Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

typelib-1_0-UpowerGlib-1_0-0.99.7-lp150.1.2 RPM for ppc64le

From OpenSuSE Ports Leap 15.0 for ppc64le

Name: typelib-1_0-UpowerGlib-1_0 Distribution: openSUSE Leap 15.0
Version: 0.99.7 Vendor: openSUSE
Release: lp150.1.2 Build date: Wed May 9 07:28:40 2018
Group: System/Daemons Build host: obs-power8-02
Size: 12260 Source RPM: upower-0.99.7-lp150.1.2.src.rpm
Summary: Power Device Enumeration Framework - Introspection bindings
UPower is an abstraction for enumerating power devices, listening to
device events and querying history and statistics. Any application or
service on the system can access the org.freedesktop.UPower service
via the system message bus. Some operations (such as suspending the
system) are restricted using PolicyKit.

This package provides the GObject Introspection bindings for






* Thu Nov 30 2017
  - Update to version 0.99.7:
    * New features:
      + Add support for Bluetooth LE device batteries
      + Allow to be replaced via --replace,-r
    * Bugfixes:
      + Fix critical action after resume from hibernate
      + Fix compilation with libimobiledevice git
  - Changes for version 0.99.6:
    * New Features:
      + Add UP_DEVICE_KIND_GAMING_INPUT for gaming devices
      + Detect joysticks as gaming input devices
    * Bugfixes:
      + Correctly close inhibitor FD
      + Fix crash when '@' is present in the device name
      + Fix lid detection on FreeBSD
      + Grab the model name from device if unavailable from battery
  - Refresh upower-hibernate-insteadof-hybridsleep.patch
* Mon Jul 24 2017
  - Update to version 0.99.5:
    + New Features:
    - Add a more complete self test for HID++ devices.
    - Add BatteryLevel property for devices with a finite number of
      power levels.
    - Add support for pausing and resuming of the daemon poll.
    - Get a serial number for device batteries.
    - Refresh devices after waking up from sleep.
    + Bugfixes:
    - Add proper error and cancellable handling to UpClient
    - Do not spin in a loop when /proc/timer_stats cannot be
    - Exit early from up-tool when connecting to upower fails.
    - Expand the integration-tests to run in more environments.
    - Fix reading and writing the keyboard brightness level.
    - Fix -Wformat-y2k compilation errors.
    - Lower initial power usage when iDevice isn't accessible.
    - Simplify string checks in upower-glib.
  - Drop upower-fix-get-critical-crash.patch: Fixed upstream.
* Tue Mar 28 2017
  - Own udev directories on SLE, as SLE12 filesystem package
    doesn't own them. Require udev-devel in order to set _udevdir.
* Wed Oct 12 2016
  - Add upower-hibernate-insteadof-hybridsleep.patch:
    + Set the system per default to hibernate, not hybridsleep. If
      the battery is going to be empty soon, there is no reason
      any longer to attempt to HybridSleep, which quite some hardware
      seems to get wrong. Simply hibernate, get the data on the disk
      and switch off (boo#985741).
* Fri Apr 15 2016
  - Align BuildRequires with what configure looks for and version
    - Replace dbus-1-glib-devel, libgudev-1_0-devel,
      libimobiledevice-devel, libusb-devel and pkgconfig(udev)
    - with libtool, pkgconfig(dbus-glib-1), pkgconfig(gio-2.0),
      pkgconfig(gio-unix-2.0), pkgconfig(glib-2.0),
      pkgconfig(gobject-2.0), pkgconfig(gudev-1.0),
      pkgconfig(libimobiledevice-1.0), pkgconfig(libplist) and
  - Stop exporting V=1, we do debugging locally, so lets not clutter
* Thu Apr 14 2016
  - Add upower-fix-get-critical-crash.patch: daemon: fix
    get_critical_action(), without this upower daemon will crash when
    trying to take action (boo#975653, fdo#94262).
* Wed Feb 17 2016
  - Update to version 0.99.4:
    + Add support for Logitech G700s/G700 Gaming Mouse.
    + Port to GDBus.
    + Support g_autoptr() for all libupower-glib object types.
    + Add critical action support for *BSD.
    + Change the default low battery policy to percentage.
    + Fix deprecation warning in integration-test.
    + Fix memory leak in up_client_get_devices().
    + Fix possible double-free.
    + Update HID rules and fix build regression.
* Fri Jun 19 2015
  - Update to version 0.99.3
    * Bail out when iDevice state is malformed (Bastien Nocera)
    * Defer getting iDevice info until ready (Bastien Nocera)
    * Fix crash on uninitialized variant (Vlad Orlov)
    * Fix libimobiledevice msg in configure (Bastien Nocera)
    * More memory handling fixes in iDevice (Bastien Nocera)
    * Properly detect bluetooth mice and keyboards that are HID
      devices (Marc Deslauriers)
    * Support Logitech Unifying in Linux 3.19 (Peter Wu)
    * Work-around broken battery on the Onda v975w (Bastien Nocera)
  - Add missing rcsymlink
  - Remove old provides/obsoletes
  - Do not recommend obsolete pm-utils
* Fri Dec 19 2014
  - Update to version 0.99.2:
    + Bugfixes:
    - Avoid unaligned memory access in hidpp-device
    - Bump GLib min req to 2.34
    - Correct check to prevent the display of invalid ASCII codes
    - Fencepost array access error
    - Fix cleanup in up_device_idevice_coldplug/finalize
    - Fix crash if there is no session D-BUS
    - Fix error handling for Python 3.4
    - Fix various memory and reference leaks
    - Release resources at shutdown
    - Respect the CriticalPowerAction config option
    - Set update-time on the aggregate device
    - Split out updating on_battery and warning_level
    - Update aggregate device on battery removal
    - Update display device when battery is removed
    - Use g_get_real_time() when possible
  - Restore Source URL
  - Remove autoconf, automake and libtool BuildRequires, not needed
* Thu Dec 04 2014
  - Update to latest git head, to resolve various memleaks,
    (fdo#82659, boo#904520)
  - Added autoconf, automake and libtool BuildRequires, needed with
    git packaging
  - Comment out the full Source URL, the updated tarball is not
    available at fdo URL
* Thu Aug 21 2014
  - Update to version 0.99.1:
    + New Features:
    - Remove IsDocked property
    - Remove unused polkit dependency
    + Bugfixes:
    - Create the history directory at runtime
    - Do not log a critical warning when using
    - Fix API doc for up_client_get_on_battery()
    - Fix possible UpHistoryItem leak on failure
    - Fix segfault on getting property when daemon is not running
    - Fix shutdown on boot on some machines
    - Fix small memleak on startup with Logitech devices
    - Free the obtained device list array after use
    - Update lid status when updating AC status
  - Remove upower-fix-leaks.patch: fixed upstream.
  - Adjust package name, since LT_CURRENT is now 3
* Fri Aug 01 2014
  - Add upower-fix-leaks.patch: fix a couple of memory leaks.
* Sun Nov 24 2013
  - define _udevrulesdir only if not already defined
  - run %udev_rules_update, if defined.
* Sun Nov 03 2013
  - Update to version 0.99.0:
    + Notes:
    - This version contains major API changes. Use the 0.9.*
      versions if you want to keep using the old API.
    + New Features:
    - Add WarningLevel and IconName properties to all devices
    - Add DisplayDevice composite battery
    - Enforce critical battery policy on the daemon side
    + Bugfixes:
    - Reduce client-side and daemon-side wake-ups
    - Emit PropertiesChanged signals
    - Register objects on the bus once they've been setup
    - Clamp percentage for overfull batteries
    + Feature Removals:
    - Remove battery recall support
    - Remove QoS support
    - Remove OnLowBattery property (use WarningLevel instead)
    - Remove DeviceChanged and Changed signals (PropertiesChanged
      signals are sent instead)
* Sun Oct 20 2013
  - Update to version 0.9.23:
    + Bugfixes:
    - Add missing dbus-glib-1 to private requires
    - Disable Watts-Up devices by default
    - Really don't overwrite retval with prop values
    - Update and correct Toshiba recall list
    - daemon: Avoid trying to close fd that wasn't opened
    - daemon: Fix options parsing
    - daemon: Include config.h in up-backend.h
    - lib: Add missing "element-type" introspection metadata
    - lib: Fix a small memory leak
    - lib: Fix crasher calling _about_to_sleep_sync()
    - linux: Don't guess discharging state for devices
    - linux: Don't print a warning if the status attr is missing
    - linux: Opt-out of checking Watts Up devices earlier
    - openbsd: Use g_thread_try_new
    - openbsd: recognize when battery is absent
* Tue Oct 08 2013
  - Update to version 0.9.22:
    + New Features:
    - Add temperature property for batteries
    + Bugfixes:
    - Fix error handling in up_client_get_properties_sync()
    - Make GetHistory() array order consistent
    - Fix crash with bluetooth input devices
    - Lots of fixes/rework for Logitech wireless input devices
    - Allow valid UTF-8 encoded properties
    - Detect the battery of bluetooth input devices
    - Only one warning if no valid voltage found
    - openbsd: Do not call g_thread_init()
* Fri Jul 26 2013
  - Update to version 0.9.21:
    + New Features:
    - Add support for Logitech Wireless (NonUnifying) devices
    - Use PIE to better secure installed tools and also use
      full RELRO in the daemon
    + Bugfixes:
    - Allow clients to call org.freedesktop.DBus.Peer
    - Detect udev rules dir
    - Drop --enable-systemd and linking to libsystemd-daemon
    - Find hidraw devices correctly with systemd udev >= v196
    - Fix test for logind availability
    - Update the upower man page with all the current options
  - Dropped systemd define, systemd usage is now detected at runtime
  - Pass %{_udevrulesdir} to %configure, instead of %makeinstall
  - Unconditionally install
  - Dropped pkgconfig(libsystemd-daemon) BuildRequires, not needed
    with this release
* Sat Apr 06 2013
  - Add --enable-deprecated flag (bnc#813883) which restores
    upowers sleep/resume funcionality
* Mon Mar 18 2013
  - Update to version 0.9.20:
    + New Features:
    - Add a --enable-deprecated configure argument to remove pm-utils
    - Deprecate running the powersave scripts
    - Factor out the Logitech Unifying support to support other
    - Require applications to define UPOWER_ENABLE_DEPRECATED to use
      deprecated functionality
    + Bugfixes:
    - Bump maximum accepted "time to empty" to 10 days
    - Don't use the deprecated INCLUDES in
    - Fix batteries which report current energy but full charge
    - Fix K750 features name, use 1 second interval
    - Fix memory leak in up_polkit_get_subject
    - Fix two memory leaks
    - integration-test: Always run on a fake system bus
    - integration-test: Move to using umockdev
    - Never use -WError when building
    - Raise the hard PolicyKit dep to 0.97
* Fri Jan 04 2013
  - Update to version 0.9.19:
    + New Features:
    - Add a Documentation tag to the service file
    - Add luminosity property
    - Add support for Logitech Unifying devices
    + Bugfixes:
    - Always return 0 from
    - Do not continue to poll if /proc/timer_stats is not readable
    - Fix "can-hibernate" formatting in upower --dump
    - Fix device matching for recent kernels
    - Fix srcdir != builddir
    - Send resume signal when built with systemd and using pm-utils
    - Drop upower-fix-resume-no-systemd.patch, merged upstream
* Wed Nov 21 2012
  - Add 'pm-utils' to Recommends; gnome-power-manager and
    mate-power-manager (at least) use upower for some features, some
    features like suspend/hibernate only show if 'pm-utils' is also
    installed. See bnc#790787. I believe this is an improvement.
  - Add macro systemdutildir and fix broken build and drop FIXME
* Sun Nov 04 2012
  - Enable systemd support, now we have version 195
* Wed Oct 17 2012
  - Fix build with new udev rules location
* Mon Sep 17 2012
  - Pass --disable-systemd to configure if we don't build systemd
    support. Fix bnc#780709.
* Tue Sep 11 2012
  - Update to version 0.9.18:
    + New Features:
    - Use systemd if possible for suspend and hibernate
    + Bugfixes:
    - openbsd: Properly initialize update-time when creating
  - Changes from version 0.9.17:
    + New Features:
    - Fail on CRITICALs in the integration-test
    + Bugfixes:
    - Drop 'type' parameter from CancelRequest() signature
    - Fix the LatencyChanged signal
    - Fix use-after-free of qos item
    - Fix wrong PowerSupply property for devices without a scope
      sysfs attribute
    - linux:
      + Don't allow non-power-supply devices to set the OnBattery
      + Remove obsolete check for magicmouse_ and duplicated wacom_
      + Treat the battery state 'not charging' as PENDING_CHARGE
    - Selectively disable warnings for deprecated GValueArray
  - Drop xz BuildRequires as it now comes for free in the build
  - Get ready for full-switch to systemd for suspend and hibernate:
    + Add a with_systemd macro, currently set to 0 as we would need
      systemd >= 183, which we don't have right now.
    + Add pkgconfig(libsystemd-daemon) BuildRequires if we build
      systemd support.
    + Pass --enable-systemd to configure if we build systemd support.
    + Do not install /lib/systemd/system-sleep/ if we
      don't build with systemd support.
  - Add upower-fix-resume-no-systemd.patch: fix resuming when not
    booted with systemd.
* Fri May 11 2012
  - Update to version 0.9.16:
    + New Features:
    - Add boolean RunPowersaveCommand to UPower.conf
    - Install a systemd service file if systemd is used
    + Bugfixes:
    - Clamp the UPS percentage from 0 to 100 to fix syslog spam
    - Correct the cap on the energy rate
    - Do not print error message for missing /etc/crypttab
    - Fix crash in up_device_csr_finalize
    - Never detect HID devices with batteries as power supplies
    - Re-coldplug dock status when resuming from sleep
    - Return all history records for a timespan of zero
    - libupower-glib: fix small memory leak
    - libupower-glib: srcdir != builddir fix
    - OpenBSD fixes
  - Correctly package systemd service file:
    + Add pkgconfig(systemd) BuildRequires.
    + Use %{?systemd_requires} and add %service_add_{pre,post} and
      %service_del_{preun,postun} in scriptlets.
* Wed Feb 15 2012
  - Move dbus xml interface files from devel subpackage to main
    subpackage: those files might be needed at runtime.
* Mon Jan 09 2012
  - Remove glib2-devel Requires from libupower-glib-devel: it will
    automatically be added the pkgconfig() way.
* Mon Jan 09 2012
  - Split typelib file into typelib-1_0-UpowerGlib-1_0 subpackage.
  - Add typelib-1_0-UpowerGlib-1_0 Requires to libupower-glib-devel.
* Fri Dec 16 2011
  - Update to version 0.9.15
* Tue Oct 04 2011
  - Update to version 0.9.14:
    + New Features:
    - Filter the debugging details unless --verbose is specified
    + Bugfixes:
    - Fix linux up_backend_supports_sleep_state() return code
    - Fix the kFreeBSD detection
* Tue Sep 06 2011
  - Update to version 0.9.13:
    + New Features:
    - Modernize build system.
    + Bugfixes:
    - Avoid warnings about missing annotations
    - Don't rely on files' presence to define the default backend
    - Fully port the test suite to use GObject Introspection
    - Hardcode wacom battery devices as not power-supply devices
    - Use autoreconf instead of custom script
    - Use g_unix_signal_add_full() which has been renamed in GLib
* Sat Jul 23 2011
  - Fixed typo in description of upower.spec
* Tue Jul 05 2011
  - Update to version 0.9.12:
    + Bugfixes:
    - Fix how we estimate the device rate for batteries that do not
      provide this data
    - Add AC_PROG_LIBTOOL as advised by autotools
    - Add openbsd missing includes for close and strcmp
    - Silence some openbsd warnings about unused vars and bad
      return values
  - Add xz BuildRequires because we can't build a package for a
    xz-compressed tarball without explicitly specifying that... See
    bnc#697467 for more details.
* Tue Jun 14 2011
  - Update to 0.9.11:
    + New feature:
    - Add new NotifySleep() and NotifyResume() signals that include
      the sleep type
    + Bugfixes:
    - Ensure up-apm-native.h gets shipped in the tarball for
    - Check energy vs. charge in the Linux integration tests
    - Only include glib-unix.h if the GLib version is >= 2.29.4
    - Respect $PYTHON for running the test suite
    - Run subset of tests when system D-BUS is not available
* Tue May 24 2011
  - Update to version 0.9.10:
    + New Features:
    - Add a config option 'IgnoreLid' for users with broken lid
    - Add integration test suite for Linux
    - Add option to run daemon on the session bus for testing
    - Add OpenBSD backend which uses the APM_IOC_GETPOWER ioctl()
    - Support virtual UPS devices for testing
    + Bugfixes:
    - Consider a discharging UPS as "on battery"
    - Do not overwrite aclocal flags in autogen, fdo#35261
    - Fix "unknown" battery status guessing to not be recursive
    - Respect $UPOWER_CONF_FILE_NAME in up_config_init
    - Support batteries that report both energy and charge
    - upower needs -pthread
    - Use the new threadsafe signal handling support in GLib
    - Wuninitialized needs -O
* Thu Mar 24 2011
  - Update to version 0.9.9:
    + New Features:
    - Add a config option to disable the Watts Up Pro device
    - Add a LidForceSleep property to ensure that we don't melt any
    - Add an option for polling dock devices in UPower.conf,
      defaulting to false.
    + Bugfixes:
    - Depend on stable GUdev API
    - Drop devkit and devkit-power-daemon symlinks
    - Fix bitmap check in the input code
    - Honour ACLOCAL_FLAGS in
  - Drop DeviceKit-power subpackage and obsolete old version of it.
* Sun Jan 09 2011
  - Update to version 0.9.8:
    + New Features:
    - Add an IsDocked binary property to the main interface
    - Use the number of active DRM devices to determine the system
      docked status
    + Bugfixes:
    - Add method to set history dir
    - Check for and link against libplist
    - Drop check for polkit-backend again
    - Fix compilation error against Linux 2.6.36
    - Fix links to git repository in HACKING
    - Fix self check to work as non-root
    - Re-add AM_MAINTAINER_MODE (but enable it by default)
    - Reduce race condition in history purging self check
    - Support the power_now sysfs attribute to get time remaining
      on new kernels
    - Update the list of HID UPS devices
* Wed Nov 10 2010
  - Update to version 0.9.7:
    + New Features:
    - Add support for controlling leds keyboard backlights
    - Port from EggDebug to the GLib built-in logging framework
    + Bugfixes:
    - Fix building with gobject-introspection 0.9.10
    - Fix up all the warnings when building with new versions of
    - Keyboard backlight of zero is not an error
    - libupower-glib: Reject invalid object paths to avoid
      asserting libdbus
    + Updated translations.
  - Add gobject-introspection-devel BuildRequires to build
    introspection data.
* Sun Oct 31 2010
  - Use %_smp_mflags
* Tue Oct 05 2010
  - Update to version 0.9.6:
    + Remove devkit-power-gobject
    + Bugfixes:
    - Allow explicitly disabling libimobiledevice support
    - Free GErrors after returning them
    - Add missing D-Bus return in up_qos_cancel_request()
    - Fix double D-BUS return in up_daemon_*_allowed
    - Fix up_polkit_get_subject() D-BUS error return
    - Ensure the new device types get valid descriptions in upower
    - -dump
    - Fix compile with the latest PolicyKit release
    - Only save by default 7 days data to stop the log files
      becoming huge. Fixes rh#634228
    - Do not continue to poll the serial port if there is no Watts
      Up Pro adaptor
    - Fix the build with new versions of gobject-introspection
  - Drop upower-fix-crash.patch: fixed upstream.
  - Remove libdevkit-power-gobject1, libdevkit-power-gobject-devel
* Tue Sep 28 2010
  - Recommend instead of require lang-package.
* Wed Sep 22 2010
  - Add upower-fix-crash.patch to fix a crash with recent versions of
    polkit. Fix bnc#640940.
* Fri Jul 16 2010
  - Update to version 0.9.5:
    + New Features:
    - Add battery query support for iDevices
    - Assign names to our idle sources when using new versions of
    - Dynamic testing for enough hibernate swap
    - Port UPower to libusb1 to avoid unfixable crashes
    - Port to GTest
    - Get the powersave command from the backend rather than
      hardcoding Linux specifics
    + Bugfixes:
    - Update the list of supported TrippLite HID Power Devices
    - Fix a potential daemon crash. Fixes fdo#27902
    - Fix up a potential crasher in the CSR device code
    - When calculating used swap space, only use anonymous pages
    - Use pm-is-supported to test if various sleep modes are
  - Add libimobiledevice-devel BuildRequires for the iDevices
* Mon Jun 21 2010
  - Update to version 0.9.4:
    + New Features:
    - Detect when the kernel changes the reported charge units.
      Fixes rh#587112
    + Bugfixes:
    - Only emit ::Sleeping() after we've checked AboutToSleep
    - Ensure we send ::Sleeping() if clients do not call
    - Ensure we sent ::notify signals when UpDaemon properties
  - Changes from version 0.9.3:
    + New Features:
    - Add a config file with SleepTimeout and
      AllowHibernateEncryptedSwap entries
    + Bugfixes:
    - Fix c&p typo in documentation
    - The gettext package should match the tarball name
    - Provide UpDaemon with C setters rather than relying on
      GObject properties
    - Sanity check the device is not already in the list before
    - Fix recognition of lithium iron phosphate (LiFePO4) batteries
  - Changes from version 0.9.2:
    + New Features:
    - Add a missing accessor: up_client_get_lid_is_present()
    - Change the tarball name to be all lower case to match udisks
      and udev
    - Convert the daemon to using objects from libupower-glib, not
    - Do not allow client programs to enumerate the device list
      more than once
    - Get the encrypted swap status from the backend, rather than
      hardcoding Linux specifics
    - Get the kernel sleep capabilities from the backend, rather
      than hardcoding Linux specifics
    - Get the suspend and hibernate commands from the backend,
      rather than hardcoding Linux specifics
    - Get the swap size from the backend, rather than hardcoding
      Linux specifics
    - Show in ./configure summary if unit tests have been enabled
      or not
    + Bugfixes:
    - Do not warn what we are correcting energy-full when there is
      no data to copy
    - Ensure we enumerate devices before we start monitoring them
    - Fixes to the script
    - Make dummy backend usable for architectures without a native
    - Remove libdevkit-power-gobject dependency from backends
    - Simplify udev subdirectory handling
  - Update the spec file for the case change in the tarball name.
* Tue Mar 23 2010
  - First package of upower, the new name of DeviceKit-power. The
    packaging is loosely based on the DeviceKit-power packaging.
  - Note that we provide compatibility package for DeviceKit-power
    for now.



Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Apr 9 10:34:41 2022