourne Shell: The exit code from background jobs is now kept
      until the builtin wait(1) is called.
* Wed Sep 23 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.09.22
    * SCCS: delta now supports to handle nul bytes in the
      diff(1) output.
    * SCCS: delta now supports nul bytes in the new version of the
      input file if processing SCCSv6 history files.
    * SCCS: delta now by default uses `fsdiff` instead of `bdiff`.
    * SCCS: delta, if called as `delta -d ...`, now calls diff(1)
      with the option -a.
* Sat Sep 05 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.09.04
    * sccs: get(1) and delta(1) now restore the removed newline at
      the end of the last line if this was a SCCSv6 "^ANxxx" line
      to support files not ending in a newline.
    * sccs: The delta(1) command now correctly handles deltas where
      the last difference hits the end of the history file.
    * sccs: The delta(1) command now removes the e.file in case of
      an error abort.
* Thu Aug 13 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.08.12
    * star: GNU cpio archives may contain longer path names than
      permitted by the AT&T documentation, problems with which
      where fixed.
    * sccs: sccslog again allows ovelapping delgets and now allows
      overlapping delget groups to be correctly detected as commit
      bundle.
* Sun Jul 19 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.07.18
    * star: star could dump core if it was used as `star -t ...` or
      `star -x ...` while being in a UTF-8 based locale and trying
      to deal with extremely long pathnames (more than PATH_MAX) in
      the archive.
    * fifo: the fifo command is based on the star FIFO code and has
      been changed to support a FIFO size > 2 GB as well.
* Fri Jul 03 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.07.01
    * star: Backslashes are now honored when looking for the
      substitution separators in options like -s /from/to/ or
    - pax-s /from/to/
    * cdda2wav: The default for the CDDB database has been changed
      to gnudb.gnudb.org, as freedb.freedb.org has shutdown.
    * Full support for SCCSv6 history files.
    * SCCS: A new sccs(1) subcommand "histfile" has been
      implemented.
    * SCCS: admin fixed a potential buffer overflow related to the
      user (programmer) name that is used in the delta table.
* Fri Jul 03 2020 Jan Engelhardt <jengelh@inai.de>
  - Run tests after build.
* Tue Jun 09 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.06.09
    * star: A new option -one-file has been added that causes star
      to exit after a single file has been extracted as a result
      from a pattern match or command line argument match.
    * star: A new option iskip=# has been introduced. The argument
      is the number of bytes to skip before looking for the first
      archive header in the first tape block read after star
      started.
    * star: A new option mtskip=# has been introduced. This option
      causes star to issue a "mt fsr xxx" equivalent on a tape
      archive.
* Tue May 26 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.05.25
    * mkisofs: Fixed an integer overflow bug in mac_label.c with
      Apple -chrp boot.
    * star: The subst command for pax now supports the \1, \2, ...
      escapes for \(...\) selections in the from pattern, like it
      is used by sed(1).
    * star: A new subst option -pax-s has been added that supports
      sed(1) like substitutions. The old option -s continues to
      support change(1) like substititions.
    * SCCS: A new option -X0 has been introduced to allow to use
      nul byte separated file names on stdin when using the file
      argument "-".
    * SCCS: The commands sccslog and sccscvt now also support the
      argument "-" as a directive to read filenames from stdin.
    * SCCS: `sccs init` now by default creates an empty changeset
      history file with release 1.0 as
      $SRC_ROOT/.sccs/SCCS/s.changeset This signals SCCS to work in
      project mode where a group of files is managed together and
      the version 1.0 allows the first proect release to become
      1.1.
    * SCCS: `sccs init -s` now allows to initialize a directory
      tree without creating a $SRC_ROOT/.sccs/SCCS/s.changeset
      history file. This signals SCCS to work in single file mode.
  - Drop large_mac_iso.patch (merged)
* Wed May 13 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.05.11
    * SCCS: the "sccs root" command now checks for too many
      arguments and only allows zero or one path arguments.
    * mkisofs: README.eltorito has been enhanced to mention
      "-boot-load-size" and "-eltorito-platform efi".
    * isoinfo: Identifying an EFI boot record has been added to
      mkisofs. Isoinfo is now able to print "efi" instead of the
      unexpected "Unknown arch".
* Mon May 11 2020 Adam Majer <adam.majer@suse.de>
  - mkisofs: fix integer overflow in partition table calculation
    when chrp-boot is enabled and a large ISO image is created.
    (large_mac_iso.patch, bsc#1169420)
* Wed Apr 29 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.04.18
    * smake: A new option -a has been added. This option allows to
      tell smake not to set up the automake specific make macros
      MAKE_ARCH, MAKE_OS and similar.
* Sat Mar 28 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.03.27
    * mkisofs: A new option -noatime has been introduced in order
      to use the modification time of the files instead of the last
      access time.
    * mkisofs: New options -creation-date, -effective-date,
    - expiration-date have been introduced in order to use the
      supplied time stamp instead of the current time in the PVD.
    * mkisofs: A new option -reproducible-date has been added. This
      option sets -creation-date, -modification-date,
    - effective-date and -noatime at the same time and helps to
      make usage easier.
    * Bourne Shell: The case statement now supports the alternate
      end case symbol ";;&" that has been introduced by bash. If
      ";;&" is used instead of ";;", the next pattern list is
      evaluated and if there is a match, the related command list
      is executed.
* Mon Mar 16 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.03.11
    * Bourne Shell: set -m now works in scripts as well. Before,
      bosh did never call startjobs() when the shell startup was
      done with a shell script.
    * Bourne Shell: The shell now supports the alternate ;& switch
      command limiter in addition to ;; where ;& implements a
      fallthrough to the next command list regardless on thether
      there is a match or not.
* Wed Feb 12 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2020.02.11
    * Bourne Shell: A new variable ${.sh.path} returns the absolute
      path of the binary associated to the exec() for this shell.
    * Bourne Shell: `for i in; do cmd ...; done` is now valid
      syntax even though this is useless.
    * SCCS: comb.c now puts the filename in the created shell
      script in single quotes.
    * SCCS: comb.c now forbids single quotes and backslashes in
      filenames as they would cause problems with the shell script
      created by comb.
* Tue Feb 04 2020 Jan Engelhardt <jengelh@inai.de>
  - Set -fcommon [boo#1160291].
* Sun Jan 12 2020 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2019.12.05
    * libschily: the function getargs() and similar (from the
      option parser group) now support an extended format
      specifier: Previously, %0 and %1 have been supported, now all
      single digit numbers %0..%9 are supported.
    * libfind: The functions fetchdir()/dfetchdir(), sortdir(),
      cmpdir() now use size_t instead of int for the entry number
      count and the allocated size.
    * star: The new-volume-script= script is now called at the end
      of _every tape_, even at the last one. This now allows to
      have a script that automatically renames a standard archive
      name into numbered archive names when a tree should be
      splitted into chunks.
    * star: In "pax" command line mode, star now uses -no-fsync as
      default.
* Wed Nov 20 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to relesae 2019.11.11
    * star: When using star -copy, the default is now
    - no-secure-links. This is what users like since they are
      copying their own data that per definition cannot be
      untrusted external data.
    * star: star -diff is now "more smooth" to use, when the
      archive type is GNU TAR and the "atime" or "ctime" properties
      are not present for a specific file. Before, Jan 1 1970 was
      the assumed time in the archive.
    * star: star -diff now prints a diff statistics summary.
    * SCCS: Added a new delta type 'U' that allows to tell get(1)
      to remove the g-file. Such SCCS history files are going to be
      used as placeholders for removed files in the upcomming
      project mode.
    * SCCS: admin now has a new option -Xunlink. It can be used
      together with -n to create special SCCS history files that
      remove the g-file on extraction if a delta is to be extracted
      that is of type 'U'.
    * SCCS: get now honors delta table entries that use the new 'U'
      delta type and removed non-writable g-files on extraction.
      This feature only works if the history file is in SCCS V6
      mode.
    * SCCS: a new option -Xmail=address allows admin(1) and delta(1)
      to add an email address to the delta meta data.
* Sat Oct 26 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2019.10.25
    * libfind: The recent changes to support "find dir/name -name
      name" did not work with -depth because the name base index
      needs a reset after processing the directory content.
* Tue Oct 08 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to release 2019.10.07
    * Fixed infinite recursion of following symlinks in libschily/resolvepath.c.
    * smake: The error message for failed shell commands has been
      modified to "Code %d (%s) from command line..." in order to
      cause less confusion with the text printed by smake.
    * bosh: introduced shared memory to be able to forward the
      special exit cause (NOTFOUND or NOEXEC) to the parent even in
      case it used fork() instead of vfork().
    * bosh: Added support for a new automatic parameter "$/" to
      complement the existing parameter "$?".
    * star: The option -no-secure-links now may be configured as a
      global default via the tag STAR_SECURE_LINKS= in the file
      /etc/default/star and as a private default via an environment
      of the same name.
* Sat Aug 24 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.08.13
    * mkisofs: The struct attrinfo in apple.h has been enhanced by the
      struct members objid_low, objid_high, rsrc_length.
* Mon Aug 12 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.07.22
    * The smake man page now mentions -N,-T,-u,-w,-j,-m-R
    * smake: fixed a potential crash when printing current directory
    * smake: implemented the -C option for gmake compatibility
* Thu Jul 11 2019 Dominique Leuenberger <dimstar@opensuse.org>
  - Disable LTO: mkisofs makes weird memory accesses otherwise
    (boo#1141188).
* Fri Jun 14 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.06.13
    * cdrecord: The manpage now lists all supported media types and
      which media types are preferred over others.
    * star 1.6.1: fixed a bug in the FIFO code where star reported "star:
      Implementation botch: with FIFO_MEOF" as the tar side of the
      FIFO did sometimes not wait for the FIFO_IWAIT state when
      called as "star -multivolume -tv f=... f=... ..."
    * bsh: When expanding file names, the directory entries "." and
      ".." are now skipped and not part of the results. This is to
      make bsh to behave similar to the Bourne Shell with respect
      to globbing.
* Sun Jun 02 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.05.28
    * SCCS: man page and help text updates
* Thu May 02 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.04.29
    * cdda2wav: The read Fallback-C2 funcion that tries to read
      with the better Sony SCSI commands did not correctly fall
      back to the MMC-C2 read function, which has been fixed.
    * readcd: a new option spt=# allows to limit the number of
      sectors per transfer for testing purposes.
    * Bourne Shell: "trap -- ..." now correctly handles "--" even
      if the next argument is "-".
    * Bourne Shell: trap now supports a new option -p that allows
      to restore the whole trap state.
* Mon Apr 01 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.03.29
    * Bourne Shell: "readonly", "export" and "local" now expand
      the tilde.
    * star: several forgotten fields of the tar header now support
      base-256 encoding.
    * star: support for new BSD and Linux file flags has been added.
    * star: The old star format no longer causes a warning when
      plain files from *BSD are imported on a UNIX with contiguous
      minor device bits.
    * star: Support for the "lzma" and "freeze2" compression has
      been added.
* Sat Mar 16 2019 Jan Engelhardt <jengelh@inai.de>
  - Add Conflict markers for file-based conflicts identified
    by repo-checker.
* Fri Mar 15 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.03.11
    * star: Support for base-256 numbers in timestamps and UID/GID
      has been added. This has been planned in the 1990s already,
      when star invented the base-256 coding, but it has been
      forgotten in favor of the POSIX.1-2001 enhanded archive
      headers. Now it seems that GNU tar that copied the format
      from star uses it for timestamps and UID/GID and we need to
      implement it in order to get archive compatibility.
    * star: star did print archives with illegal 32 byte user/group
      names (where the NUL terminator is missing) "correctly", when
      in list mode but it used only the first 31 bytes when
      extractig such archives.
    * star: Creating multi volume archives without using the FIFO
      did dump core.
    * star: Creating multi volume archives without POSIX.1-2001
      support no longer sets POSIX.1-2001 extension flags for the
      volume header.
* Wed Feb 20 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.02.18
    * star 1.6: Two more FIFO problems (mainly visible on Linux)
      have been fixed.
* Thu Jan 24 2019 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2019.01.22
    * star: fixes for a hang and pipe reading issues
    * star: The debug printing for the FIFO has been enhanced to
      print more information from the FIFO control structure to
      debug problems like the ones mentioned above.
    * star now ignores SIGPIPE.
* Thu Dec 06 2018 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2018.12.06
    * sccs-prs now prints the SCCS v6 initial path using the new
      keyword :Gp:.
    * sccs-prs now prints the SCCS v6 unified random using the new
      keyword :Gr:.
    * sccs: libcomobj: A parser for the SCCS v6 flags has been added.
    * sccs: libcomobj: A parser for SCCS v6 global meta data has
      been added.
  - Package sccs.
* Sun Nov 25 2018 Jan Engelhardt <jengelh@inai.de>
  - Package bsh, pfbsh symlinks.
* Fri Nov 23 2018 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2018.11.22
    * include/schily/getopt.h: A new include file has been created
      for our libgetopt that includes an enhanced getopt()
      implementation.
    * libschily: resolvenpath() did not work as expected when some
      path names do not exist. A stat() call that should check
      whether we already reached the "/" directory caused a return
      (-1) even with (flags & RSPF_EXIST) == 0. This bug caused
      star to classify more symlinks as dangerous than needed.
  - Remove schily-linker.diff (resolved upstream)
* Thu Nov 08 2018 Jan Engelhardt <jengelh@inai.de>
  - Trim SELINUX from schily-2018-05-25_star_configuration.patch,
    it is already determined by %configure now.
* Tue Nov 06 2018 Jan Engelhardt <jengelh@inai.de>
  - Update to new upstream release 2018.10.30
    * bsh/Bourne Shell/star: a very long path name could cause a
      core dump with a "chdir()" operation in some cases.
    * star: "star -c H=exustar -pax-o binary" now correctly results in
      unencoded strings for uname/gname/path/linkpath.
    * star: a new option -no-secure-links allows to disable the secure
      default behavior.
    * Changes to libfind options like -mount/-xdev and -perm;
      for details, see the AN-* files in the documentation directory.
    * New libfind primaries -chatime, -chctime, -chfile, -chown, etc.
      see AN-* for details.
    * star: Added "volatile" to a selection of struct members in
      struct m_head. This should help to avoid specific
      optimization from newer compilers that could cause problems
      with the synchronization of the fifo.
    * star: make sure that "star -c" results in a non-zero exit
      code if it is interupted by Ctrl-C.
    * star: Added new code to allow to debug a hanging FIFO.
    * star: the path name length and the link name length are now
      set from the POSIX 2001 extended tar headers in case that a
      name appears in that extended meta data.
  - Removed schily-2018-05-25_star_lock.patch (no longer needed).
  - Added schily-linker.diff.
  - Add smake and ved subpackages.
* Wed Aug 29 2018 jengelh@inai.de
  - Update to new upstream release 2018.08.24
    * star: SELinux support has been added.
    * star: dotdot atacks are now also detected if they are based
      on DOS filesystem semantics.
    * star: Added a new check for the exit code of the compress
      program.
    * star: A hard EOF on input now results in a non-zero exit code.
    * star: Now defaults to use "ssh" for the remote tape interface.
    * star: There is now a way to make -no-fsync the default
      behavior to avoid slow operation on platforms with slow
      buffer cache.
    * librmt: added a way to configure the remote shell and the
      remote tape server path.
    * star: support for unlimited file path length.
    * libschily: a new set of gt*() and fgt*() functions with
      gettext() support have been added.
    * Bourne Shell: avoid a core dump with missing HOME.
    * libfind: added a new primary "-call" that allows to call back
      into the program instead of calling exec().
    * libfind: new primaries -newerat, -newermt, -newerct.
  - Remove schily-2018-05-25_star_detect_gzip_failures.patch,
    schily-2018-05-25_star_use_ssh_by_default.patch,
    schily-2018-05-25_star_no_fsync.patch,
    schily-2018-05-25_star_selinux.patch
    (merged upstream)
  - Remove schily-2018-05-25_star_mk.patch (no longer needed)
* Wed Aug 29 2018 jengelh@inai.de
  - Drop Conflicts against cpio-mt/tar-rmt, since update-alternatives
    is used as an arbitraring mechanism.
  - Add Provides: mt, rmt.
* Sun Aug 19 2018 bwiedemann@suse.com
  - Run make config before build instead of in the middle,
    to have reproducible builds (boo#1102408)
* Wed Jun 06 2018 jengelh@inai.de
  - Remove schily-2018-05-25_star_bufferoverflow.patch
    (the bug is long gone, the patch has no effect)
* Tue Jun 05 2018 kstreitova@suse.com
  - add patches from the star package
    * schily-2018-05-25_star_configuration.patch
    * schily-2018-05-25_star_no_fsync.patch
    * schily-2018-05-25_star_lock.patch
    * schily-2018-05-25_star_detect_gzip_failures.patch
    * schily-2018-05-25_star_bufferoverflow.patch
    * schily-2018-05-25_star_use_ssh_by_default.patch
    * schily-2018-05-25_star_mk.patch
    * schily-2018-05-25_star_selinux.patch
  - add missing BuildRequires for star:
    * autoconf (because of selinux patch)
    * libacl-devel
    * libattr-devel
    * libselinux-devel
    * libtool
  - install README-FIRST (as schily-rmt) documentation
  - add noreplace for %_sysconfdir/default/rmt and
    %_sysconfdir/default/star
  - move srmt from sbindir to bindir
  - do not ship star_sym and suntar
* Mon May 28 2018 jengelh@inai.de
  - Update to new upstream release 2018.05.25
    * star: user name, group name, path and linkpath are now
      automatically added to the POSIX.1-2001 extended header in
      case that they include non-ASCII characters (outside the
      7-bit range).
  - Remove gccwarns.diff (fixed upstream), gcc48wa.diff (we no
    longer have gcc-4.8)
* Thu May 17 2018 jengelh@inai.de
  - Update to new upstream release 2018.05.17
    * smake: Now using TYPE_MAXVAL(time_t) in gnewtime() instead of
      the method from 1996, to work around a problem with gcc-8.1
      and clang-6.0.
    * mkisofs: The link count computation did incorrectly count all
      directory entries for large (multi extent) files. This
      resulted in a link count that was "real number" + (sizeof
      file / 2GB)
    * mkisofs: File meta data for UDF directories that refer to a
      Rock Ridge relocated directory had been emitted as all
      zeroes.
    * star: nanosecond timestamp support
    * libfind: nanosecond timestamp support
    * star: Added a new archive format "epax". This is the same as
      "pax", but it always includes a POSIX.1-2001 extended header
      with timestamps with nanosecond resolution.
* Wed May 16 2018 jengelh@inai.de
  - Update to new upstream release 2018.05.02
    * bsh: fixed a NULL deref when the file content was "#!"
    * bsh: Avoid a coredump from expressions like
      "$2222222222222222222" that cause an integer overflow while
      converting the number.
    * mkisofs: fixed crash during Joliet info creation
    * Better support for Address Sanitizer
    * (s)patch: CVE-2018-1000156 was fixed
    * star: star -diff is now able to compare nanoseconds in
      timestamps.
  - Drop mkisofs-j-crash.diff (fixed upstream)
  - Add gccwarns.diff to address some undefined behavior.
* Tue May 08 2018 jengelh@inai.de
  - Add update-alternatives handling for (s)rmt and (s)mt
* Tue May 08 2018 jengelh@inai.de
  - Add spax and star subpackages
* Wed Apr 11 2018 jengelh@inai.de
  - Add iconv-name.diff; rename cp10000 to macintosh to workaround
    glibc [boo#1089126]
* Wed Apr 04 2018 jengelh@inai.de
  - Add mkisofs-j-crash.diff
* Thu Mar 22 2018 jengelh@inai.de
  - Move to schily-2018.03.16 source tarball
    * mkisofs and smake moved their config files to /usr/share/lib.
    * smake: when an implicit target is made, the result is now
      searched in the list of obj-directories.
  - Drop fix_chrp_boot.patch (applied upstream)
  - Use cdrecord.spec as a base for schily.spec. The subsequent
    changelog entries are from cdrecord.changes.
* Mon Mar 12 2018 adam.majer@suse.de
  - fix_chrp_boot.patch: chrp-boot option doesn't take any parameters
    but seems to require one that it doesn't use. Fix it uses no
    parameters. (bnc#1084893)
  - Always install to /usr/lib/siconv since otherwise mkisofs doesn't
    find charsets. Needs to be fixed properly later. (bnc#1084892)
* Thu Dec 14 2017 jengelh@inai.de
  - Update to new upstream release 3.02~a09
    * Cdda2wav now works around a Linux glibc bug that causes stderr
      to be illegally buffered.
    * `cdda2wav -vall` no longer clobbers out-fd= to become stdin
      when compiled in 64 bit mode.
* Thu May 11 2017 adaugherity@tamu.edu
  - Fix build on older distros (e.g. SLE11) -- no caps support in RPM
  - Remove build dependency on mmv (not present on SLE, and its usage
    is easily replaced with a small shell script).
  - Fix build on older distros (makedepend)
* Wed Dec 28 2016 jengelh@inai.de
  - Update to new upstream release 3.02~a07
    * mkisofs: deduplication for files)
* Thu Jan 28 2016 jengelh@inai.de
  - Update to new upstream release 3.02~a06
    * libscg: fixed a copy/paste problem in the Linux transport that
    could cause libscg to assume a timeout when no timeout occurred.
    * libscg: add a new generic option interface.
    * libscg: New option "ignore-resid" to work around a Linux kernel
    problem.
    * mkisofs: better warning messages for rotten directories when in
    multi-session mode.
* Thu Dec 31 2015 jengelh@inai.de
  - Update to new upstream release 3.02~a05
    * mkisofs now tries to be more immune against rotten iso images
    when in multi session mode.
    * mkisofs no longer tries to access a string past the null byte
    when dealing with Joliet.
    * mkisofs fixed a bug related to sorting with multi extent files
    (greater than 4 GB).
* Wed Dec 16 2015 jengelh@inai.de
  - Update to new upstream release 3.02~a04
    * Support for DVD-Audio was added to mkisofs.
    * Several bug fixes in mkisofs and mkisofs/diag/* programs to make
    them more robust against rotten ISO images.
* Wed Dec 02 2015 jengelh@inai.de
  - Update to new upstream release 3.02~a03
    * isoinfo no longer eats up all memory when an ISO image
    with a directory loop is specified.
* Fri Nov 20 2015 jengelh@inai.de
  - Update to new upstream release 3.02~a02
    * Many smaller "isoinfo" enhancements including support for
    relocated directories.
* Fri Nov 06 2015 jengelh@inai.de
  - Update to new upstream release 3.02~a01
    * libparanoia: work around a bug that resulted from uninitalized
    statistics data for C2 checks.
    * cdda2wav now supports sound output on Linux again.
* Sun Aug 30 2015 jengelh@inai.de
  - Update to new upstream release 3.01
    * Final version
* Wed Aug 05 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a31
    * Added compile support for Win-10 using non-automake-aware make
    implementations. Add some workarounds for MinGW32 compilation.
* Wed Jul 08 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a30
    * Added a workaround (with autoconf) for a Cygwin bug with
    [#]pragma weak.
* Thu Jun 04 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a29
    * (Several changes for better Haiku compatibility.)
    * Some code fixes include results from automated tests.
* Wed Mar 25 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a28
    * Build system changes only: manpages are installed just once
* Thu Feb 19 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a27
    * dlopen emulation for certain platforms
* Fri Jan 09 2015 jengelh@inai.de
  - Update to new upstream release 3.01~a26
    * Add the HELIOS UNICODE mapping code. This needs to be done at
    UCS-2 level for Joliet and UDF (instead of UTF-8) and only for
    Rock Ridge (in case of a UTF-8 based target locale) using UTF-8
    based translations.
    * Make the Apple extensions work again with "mkisofs -find"
* Thu Dec 04 2014 meissner@suse.com
  - run permission handling code unconditionally. bnc#899718
* Sat Nov 29 2014 jengelh@inai.de
  - Update to new upstream release 3.01~a25
    * Precursory work for localization
  - Run spec-beautifier for spec files
  - Reenable missing capability support [bnc#899718]
* Mon Sep 22 2014 jengelh@inai.de
  - Update package metadata: new upstream URLs
  - Remove untracked old changes file
* Wed May 07 2014 jengelh@inai.de
  - Update to new upstream release 3.01~a24
    * isoinfo now allows the user to extract all files from an ISO
    image based on the built-in find(1) command. This works even for
    milti-extent files (files > 4 GB).
    * Some enhancements for the libschily *at() function emulations
    have been added.
* Wed Mar 05 2014 jengelh@inai.de
  - Update to new upstream release 3.01~a23
    * Cdrecord now prints timediffs also in hours:minutes:seconds.
    * Cdda2wav no longer includes "c2check" in the "proof" paranoia
    option to avoid a firmware bug in a TSSTcorp drive.
    * Mkisofs has slightly-reduced CPU time requirements.
    * A problem in isoinfo has been fixed; it did not always print
    timestamps in `-find -ls` mode.
* Tue Jan 21 2014 jengelh@inai.de
  - Update to new upstream release 3.01~a22
    * mkisofs includes a new option, -legacy, that allows it to
    reenable the short options -H/-L/-P; these have been disabled in
    2006 for compatibility with scripts that have not been updated
    during the past 10 years.
    * libsiconv now only tries to open a file when the argument
    includes a slash in its name.
    * libschily::printf() now includes support for %n$ argument
    reordering for the first 30 arguments.
  - Drop ppc64le.patch (merged upstream)
* Mon Jan 06 2014 jengelh@inai.de
  - Update to new upstream release 3.01~a21
    * This release adds some workarounds for compiling with MinGW. New
    functions xcomerr(), xcomerrno(), fxcomerr(), and fxcomerrno() in
    libschily. A bug in libschily/format.c that caused %.*s to be
    printed incorrectly has been fixed. Some bugs in the mkisofs man
    page have been fixed.
* Thu Jan 02 2014 dvaleev@suse.com
  - enable ppc64le architecture (ppc64le.patch)
* Thu Dec 26 2013 jengelh@inai.de
  - Update to new upstream release 3.01~a20
    * libparanoia and cdda2wav have been enhanced to give much better
    results with slightly bad media and new hardware.
  - Enable symbol versions
* Tue Dec 03 2013 jengelh@inai.de
  - Update to new upstream release 3.01~a19
    * This release added different fine-grained privilege handling that
    keeps root privileges in cases where cdrtools have been called by
    a privileged program.
    * Libfind now supports "event port" type files.
    * Emulations for *at() functions have been added to libschily.
  - Mark the mkisofs program (combined work) as GPL-2.0 due to
    some GPL2-only sources (mkisofs/inode.c).
* Thu Nov 14 2013 jengelh@inai.de
  - Add gcc48wa.diff to work around broken gcc-4.8 behavior
* Tue Oct 15 2013 jengelh@inai.de
  - Update to new upstream release 3.01a18
    * This release fixes a copy+paste bug in the Linux support code for
    fine-grained privileges.
    * Libfind no longer leaks filedescriptors with -empty.
* Fri Oct 04 2013 jengelh@inai.de
  - Update to new upstream release 3.01a17
    * Automatic support has been added for ARMv5 and ARMv6.
* Thu Jul 11 2013 zawel1@gmail.com
  - Update to 3.01a16
    * libparanoia: memset() call in i_silence_match() now uses the
      correct size instead of sizeof (avec)
    * libparanoia: Use dynamic arrays instead of alloca()/malloc()
      if available
* Thu Jun 06 2013 jengelh@inai.de
  - Update BuildRequires, add License: fields, use %optflags, update
    descriptions and wrap at 70 cols
  - Remove unused static libraries and dissolve devel subpackage
    (now provided by libschily-devel, libscg-devel)
* Mon Jun 03 2013 jengelh@inai.de
  - Update to new upstream release 3.01~a15
    * This release warns about lack of fine-grained permissions
  - Temporarily deactivate extra permissions for factory submission
    while permissions package is not updated
* Tue May 14 2013 jengelh@inai.de
  - Add cdda2wav.{easy,paranoid,secure}. permissions.d entries need
    to be in the same package as the file they are describing, or we
    get errors during post-build verification.
  - Use tildeversion; according to author, 3.01a14 sorts before 3.01
  - Resync caps list from permissions.d files to .spec file
* Sun May 05 2013 meissner@suse.com
  - actually fscaps are also managed by "permissions", leave the
    %set_permissions calls in.
  - reenabled the sample permission snippets for testing.
* Sat May 04 2013 jengelh@inai.de
  - Do not run set_permissions when fscaps are in use
* Sat May 04 2013 meissner@suse.com
  - commented out the setuid root equivalent capabilities, cap_sys_admin
    and cap_dac_override. (bnc#550021)
  - commented out unnecessary and also dangerous cap_net_bind_service
    (bnc#550021)
  - add correct permission handling also for readcd and cdda2wav
* Fri May 03 2013 jengelh@inai.de
  - Linux fscaps support in the RPM package (bnc#550021)
* Fri May 03 2013 davejplater@gmail.com
  - Commented out permissions.d files and
    ran spec cleaner.
* Mon Apr 22 2013 zawel1@gmail.com
  - Update to 3.01a14
    * new autoconf tests for sys/capability.h and cap_*() functions
    from Linux -lcap
    * trying to support suid-root-less installation of cdrecord on Linux.
    NOTE: You need "file caps" support built into your Linux installation.
    * include/schily/stat.h now contains macros to set the nanoseconds
    in timestamps in a OS independent way
    * mkisofs now identifies itdelf by default (inside the APPID string)
    as being UDF capable.
    * mkisofs now supports additional file types with UDF: named pipes,
    sockets, character devices, block devices
    * mkisofs now supports all three UNIX times with microsecond granularity
      in UDF
    * mkisofs now sets correct user/group/permission for symlinks in UDF
    * mkisofs now supports setuid, setgid, sticky bits in UDF
* Tue Apr 02 2013 jengelh@inai.de
  - Dissolve Obsoletes cycle between cdrkit (source package "wodim")
    and cdrtools. Conflict tags have been submitted to cdrkit.
* Tue Feb 12 2013 zawel1@gmail.com
  - Update to 3.01a12
    * mkisofs: mkisofs now reserves more space for the file names
      to avoid a path buffer overrun
    * mkisofs: fixed a bug that caused to put more than one UDF
      direcory entry for a file in case that the file is a ISO-0660
      multi-segment file.
    * mkisofs: fixed a bug that caused the wrong start sector address
      to be used for UDF in case that the file is a ISO-9660
      multi-segment file and the -sort option was used.
    * libschily: libschily::fexecv() now allows to use the parameter
      "ac" with the value -1 to indicate that the arg count is to be
      determined by the NULL pointer at the end of the arg list
    * new include files include/schily/err_*.h are used to
      encapsulate #error CPP statements that would otherwise always
      prevent compilation with K&R compilers
    * mkisofs: new option -ignore-error alows to continue on some
      errors
    * mkisofs: Avoid a 32 bit integer overflow while computing sector
      addresses for Rock Ridge CE entries
* Mon Oct 01 2012 zawel1@gmail.com
  - Update to 3.01a08
    * introduce a dependency for man page subdirectories to allow
    syncing parallel make calls.
    * libschily: getperm.c now correctly supports umask +w
    * libscg & cdrecord: struct scsi_inquiry is now using a union
    around the vendor ID strings in order to avoid incorrect buffer
    overflow warnings from GCC-4.x
    * mkisofs: while introducing the new option -modification-date,
    we did accidently remove the code to set up the creation date
    in te PVD. Now creation date again contains correct data.
* Tue Mar 27 2012 davejplater@gmail.com
  - Update to version 3.01a07 Fixed non position independent build of
    cdrecord with "COPTX=-fPIE" and "LDOPTX=-pie -Wl,-pie"
* Mon Dec 26 2011 hnch@gmx.net
  - Disabled parallel build.
* Mon Dec 26 2011 hnch@gmx.net
  - Update to 3.01a06.
* Tue Jun 07 2011 davejplater@gmail.com
  - Update to 3.01a05 via source service.
* Wed Apr 06 2011 davejplater@gmail.com
  - Fixed provides, obsoletes and requires to stop cdrtools from
    requiring packages from wodim.
* Sat Apr 02 2011 asterios.dramis@gmail.com
  - Updated to 3.00
  - Spec file updates:
    * Changed the Name: entry to cdrtools and added cdrecord as a subpackage.
    * Changes based on rpmdevtools templates and spec-cleaner run.
    * Updates in Summary: and %description sections.
    * Removed meta package schily-cdrtools and used the main package for
      cdrkit-cdrtools-compat removal.
    * Added Conflicts: for cdda2wav and mkisofs (with icedax and genisoimage
      respectively).
    * Use smp_flags with make.
    * Updates in %install section. Most important:
      [#] Remove installed documentation and install it manually in the %files
      sections.
      [#] Install additional programs.
      [#] Don't run fdupes in /etc/permissions.d/ (some may want to have different
      contents in each file).
    * Updates in %files sections.
    * Removed the %changelog entries from the spec file.
* Sat Feb 12 2011 hnch@gmx.net
  - A lot of cleanup fixes in the spec file, e.g. corrected paths,
    added debuginfo. Thanks to Křištof Želechovski for the patches.
* Fri Nov 26 2010 hnch@gmx.net
  - Small fixes to satisfy rpmlint.
* Fri Nov 26 2010 hnch@gmx.net
  - Updated to 3.01a01
* Wed Jun 02 2010 hnch@gmx.net
  - Updated to final 3.00
* Thu Apr 15 2010 dmueller@suse.de
  - fix requires(pre) -> requires(post)
* Fri Apr 09 2010 hnch@gmx.net
  - Reinstalled Prerequisites as Requires(pre)
* Tue Apr 06 2010 hnch@gmx.net
  - Updated to 2.01.01a77
* Tue Feb 02 2010 hnch@gmx.net
  - Updated to 2.01.01a74
* Mon Jan 11 2010 hnch@gmx.net
  - Updated to 2.01.01a72
* Tue Jan 05 2010 meissner@suse.de
  - disable the permissions override
* Tue Dec 29 2009 hnch@gmx.net
  - Updated to 2.01.01a70
* Tue Dec 01 2009 hnch@gmx.net
  - Updated to 2.01.01a69
* Fri Nov 20 2009 hnch@gmx.net
  - Updated to 2.01.01a68
* Wed Nov 04 2009 hnch@gmx.net
  - removed /etc/permissions.d/ entries for readcd, rscsi and cdda2wav again
* Mon Nov 02 2009 hnch@gmx.net
  - removed conflicting Provides: from schily-cdrtools package
* Mon Nov 02 2009 hnch@gmx.net
  - Updated to a67
  - added /etc/permissions.d/ entries for readcd, rscsi and cdda2wav as well
* Mon Oct 26 2009 hnch@gmx.net
  - Once again permissions.d/ files, fixed spec file.
* Mon Oct 26 2009 hnch@gmx.net
  - Fixed wrong naming of permissions.d/ files.
* Sun Oct 25 2009 meissner@suse.de
  - import from henneodernich home repo
  - removed up %post illegal operation and instead drop in permission.d snippets
    4711 in easy mode, 0711 in secure and paranoid modes.
    added rpmlintrc to allow this temporarily
  - removed unused obsoletes
  - conflict with cdrkit-cdrtools-compat instead of obsoletes
  - alsa-devel buildrequires

Files

/usr/bin/pax
/usr/bin/spax
/usr/share/licenses/spax
/usr/share/licenses/spax/CDDL.Schily.txt
/usr/share/man/man1/spax.1.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Fri Dec 3 23:48:33 2021