Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

smcroute-2.5.3-1.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: smcroute Distribution: openSUSE Tumbleweed
Version: 2.5.3 Vendor: openSUSE
Release: 1.1 Build date: Tue Sep 28 19:25:47 2021
Group: Productivity/Networking/Routing Build host: obs-arm-11
Size: 129549 Source RPM: smcroute-2.5.3-1.1.src.rpm
Packager: http://bugs.opensuse.org
Url: https://troglobit.com/projects/smcroute/
Summary: Static multicast routing for UNIX
SMCRoute is a UNIX/Linux tool to manage and monitor multicast routes.
It supports both IPv4 and IPv6 multicast routing.

SMCRoute can be used as an alternative to dynamic multicast routers like
mrouted or pimd in setups where static multicast routes should be
maintained and/or no proper IGMP or MLD signaling exists.

Multicast routes exist in the UNIX kernel as long as a multicast routing
daemon runs. On Linux, multiple multicast routers can run simultaneously
using different multicast routing tables.

Provides

Requires

License

GPL-3.0-only

Changelog

* Thu Sep 23 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5.3
    Changes
    * New tests to verify add/del of IPv4/IPv6 routes in kernel MFC.
    Fixes
    * Fix #166: build warning with gcc 10.2.1: "comparison is always
      true due to limited range of data type".
    * Fix build warning with --disable-mrdisc configure option.
    * Fix #167: cannot remove routes added with smcroutectl add,
      only affects add/del at runtime with smcroutectl, not .conf
      reload.
* Fri Aug 27 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5.2
    Changes
    * Allow installing routes with no outbound interfaces.
    * Reinitialize VIFs on reload in case of new interfaces.
    * Handle cases when interfaces change ifindex, i.e. they've first
      been * removed and then re-added with the same name.
    Fixes
    * Fix VIF leak when deleting interfaces with MRDISC enabled.
    * Fix handling when an (S,G) moves to another IIF. This fixes
      issues where the SMCRoute kernel cache was out of sync with
      the kernel MFC.
    * Fix handling of lost/disabled interfaces at reload. This fixes
      a couple of issues where routes were not updated properly at
      runtime.
    * Update interface flags on reload, this fixes issues when
      SMCRoute failed to detect interfaces that had their MULTICAST
      flag set or cleared at runtime.
    * Skip setsockopt() for IPC sockets. This fixes warnings in
      syslog about failing to disable MULTICAST_LOOP and
      MULTICAST_ALL.
* Sun Aug 22 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5.1
    Changes
    * Add .sha256 checksum to dist files, useful for packagers
    Fixes
    * systemd Notify integration, restore NotifyAccess=main
    * ftbfs on older compilers, e.g. gcc 4.8.3, use -std=gnu99
    * Fix Documentation refs in systemd unit file, new man pages
* Fri Aug 20 2021 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.5.0
    * Fully automated test suite with 15 tests covering many use
      cases.
    * Support for /etc/smcroute.d/*.conf .
    * Support for applying changes to .conf files without disturbing
      established flows -- i.e., seamless addition or removal of
      outbound interfaces in existing rules, or add/remove routes,
      without ever affecting other routes.
    * Support for route replacement/update smcroutectl.
    * Full (*,G) wildcard route matching, for IPv4 and IPv6.
    * Variant wildcard route matching with source and group range
      matching. This may of course waste a lot of resources, so
      handle with care:
      + (*,G/LEN), issue #135 (IPv4), and issue #162 (IPv6)
      + (S/LEN,G), issue #81
      + (S/LEN,G/LEN)
    * Full SSM/ASM group join support, for both IPv4 and IPv6.
      Including joining group ranges from both smcroutectl and
      .conf .
    * New command line option, -F file.conf to verify file syntax.
    * The -I NAME command line option has changed to -i NAME,
      compat support for the previous option remains.
    * The mrdisc flag to the phyint directive is now what solely
      controls the functionality per interface. Previously a
      mechanism to enable/disable the functionality (if enabled) if
      active routes were in place. However, this did not cover (*,G)
      routes so that has been removed to simplify and guarantee full
      function.
    * Output format from smcroutectl has been extensively changed.
      E.g, new /LEN support means wider columns, but heading have
      also changed.
    Fixes
    * Fix #120: failed ASM/SSM IGMP join if interface has no address
    * Fix #130: dynamic IPv6 routes are not flushed (like IPv4 (*,G))
    * Fix #149: (*,G) cache timeout callback stops, or never starts
    * Fix #151: same log entries
    * Fix #156: smcruotectl show does not show IPv6 routes
    * Fix stochastic timer behavior, e.g. mrdisc announcements
      experienced interference with the (*,G) cache timer
* Tue Feb 12 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 2.4.4
    Changes
    * Allow same outbound interface as inbound for routes, only warn user
    * systemd unit file hardening, recommended by Debian
    Fixes
    * IGMP header checksum missing from mrdisc frames
    * Unblock *all* matching, and currently blocked, (S,G) to a
      newly installed (*,G) route, only the first know was unblocked
    * Timer nanosecond bug causing loss of address refresh on DHCP
      interfaces.  Interface monitoring feature introduced in v2.4.3
    * Calling init script with `stop` does not stop `smcrouted`
    * ifindex in UNIX/POSIX is an interger, not unsigned short
* Wed Nov 14 2018 Tomáš Chvátal <tchvatal@suse.com>
  - Remove ip_route.h for the license clash
* Sat Nov 10 2018 mardnh@gmx.de
  - Update to version 2.4.3
    Changes
    * Add strlcat() replacement from OpenBSD, use instead of strcat()
    * smcrouted should never log to system console, proposed by Westermo
    Fixes
    * smcrouted fails to join multicast groups on interfaces that do not
      yet have an IP address when smcrouted starts up, or when it receives
      SIGHUP, e.g. DHCP client interfaces. This patch release adds a timer
      refresh of interface addresses that retries multicast group joins
      until an address is set. This is similar to issue #55, but does not
      handle interfaces that do not exist yet.
    * Make sure Linux alias interfaces (baseif:num) are registered as
      baseif. Westermo found that use of alias interfaces cause multiple
      VIFs to be registered for the same base interface causing multicast
      routes to use the wrong inbound or outbound VIF. Alias interfaces
      use the same underlying physical interface so only one VIF needed.
    * Fix display of route counters and column alignment
    * Simplify utimensat() replacement, AT_SYMLINK_NOFOLLOW unused
* Mon Sep 10 2018 mardnh@gmx.de
  - Update to version 2.4.2
    Changes
    * Add wrapper script smcroute for use with old style startup scripts
    * Add symlinks to man pages for smcrouted.8 and smcroutectl.8
    * Update SysV init script, daemon now called smcrouted
    Fixes
    * Fix #96: A .conf line may be missing final newline, this is fine
    * Spellcheck smcroute.conf example
* Mon Jun 18 2018 mardnh@gmx.de
  - Initial package, version 2.4.1

Files

/etc/smcroute.conf
/etc/smcroute.d
/usr/lib/systemd/system/smcroute.service
/usr/sbin/rcsmcroute
/usr/sbin/smcroute
/usr/sbin/smcroutectl
/usr/sbin/smcrouted
/usr/share/doc/packages/smcroute
/usr/share/doc/packages/smcroute/README.md
/usr/share/licenses/smcroute
/usr/share/licenses/smcroute/COPYING
/usr/share/man/man5/smcroute.conf.5.gz
/usr/share/man/man8/smcroutectl.8.gz
/usr/share/man/man8/smcrouted.8.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Fri Nov 19 23:17:08 2021