Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

smp_utils-0.99-2.3 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: smp_utils Distribution: openSUSE Tumbleweed
Version: 0.99 Vendor: openSUSE
Release: 2.3 Build date: Thu May 27 12:40:24 2021
Group: Hardware/Other Build host: armbuild21
Size: 568540 Source RPM: smp_utils-0.99-2.3.src.rpm
Summary: Utilities for the SAS Management Protocol (SMP)
The smp_utils package contains utilities for the Serial Attached SCSI
(SAS) Management Protocol (SMP).  Most utilities correspond to a single
SMP function, sending out a request, checking for errors and if all is
well processing the response. The response is either decoded, printed
out in ASCII hexadecimal or sent as binary to stdout.




BSD-3-Clause AND GPL-2.0-only


* Wed Nov 11 2020 Jan Engelhardt <>
  - Add missing ldconfig calls for libsmputils1-1.
* Thu Apr 16 2020 Martin Pluskal <>
  - Update to version 0.99:
    - smp_discover(_list): add --dsn option to show
      device slot number in single line per phy summary
    - attached SAS device type, word SAS added (spl4r01)
    - add SAS connector types, shared with NVMe (ses3r8)
    - add buffered phy burst size field (spl4r07)
    - add attached apta capable field
    - update phy capabilities decode (spl5r02)
    - use Report general to get number phys rather
      than loop until an error occurs
    - smp_rep_general: add extended fairness field
    - add initial time to delay expander forward open
      indication field
    - add external port field (spl5r02)
    - smp_phy_test: change default linkrate from 3 to 6 Gbps
      which is value 0xa
    - smp_conf_phy_event: fix file pointer leak
    - add G5 (22.5 Gbps for SAS-4) settings [spl4r06]
    - convert many two valued ints to bools
    - smp_lib:
    - add smp_get_connector_type_str(), smp_get_num_nomult()
      and smp_get_llnum_nomult()
    - add dStrHexErr() and dStrHexStr()
    - add hex2stdout, hex2stderr and hex2str
    - add smp_is_big_endian(), smp_all_zeros() and
    - add sg_unaligned.h and sg_pr2serr.h headers
    - change connector name: 'SAS SlimLine' to 'SlimSAS'
    - sync with spl5r08
    - cleanup +
    - update BSD license from 3 to 2 clause aka FreeBSD
      license (without reference to FreeBSD project)
    - debian: bump compat file contents from 7 to 10
  - Drop no longer needed sysmacros.patch
* Wed Aug 01 2018
  - sysmacros.patch: Include <sys/sysmacros.h> for major/minor/makedev
* Wed Mar 25 2015
  - Update to version 0.98
    * add Linux aacraid support, interface name : aac
    - device name has form /dev/aac[N[,E_ID]]
    * smp_discover, smp_discover_list: in 1 line summary use
      routing attribute "U" instead of "T" if "table to
      table supported" set in report general response
    - output device slot (group) number if len > 109
    - add 'attached persistent capable' bit (spl3r2)
    - add pwr_dis_* fields (spl3r3)
    - add '--cap' option to decode phy capabilities
    - change 'end device' to 'SAS or SATA device'
    * smp_discover: '-mm' produces full output for each phy
    * smp_rep_broadcast: add broadcast type names
    * smp_general: add 'initiates ssp close' and 'ssp
      maximum connect time limit' fields (spl3r04)
    * add support for mpt3ctl (Linux LSI 12 Gbps HBAs)
    * change binary install from /usr/sbin to /usr/bin since
      sbin caused problems
    * examples folder scripts cleanup
    * make code more C11/C++ friendly
* Thu Jun 13 2013
  - Update to new upstream release 0.95
    * mpt: cope with mpt2 ioctl that uses a different magic number
  - Update to new upstream release 0.96
    * New utilities: smp_conf_zone_perm_tbl, smp_conf_zone_man_pass,
    smp_conf_zone_phy_info, smp_ena_dis_zoning, smp_rep_broadcast,
    smp_rep_phy_event, smp_rep_phy_event_list,
    smp_rep_self_conf_stat, smp_rep_zone_man_pass,
    smp_rep_zone_perm_tbl, smp_zone_activate, smp_zoned_broadcast,
    smp_zone_lock, smp_zone_unlock:
    * Allow specifying --phy= IDs up to 254
  - Update to new upstream release 0.97
    * New utilitiy: smp_conf_phy_event
    * Synchronize to SPL-2 r03
    * smp_rep_phy_event, smp_rep_phy_event_list: add --enumerate
    option to list Phy Event Source names
  - Now builds using autotools, changed %build/%install accordingly.
  - Remove smp_utils-Makefile.diff (no longer applicable),
    smp_utils-compile-fixes (no longer applies)
  - Simplify filelists. Remove redundant %clean section.
* Fri Mar 01 2013
  - license update: BSD-3-Clause and GPL-2.0
    See mptctl.h
* Thu Feb 28 2013
  - update license to new format
* Fri Sep 30 2011
  - cross-build fix: use %__cc macro
* Thu Mar 12 2009
  - Update to smp_utils-0.94 (bnc#483393)
    - smp_discover: sync to sas2r15
    - smp_discover_list: sync to sas2r15
    - smp_rep_general: sync to sas2r15
    - smp_rep_exp_route_tbl: sync to sas2r15
    - smp_lib: sync to sas2r15
    - sgv4: more detail in error messages
    - sgv4: drop scsi.h include, gives problems with lk 2.6.27
    - mpt: allow either /dev/mptctl or /dev/mpt2ctl [10;220-221]
    - warn if target SAS address is 0x00000000 when -v given
* Fri May 23 2008
  - using 'Provides' to clean update dependency



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Nov 30 23:41:30 2021