|Index||index by Group||index by Distribution||index by Vendor||index by creation date||index by Name||Mirrors||Help||Search|
|Name: lldpd||Distribution: openSUSE Tumbleweed|
|Version: 1.0.12||Vendor: openSUSE|
|Release: 3.1||Build date: Fri Oct 15 23:11:01 2021|
|Group: System/Daemons||Build host: obs-arm-11|
|Size: 552863||Source RPM: lldpd-1.0.12-3.1.src.rpm|
|Summary: Implementation of IEEE 802.1ab (LLDP)|
This implementation provides LLDP sending and reception, supports VLAN and includes an SNMP subagent that can interface to an SNMP agent through AgentX protocol. LLDP is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. This daemon is also able to deal with CDP, FDP, SONMP and EDP protocol. It also handles LLDP-MED extension.
GPL-2.0-or-later AND ISC
* Fri Oct 15 2021 Johannes Segitz <email@example.com> - Drop ProtectClock hardening, can cause issues if other device acceess is needed * Tue Oct 05 2021 Johannes Segitz <firstname.lastname@example.org> - Added hardening to systemd service(s) (bsc#1181400). Added patch(es): * harden_lldpd.service.patch * Fri Aug 20 2021 Martin Hauke <email@example.com> - Update to version 1.0.12: Fix: * Use a dedicated file lock to prevent concurrent changes from lldpcli. * Require/display powerpairs for Dot3 power even when device type is PD. - Fix URL * Sun May 02 2021 Martin Hauke <firstname.lastname@example.org> - Update to version 1.0.11: * Changes: + Disable LLDP in firmware for Intel X7xx cards. * Fix: + Ensure Intel E8xx cards can transmit LLDP packets. * Sat Apr 10 2021 Martin Hauke <email@example.com> - Update to version 1.0.10: Fix: * Fix chroot directory creation. * Fri Apr 02 2021 Martin Hauke <firstname.lastname@example.org> - Update to version 1.0.9: Fix: * Do not use interface alias if we set it ourselves. * More memory leak fixes on duplicate TLVs in LLDP, CDP and EDP (related to CVE-2020-27827). Changes: * Display port status with "show interfaces". * Do not display "age" and "via" when using "show interfaces". * Thu Jan 14 2021 Martin Hauke <email@example.com> - Update to version 1.0.8: Fix: * Out-of-bound read access when parsing LLDP-MED civic address in liblldpctl for malformed fields. * Fix memory leak when receiving LLDPU with duplicate fields. CVE-2020-27827. Changes: * Enable "router" capability bit when IPv6 routing is enabled. * Sun Nov 01 2020 Martin Hauke <firstname.lastname@example.org> - Update to version 1.0.7: Fix: * Do not listen only to LLDP packets on Linux. When an interface is enslaved to an Open vSwitch, incoming packets are missed. * Tue Oct 13 2020 Jan Engelhardt <email@example.com> - Replace old specfile constructs. Do not suppress errors from useradd. Require right subpackage from lldpd-devel. Trim redundancies from descriptions. * Sat Sep 05 2020 Martin Hauke <firstname.lastname@example.org> - Update to version 1.0.6: Fix: * Do not loose chassis local information when interface status changes. * Fix SNMP walk on lldpRemTable when missing remote system name or description. * Remove length limitation on system description and platform. Changes: * Deprecate use of lldpctl_watch_callback(). Use lldpctl_watch_callback2() instead. * Upgrade embedded libevent to 2.1.11-stable * Add support of sending LLDP frames on a configured VLAN * Sun Feb 02 2020 Martin Hauke <email@example.com> - Update to version 1.0.5: Changes: * Interface names are also matched for management addresses. * On Linux, only register protocol handler for LLDP when only LLDP is enabled. * Stricter on LLDP incoming frames validation. * Add support for VLAN-aware bridges for Linux (no range support). * Add support for 802.3BT (no SNMP support). * Add support for millisecond-grained tx-interval * Use generic names for VLAN names, instead of interface names (eg vlan100 instead of eth1.100). Fix: * Don't clear chassis TLV on shutdown LLDPDU. * Don't require/display powerpairs for Dot3 power when device type is PD. * Wed Nov 13 2019 Martin Hauke <firstname.lastname@example.org> - Correct License * MIT -> ISC * Sun Jun 16 2019 Martin Hauke <email@example.com> - Update to version 1.0.4: Changes: * Add "configure system max-neighbors XX" command to modify maximum of neighbors accepted per port. * Implement lldpRemOrgDefInfoTable table for custom TLVs. * Fix: * Better compliance for statsTLVsUnrecognizedTotal and statsAgeoutsTotal counters. * On Linux, handle rare blocking case in Netlink code. * Thu Feb 14 2019 Martin Pluskal <firstname.lastname@example.org> - Update to version 1.0.3: * Fix creation of chroot directory. - Simplify spec file * Mon Dec 03 2018 email@example.com - Update to version 1.0.2 * On Linux, the monitor process will now drop its privileges instead of running as root. It will keep CAP_NET_RAW, CAP_NET_ADMIN and CAP_DAC_OVERRIDE capabilities. * Support for CDP PD PoE (with negotiation). * Move support for bonded devices on Linux < 2.6.27 into the `--enable-oldies` option. This avoids duplicate packets starting from Linux 4.19. * Wed Aug 01 2018 firstname.lastname@example.org - Adjust sysconfig * Mon Apr 09 2018 email@example.com - Update to version 1.0.1 (boo#1103351) * Use "mkdir -p" instead of "mkdir" in systemd unit. * Mon Apr 09 2018 firstname.lastname@example.org - Update to version 1.0.0 * Changes: + Chassis ID can be set to an arbitrary value with "configure system chassisid". + Port description can be overriden directly with "configure lldp portdescription". + Command "configure system interface permanent" enables one to specify a pattern for interfaces to be kept in memory even when they are removed from the system. * Fix: + Ensure chassis-related changes are propagated immediately. + Ensure management address change is correctly detected.
/etc/lldpd.d /etc/lldpd.d/README.conf /usr/lib/systemd/system/lldpd.service /usr/sbin/lldpcli /usr/sbin/lldpctl /usr/sbin/lldpd /usr/sbin/rclldpd /usr/share/bash-completion /usr/share/bash-completion/completions /usr/share/bash-completion/completions/lldpcli /usr/share/doc/packages/lldpd /usr/share/doc/packages/lldpd/CONTRIBUTE.md /usr/share/doc/packages/lldpd/ChangeLog /usr/share/doc/packages/lldpd/LICENSE /usr/share/doc/packages/lldpd/NEWS /usr/share/doc/packages/lldpd/README.md /usr/share/fillup-templates/sysconfig.lldpd /usr/share/man/man8/lldpcli.8.gz /usr/share/man/man8/lldpctl.8.gz /usr/share/man/man8/lldpd.8.gz /usr/share/zsh /usr/share/zsh/site-functions /usr/share/zsh/site-functions/_lldpcli
Generated by rpm2html 1.8.1
Fabrice Bellet, Sun Nov 14 23:11:47 2021