| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: atop | Distribution: openSUSE Tumbleweed |
| Version: 2.11.0 | Vendor: openSUSE |
| Release: 1.3 | Build date: Mon Jul 29 08:48:50 2024 |
| Group: Unspecified | Build host: reproducible |
| Size: 864836 | Source RPM: atop-2.11.0-1.3.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: https://www.atoptool.nl/ | |
| Summary: Monitor for System Resources and Process Activity | |
Atop is an ASCII full-screen performance monitor, similar to the top command. At regular intervals, it shows system-level activity related to the CPU, memory, swap, disks and network layers, and it shows for every active process the CPU utilization in system and user mode, the virtual and resident memory growth, priority, username, state, and exit code. The process level activity is also shown for processes which finished during the last interval, to get a complete overview about the consumers of things such as CPU time. Atop only shows the active system-resources and processes, and only shows the deviations since the previous interval.
GPL-2.0-only
* Mon Jul 29 2024 Michael Vetter <mvetter@suse.com>
- Update to 2.11.0:
* Cgroups (version 2) support.
Show the hierarchical structure of cgroups and the related metrics
with key/option 'G', and define the cgroup depth with the keys/options
2 till 7. Key/option 8 also shows the processes per cgroup level,
except the kernel processes in the root cgroup. Key/option 9 shows
the related processes per cgroup level including the kernel processes
in the root cgroup. With key/option 'C' the output is sorted on
CPU consumption (default), with key/option 'M' on memory consumption,
and with key/option 'D' (requires root privileges) on disk utilization.
Note: The collection of cgroup information per process is not supported any more.
* Twin mode: live measurement with review option.
In twin mode atop spawns into a lower level process that gathers
the counters and writes them to a temporary raw file, and an upper level
process that reads the counters from the temporary raw file and presents them to
the user.
The reading of the upper level process keeps in pace with the written samples
of the lower level process for live measurements. However, when pressing the
'r' (reset to measurement begin), the 'b' (branch to time stamp),
or the 'T' (previous sample), the upper level process implicitly
pauses with the possibility to review previous samples.
The 'z' (explicit pause) can also be used to pause the live measurement.
When pressing the 'z' again (continue after pause) viewing of the
live measurement will be continued.
* Various corrections related to JSON output.
* Improved gathering of current CPU frequency.
* Support more than 500 CPUs.
* The format of the raw file is incompatible with previous versions.
Raw files from previous versions can be converted to the new layout
with the atopconvert command.
- Update atop-makefile.patch
* Fri Jan 05 2024 Michael Vetter <mvetter@suse.com>
- Update to 2.10.0:
* Additional memory statistics on system level: amount of available
memory, amount of memory used for Transparant Huge Pages, amount
of memory used by two categories of static huge pages (usually
2MiB and 1GiB), and the number of pages transferred to/from zswap.
* Additional counters for the number of idle threads on system
level and process level.
* Refined view of memory bar graph, including free static huge pages.
* Generic way to determine the container id or pod name for
containerized processes.
* Support for a BPF-based alternative[1] for the netatop kernel
module to gather network statistics per process/thread.
* Use the -z flag followed by a regex to prepend matching environment
variables to the full command line that is shown per process (with key 'c').
* Various bugfixes (like memory leak when switching to bar graph mode)
and minor improvements.
* Bugfix: failing malloc while starting atopsar (unprivileged) for a live measurement.
* The program atophide can be used to make an extraction from an input
raw log to an output raw log, optionally specifying a begin time and/or an
end time. The output raw log can be anonymized, i.e. the hostname
will be replaced, command names of non-standard commands will be
replaced, all command arguments will be wiped, logical volume names
will be replaced and NFS mounted volume names will be replaced.
* The format of the raw file is incompatible with previous versions.
Raw files from previous versions can be converted to the new layout
with the atopconvert command.
* Sat May 13 2023 Michael Vetter <mvetter@suse.com>
- Update to 2.9.0:
* Avoid compiler warning by limiting PSI average
* Install cleanup function to avoid termination of parent process
* add man for PAG steal
* Oomkills event should not remain orange after boot values
* Clarified atop man page
* Closing bracket missing in synopsis
* Add highlight concerning bar graph mode
* Introduce bar graph mode Besides all detailed information that
is supplied by atop on system and process level, a (character-based)
bar graph can be shown about the utilization of the most critical system resources
* Freeing ethlink should depend of ifdef
* Added reset to indicate shadow file to be closed
* fix atopacctd.c: failed to start atopacct.service
* acctatop: reacquire acctfd to collect nprocexit for some bad cases
* Calibrate nprocexit to avoid atop coredumps unexpectedly
* json.c: fix avque counters output
* Resolve compiler warnings from latest versions of GCC
* Added versdate.h to make clean target
* Revert "Added versdate.h to make clean target"
* Added versdate.h to make clean target
* fix calculation for scan and steal
* only call str.decode if nvml returned bytes
* Add exit epoch to parseable output PRG (solves issue #242)
* Minor correction in man page for NVCSW/NIVCSW
* Context switches (voluntary and involuntary) on process level incorrect
* Various modifications releated to (non)voluntary context switches
* Add nvcsw and nivcsw for each process
* ifprop.c: Fix possible memory leak
* Code cleanup and prototype additions
* Consistency check on number of threads (solves issue #232)
* atop-rotate.service: use restart instead of try-restart
* Add link to atophttpd
- Update patches:
* atop-makefile.patch
* harden_atop-rotate.service.patch
* Sat Jan 07 2023 Michael Vetter <mvetter@suse.com>
- Update to 2.8.1:
* Correct NUMA conversion in logfiles from version 2.7 to 2.8
* Avoid buffer overflows during value formatting
* Solve compiler warnings about format-truncation
* Mon Jan 02 2023 Michael Vetter <mvetter@suse.com>
- Update to 2.8.0:
* Rename AUTHOR in spec file
* Adapt atopconvert for conversion to version 2.8
* Atopacct.service verifies if psacct/acct is active (#227)
To avoid that the atopacctd daemon and the (ps)acct service both
try to activate process accounting continuously, the atopacct.service
refuses to start when the (ps)acct service is already active.
* Fix LLC output for Json
* Solve format-overflow/maybe-uninitialized warnings
* Reshuffle counters to ease raw file conversion
* Recalculate average queue in parseable output
* Corrected the order of inflight/avque
* Add inflight and avque counters to parseable data
* Fix BDELAY in priphead call to make_proc_prints for schedprocs
* Correct the array index used for previous samples per-container CPU values
* Reinstate dropped printing of avio msec values between 99.95 and 9995
* photosyst: add ceph rbd disk display
* photosys.c: correct the numa number for NUM and NUC
* Timeout when setting semaphore in atop (#207)
* Current CPU set to -1 for terminated process (#201)
When a process has terminated (status 'E') the current CPU will be
set to -1 (means: unknown) in the parsable output with label PRC.
* Typo corrections and correction in man page
* Introduce JSON output by '-J xxx'
* Add missing counter iInCsumErrors to ICMP counters
* supplement inflight I/O requests
* Man page: clarify elapsed time in PRG parseable output
* Exponent calulation for high counter might exceed column width
When a column width was defined of e.g. 4 positions, the value
99999 was shown as 100e3 instead of 99e3 (upward rounding caused
an extra position).
* PID selection can not be undone for same interval When pressing
'I' to select particular PIDs and pressing 'I' again within the
same interval to deselect by pressing the Enter-key, the deselection
is ignored. Solved by reinitializing the input buffer.
* Split the MEM line into two lines and add pagetable size Since it was
hardly possible to view the values in the MEM line (too many), the memory
utilization has been spread over two lines. The amount of memory used
for page tables has been added.
* Memory usage for TCP/UDP sockets
* Add Documentation key to atop-rotate.service/.timer (#206)
* Correct typos in man pages (#205)
* Add cgroup support (#127) The current cgroup is registered
for systems that are based on cgroup v2. Apart from the group name also
relevant controller information is maintained, like the cpu.max and the
memory.max (for the group itself and the most restrictive value in the
parent groups).
* Fix compiling error with -DHTTPSTATS
* supplement tcpsock and udpsock memory consumption
* Store PID width in header of raw log Register the number of positions
for PID and TID numbers on the measured system in the raw log. In this
way, the viewing of the raw log on another system will use the proper
column width for PID/TID.
* showhdrline: fix OOB access when COLS is too small
* Fix disk busy in man page
* Add block I/O delay to processes/threads
* Move run_in_guest into various.c
* Minor changes to text, column priority and coloring
* Support pgin & pgout
* Correction on calibration (one too many)
* Detect vmmemctl at two locations
* Use dup2 instead of close+dup
* Fix compiling warning
* Calibrate the value of nthr for each process
* photosyst.c: fixed path for vmmemctl
* Fix typo in man page
* Added link
* Only print current CPU frequency when supported by CPU architecture
* Lower priority of column 'numnode' in MEM line
* Support per-second counter for LLC
* Reformat status line info in initial screen
* Add LLC in atop man page
* Support LLC collection
* Add OpenRC init scripts (atop, atopacct)
* Support LLC collection
- Refresh patches:
* harden_atop-rotate.service.patch
* harden_atopacct.service.patch
* Mon Feb 28 2022 Michael Vetter <mvetter@suse.com>
- Update to 2.7.1:
* Correct disk stats in atopsar (#182)
* Explicit type definition in atop.service (#180)
* Fri Jan 07 2022 Michael Vetter <mvetter@suse.com>
- Update to 2.7.0:
* Describe (un)restricted view in first screen
* Cosmetic change
* Determine (un)restricted view by verifying suid instead of euid.
* Do not ignore unknown network interface
* Parseable output: optionally exchange spaces in command
* No setuid by default
* Correct conversion to 2.7 raw files
* Corrected type
* Only show per-node NUMA stats when more than 1 node
* Prepare man pages for version 2.7
* Prepare atopconvert for version 2.7
* Detect logrotation for process accounting with psacct/acct
* Speed and duplex mode not correctly filled for interface
* Bug solution related to discards
* Support discard counter for disks and skip unused disks
* ifprop.c: fix ioctl parameter after handshaking with kernel
* Show gigabits/sec instead of megabits/sec for Infiniband #131
* CVE: use execvp with a specified path to avoid PATH hijacking
* Correct memory busy logic in atopsar
* Add parseable output for per-node NUMA counters
* Additions to NUMA counters Table overflow checks
* Gather and show per numa cpu related statistics
* Gather and show per numa memory related statistics
* Correction in handling of zswap and ksm counters
* Support containers created by podman
* Cleanup old messages
* Do not change owner to root in Makefile (#76)
* Support process accounting log /var/log/account/pacct (#138)
* Polish do_perfevents when atop built with NOPERFEVENT
* Do not use doconvert funtion to validate counter (#160)
* New counter for number of NUMA pages migrated
* Modify field order and priority of paging counters
* Small text modification for migrated counter
* Avoid non-initialized prestat by introducing extra pointer
* Function 'calcdiff' (deviate.c) used uninitialized prestat struct
* Reserver space for future counters.
* Clean up ignored files
* Variable number of positions for sortitem
* Adapt man page of atop for state selection (add state 'I').
* Allow thread state 'I' with state selection (key 'Q')
* Count idle threads as non-interruptible threads
* Uninitialized index might cause segmentation fault.
* Support NVMe multipath disk statistics
* Support page migration counter
* photosyst.c: fix build on musl
* Use of struct ethtool_link_settings should be conditional
* Cosmetic change (source code layout)
* Various bug fixes and in general add 'thread' to all messages
* Properly define if interface is virtual or physical
* Add license info to various include files (solves issue #144)
* HTTP statistics modified from -h flag to -o flag (#152)
* Possible buffer overflow with huge number of seconds Number
of seconds will be limited to 5 positions.
* Possible buffer overflow with average disk I/O
* Allow process selection based on specific process states.
* Correct definition of environment variable LOGOPTS
* Switch to using curses vw_printw as vwprintw is deprecated
* Support multiple counters 'allocstall_' in /proc/vmstat.
* Avoid integer overflow when calculating PSI percentages.
* Suppress irrelevant counters (solves issue #148)
* Add the number of OOM kills to the -s report
* Record the number of process stalls to run memory compaction
* Make clean removes atopsar now (issue 145)
* Add counter for the number of OOM kills to the PAG line
* Add counters for zswap and KSM.
* ifprop.c: fix build with kernel < 4.6
* Fix initifprop() when obtaining properties of all interfaces
* Fixed rounding problems in the average-per-second mode.
- Refresh atop-makefile.patch
- Refresh harden_atop.service.patch
- Call make install instead of make systemdinstall
Default is systemd now
* Wed Aug 11 2021 Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s). Added patch(es):
* harden_atop-rotate.service.patch
* harden_atop.service.patch
* harden_atopacct.service.patch
* harden_atopgpu.service.patch
* Tue Apr 13 2021 Ferdinand Thiessen <rpm@fthiessen.de>
- Update to version 2.6.0
* Sort threads within process.
* Individual threads within a process (key 'y') are shown in the
order of their TID. With the additional key 'Y' threads within
a process are sorted based on the current sort criterium.
* Show the WCHAN per thread.
* With the key 'W' is active, the wait channel is determined per
thread and shown with the scheduling information (key 's').
* Show runqueue delay per thread/process.
* For every process (cumulated) and every thread the time spent
waiting on the runqueue is shown as value 'RDELAY'.
* Show other modified/new metrics:
+ PSI pressure during interval time is shown
+ Counter 'avio' (average I/O time) for fast disks in
microseconds or nanoseconds
+ Counter 'zfarc' showing the current size of the ARC (cache)
for ZFSonlinux
+ Counter 'swcac' showing the current size of the swap cache
+ Counter LOCKSZ showing the virtual locked memory size
* Avoid crash with very high load average values.
* Fix errors in reading InfiniBand states.
* Support of rawlog files spanning multiple days.
* The time specification to define the begin time (-b flag)
and end time (-e flag) of both atop and atopsar is
[YYYYMMDD]hhmm now
* This also applies to the branch key ('b') when using atop
interactively.
* Support reading rawlog from a pipe.
* Rawlog data can be read from a pipe by atop and atopsar with
the option '-r -'. In this way, concatenated rawlog data from
the command atopcat can be directly processed.
* New program atopcat, the program atopcat concatenates rawlog
files and writes this data to stdout. The output can be
redirected to a new rawlog file or to atop/atopsar directly
via a pipe (see option '-r -' of these commands).
In this way e.g. weekly or monthly reports or extractions
can be created.
* Fri Jul 31 2020 Matthias Eliasson <elimat@opensuse.org>
- Update to version 2.5.0
Modifications for atop:
* Avoid using perf counters in VM
New option 'perfevents' in the atoprc file to define if the Instructions
Per Cycle (IPC) should be retrieved via the 'perf' counters. Specify
value 'auto' (default), 'enable' or 'disable'. In case of 'auto', the
Instructions Per Cycle counter will not be retrieved on VMs due to the
overhead of reading this counter in a guest.
* Improve daily rotation of logfile for systemd-based systems.
Exchange the files /etc/cron.d/atop, /etc/logrotate.d/psaccs_atop,
/etc/logrotate.d/psaccu_atop, /usr/share/atop/atop.daily,
/var/log/atop/dummy_after and /var/log/atop/dummy_before by
atop-rotate.service and atop-rotate.timer.
* Bug fixes:
Correction of PSI value 'io full'.
Use smaps_rollup (if present) instead of smaps for better performance.
Use writev instead of 3 single writes to avoid logfile corruption.
Modified handling of error messages (remain visible after window is
closed).
Correct CID for containers created by Kubernetes.
Allow reading a logfile via a named pipe (non-seekable).
Modifications for atopconvert:
* Show version of input file (even if only one parameter specified).
General:
* The format of the raw file is compatible with version 2.4.
- Run spec-cleaner
- Remove requires for cron and logrotate now that there is systemd service
and timers handling logrotation
- Remove Requires(post) for permissions since atop does not use cron files anymore
- Refresh patch:
* atop-makefile.patch
- Add atop defaults in /etc/default/atop
/usr/bin/atop /usr/bin/atop-2.11.0 /usr/bin/atopcat /usr/bin/atopconvert /usr/bin/atophide /usr/bin/atopsar /usr/bin/atopsar-2.11.0 /usr/share/applications/atop.desktop /usr/share/doc/packages/atop /usr/share/doc/packages/atop/README /usr/share/licenses/atop /usr/share/licenses/atop/COPYING /usr/share/man/man1/atop.1.gz /usr/share/man/man1/atopcat.1.gz /usr/share/man/man1/atopconvert.1.gz /usr/share/man/man1/atophide.1.gz /usr/share/man/man1/atopsar.1.gz /usr/share/man/man5/atoprc.5.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Dec 21 00:22:59 2024