Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

limesuite-udev-20.01.0-lp152.1.1 RPM for armv7hl

From OpenSuSE Ports Leap 15.2 for armv7hl

Name: limesuite-udev Distribution: openSUSE Leap 15.2
Version: 20.01.0 Vendor: openSUSE
Release: lp152.1.1 Build date: Fri Feb 21 11:02:19 2020
Group: Hardware/Other Build host: obs-arm-6
Size: 556 Source RPM: limesuite-20.01.0-lp152.1.1.src.rpm
Summary: Udev rules for LimeSDR
Udev rules for Lime Suite






* Wed Jan 29 2020 Martin Hauke <>
  - Update to version 20.01.0
    LimeSuite library changes:
    * Including LimeRFE support
    * Update CGEN calculation to allow lower CGEN values
    * Configure RF switches (when possible) to avoid transmission
      during calibration
    * Automatically reconfigure GFIR LPF after sample rate change
    * Remove LMS_EnableCalibCache function from LimeSuite.h
    * Improve PLL locking in calibration procedures
    * Fix Tx transfer size being set to Rx transfer size
    * Fix RF path being auto-set after it was selected explicitly
      for LimeSDR-Mini
    * Add option to perform Rx phase alignment instead of of always
      running it
    * Improve SXT/SXR tune by automatically retrying with higher
      bias current setting
    * Update FIFO buffers to use memory more efficiently
    * Add oversampling setting
    * Set bandwidth to sample rate if bandwidth is not explicitly set
    * Fix possible segfault when 2 Rx cahnnels are used
    * Pause streaming when changing sample rate
    * Return time error when negative timestmp is used
    * Automatically use wide enough bandwidth setting for RF
      frequencies bellow 30 MHz
    * Remove master clock setting
    * Add setting descriptions
    * Implement read for setting advertised by getSettingInfo()
    * Add panel for LMS API function testing
    * Add option to play WFM file from software
    * fix channel measurement in FFTviewer for Ch.B in MIMO mode
    Octave plugin:
    * Add LimeGetStreamStatus function
    * Add LimeTransceiveSamples function
    * Update antenna selection after loading ini file
    Other changes:
    * Fix LimeQuickTest not outputing to windows command line
  - Add patch:
    * 0001-Remove-some-warnings-LimeRFE-related.patch
* Mon May 13 2019 Martin Hauke <>
  - Update to version 19.04.0
    LimeSuite library changes:
    * Added support for LimeNet-Micro v2.1
    * Fixed Tx ch.B calibration when Rx ch.B is disabled
    * Added save and restore of analog DC/IQ calibration values when
      saving/loading INI file
    * Fixed Rx only mode not working on LimeSDR-USB with sample
      rate <2.5 MSps
    * Fixed Rx only mode not working on LimeSDR-USB with sample
      rate <2.5 MSps
    * change coefficents in LMS7002M::GetTemperature() to approximately
      match actual temperature
    - Updated "Board controls" panel for LimeNet-Micro
    Other changes
    - Added LimeNET-Micro support to LimeQuickTest
    - LimeSDR-USB v1.4 updated to r2.21 gateware
    - LimeSDR-Mini updated to r1.30 gateware
* Thu Mar 07 2019 Martin Hauke <>
  - Upate to version 19.01.0
    LimeSuite library changes:
    * Allow filtering devices by partial serial number
    * Add GPIO control for LimeSDR-Mini
    * Change LMS_VCTCXOWrite() to save value to non-volatile storage
    * Change LMS_VCTCXORead() to read value from non-volatile storage
    * Make some improvements in GFIR setup
    * Fix Tx not working when Rx is disabled on LimeSDR-Mini
    * Add initial support for LimeNET-Micro
    * Add auto RF path selection option (LMS_PATH_AUTO) for
    * Remove LMS_Disconnect() and LMS_IsOpen() functions from API
    * Add support for sending smaller Tx packets (improve end of
      burst handling)
    * Change Rx RF path set by LMS_Init() for LimeSDR-USB to LNA_L
    * Disable Tx channel in LMS_Init()
    * Add GPIO controls to "Board controls" panel for LimeSDR-Mini
    * Add option to "Board controls" panel to write VCTCXO value to
      non-volatile storage
    * Update to soapysdr0.7 module ABI
    * add manual DC/IQ calibrations
    Other changes:
    * LimeUtil: fix LimeSDR-Mini not exiting programming mode after
      flashing FPGA
    * LimeQuickTest: test 1st board when multiple boards are detected
      (instead of exiting)
    * Add Octave plugin to CMake build
    * Add log handler to Octave plugin
    * Add IQ/DC calibration to basicTX example
    * LimeSDR-USB v1.4 updated to r2.20 gateware
    * LimeSDR-Mini updated to r1.29 gateware
* Sat Nov 10 2018
  - Update soapy-module version 0.6 -> 0.7
* Fri Oct 05 2018
  - Upate to version 18.10.0
    LimeSuite library changes:
    * Fix CalibrateTxGain() XBUF settings for 3rd party boards
    * Add interpolation/decimation support for SISODDR mode
    * Always use SISODDR mode for LimeSDR-Mini
    * Fix Rx filter calibration for 2nd channel with low bandwidth
    * Fix index lookup for opt_gain_tbb cache (ChB out of bounds)
    * Add SXT/SXR VCO cache
    * Add FPGA register cache
    * Add connection remote (disabled by default)
    * Fix incorrect TBB gain control behaviour under certain
    * Disable GFIR coefficient ordering based on oversampling when
      coefficient count is to high
    * Remove late timestamp reset commands from Rx streaming loop
    * Update board controls panel
    * Add LPF coefficient calculation controls for GFIRs to TxTSP
      and RxTSP tabs
    Other changes:
    * LimeSDR-USB v1.4 updated to r2.18 gateware
    * LimeSDR-Mini updated to r1.27 gateware
    * Add Tx only LMS API example
    * SoapyLMS: remove stream activity checks
* Wed Jun 13 2018
  - Update to version 18.06.0
    LimeSuite library changes:
    * Fixed zero filled packet transmitted on Tx FIFO timeout
    * Fixed LMS_GetFrequency() to return correct frequency in TDD mode
    * Added HBD/HBI bypass mode for LimeSDR-USB
    * Made automatic Tx gain calibrations less frequent
    * Fixed some issues with GFIR usage
    * Some fixes for LimeSDR-QPCIe
    SoapyLMS changes:
    * Fixed writeSetting to not throw every time
    * Added 'skipCal' stream argument to disable calibration
    * Added 'CALIBRATE' setting for writeSetting()
    Other changes:
    * Added LimeSDR-USB support to LimeQuickTest
    * Added sample format and Tx sync selection to FFTviewer
    * Fix LimeSuiteConfig for debian packages
    * LimeSDR-USB v1.4 updated to r2.17 gateware
    * LimeSDR-Mini v1.1 updated to r1.25 gateware
* Thu Apr 19 2018
  - Update to version 18.04.1
    * Add multiple device support for LimeSDR-Mini
    * Add QuickTest Utility for LimeSDR-Mini
    * Remove calibration cache database
    * LimeSuiteGUI: Remove duplicate information from 'Device Info' panel
  - Remove patch:
    * limesuite-fix-cmake-path.patch (fixed upstream)
* Mon Apr 09 2018
  - Cleanup with spec-cleaner
* Fri Apr 06 2018
  - Update to version 18.04.0
    * Fixed Tx filter calibration
    * Fixed FPGA PLL configuration when B channel is disabled
    * Fixed non-working controls in LimeSuiteGUI 'TRX Gain' tab
    * Changed CGEN VCO tune algorithm
    * LimeSDR-USB v1.4 updated to r2.16 gateware
  - Add patch:
    * limesuite-fix-cmake-path.patch
  - Update to version 18.03.0
    SoapyLMS changes:
    * Do not tune NCO when LO is within tuning range
    * Filter BW reported to match filtersCalibration
    * Function implementations changed to use same code as LMS API
    LimeSuiteGUI changes:
    * Added log levels
    * Added additional controls to SPI panel
    * Reduced number of programming modes in Programming panel
    LimeSuite library changes:
    * Added LimeSDR-Mini programming
    * Changed default settings for LimeSDR-Mini
    * Updated calibrations
    * Add phase alignment for dual channel configuration
    * Updated FPGA PLL configuration
    * Fix B channel only streaming
    * Fixed LMS7002M::GetPathRFE for LNAH case
    * Fixed CGEN not tuning to 484-487 MHz
    LMS API changes:
    * LMS_Open() can no longer succeed without connecting to hardware
    * LMS_Disconnect() and LMS_IsOpen() are now deprecated because of above change
    * Changed firmware/gateware programming functions
    * Changed lms_dev_info_t structure
    * LMS_SetLOFrequency() now attempts to set different frequencies for A/B channels using NCO
    * Fix Rx NCO direction flip (downconvert flag used to set Rx NCO to upconvert)
    * Disabling LPF is now same as setting it to maximum bandwidth
    * Extented gain range for LMS_SetGaindB()
    Other changes:
    * Reduce SIMD flags when packaging for x86
    * LimeSDR-USB v1.4 updated to r2.15 gateware
    * LimeSDR-Mini v1.1 updated to r1.24 gateware
  - Add limesuite-fix-cmake-path.patch
* Tue Dec 19 2017
  - Update to version 17.12.0
    SoapyLMS changes:
    * Force MIMO alignment
    * Add TBB frontend gain configuration
    * Fix/adjust gain ranges
    LMS API changes:
    * Increased USB timeouts
    * Updated FTDI library (LimeSDR-Mini on Windows)
    * RF switch control for LimeSDR-Mini
    * Updated setup/destruction of streams
    * various bug fixes
    LimeSuiteGUI changes:
    * Update LimeSDR-Mini panel
* Sun Nov 05 2017
  - Update descriptions.
* Sat Oct 21 2017
  - Use SSE-SIMD-FLAGS only on x86_64 machines
* Thu Oct 19 2017
  - Update to version 17.10.0
    SoapyLMS changes:
    * Initial support for LimeSDR-Mini
    * Disable calibration cache by default
    LMS API changes:
    * Initial support for LimeSDR-Mini
    LimeSuiteGUI changes:
    * Added scrollbars
    * Fix multiple crashes that occured when board is not connected
    * Bring window to front when trying to open already opened window
    * Some cosmetic GUI changes
    * Added default config button to GUI
    Other changes:
    * LimeSDR v1.4 updated to r2.11 gateware
  - Build with -DENABLE_SIMD_FLAGS="SSE4.2" to avoid the new default
    optimization settings "-mmarch=native" otherwise it the binaries
    are expected to crash on machines different from the build hosts.
* Sun Oct 01 2017
  - Update to version 17.09.1
    SoapyLMS changes:
    - SoapyLMS7 caches stream enable and disables on close
    - Fixed late packet reporting in SoapyLMS7 stream status
    LMS API changes:
    - Added simple GPIO example utilizing functions from LimeSuite.h
    - Fixed WriteStream() end of burst flushing in fifo.h
    - Fixed abs() overload compiler issue in lms7_device.cpp
    - Removed private include in mcu_program/host_src/main.cpp
    - Fixed error checking bug causing compilation error on MacOS in
      LMS_GetGaindB() and LMS_GetNormalizedGain()
    Other changes:
    - LimeSDR v1.4 updated to r2.10 gateware
  - Update to version 17.09.0
    LimeSuite library changes:
    - Added transfer size adjustment based on sample rate
    - Improved MCU calibration procedures
    - Initial support for LimeSDR-QPCIe
    - Changed format to 16 bit for data transfer when float (non-native) format
      is selected in API
    LMS API changes:
    - Added external reference clock(LMS_CLOCK_EXTREF) configuration to
    - Change LMS_SetGaindB() and LMS_SetNormalizedGain() to select optimal
      TBB gain for TX
    - Fixed LMS_GetStreamStatus() not returning some status values
    LimeSuiteGUI changes:
    - Unified read/write params in board controls panel
    - Fixed some GUI fields not updating correctly/reporting wrong values
    Other changes:
    - LimeSDR v1.4 updated to r2.9 gateware
    - Added LMS API doxygen generation to CMake
    - Added CMake option to enable compiler SIMD flags
* Wed Jun 21 2017
  - Update to version 17.06.0
    API additions:
    - LMS_GPIODirRead
    - LMS_GPIODirWrite
    - LMS_CalibrateInternalADC
    - LMS_CalibrateAnalogRSSIDC
    - LMS_CalibrateRP_BIAS
    - LMS_CalibrateTxGain
    - LMS_SetClockFreqWithSpurCancelation
    General changes:
    - SoapyLMS7 - added getMasterClockRates()
    - SoapyLMS7 - added getSampleRateRange()
    - LimeSDR v1.4 updated to r2.8 gateware
    - GPIO support in SoapyLM7 module
    - Library level logging support
    - Speed up x640,x641 spi
    - FFTviewer: add checkbox for RX->TX loopback control
    - Merged major MCU based calibrations update
* Fri May 05 2017
  - Update soapy-module version 0.5-2 -> 0.6
* Wed May 03 2017
  - Update to version 17.02.2
    - Fixed register typo in LMS7002M::SetTxDCOffset()
    - Added option defaults for stream args in SoapyLMS7
    - Fixed LMS7002M::GetPathRFE() currently selected path
* Wed Apr 19 2017
  - initial package, version 17.02.1



Generated by rpm2html 1.8.1

Fabrice Bellet, Mon May 9 13:51:24 2022