Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

pciutils-3.7.0-4.1 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: pciutils Distribution: openSUSE Tumbleweed
Version: 3.7.0 Vendor: openSUSE
Release: 4.1 Build date: Fri Jun 18 10:32:56 2021
Group: Hardware/Other Build host: armbuild21
Size: 141319 Source RPM: pciutils-3.7.0-4.1.src.rpm
Summary: PCI utilities for the Linux Kernel
lspci: This program displays detailed information about all PCI busses
and devices in the system, replacing the original /proc/pci interface.

setpci: This program allows reading from and writing to PCI device
configuration registers. For example, you can adjust the latency timers
with it.

update-pciids: This program downloads the current version of the
pci.ids file.






* Tue May 11 2021 Callum Farmer <>
  - prepare usrmerge (boo#1029961)
* Thu Oct 29 2020
  - Add decode support for RCECs [jsc#SLE-13735]
  - added patches
    + pciutils-add-decode-support-for-RCECs.patch
* Mon Jun 01 2020 Andreas Stieger <>
  - Update to 3.7.0:
    * Add or improved the following capabilities:
      Designated Vendor-Specific, Compute eXpress Link,
      Resizable BARs, VF Resizable BARs, Link Capabilities 2,
      Link Status 2
    * On Linux, lspci can show IOMMU groups
    * setpci can be asked to skip bus scan and operate on a device
      completely specified by its domain/bus/dev/func address
    * back-ends which do not support domains now correctly fail when
      trying to access devices outside domain 0
  - Add upstream keyging to verify source signature
* Thu Apr 02 2020 Martin Pluskal <>
  - Update to version 3.6.4:
    * A new back-end for the GNU Hurd was contributed by Joan Lledó.
    * When printing VPD item identifiers, non-ASCII characters are escaped.
  - Changes for version 3.6.3
    * `lspci -t' (tree mode) can be combined with `-s' to show a sub-tree.
      We also fixed potential buffer overflows in the tree dumper.
    * Cleaned messy code for dumping of I/O, memory, and ROM regions.
      This helped fixing a bug, which caused some 64-bit regions to be
      reported as virtual. All flags are now printed after the address
      (previously, "[virtual]" and "[enhanced]" were before it for no good
    * Added pci_find_cap_nr() to the library, which handles capabilities
      which occur multiple times in a single device.
    * Minor improvements in printing of PCIe capabilities.
    * We now decode the Multicast and Secondary PCI Express extended
    * The list of capability names available to setpci was updated.
    * Minor bugs were fixed in FreeBSD and Solaris ports.
    * We now prefer HTTPS URLs in all documentation
    * The pci.ids file has a man page.
    * As usually, updated pci.ids to the current snapshot of the database.
  - Drop no longer relevant pciutils-3.2.0_update-dist.patch
  - Do not ship update-pciids script - they are provided via hwdata
    package and we dont want to override data by other packages
* Thu Feb 28 2019 Martin Pluskal <>
  - Replace dependency on pciutil-ids with hwdata
* Sun Sep 16 2018 Avindra Goolcharan <>
  - Update to version 3.6.2
    * Added "-P" and "-PP" switches to lspci, which display the path
      through bridges to each device.
    * Fixed a couple of bugs in computation of bus topology. It was
      previously used only for the tree display, but we re-use it
      for computing the paths.
    * As usual, updated pci.ids to the current snapshot of the database.
  - changes for version 3.6.0
    * BARs reported by the OS, but not set on the device itself are
      reliably marked with "[virtual]".
    * lib: Introduced a generic mechanism of string properties. This
      avoids lots of special cases and makes ABI compatibility easier.
    * On systems with OpenFirmware, report corresponding device tree
      nodes as device properties.
    * VPD decoder knows several non-standard extensions.
    * When PCIe link speed is less than the maximum supported by the
      device, it is explicitly marked as "downgraded".
    * Several new capabilities are not decoded yet, but at least
      their names are printed.
    * The Null capability is easily decoded.
    * Formatting of several capabilities was cleaned up.
    * The VGA16 bit in the bridge control register is now supported.
    * Added a port to SylixOS.
    * Added a port to DOS/DJGPP
    * The order in which back-ends are probed was decoupled from the
      internal back-end IDs. This helps, because new back-ends must
      have their ID allocated at the end to keep the ABI, but they
      might need to be proved earlier.
    * The fbsd-device back-end should work again.
    * Fixed a couple of bugs. Most notably, DeviceName was not printed.
  - cleanup with spec-cleaner
  - rebase pciutils-endianh.patch
* Sun Nov 19 2017
  - Update to version 3.5.6
    * MN VPD keyword is decoded correctly.
    * As usual, updated pci.ids to the current snapshot of the
    * FreeBSD back-end: read-only access for non-root, support
      DragonFly BSD, support extended config space.
* Sat Nov 11 2017
  - Update to version 3.5.5
    * Better decoding of AER capability.
    * "Slot Implemented" flag is decoded for PCI/PCI-X to PCIe bridges.
    * Minor fixes of decoding other capabilities.
    * As usual, updated pci.ids to the current snapshot of the
  - cleanup with spec-cleaner
  - switch from ftp to https
  - track signature
* Mon Feb 27 2017
  - Update to version 3.5.4:
    * Previous version broke compilation on systems, for which
      lib/types.h did not provide a 64-bit integer type. It is
      provided everywhere now.
  - Changes for version 3.5.3:
    * When lspci looks for Linux kernel modules, it uses the default
    path to module directory provided by libkmod. Previously,
    it tried to construct the path explicitly, which need not
    work on all systems.
    * Improved formatting of memory and I/O ranges behind a bridge.
    * PCIe link capabilities now display GEN4 speed (16GT/s).
    * PCIe device capabilities now show bits related to atomic
  - Changes for version 3.5.2:
    * The L1 power management capability is now decoded more
    thoroughly. Thanks to Rajat Jain for the patch.
    * The table of configuration registers used by setpci
    had a bug in the definition of SUBSYSTEM_VENDOR_ID.
* Wed May 25 2016
  - Update to version 3.5.1:
    * Fixed symbol versioning of pci_init().



Generated by rpm2html 1.8.1

Fabrice Bellet, Mon Nov 29 00:00:07 2021