Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

smartmontools-6.6-lp151.4.3 RPM for armv7hl

From OpenSuSE Ports Leap 15.1 for armv7hl

Name: smartmontools Distribution: openSUSE Leap 15.1
Version: 6.6 Vendor: openSUSE
Release: lp151.4.3 Build date: Thu Apr 25 06:10:40 2019
Group: Hardware/Other Build host: armbuild02
Size: 1711008 Source RPM: smartmontools-6.6-lp151.4.3.src.rpm
Summary: Monitor for SMART devices
SMARTmontools controls and monitors storage devices using the
Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.)
built into ATA, SATA and SCSI Hard Drives. This is used to check the
hard drive reliability and to predict drive failures. The suite
contains two utilities. The first, smartctl, is a command line utility
designed to perform simple S.M.A.R.T. tasks. The second, smartd, is a
daemon that periodically monitors the smart status and reports errors
to syslog. The package is compatible with the ATA/ATAPI-3 to -7
specification. The package is intended to incorporate as much "vendor
specific" and "reserved" information as possible about disk drives. The
commands man smartctl and man smartd will provide more information.






* Tue Apr 17 2018
  - Fix SUSE default of S.M.A.R.T. checks: really enable nightly
    short tests (bsc#1073918).
* Thu Feb 08 2018
  - Make possible to disable broken SAT support by -d scsi+cciss,N
    (bsc#1038271, smartmontools-scsiata-scsi_only.patch,
  - Update smartmontools.keyring.
* Mon Dec 18 2017
  - update to 6.6 version (FATE#321901, FATE#322874)
    - smartctl:
    * -i' and '--identify': ATA ACS-4 and SATA 3.3 enhancements.
    * Control ATA write cache through SCT Feature Control
      with '-s wcache-sct,ata|on|off[,p]' and '-g wcache-sct'.
    * Print ATA Pending Defects log with '-l defects'.
    * '-s wcreorder,on|off': New persistent flag ',p'.
    * '-s standby': Prevent temporary drive spinup.
    * '-n POWERMODE': New parameter to set exit status.
    * '-g security': ATA Security Level check fixed.
    * '-l scttemp*': Print minimum supported ERC Time Limit.
    * '-q noserial': Now also suppresses "SAS address" output.
    * '-i': Print IEEE EUI-64 of NVMe namespace.
    * '-c': Print NVMe 1.3 feature flags.
    * '-A': Print NVMe 1.3 thermal temperature transition
    * '-g/s dsn': Get/set ATA DSN.
    - smartd
    * Uses also device identify information to detect for duplicate
    * '-e dsn' directive: Set ATA DSN.
    * Improved SCSI/SAS temperature logging.
    * Silence emails and log messages on open errors of
      '-d removable' devices.
    * Exit on device open error unless '-q never' or '-d removable'
      is specified (regression).
    - update-smart-drivedb: Now authenticates downloaded file with GnuPG.
    - update-smart-drivedb: New options '--trunk', '--no-verify' and
    - Device type '-d intelliprop,N' for IntelliProp controllers.
    - SCSI: Default timeout increased to 1 minute.
    - configure: New options '--with-gnupg', '--with-scriptpath' and
    - configure: Checks for C++11 support option and requires
      '--with[out]-cxx11-option' if option unknown or no C++11 support.
    - HDD, SSD and USB additions to drive database.
    - New smartmontools-* mailing list addresses.
    - Man page formatting reworked.
    - Linux:
    * Uses SG_IO V4 API if supported.
    * Devices behind hpsa driver are no longer detected as regular
      SCSI devices.
    - Darwin: Initial NVMe support based on undocumented API.
    - FreeBSD:
    * Fix panic on INVARIANTS enabled kernel.
    * Improve ATA SMART STATUS check for legacy controllers.
    * Compile fix for FreeBSD-11 and newer.
    - NetBSD:
    * NVMe support.
    * Full 28-bit ATA support.
    * Compile fix.
    * Use a raw disk device file.
    - OpenBSD: Compile fix.
    - OS/2: Support for the OS2AHCI driver, updating source code,
      adding autoscan support, adding self-test support.
    - Windows fixes:
    * Support for Windows 10 NVMe driver (stornvme.sys).
    * Fix CSMI access for IRST driver 15.2.
    * smartd: Ability to run PowerShell scripts with '-M exec'.
    * smartd: New PowerShell script to send smartd warning emails
      without external tools.
    * package now provides PDF man pages.
  - switch to new url
  - drop upstreamed patches:
    * smartmontools-scsi-suppress-no-temperature.patch
    * smartmontools-scsi-temperature-check.patch
    * smartmontools-log-scsi-temperature.patch
  - regen smartmontools-drivedb.h
* Thu Nov 23 2017
  - Replace references to /var/adm/fillup-templates with new
    %_fillupdir macro (boo#1069468)
* Fri Jul 14 2017
  - SCSI temperature error fixes (bsc#1047198,
* Mon Dec 19 2016
  - Drop systemd dependency on (bsc#983938,
* Wed Dec 07 2016
  - update to 6.5 version
    * Experimental support for NVMe devices on FreeBSD, Linux and Windows.
    * smartctl '-i', '-c', '-H' and '-l error': NVMe support.
    * smartctl '-l nvmelog': New option for NVMe.
    * smartd.conf '-H', '-l error' and '-W': NVMe support.
    * Optional NVMe device scanning support on Linux and Windows.
    * configure option '--with-nvme-devicescan' to include NVMe in
    * default device scanning result.
    * Device scanning now allows to specify multiple '-d TYPE' options.
    * ATA: Added new POWER MODE values introduced in ATA ACS-2.
    * ATA: SCT commands are no longer issued if ATA Security is locked.
    * SCSI: LB provisioning improvements.
    * SCSI: Fixed GLTSD bit set/cleared info messages.
    * SCSI: Solid State media log page is no longer checked for tapes.
    * SCSI: Improved handling when no tape cartridge in drive.
    * SCSI: Workaround for buggy Seagate firmware.
    * SAT: Improved heuristics to detect bogus sense data from SAT layer.
    * smartd: Fixed crash on missing argument to '-s' directive.
      update-smart-drivedb: Now uses HTTPS for download by default.
    * update-smart-drivedb: New options to select URL and download tool.
    * update-smart-drivedb: New download tool 'svn'.
    * configure option '--without-update-smart-drivedb' to disable
      update-smart-drivedb script.
    * configure options '--disable-drivedb', '--enable-savestates',
      '--enable-attributelog' and '--with-docdir' are no longer supported.
    * autoconf < 2.60 and automake < 1.10 are no longer supported.
    * Drive database file now also includes the DEFAULT setting
      for each attribute.
    * HDD, SSD and USB additions to drive database.
    * Darwin: New support files for package installer.
    * New makefile target 'install-darwin' builds DMG image.
    * Solaris: Auto detection of SATA devices behind SAT layer.
    * Solaris SPARC: Legacy ATA support disabled by default.
      New configure option '--with-solaris-sparc-ata' enables it.
      File os_solaris_ata.s is no longer included in source tarball.
    * Windows: Auto detection of USB devices specified by drive letter.
    * Windows: Device scanning does no longer ignore unknown USB devices.
    * Windows: Prevent drive spin up by '-n standby' check.
    * Windows: New application manifests indicating Win 10 support.
    * Windows smartd: '-m [sys]msgbox' is no longer supported.
    * Windows installer: Defaults to 64-bit version on 64-bit Windows.
    * Various code changes suggested by Clang Static Analyser and Cppcheck.
  - enable "--with-nvme-devicescan" option
  - update smartmontools-drivedb.h file
  - use --with-savestates, --with-attributelog, --docdir instead of old options
* Thu Jan 14 2016
  - replaced keyring with 2015/2016 key.
    pub   rsa2048/0xDF0F1A49C4A4903A 2014-12-31 [verfällt: 2016-12-31]
    Schl.-Fingerabdruck = F41F 01FC 0784 4958 4FFC  CF57 DF0F 1A49 C4A4 903A
    uid                [  unbekannt] Smartmontools Signing Key (through 2016) <>
* Sun Jan 10 2016
  - Update to version 6.0.4
    * Device type '  *d usbprolific' for Prolific PL2571/277x USB bridges.
    * SAT: Support for ATA registers returned in fixed format sense data.
    * smartctl '  *i' and '  *  *identify': ATA ACS  *4 and SATA 3.2 enhancements.
    * smartctl '  *l xerror': Support for logs with more than 255 pages.
    * smartctl '  *l devstat': Prints ACS  *3 DSN flags.
    * smartctl '  *l devstat': Read via SMART command if GP log is not
    * smartctl '  *l scttempsts': Prints SCT SMART STATUS (ACS  *4) and
      vendor specific SCT bytes.
    * configure option '  *  *with  *systemdenvfile=auto' as new default.
    * configure options '  *  *disable  *drivedb', '  *  *enable  *savestates'
      and '  *  *enable  *attributelog' are deprecated.
    * Corresponding '  *  *with  **' options are enhanced accordingly.
    * Configure option '  *  *with  *docdir' is deprecated.
    * autoconf < 2.60 and automake < 1.10 are deprecated.
      (all of the above still work but a warning is printed if used)
    * HDD, SSD and USB additions to drive database.
    * Linux: AACRAID fixes, SMART STATUS should work now.
    * Linux: '/dev/megaraid_sas_ioctl_node' fd leak fix.
    * Darwin: '  *S' command implemented, '  *l devstat' should work now.
    * Cygwin: Compile fix.
    * Windows: Device type '  *d aacraid' for AACRAID controllers.
    * Windows: SAT autodetection based on IOCTL_STORAGE_QUERY_PROPERTY.
    * Windows installer: Fix possible loss of user PATH environment variable.
  - Update smartmontools-drivedb.h to the latest version from the
    upstream branch RELEASE_6_4_DRIVEDB.
  - Cleanup and remove conditional macros; the package doesn't build
    for SLE anyway
  - Remove smartmontools-default-enabled.patch; not needed anymore
* Tue Mar 10 2015
  - Run Self Tests:
    * Short Self Test every night
    * Extended Self Test every month
    * Discussion:
  - Dropped smartmontools-removable.patch
  - Created smartmontools-suse-default.patch
* Mon Mar 09 2015
  - Package empty /etc/smartd_warning.d for warning plugins.
  - Fix default branch name.
  - Comment fixes.
* Tue Mar 03 2015
  - Improve drivedb.h update scriptlets: Detect update across
  - Check state of smartmontools-drivedb.h in %prep.
  - Add ghost records for files created by update-smart-drivedb.
  - Improve script: Perform spec
    file changess.
  - Clean up on uninstall.
  - Update smartmontools-drivedb.h to the latest version from the
    upstream branch RELEASE_6_3_DRIVEDB.
* Fri Nov 14 2014
  - No longer perform gpg validation; osc source_validator does it
    + Drop gpg-offline BuildRequires.
    + No longer execute gpg_verify.



Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Apr 9 12:04:41 2022