Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

ethtool-4.13-lp150.2.2 RPM for ppc64le

From OpenSuSE Ports Leap 15.0 for ppc64le

Name: ethtool Distribution: openSUSE Leap 15.0
Version: 4.13 Vendor: openSUSE
Release: lp150.2.2 Build date: Wed May 9 07:36:45 2018
Group: Productivity/Networking/Diagnostic Build host: obs-power8-05
Size: 504527 Source RPM: ethtool-4.13-lp150.2.2.src.rpm
Packager: https://bugs.opensuse.org
Url: http://kernel.org/pub/software/network/ethtool/
Summary: Examine and Tune Ethernet-Based Network Interfaces
Ethtool is a small utility for examining and tuning ethernet-based
network interfaces.  See the man page for more details.

Provides

Requires

License

GPL-2.0

Changelog

* Thu Apr 05 2018 mkubecek@suse.cz
  - add warning that changes should be submitted via git (i.e. not
    directly to IBS) to the specfile
  - drop BuildRoot (no longer needed in SLE15)
  - drop BuildRequire for xz (no longer needed in SLE15)
* Thu Apr 05 2018 mkubecek@suse.cz
  - use %license rather than %doc for license file (bsc#1082318)
* Thu Apr 05 2018 mkubecek@suse.cz
  - add backported post-4.13 upstream fixes (bsc#1088294):
    ethtool-fix-MFLCN-register-dump-for-82599-and-newer.patch
    ethtool-correct-display-of-VF-when-showing-vf-queue-.patch
    ethtool-show-VF-and-queue-in-the-help-for-N.patch
    ethtool-correct-VF-index-values-for-the-ring_cookie-.patch
* Mon Oct 30 2017 mkubecek@suse.cz
  - Update to new upstream release 4.13
    * Feature: add support for HWTSTAMP_FILTER_NTP_ALL
    * Feature: Add DMA Coalescing support
    * Feature: Remove UDP Fragmentation Offload error prints
    * Feature: stmmac: Add DMA HW Feature Register
    * Fix: Do not return error code if no changes were attempted.
    * Fix: Fix formatting of advertise bitmask
    * Fix: fix the rx vs tx mixup in set channel message
* Tue Jun 06 2017 mkubecek@suse.cz
  - Update to new upstream release 4.11
    * Feature: Support for configurable RSS hash function
    * Feature: support queue and VF fields for rxclass filters
    * Feature: Add support for 2500baseT/5000baseT link modes
    * Fix: Fix SFF 8079 cable technology bit parsing
    * Fix: sync help output for -x/-X with man page
* Thu Mar 30 2017 mkubecek@suse.cz
  - Update to new upstream release 4.10
    * Fix: Fix the "advertise" parameter logic.
    * Feature: Implement ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY downshift
    * Feature: add register dump support for fjes driver (-d option)
  - add keyring with John Linville's key for tarball verification
* Tue Oct 11 2016 mkubecek@suse.cz
  - Update to new upstream release 4.8
    * Feature: QSFP Plus/QSFP28 Diagnostics Information Support
    * Feature: Enhancing link mode bits to support 25G/50G/100G
    * Feature: add support for 1000BaseX and missing 10G link mode
    * Fixes: address Coverity issues 1363118 - 1363125
* Mon Jul 04 2016 mkubecek@suse.cz
  - Update to new upstream release 4.6
    * Feature: Support register dump on Intel X550 NICs (-d option)
    * Fix: Correct some reported register offsets on Intel 10GbE NICs
      (-d option)
    * Feature: Add IPv6 support to NFC (-n, -N, -u and -U options)
    * Feature: Add support for ETHTOOL_xLINKSETTINGS ioctls (no
      option and -s option)
    * Feature: Use netlink socket when AF_INET not available
* Tue Mar 15 2016 mkubecek@suse.cz
  - Update to new upstream release 4.5
    * Fix: Heap corruption when dumping registers from a file
      (-d option)
    * Fix: Stricter input validation for EEPROM setting (-E option)
    * Feature: Add PHY statistics support (--phy-statistics option)
    * Feature: Support setting default Rx flow indirection table
      (-X option)
    * Doc: Properly indent sub-options in man page
    * address build issues (mostly compiler warnings)
* Fri Oct 09 2015 mkubecek@suse.cz
  - Update to new upstream release 4.2
    * Feature: Support soldered-on modules in module EEPROM dump
      (-m option)
    * Feature: Add register dump support for VMware vmxnet3
      (-d option)
    * Feature: Update register dump support for IBM EMAC (-d option)
      (requires Linux 4.3 or a future stable update to 4.1 or 4.2)
    * Doc: Fix typo in man page
* Mon Jun 01 2015 mkubecek@suse.cz
  - Update to new upstream release 4.0
    * Fix: Formatting of RX flow hash indirection table when size not
      divisible by 8 (-x option)
    * Fix: Add missing Advertised speeds (no option and -s option)
    * Feature: Add support to get expansion ROM version (-i option)
    * Feature: Include SFP serial number and date in EEPROM dump
      (-m option)
* Sun Jan 11 2015 jengelh@inai.de
  - Update to new upstream release 3.18
    * Fix: Lookup of SFP Tx bias in SFF-8472 module diagnostics
    (-m option)
  - Drop usrmerge compat symlinks
* Tue Nov 18 2014 jengelh@inai.de
  - Update to new upstream release 3.16
    * Support for configurable RSS hash key (-x/-X options)
    * Add register dump support for Altera Triple Speed Ethernet
    (-d option)
    * Report Backplane as a supported port
  - Remove unused call to %gpg_verify (the macro expands to nothing);
    source validation handled by osc.
* Thu Feb 06 2014 puzel@suse.com
  - Drop ethtool-display-switch-port-attributes.patch (failed
    upstream acceptance and has to be reworked)
* Thu Dec 05 2013 puzel@suse.com
  - Add '-q' command line option to display switch port attributes
    (bnc#853637, fate#315293)
  - added patches:
    * ethtool-display-switch-port-attributes.patch
* Sun Nov 24 2013 p.drouand@gmail.com
  - Update to version 3.12.1
    * Fix: Memory corruption when applying external calibration to
    SFF-8472 module diagnostics (-m option)
    * Feature: Add Intel 82599 and x540 DCB registers to dump
    (-d option)
  - Changes from 3.12
    * Fix: Remove alternate method to check for VLAN tag offload on Linux
    < 2.6.37 (-k/-K options)
    * Fix: Hide state of VLAN tag offload and LRO if the kernel is too old
    for us to reliably detect them (-k option)
    * Feature: Add register dump support for Solarflare SFC9100 family
    (-d option)
  - Changes from 3.11
    * Feature: Update Realtek chip list for register dump to match
    r8169 driver in Linux 3.11 (-d option)
    * Feature: Add ixgbevf support for register dump (-d option)
    * Feature: Filter ixgbe register dump according to the specific chip
    (-d option)
* Thu Jul 04 2013 jengelh@inai.de
  - Update to new upstream release 3.10
    * Displaying of support for 10000BASE-KR link mode was implemented.
    * Support for new versions of ixgbe register dump was added.
    * The private flags print output was beautified.
  - More robust make install call
  - Optional signature verification
* Mon Apr 22 2013 puzel@suse.com
  - Update to new upstream release 3.8
    * Feature: Allow setting destination MAC address in L3/L4 flow
      spec rules (-N/-U option)
    * Fix: Show full 64 bits of user-data (-n/-u option)
    * Fix: Add version check for et131x regs (-d option)
    * Doc: Improve description of -f, -t, -s, -N/-U, -W options in
      man page
    * Fix: Restore 20000baseKR2 cap display (no options)
* Mon Dec 17 2012 puzel@suse.com
  - Update to new upstream release 3.7
    * Fix: Gracefully handle failure of register pretty-printer (-d
      option)
    * Feature: Add support for et131x registers (-d option)
    * Feature: Basic optical diagnostics for SFF-8472 modules (-m
      option)
* Mon Oct 08 2012 puzel@suse.com
  - Update to new upstream release 3.6
    * Feature: Allow setting MDI-X state (-s option)
    * Fix: Preserve pause advertising bits when setting speed and
      duplex with autoneg on (-s option)
    * Fix: Don't call ioctl to set EEE parameters if they are the
      same as the current parameters (--set-eee option)
* Mon Aug 06 2012 puzel@suse.com
  - Update to new upstream release 3.5
    * Display support for 1000BASE-KX and 10GBASE-KX4 link modes
    * Energy-Efficient Ethernet (EEE) configuration
      (--show-eee and --set-eee options)
    * Display support for 40G link modes
    * Fix: Don't trust drivers to null-terminate strings
* Sat Jun 16 2012 jengelh@inai.de
  - Update to new upstream release 3.4.1
    * This release adds reporting of driver features ("-i")
    * reporting of supported pause frame modes and of 20G link modes
    * firmware dumps ("-w" and "-W")
    * external loopback tests ("-t")
    * reporting and configuring the number of channels/queues
    ("-l" and "-L") and time stamping capabilities ("-T")
    * reporting of pause frame autonegotiation results ("-a")
    * support for querying and setting all generic net device features
    ("-k" and "-K") and private flags
    * dumping of plugin module EEPROM ("-m")
* Wed May 16 2012 andreas.stieger@gmx.de
  - Add xz build requirement to fix build for openSUSE 11.4
* Mon Feb 27 2012 puzel@suse.com
  - update to ethtool-3.2
    * Feature: Add support for querying and setting private flags
      (--show-priv-flags, --set-priv-flags options)
    * Feature: Omit zero values in Solarflare register tables (-d
      option)
    * Feature: Allow driver to select RX NFC rule location (-U
      option)
    * Fix: Correct register dump offsets for Intel 82575 chipsets
      (-d option)
* Wed Feb 08 2012 rschweikert@suse.com
  - keep binary in /usr tree (UsrMerge project)
* Tue Dec 13 2011 puzel@suse.com
  - update to ethtool-3.1
    * Fix: Show all non-zero registers for tg3 (-d option)
    * Feature: Add support for external loopback test (-t option)
    * Fix: Show correct flow control registers for Intel 82599 (-d option)
    * Feature: Add support for reporting and configuring numbers of
      channels/queues (-l and -L options)
    * Feature: Report pause frame autonegotiation result (-a option)
    * Doc: Change device name metavariable from 'ethX' to 'devname'
    * Doc: Fix various layout problems
    * Cleanup: Reorganise and add test cases for argument parsing
    * Fix: Strictly check for extraneous or missing arguments; in
      particular, fail if the device name is missing
* Wed Dec 07 2011 cfarrell@suse.com
  - license update: GPL-2.0
    sfc.c and stmmac.c have GPL-2.0 licenses
* Fri Dec 02 2011 coolo@suse.com
  - add automake as buildrequire to avoid implicit dependency
* Sun Sep 18 2011 jengelh@medozas.de
  - Remove redundant/obsolete tags/sections from specfile
    (cf. packaging guidelines)
* Mon Aug 08 2011 puzel@novell.com
  - update to ethtool-3.0
    * Feature: Report supported pause frame modes
    * Feature: Support firmware dump (-w and -W options)
    * Feature: Report advertised and supported 20G link modes
    * Feature: Add an 'l4data' option for ip4 filters (-U option)
    * Fix: Correct swapped h_source and h_dest fields for ether
      filters (-U option)
    * Fix: Set ip_ver field correctly for ip4 filters (-U option)
    * Fix: Correct parameter validation for -e and -E options; in
      particular, treat the 'magic' value as unsigned
    * Feature: Report some driver features (-i option)
    * Doc: Remove misleading 'Auto' advertising mask from manual page
    * Doc: Improve table formatting on manual page, using tbl
    * Doc: Remove initial blank page in printed manual page
    * Doc: Fix line-wrapping of options
    * Feature: Add support for ESP as a separate protocol from AH
      (-n, -N, -u and -U options)
    * Cleanup: Remove support for showing RX n-tuple settings
      (-u option), which was never implemented correctly in the kernel
    * Feature: Add support for RX network flow classifier (NFC)
      (-u and -U options)
    * Feature: Add support for e1000 M88 PHY registers (-d option)
    * Cleanup: Change bug-address to netdev
  - use spec-cleaner
* Tue Mar 15 2011 bphilips@novell.com
  - Update to ethtool-2.6.38
    * Doc: Fix spelling and spacing in online help
    * Doc: Update date, version and web site reference in manual page
    * Doc: Fix spelling, capitalisation, consistency and style in
      manual page
    * Doc: Generalise some references to network devices rather than
      Ethernet devices
    * Fix: Don't silently ignore speed/duplex when autoneg is on
    * Fix: Report an error (rather than full usage information) if
      given an unrecognised option
    * Feature: Add --version option
* Thu Nov 18 2010 puzel@novell.com
  - update to ethtool-2.6.36
    * Fix: RX n-tuple masks and documentation
    * Feature: Ethernet-level RX n-tuple filtering and 'clear' action
    * Feature: stmmac register dump support
    * Feature: get permanent address (-P) option
    * Feature: VLAN acceleration control
    * Feature: sfc register dump support
    * Feature: improve cmd line parsing of ints, IPv4 addresses
    * Feature: support ethtool named flags, messaging types
    * Feature: minor man page fixes
    * Feature: control RX flow hash indirection
* Tue Jul 27 2010 puzel@novell.com
  - update to ethtool-2.6.34
    * Feature: Support n-tuple filter programming
    * Feature: Support rx hashing, v2 (targetted for 2.6.35)
    * Feature: Add names of newer Marvell chips
    * new release numbering scheme, based
      on the latest upstream kernel interface supported.
    * Fix: several man page corrections
    * Feature: rx flow hash configuration
    * Feature: report 10000baseT support, where available
    * Feature: report MDI-X status, pause auto-neg, link partner
      adverts
    * Feature: support additional port types
    * Feature: support arbitrary speeds, faster than 65535 Mb
    * Feature: large and generic receive offload (LRO, GRO) support
    * Feature: option to flash firmware image from specified file
    * Feature: support for block writing of EEPROMs
    * Feature: marvell register dump update
    * Feature: at76c50x-usb, e1000e, igb, ixgbe, r8169 register
      dump support
    * Cleanup: remove support for RX hashing by port
    * Doc: Explicitly ship GPLv2 license
  - drop all patches (fixed upstream)
* Mon Jul 12 2010 puzel@novell.com
  - add get-set-gro-settings.patch (bnc#616263)
* Fri Jan 08 2010 jengelh@medozas.de
  - enable parallel build
* Tue Dec 01 2009 mseben@novell.com
  - add speed-parse.patch : fix parse of 10Gbe option (bnc#557016)
  - add cmd-speed-display-all.patch Display all NIC speeds [FATE#305494]

Files

/usr/sbin/ethtool
/usr/share/doc/packages/ethtool
/usr/share/doc/packages/ethtool/AUTHORS
/usr/share/doc/packages/ethtool/NEWS
/usr/share/licenses/ethtool
/usr/share/licenses/ethtool/COPYING
/usr/share/man/man8/ethtool.8.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Nov 9 10:26:55 2021