Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

hostapd-2.9-lp152.1.4 RPM for ppc64le

From OpenSuSE Ports Leap 15.2 for ppc64le

Name: hostapd Distribution: openSUSE:Leap:15.2:PowerPC / ports
Version: 2.9 Vendor: openSUSE
Release: lp152.1.4 Build date: Sat May 16 09:01:10 2020
Group: Hardware/Wifi Build host: obs-power8-03
Size: 2361281 Source RPM: hostapd-2.9-lp152.1.4.src.rpm
Packager: https://bugs.opensuse.org
Url: https://w1.fi/
Summary: Daemon for running a WPA capable Access Point
hostapd is a user space daemon for access point and authentication
servers. It implements IEEE 802.11 access point management, IEEE
802.1X/WPA/WPA2/EAP Authenticators, RADIUS client, EAP server, and
RADIUS authentication server. Currently, hostapd supports HostAP,
madwifi, and prism54 drivers. It also supports wired IEEE 802.1X
authentication via any ethernet driver.

Provides

Requires

License

GPL-2.0-only OR BSD-3-Clause

Changelog

* Thu Sep 05 2019 Michael Ströder <michael@stroeder.com>
  - Update to version 2.9
    * SAE changes
    - disable use of groups using Brainpool curves
    - improved protection against side channel attacks
      [https://w1.fi/security/2019-6/]
    * EAP-pwd changes
    - disable use of groups using Brainpool curves
    - improved protection against side channel attacks
      [https://w1.fi/security/2019-6/]
    * fixed FT-EAP initial mobility domain association using PMKSA caching
    * added configuration of airtime policy
    * fixed FILS to and RSNE into (Re)Association Response frames
    * fixed DPP bootstrapping URI parser of channel list
    * added support for regulatory WMM limitation (for ETSI)
    * added support for MACsec Key Agreement using IEEE 802.1X/PSK
    * added experimental support for EAP-TEAP server (RFC 7170)
    * added experimental support for EAP-TLS server with TLS v1.3
    * added support for two server certificates/keys (RSA/ECC)
    * added AKMSuiteSelector into "STA <addr>" control interface data to
      determine with AKM was used for an association
    * added eap_sim_id parameter to allow EAP-SIM/AKA server pseudonym and
      fast reauthentication use to be disabled
    * fixed an ECDH operation corner case with OpenSSL
* Wed Apr 24 2019 Michael Ströder <michael@stroeder.com>
  - Update to version 2.8
    * SAE changes
    - added support for SAE Password Identifier
    - changed default configuration to enable only group 19
      (i.e., disable groups 20, 21, 25, 26 from default configuration) and
      disable all unsuitable groups completely based on REVmd changes
    - improved anti-clogging token mechanism and SAE authentication
      frame processing during heavy CPU load; this mitigates some issues
      with potential DoS attacks trying to flood an AP with large number
      of SAE messages
    - added Finite Cyclic Group field in status code 77 responses
    - reject use of unsuitable groups based on new implementation guidance
      in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
      groups with prime >= 256)
    - minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-1/] (CVE-2019-9494)
    - fixed confirm message validation in error cases
      [https://w1.fi/security/2019-3/] (CVE-2019-9496)
    * EAP-pwd changes
    - minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-2/] (CVE-2019-9495)
    - verify peer scalar/element
      [https://w1.fi/security/2019-4/] (CVE-2019-9497 and CVE-2019-9498)
    - fix message reassembly issue with unexpected fragment
      [https://w1.fi/security/2019-5/]
    - enforce rand,mask generation rules more strictly
    - fix a memory leak in PWE derivation
    - disallow ECC groups with a prime under 256 bits (groups 25, 26, and
      27)
    * Hotspot 2.0 changes
    - added support for release number 3
    - reject release 2 or newer association without PMF
    * added support for RSN operating channel validation
      (CONFIG_OCV=y and configuration parameter ocv=1)
    * added Multi-AP protocol support
    * added FTM responder configuration
    * fixed build with LibreSSL
    * added FT/RRB workaround for short Ethernet frame padding
    * fixed KEK2 derivation for FILS+FT
    * added RSSI-based association rejection from OCE
    * extended beacon reporting functionality
    * VLAN changes
    - allow local VLAN management with remote RADIUS authentication
    - add WPA/WPA2 passphrase/PSK -based VLAN assignment
    * OpenSSL: allow systemwide policies to be overridden
    * extended PEAP to derive EMSK to enable use with ERP/FILS
    * extended WPS to allow SAE configuration to be added automatically
      for PSK (wps_cred_add_sae=1)
    * fixed FT and SA Query Action frame with AP-MLME-in-driver cases
    * OWE: allow Diffie-Hellman Parameter element to be included with DPP
      in preparation for DPP protocol extension
    * RADIUS server: started to accept ERP keyName-NAI as user identity
      automatically without matching EAP database entry
    * fixed PTK rekeying with FILS and FT
    wpa_supplicant:
    * SAE changes
    - added support for SAE Password Identifier
    - changed default configuration to enable only groups 19, 20, 21
      (i.e., disable groups 25 and 26) and disable all unsuitable groups
      completely based on REVmd changes
    - do not regenerate PWE unnecessarily when the AP uses the
      anti-clogging token mechanisms
    - fixed some association cases where both SAE and FT-SAE were enabled
      on both the station and the selected AP
    - started to prefer FT-SAE over SAE AKM if both are enabled
    - started to prefer FT-SAE over FT-PSK if both are enabled
    - fixed FT-SAE when SAE PMKSA caching is used
    - reject use of unsuitable groups based on new implementation guidance
      in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
      groups with prime >= 256)
    - minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-1/] (CVE-2019-9494)
    * EAP-pwd changes
    - minimize timing and memory use differences in PWE derivation
      [https://w1.fi/security/2019-2/] (CVE-2019-9495)
    - verify server scalar/element
      [https://w1.fi/security/2019-4/] (CVE-2019-9499)
    - fix message reassembly issue with unexpected fragment
      [https://w1.fi/security/2019-5/]
    - enforce rand,mask generation rules more strictly
    - fix a memory leak in PWE derivation
    - disallow ECC groups with a prime under 256 bits (groups 25, 26, and
      27)
    * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y
    * Hotspot 2.0 changes
    - do not indicate release number that is higher than the one
      AP supports
    - added support for release number 3
    - enable PMF automatically for network profiles created from
      credentials
    * fixed OWE network profile saving
    * fixed DPP network profile saving
    * added support for RSN operating channel validation
      (CONFIG_OCV=y and network profile parameter ocv=1)
    * added Multi-AP backhaul STA support
    * fixed build with LibreSSL
    * number of MKA/MACsec fixes and extensions
    * extended domain_match and domain_suffix_match to allow list of values
    * fixed dNSName matching in domain_match and domain_suffix_match when
      using wolfSSL
    * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both
      are enabled
    * extended nl80211 Connect and external authentication to support
      SAE, FT-SAE, FT-EAP-SHA384
    * fixed KEK2 derivation for FILS+FT
    * extended client_cert file to allow loading of a chain of PEM
      encoded certificates
    * extended beacon reporting functionality
    * extended D-Bus interface with number of new properties
    * fixed a regression in FT-over-DS with mac80211-based drivers
    * OpenSSL: allow systemwide policies to be overridden
    * extended driver flags indication for separate 802.1X and PSK
      4-way handshake offload capability
    * added support for random P2P Device/Interface Address use
    * extended PEAP to derive EMSK to enable use with ERP/FILS
    * extended WPS to allow SAE configuration to be added automatically
      for PSK (wps_cred_add_sae=1)
    * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS)
    * extended domain_match and domain_suffix_match to allow list of values
    * added a RSN workaround for misbehaving PMF APs that advertise
      IGTK/BIP KeyID using incorrect byte order
    * fixed PTK rekeying with FILS and FT
* Fri Dec 28 2018 Jan Engelhardt <jengelh@inai.de>
  - Use noun phrase in summary.
* Mon Dec 17 2018 Karol Babioch <kbabioch@suse.de>
  - Applied spec-cleaner
  - Added bug reference
  - Use defconfig file as template for configuration instead of patching it
    during build. This is easier to maintain in the long run. This removes the
    patch hostapd-2.6-defconfig.patch in favor of a simple config file, which is
    copied over from the source directory.
  - Enabled CLI editing and history support.
* Fri Dec 07 2018 mardnh@gmx.de
  - Update to version 2.7
    * fixed WPA packet number reuse with replayed messages and key
      reinstallation
      [http://w1.fi/security/2017-1/] (CVE-2017-13082) (bsc#1056061)
    * added support for FILS (IEEE 802.11ai) shared key authentication
    * added support for OWE (Opportunistic Wireless Encryption, RFC 8110;
      and transition mode defined by WFA)
    * added support for DPP (Wi-Fi Device Provisioning Protocol)
    * FT:
    - added local generation of PMK-R0/PMK-R1 for FT-PSK
      (ft_psk_generate_local=1)
    - replaced inter-AP protocol with a cleaner design that is more
      easily extensible; this breaks backward compatibility and requires
      all APs in the ESS to be updated at the same time to maintain FT
      functionality
    - added support for wildcard R0KH/R1KH
    - replaced r0_key_lifetime (minutes) parameter with
      ft_r0_key_lifetime (seconds)
    - fixed wpa_psk_file use for FT-PSK
    - fixed FT-SAE PMKID matching
    - added expiration to PMK-R0 and PMK-R1 cache
    - added IEEE VLAN support (including tagged VLANs)
    - added support for SHA384 based AKM
    * SAE
    - fixed some PMKSA caching cases with SAE
    - added support for configuring SAE password separately of the
      WPA2 PSK/passphrase
    - added option to require MFP for SAE associations
      (sae_require_pmf=1)
    - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection
      for SAE;
      note: this is not backwards compatible, i.e., both the AP and
      station side implementations will need to be update at the same
      time to maintain interoperability
    - added support for Password Identifier
    * hostapd_cli: added support for command history and completion
    * added support for requesting beacon report
    * large number of other fixes, cleanup, and extensions
    * added option to configure EAPOL-Key retry limits
      (wpa_group_update_count and wpa_pairwise_update_count)
    * removed all PeerKey functionality
    * fixed nl80211 AP mode configuration regression with Linux 4.15 and
      newer
    * added support for using wolfSSL cryptographic library
    * fixed some 20/40 MHz coexistence cases where the BSS could drop to
      20 MHz even when 40 MHz would be allowed
    * Hotspot 2.0
    - added support for setting Venue URL ANQP-element (venue_url)
    - added support for advertising Hotspot 2.0 operator icons
    - added support for Roaming Consortium Selection element
    - added support for Terms and Conditions
    - added support for OSEN connection in a shared RSN BSS
    * added support for using OpenSSL 1.1.1
    * added EAP-pwd server support for salted passwords
  - Remove not longer needed patches (fixed upstream)
    * rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
    * rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
    * rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
    * rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch
    * rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
    * rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch
    * rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
    * rebased-v2.6-0001-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch
  - Verify source signature
* Fri Oct 19 2018 Karol Babioch <kbabioch@suse.com>
  - Added rebased-v2.6-0001-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch
    Ignore unauthenticated encrypted EAPOL-Key data (CVE-2018-14526, bsc#1104205).
* Wed Oct 18 2017 chris@intrbiz.com
  - Fix KRACK attacks (bsc#1063479, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13087, CVE-2017-13088):
    * rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
    * rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
    * rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
    * rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch
    * rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
    * rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch
    * rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
    * rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
* Sun Oct 02 2016 chris@intrbiz.com
  - update to upstream release 2.6
    * fixed EAP-pwd last fragment validation
      [http://w1.fi/security/2015-7/] (CVE-2015-5314)
    * fixed WPS configuration update vulnerability with malformed passphrase
      [http://w1.fi/security/2016-1/] (CVE-2016-4476)
    * extended channel switch support for VHT bandwidth changes
    * added support for configuring new ANQP-elements with
      anqp_elem=<InfoID>:<hexdump of payload>
    * fixed Suite B 192-bit AKM to use proper PMK length
      (note: this makes old releases incompatible with the fixed behavior)
    * added no_probe_resp_if_max_sta=1 parameter to disable Probe Response
      frame sending for not-associated STAs if max_num_sta limit has been
      reached
    * added option (-S as command line argument) to request all interfaces
      to be started at the same time
    * modified rts_threshold and fragm_threshold configuration parameters
      to allow -1 to be used to disable RTS/fragmentation
    * EAP-pwd: added support for Brainpool Elliptic Curves
      (with OpenSSL 1.0.2 and newer)
    * fixed EAPOL reauthentication after FT protocol run
    * fixed FTIE generation for 4-way handshake after FT protocol run
    * fixed and improved various FST operations
    * TLS server
    - support SHA384 and SHA512 hashes
    - support TLS v1.2 signature algorithm with SHA384 and SHA512
    - support PKCS #5 v2.0 PBES2
    - support PKCS #5 with PKCS #12 style key decryption
    - minimal support for PKCS #12
    - support OCSP stapling (including ocsp_multi)
    * added support for OpenSSL 1.1 API changes
    - drop support for OpenSSL 0.9.8
    - drop support for OpenSSL 1.0.0
    * EAP-PEAP: support fast-connect crypto binding
    * RADIUS
    - fix Called-Station-Id to not escape SSID
    - add Event-Timestamp to all Accounting-Request packets
    - add Acct-Session-Id to Accounting-On/Off
    - add Acct-Multi-Session-Id  ton Access-Request packets
    - add Service-Type (= Frames)
    - allow server to provide PSK instead of passphrase for WPA-PSK
      Tunnel_password case
    - update full message for interim accounting updates
    - add Acct-Delay-Time into Accounting messages
    - add require_message_authenticator configuration option to require
      CoA/Disconnect-Request packets to be authenticated
    * started to postpone WNM-Notification frame sending by 100 ms so that
      the STA has some more time to configure the key before this frame is
      received after the 4-way handshake
    * VHT: added interoperability workaround for 80+80 and 160 MHz channels
    * extended VLAN support (per-STA vif, etc.)
    * fixed PMKID derivation with SAE
    * nl80211
    - added support for full station state operations
    - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
      unencrypted EAPOL frames
    * added initial MBO support; number of extensions to WNM BSS Transition
      Management
    * added initial functionality for location related operations
    * added assocresp_elements parameter to allow vendor specific elements
      to be added into (Re)Association Response frames
    * improved Public Action frame addressing
    - use Address 3 = wildcard BSSID in GAS response if a query from an
      unassociated STA used that address
    - fix TX status processing for Address 3 = wildcard BSSID
    - add gas_address3 configuration parameter to control Address 3
      behavior
    * added command line parameter -i to override interface parameter in
      hostapd.conf
    * added command completion support to hostapd_cli
    * added passive client taxonomy determination (CONFIG_TAXONOMY=y
      compile option and "SIGNATURE <addr>" control interface command)
    * number of small fixes
  - renamed hostapd-2.5-defconfig.patch to hostapd-2.6-defconfig.patch
* Sun Oct 18 2015 michael@stroeder.com
  - update to upstream release 2.5
  - removed 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
    (CVE-2015-1863) because it's fixed in upstream release 2.5
  - rebased hostapd-2.4-defconfig.patch -> hostapd-2.5-defconfig.patch
    ChangeLog for hostapd since 2.4:
    2015-09-27 - v2.5
    * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
    [http://w1.fi/security/2015-2/] (CVE-2015-4141 bsc#930077)
    * fixed WMM Action frame parser
    [http://w1.fi/security/2015-3/] (CVE-2015-4142 bsc#930078)
    * fixed EAP-pwd server missing payload length validation
    [http://w1.fi/security/2015-4/]
    (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, bsc#930079)
    * fixed validation of WPS and P2P NFC NDEF record payload length
    [http://w1.fi/security/2015-5/]
    * nl80211:
    - fixed vendor command handling to check OUI properly
    * fixed hlr_auc_gw build with OpenSSL
    * hlr_auc_gw: allow Milenage RES length to be reduced
    * disable HT for a station that does not support WMM/QoS
    * added support for hashed password (NtHash) in EAP-pwd server
    * fixed and extended dynamic VLAN cases
    * added EAP-EKE server support for deriving Session-Id
    * set Acct-Session-Id to a random value to make it more likely to be
    unique even if the device does not have a proper clock
    * added more 2.4 GHz channels for 20/40 MHz HT co-ex scan
    * modified SAE routines to be more robust and PWE generation to be
    stronger against timing attacks
    * added support for Brainpool Elliptic Curves with SAE
    * increases maximum value accepted for cwmin/cwmax
    * added support for CCMP-256 and GCMP-256 as group ciphers with FT
    * added Fast Session Transfer (FST) module
    * removed optional fields from RSNE when using FT with PMF
    (workaround for interoperability issues with iOS 8.4)
    * added EAP server support for TLS session resumption
    * fixed key derivation for Suite B 192-bit AKM (this breaks
    compatibility with the earlier version)
    * added mechanism to track unconnected stations and do minimal band
    steering
    * number of small fixes
* Thu Apr 23 2015 michael@stroeder.com
  - update version 2.4
  - added 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
    for CVE-2015-1863
  - updated URLs
  - require pkg-config and libnl3-devel during build
  - replaced hostapd-2.3-defconfig.patch by hostapd-2.4-defconfig.patch
    ChangeLog for hostapd since 2.3:
    2015-03-15 - v2.4
    * allow OpenSSL cipher configuration to be set for internal EAP server
      (openssl_ciphers parameter)
    * fixed number of small issues based on hwsim test case failures and
      static analyzer reports
    * fixed Accounting-Request to not include duplicated Acct-Session-Id
    * add support for Acct-Multi-Session-Id in RADIUS Accounting messages
    * add support for PMKSA caching with SAE
    * add support for generating BSS Load element (bss_load_update_period)
    * fixed channel switch from VHT to HT
    * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events
    * add support for learning STA IPv4/IPv6 addresses and configuring
      ProxyARP support
    * dropped support for the madwifi driver interface
    * add support for Suite B (128-bit and 192-bit level) key management and
      cipher suites
    * fixed a regression with driver=wired
    * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce
    * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management
      Request frames and BSS-TM-RESP event to indicate response to such
      frame
    * add support for EAP Re-Authentication Protocol (ERP)
    * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled
    * fixed a regression in HT 20/40 coex Action frame parsing
    * set stdout to be line-buffered
    * add support for vendor specific VHT extension to enable 256 QAM rates
      (VHT-MCS 8 and 9) on 2.4 GHz band
    * RADIUS DAS:
    - extend Disconnect-Request processing to allow matching of multiple
      sessions
    - support Acct-Multi-Session-Id as an identifier
    - allow PMKSA cache entry to be removed without association
    * expire hostapd STA entry if kernel does not have a matching entry
    * allow chanlist to be used to specify a subset of channels for ACS
    * improve ACS behavior on 2.4 GHz band and allow channel bias to be
      configured with acs_chan_bias parameter
    * do not reply to a Probe Request frame that includes DSS Parameter Set
      element in which the channel does not match the current operating
      channel
    * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon
      frame contents to be updated and to start beaconing on an interface
      that used start_disabled=1
    * fixed some RADIUS server failover cases
* Mon Jan 05 2015 michael@stroeder.com
  - update version 2.3
  - removed patch hostapd-2.1-be-host_to_le.patch because it
    seems obsolete
  - hostapd-2.1-defconfig.patch rediffed and renamed to hostapd-2.3-defconfig.patch
    ChangeLog for hostapd since 2.1:
    2014-10-09 - v2.3
    * fixed number of minor issues identified in static analyzer warnings
    * fixed DFS and channel switch operation for multi-BSS cases
    * started to use constant time comparison for various password and hash
    values to reduce possibility of any externally measurable timing
    differences
    * extended explicit clearing of freed memory and expired keys to avoid
    keeping private data in memory longer than necessary
    * added support for number of new RADIUS attributes from RFC 7268
    (Mobility-Domain-Id, WLAN-HESSID, WLAN-Pairwise-Cipher,
    WLAN-Group-Cipher, WLAN-AKM-Suite, WLAN-Group-Mgmt-Pairwise-Cipher)
    * fixed GET_CONFIG wpa_pairwise_cipher value
    * added code to clear bridge FDB entry on station disconnection
    * fixed PMKSA cache timeout from Session-Timeout for WPA/WPA2 cases
    * fixed OKC PMKSA cache entry fetch to avoid a possible infinite loop
    in case the first entry does not match
    * fixed hostapd_cli action script execution to use more robust mechanism
    (CVE-2014-3686)
    2014-06-04 - v2.2
    * fixed SAE confirm-before-commit validation to avoid a potential
    segmentation fault in an unexpected message sequence that could be
    triggered remotely
    * extended VHT support
    - Operating Mode Notification
    - Power Constraint element (local_pwr_constraint)
    - Spectrum management capability (spectrum_mgmt_required=1)
    - fix VHT80 segment picking in ACS
    - fix vht_capab 'Maximum A-MPDU Length Exponent' handling
    - fix VHT20
    * fixed HT40 co-ex scan for some pri/sec channel switches
    * extended HT40 co-ex support to allow dynamic channel width changes
    during the lifetime of the BSS
    * fixed HT40 co-ex support to check for overlapping 20 MHz BSS
    * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
    this fixes password with include UTF-8 characters that use
    three-byte encoding EAP methods that use NtPasswordHash
    * reverted TLS certificate validation step change in v2.1 that rejected
    any AAA server certificate with id-kp-clientAuth even if
    id-kp-serverAuth EKU was included
    * fixed STA validation step for WPS ER commands to prevent a potential
    crash if an ER sends an unexpected PutWLANResponse to a station that
    is disassociated, but not fully removed
    * enforce full EAP authentication after RADIUS Disconnect-Request by
    removing the PMKSA cache entry
    * added support for NAS-IP-Address, NAS-identifier, and NAS-IPv6-Address
    in RADIUS Disconnect-Request
    * added mechanism for removing addresses for MAC ACLs by prefixing an
    entry with "-"
    * Interworking/Hotspot 2.0 enhancements
    - support Hotspot 2.0 Release 2
    * OSEN network for online signup connection
    * subscription remediation (based on RADIUS server request or
    control interface HS20_WNM_NOTIF for testing purposes)
    * Hotspot 2.0 release number indication in WFA RADIUS VSA
    * deauthentication request (based on RADIUS server request or
    control interface WNM_DEAUTH_REQ for testing purposes)
    * Session Info URL RADIUS AVP to trigger ESS Disassociation Imminent
    * hs20_icon config parameter to configure icon files for OSU
    * osu_* config parameters for OSU Providers list
    - do not use Interworking filtering rules on Probe Request if
    Interworking is disabled to avoid interop issues
    * added/fixed nl80211 functionality
    - AP interface teardown optimization
    - support vendor specific driver command
    (VENDOR <vendor id> <sub command id> [<hex formatted data>])
    * fixed PMF protection of Deauthentication frame when this is triggered
    by session timeout
    * internal TLS implementation enhancements/fixes
    - add SHA256-based cipher suites
    - add DHE-RSA cipher suites
    - fix X.509 validation of PKCS#1 signature to check for extra data
    * RADIUS server functionality
    - add minimal RADIUS accounting server support (hostapd-as-server);
    this is mainly to enable testing coverage with hwsim scripts
    - allow authentication log to be written into SQLite databse
    - added option for TLS protocol testing of an EAP peer by simulating
    various misbehaviors/known attacks
    - MAC ACL support for testing purposes
    * fixed PTK derivation for CCMP-256 and GCMP-256
    * extended WPS per-station PSK to support ER case
    * added option to configure the management group cipher
    (group_mgmt_cipher=AES-128-CMAC (default), BIP-GMAC-128, BIP-GMAC-256,
    BIP-CMAC-256)
    * fixed AP mode default TXOP Limit values for AC_VI and AC_VO (these
    were rounded incorrectly)
    * added support for postponing FT response in case PMK-R1 needs to be
    pulled from R0KH
    * added option to advertise 40 MHz intolerant HT capability with
    ht_capab=[40-INTOLERANT]
    * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled
    whenever CONFIG_WPS=y is set
    * EAP-pwd fixes
    - fix possible segmentation fault on EAP method deinit if an invalid
    group is negotiated
    * fixed RADIUS client retransmit/failover behavior
    - there was a potential ctash due to freed memory being accessed
    - failover to a backup server mechanism did not work properly
    * fixed a possible crash on double DISABLE command when multiple BSSes
    are enabled
    * fixed a memory leak in SAE random number generation
    * fixed GTK rekeying when the station uses FT protocol
    * fixed off-by-one bounds checking in printf_encode()
    - this could result in deinial of service in some EAP server cases
    * various bug fixes

Files

/etc/hostapd.accept
/etc/hostapd.conf
/etc/hostapd.deny
/etc/hostapd.eap_user
/etc/hostapd.radius_clients
/etc/hostapd.sim_db
/etc/hostapd.vlan
/etc/hostapd.wpa_psk
/usr/lib/systemd/system/hostapd.service
/usr/sbin/hostapd
/usr/sbin/hostapd_cli
/usr/sbin/rchostapd
/usr/share/doc/packages/hostapd
/usr/share/doc/packages/hostapd/ChangeLog
/usr/share/doc/packages/hostapd/README
/usr/share/doc/packages/hostapd/hostapd.conf
/usr/share/doc/packages/hostapd/wired.conf
/usr/share/licenses/hostapd
/usr/share/licenses/hostapd/COPYING
/usr/share/man/man8/hostapd.8.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Mar 9 12:11:19 2024