| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libipmiconsole2 | Distribution: SUSE Linux Framework One |
| Version: 1.6.11 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.3 | Build date: Fri Jun 14 23:56:04 2024 |
| Group: System/Libraries | Build host: h01-ch4d |
| Size: 206927 | Source RPM: freeipmi-1.6.11-slfo.1.1.3.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: http://www.gnu.org/software/freeipmi/ | |
| Summary: FreeIPMI library | |
This project provides "Remote-Console" (out-of-band) and "System Management Software" (in-band) based on Intelligent Platform Management Interface specification. This package contains the libipmiconsole library.
GPL-3.0-or-later
* Mon Jun 12 2023 kkaempf@suse.com
- freeipmi 1.6.11
* Fix double free corner case in ipmiseld.
* Support ISO 8601 date inputs to date range options in ipmi-sel.
* Support Xilinx OEM FRU records.
* Fix corner case in libipmimonitoring, support sensor if units
is "RPM per minute", but just return "RPM" as the units.
* Fix portability compilation on cygwin.
* Fix typo in fiid template field that could lead to packet
interpretation errors.
* Fri Feb 17 2023 andreas.stieger@gmx.de
- freeipmi 1.6.10
* Support IPv6 Lan configuration in ipmi-config
IPv6 configuration is supported in the new Lan6_Conf section
- add upstream signing key and source signature
* Mon Jan 16 2023 schwab@suse.de
- Remove obsolete ExclusiveArch
* Thu Jan 20 2022 kkaempf@suse.com
- freeipmi 1.6.9
* Support --with-systemconfigdir build option.
* Fix build issue on musl where putmsg/getmsg are not available.
* Fix build issue when inb/outb are not available on some systems.
* Fix static build issues with gcrypt.
* Add conserver documentation in faq.
* Minor documentation updates.
* Thu Jul 08 2021 trenn@suse.de
- Fix: W: name-repeated-in-summary C FreeIPMI
- Fix: freeipmi-bmc-watchdog.x86_64:
W: non-etc-or-var-file-marked-as-conffile /usr/share/fillup-templates/sysconfig.bmc-watchdog
Declaring fillup files as conffile is not needed
- freeipmi 1.6.8
* Fix incorrect sensor read corner case on BMCs that use non-default LUNs (LP#1926299).
* Remove hard coded paths from system config files (i.e. mostly files
in /etc). Have paths updated based on options to configure.
* Sun Feb 14 2021 andreas.stieger@gmx.de
- freeipmi 1.6.7:
* Do not require IPMI access when running ipmi-fru with the
- -fru-file option
* Minor documentation updates
- the following fixes were upstreamed:
* Fix default permissions of various config and system files,
drop 1103311-service-files-mode.patch
* Sun Sep 06 2020 kkaempf@suse.com
- Update to 1.6.6
o In libfreeipmi, fix segfault in SPMI parsing leading to immediate
failures on some hardware across all tools.
* Fri May 22 2020 kkaempf@suse.com
- Update to 1.6.5
o Add FRU parsing workaround for Fujitsu Primergy RX1330, in which a
CEh is used to indicate that no FRU data is available.
o Misc minor fixes.
* Thu Aug 22 2019 kkaempf@suse.com
- Update to 1.6.4
o In libfreeipmi, add additional workarounds for packets that are
re-ordered during sensor bridging.
o In libfreeipmi, add additional sensor / event interpretations.
o In libfreeipmi, fix error return value on bridging requests.
o Add workaround in ipmi-sel for QuantaPlex T42D-2U motherboard,
whichlists a SDR record that makes no sense.
o Add workaround for Dell Poweredge FC830, which have an error
when reading the last SDR record on a motherboard.
o Support Supermicro X10 OEM dimm events.
* Fri Jan 25 2019 kkaempf@suse.com
- Update to 1.6.3
o In ipmi-locate, support parsing SPMI tables exported via sysfs.
o Support Intel S2600GZ OEM sensor and SEL events.
o Support Intel S2600WP OEM sensor and SEL events.
o Support Gigabyte MG20-OP0-ZB OEM SEL events.
o Fix DISCRETE_READING workaround in libipmimonitoring.
o In libfreeipmi, add workaround for packets that are re-ordered
during sensor bridging.
o Minor bug fixes.
o Various documentation updates/fixes.
* Fri Jan 11 2019 trenn@suse.de
- Add provides:freeipmi:/usr/sbin/ipmiseld to the
freeipmi-ipmiseld split package for backward compatibility
for now
* Fri Nov 09 2018 trenn@suse.de
- Remove has_systemd conditions
- Add rcservice shortcut links to control services
- Fix some more build warnings
- Use %license instead of %doc where appropriate
- Extract ipmiseld service as a separate package as done with other
services
- Declare /var/lib/freeipmi/ipckey as %ghost and do not create it
explicitly in .spec file (bsc#1100124)
* Tue Aug 28 2018 trenn@suse.de
- Enable build for aarch64 (fate#326605)
* Wed Aug 01 2018 josef.moellers@suse.com
- Changed mode of .service files from 755 to 644.
[bsc#1103311, 1103311-service-files-mode.patch]
* Fri May 04 2018 kkaempf@suse.com
- Update to 1.6.2
o Fix error in bridging where bridged requests were sent to the
wrong LUN.
o Fix command parsing bugs in legacy ipmi-config scripts
(i.e. bmc-config, ipmi-pef-config, etc.)
o Do not output full path of daemons in syslog, output only the
daemon name (i.e. output "ipmidetected" instead of
"/usr/sbin/ipmidetectd").
o Update channel range from 0-7 to 0-11, per errata IPMI update.
* Sat Feb 03 2018 kkaempf@suse.com
- Update to 1.6.1
o Add IPv6 hostname support to FreeIPMI, all of FreeIPMI can now take
IPv6 addresses as inputs to "host" parameters, options, or inputs.
o Support significant portions of IPMI IPv6 configuration in
libfreeipmi.
o Add --no-session option in ipmi-raw.
o Add SDR cache options to ipmi-config.
o Legacy -f short option for --flush-cache and -Q short option for
quiet-cache. Backwards compatible for tools that supported it
before.
o In ipmi-oem, support Gigabyte get-bmc-services and
set-bmc-services.
o Various performance improvements:
- Remove excessive calls to secure_memset to clear memory.
- Remove excessive memsets and clears of data.
- Remove unnecessary "double input checks".
- Remove expensive input checks in libfreeipmi fiid library.
Fallout from this may include FIID_ERR_FIELD_NOT_FOUND
errors in different fiid functions.
- Remove unnecessary input checks in libfreeipmi fiid library.
- Add recent 'lookups' of fields in fiid library to internal
cache.
o Various minor fixes/improvements
- Update libfreeipmi core API to use poll() instead of select(), to
avoid issues with applications with a high number of threads.
- As a side point, while IPv6 networking support has been added, IPv6
configuration in ipmi-config & bmc-config is not supported in this
release.
* Thu Nov 23 2017 rbrown@suse.com
- Replace references to /var/adm/fillup-templates with new
%_fillupdir macro (boo#1069468)
* Wed Oct 18 2017 alarrosa@suse.com
- Follow the shared library packaging policy. Created new packages
libipmiconsole2, libipmidetect0, libipmimonitoring6, libfreeipmi17
* Wed Aug 30 2017 kkaempf@suse.com
- Update to 1.5.7
o In libipmimonitoring, fix several mem-leak corner cases.
* Thu Jul 06 2017 kkaempf@suse.com
- Update to 1.5.6
o In libfreeipmi locate (used by ipmi-locate), use DMI firmware in
sysfs if it exists.
o Minor mem-leak corner case fix in libfreeipmi.
o Minor documentation fixes.
o Minor error message clarifications.
* Thu Mar 09 2017 sfalken@opensuse.org
- Edited %files to clear unpackaged files builderror in
openSUSE:Factory
* Thu Nov 03 2016 kkaempf@suse.com
- Update to 1.5.5
o Fix invalid flag clear in libipmiconsole that can lead to a potential
double close on a file descriptor.
o Support Supermicro H8SGL-F OEM sensors and events.
* Tue Oct 04 2016 kkaempf@suse.com
- Update to 1.5.4
o Various changes/fixes in libipmiconsole
- If user retrieves file descriptor from ipmiconsole_ctx_fd,
user is required to close it. ipmiconsole_ctx_destroy no
longer closes it. This is to avoid a potential double close
which can be a problem for multithreaded applications. This
is a change in behavior, but we do not believe this will
affect most applications since most users close the file
descriptor under most scenarios anyways.
- ipmiconsole_ctx_destroy() should now be called to free
resources even if ipmiconsole_engine_teardown() has been
called. This has been done to create consistent behavior in
the API and avoid a former segfault possibility. This is a
change in behavior, but we do not believe this will affect
most applications since ipmiconsole_engine_teardown() is
only called when an application is being shutdown.
- The use of IPMICONSOLE_ENGINE_CLOSE_FD has been clarified in
the header file. Some of the prior text was unclear.
Behavior has not been changed.
o In ipmi-oem, support Intel get-bmc-services and set-bmc-
services commands.
o In ipmi-oem, support Gigabyte get-nic-mode and set-nic-mode
commands.
o Support Gigabyte MD90-FS0-ZB OEM SEL events.
* Tue Aug 02 2016 kkaempf@suse.com
- Update to 1.5.3
o Update Fujitsu OEM extension product id support range.
o In ipmiconsole, support --debugfile option for more difficult
debugging scenarios.
o In all sensor related tools, increase max number of record ids and
sensor types that can be handled.
o Fix several invalid completion code errors/values.
* Mon May 30 2016 kkaempf@suse.com
- Update to 1.5.2
o Update configuration file parsing code to handle values up to
1024 characters in length.
o Set FD_CLOEXEC for ipmi driver device files opened within
libfreeipmi.
o Support --read-fru, --write-fru, and --device-id option in
bmc-device.
o Support --fru-file option in ipmi-fru.
o Various library updates in libfreeipmi to handle new features.
* Wed Dec 02 2015 kkaempf@suse.com
- Update to 1.5.1
o Update Intel Node Manager support for 3.0 specification.
- Update API and fiid templates in libfreeipmi.
- Support new OEM SEL events
- Update ipmi-oem commands.
- Support new get/set-turbo-synchronization-ratio
- Support new 'policypowerdomain' option in
get-node-manager-capabilities and set-node-manager-policy.
- Update output of get-node-manager-policy and
get-node-manager-capabilities for changes.
- get/set-node-manager-alert-thresholds converted to
get/set-node-manager-policy-alert-thresholds. Legacy
commands still supported.
o Update libfreeipmi for IPMI 2.0 Errata 7.
- Support/handle FRU Multirecord NVM Express type.
o Support Get Device SDR Info, Get Device SDR, and Reserve
Device SDR Repository commands in libfreeipmi.
o Support ipmi-sel OEM interpretation of Linux kernel panics.
o Re-organize OEM header files into per-vendor files.
o In ipmi-oem, fix error in "DNS Register BMC" output in
"get-dns-config" output in Inventec, Quanta, and Wistron vendor
sections.
o Support systemd through --with-systemdsystemunitdir configure
option.
o Minor corner case bug fixes.
* Fri Oct 30 2015 kkaempf@suse.com
- Update to 1.4.11
o Fix logic error with a few OEM SEL events for Intel E5 2600 V3
motherboard.
o Fix various logic errors in ipmi-oem Intel Node Manager extensions.
o Documentation updates.
* Wed Oct 21 2015 kkaempf@suse.com
- Fix SLE10 and RHEL5 builds
* Wed Oct 21 2015 kkaempf@suse.com
- Update to 1.4.10
o In ipmi-oem, support Supermicro get-power-supply-status2.
o In ipmi-locate, fix probing issue on arm32 & 64.
o Handle several additional completion code error message in
libfreeipmi.
o Handle several error handling corner cases in ipmi-sensors.
o Support Intel E5 2600 V3 motherboard OEM SEL events.
o Fix several errors in ipmi-oem intelnm get-node-manager-statistics
output.
o Fix logic errors in ipmi-oem intelnm set-node-manager-policy.
* Thu Jun 18 2015 kkaempf@suse.com
- fix Fedora/RHEL builds
* Tue Jun 02 2015 kkaempf@suse.com
- Update to 1.4.9
o Fix strtol parse corner cases in several commands.
o Minor documentation fixes.
* Thu Apr 02 2015 mpluskal@suse.com
- Add gpg signature
* Thu Jan 08 2015 kkaempf@suse.com
- Update to 1.4.8
o Fix segfault in crypt code with libgcrypt versions >= 1.6.0.
o Fix --fanout command line parse bug.
* Thu Dec 11 2014 kkaempf@suse.com
- Update to 1.4.7
o Fix typo from FRU spec, language "Tegulu" is actually "Telugu".
o Fix typo in SEL session output, "Invalid Username of Password" to
"Invalid Username or Password".
o Loop on select() call if interrupted by EINTR in openipmi, ssif,
and sunbmc inband drivers.
o Fix integer overflow bug in ipmi-config when configure
vlan ID > 255.
o Add workaround for ipmi-config issue on Supermicro X10DDW-i.
o Fix error handling bug in bmc-info.
* Wed Oct 29 2014 kkaempf@suse.com
- Update to 1.4.6
o In ipmi-fru, support output of DDR4 SDRAM modules.
o Fix EFI probing on non IA64 systems.
o Fix corner case in ipmi-raw w/ standard input or --file and
empty lines.
o Fix parsing corner case in ipmi-chassis.
o Support SSIF bridging.
* Fri Aug 29 2014 juwolf@suse.com
- Remove executable flags from systemd service files to prevent
systemd warning (bnc#893142)
* Tue Jul 29 2014 kkaempf@suse.com
- Update to 1.4.5
o Fix libipmiconsole calculation bug w/ SOL character send size.
o Support Supermicro H8DGU and H8DG6 OEM sensors and events.
o Minor documentation updates.
* Mon Jun 30 2014 kkaempf@localhost
- Update to 1.4.4
o Support retrys of SSIF reads to handle SSIF NACKs.
* Thu May 08 2014 kkaempf@suse.com
- Update to 1.4.3
has freeipmi-1.4.2.patch included, drop local patch
* Wed May 07 2014 kkaempf@suse.com
- Update to 1.4.2
o In ipmi-oem, support Supermicro get-power-supply-status and
get-pmbus-power-supply-status commands.
o Support 'ipmiping' workaround in ipmipower.
o Minor documentation updates.
- Fix compile bug, add freeipmi-1.4.2.patch
* Tue Mar 04 2014 kkaempf@suse.com
- Update to 1.4.1
Tools - New Features
- -------------------
o Support 'serialalertsdeferred' workaround in ipmiconsole.
o Support 'solpacketseq' workaround in ipmiconsole.
o Fix portability issues for Apple / OS X.
* Thu Feb 06 2014 kkaempf@suse.com
- Drop freeipmi-max-sensor.patch, included upstream
- Update to 1.4.0 beta0
Tools - New Features
- -------------------
o Support new tool ipmi-config. Ipmi-config is a consolidated
configuration tool implementing everything that was previously in
bmc-config, ipmi-pef-config, ipmi-sensors-config, and
ipmi-chassis-config.
- The consolidated tool will allow users to checkout, commit, and
diff sections/fields across the four former tools using only one
tool.
- The consolidated tool will also allow users to checkout, commit,
and diff new sections/fields not yet covered in the four former
tools.
- Legacy scripts for bmc-config, ipmi-pef-config,
ipmi-sensors-config, and ipmi-chassis-config will point to the new
tool with all appropriate options to ensure full backwards
compatability.
- The ipmi-pef-config --info option has been made legacy. It is
still supported but no longer advertised.
o Support Intel Data Center Host Interface / Management Engine as
optional driver type for in-band communication.
- Typically these are loaded as /dev/dcmi and /dev/mei drivers.
- This driver is identified as the "inteldcmi" type, as it is
specific to Intel systems.
o Support OEM extensions for Intel Windmill, Wiwynn Windmill, and
Quanta Winterfell motherboards in ipmi-sel and ipmi-sensors. These
motherboards are also know as motherboards for the Open Compute
Project (OCP).
o Support DCMI configuration in ipmi-config.
o Update FreeIPMI for changes in IPMI 2.0 Errata 5. Include are:
- New sensor events for Power Supply and OS Boot sensors. New
events are supported in all areas, ipmi-sensors, ipmi-sel,
libipmimonitoring, etc.
- PEF now supports 255 filter numbers, not 127. This is supported
in ipmi-config (formerly ipmi-pef-config).
- Support get/set of new System Info Parameters Present OS Version,
BMC URL, and Base OS/Hypervisor URL. This is supported in
bmc-info and bmc-device.
o Update ipmi-oem Intel Node Manager OEM commands for changes listed
in Intelligent Power Node Manager 2.0 specification.
- Due to changes in the specification, minor text changes may exist
in some output from intelnm OEM commands.
o Update ipmi-sel to support new SEL events in Intelligent Power Node
Manager 2.0 specification.
Tools - Bug Fixes/Minor Changes
- ------------------------------
o Fix bmc-info output of GUID, format was output with two bytes out of
order.
- May affect scripts parsing and using the GUID.
o Bmc-info now supports --get-system-guid and outputs the System GUID
as well as the Device GUID by default.
- The Device GUID is not prefixed with the text "Device GUID"
instead of just "GUID". Any scripts scripting against this will
need to be adjusted.
o Bmc-info now supports a workaround of 'guidformat' to read the GUID
with a format a number of vendors have incorrectly used.
o In ipmi-config's sensor configuration, decimal values that cannot be
encoded accurately now report a clearer error message.
Libraries
- --------
o Update libfreeipmi and libipmimonitoring to support IPMI 2.0 Errata 5.
Included are:
- Support new sensor events for Power Supply and OS Boot sensors.
- Support PEF filter numbers up to 255.
- Support new System Info Parameters for Present OS Version, BMC
URL, and Base OS/Hypervisor URL.
o Update libfreeipmi to support Intel Node Manager payloads per Intel
Intelligent Power Node Manager 2.0 specification.
- Due to changes in the specification, some payload fields have been
changed.
o Update libfreeipmi SEL sub-library to handle new event messages in
Intelligent Power Node Manager 2.0 specification.
* Wed Jan 15 2014 kkaempf@suse.com
- Updated 1.3.4 release from upstream to support ppc64le.
* Thu Dec 19 2013 kkaempf@suse.com
- Prevent crash on systems with more than 601 sensors.
Add freeipmi-max-sensor.patch
* Fri Dec 13 2013 kkaempf@suse.com
- FreeIPMI 1.3.4 - 12/12/13
- ------------------------
o Support 'solchannelsupport' workraound in ipmiconsole /
IPMICONSOLE_WORKAROUND_SKIP_CHANNEL_PAYLOAD_SUPPORT workaround
flag in libipmiconsole.
o Fix SDR cache workaround for motherboards with invalid SDR record
counts listed.
o Workaround Supermicro bug in bmc-watchdog.
o Fix error checks in sensor decoding functions, leading to
possible problems in ipmi-sensors-config.
o Update documentation with additional workarounds for motherboards.
o Fix various minor bugs.
* Wed Oct 30 2013 kkaempf@suse.com
- FreeIPMI 1.3.3
- ------------------------
o Add support for intelnm get-node-manager-alert-destination and
set-node-manager-alert-destination in ipmi-oem.
o Under very verbose mode, ipmi-sel will now record types for OEM
records. This should allow OEM parses outside of FreeIPMI to more
effectively parse OEM specific SEL records.
o Fix big endian portability bugs.
* Sun Oct 27 2013 p.drouand@gmail.com
- Add systemd support for openSUSE >= 12.3
* Fri Oct 04 2013 kkaempf@suse.com
- FreeIPMI 1.3.2 - 09/10/13
- ------------------------
o Update FreeIPMI tools to check libfreeipmi API error codes
correctly.
o Update ipmi-api.h to list mappings of IPMI completion codes and
RMCPPlus codes to API Error codes.
* Mon Aug 26 2013 kkaempf@suse.com
- FreeIPMI 1.3.1 - 08/22/13
Tools - New Features
- -------------------
o In all tools reporting time (ipmi-sel, ipmi-fru, ipmi-oem,
bmc-device, ipmi-sensors, ipmi-dcmi), timestamps are now reporting
under the assumption the timestamp is already in localtime (compared
to being in UTC time and converted to localtime). This is by
definition in the IPMI specification.
o In all tools reporting time (ipmi-sel, ipmi-fru, ipmi-oem,
bmc-device, ipmi-sensors, ipmi-dcmi), support --utc-to-localtime,
- -localtime-to-utc, and --utc-offset options to allow users to
adjust timestamps as needed for certain environments.
o In ipmi-fru, support output of DDR3 SDRAM modules.
o In ipmi-fru, support output of new FRU multirecords, most notably
extended DC output and extended DC load (per FRU Revision 1.2
update).
o In bmc-device, support --get-sel-time-utc-offset and
- -set-sel-time-utc-offset.
Tools - Bug Fixes/Minor Changes
- ------------------------------
o In ipmi-fru, report power supply low/high end voltage ranges as
signed numbers (per FRU Revision 1.2 update).
o In ipmi-fru, output "unspecified" for manufacturing date/time or
peak capacity as appropriate (per FRU Revision 1.2 update).
o In ipmi-fru, bridge additional FRU entries as appropriate.
o In all tools reporting time (ipmi-sel, ipmi-fru, ipmi-oem,
bmc-device, ipmi-sensors, ipmi-dcmi), special timestamps such as
Post-Init and Unspecified will now be output.
o Fix output corner case with entity sensor names in various tools.
Libraries
- --------
o In libfreeipmi, support additional chassis types (per FRU Revision
1.2 update).
o In libfreeipmi, support new FRU multirecord types (per FRU Revision
1.2 update).
o In libfreeipmi, support new IPMI_FRU_FLAGS_READ_RAW 'fru'
sub-library flag to read data from the FRU raw without parsing
headers/records.
o In libfreeipmi, add support for DDR3 SDRAM FRU entries and JEDEC
manufacturer IDs.
o In libfreeipmi, add support for Get SEL Time UTC Offset and Set SEL
Time UTC Offset payloads.
o In libfreeipmi 'sel' sub-library, support
IPMI_SEL_PARAMETER_UTC_OFFSET,
IPMI_SEL_STRING_FLAGS_UTC_TO_LOCALTIME, and
IPMI_SEL_STRING_FLAGS_LOCALTIME_TO_UTC options/flags.
o In libfreeipmi, do not pad legacy byte on IPMI 1.5 packets. Legacy
byte should be padded on ethernet frame, not IP packet.
o In libfreeipmi, 'sdr' sub-library, when creating SDR cache, add
checksums to cache to ensure data in cache is not corrupted. Older
caches without checksums still backwards compatible supported.
o In libfreeipmi, support new IPMI_ERR_COMMAND_INVALID_OR_UNSUPPORTED
error code for IPMI commands that are invalid or unsupported.
* Tue Jul 23 2013 kkaempf@suse.com
- FreeIPMI 1.2.9 - 07/17/13
- ------------------------
o Fix threshold output corner case in ipmi-sensors.
o Fix invalid declaration in libipmimonitoring header.
o Fix older compiler build problems.
* Mon Jun 24 2013 kkaempf@suse.com
- FreeIPMI 1.2.8 - 06/21/13
- ------------------------
o Fix portability build bug on ARM systems.
o Add 'internal IPMI error' troubleshooting to manpages.
o Fix bmc-info corner case on Bull 510 systems.
- drop automake-1_13.patch patch, included upstream
* Tue Apr 30 2013 kkaempf@suse.com
- FreeIPMI 1.2.6 - 04/29/13
- ------------------------
o Support HP Proliant DL160 G8 OEM sensors.
o Support Supermicro X9SCM-iiF OEM sensors and events.
o Support output of temperature sampling period to ipmi-dcmi.
o Clarify error message when SOL session cannot be stolen in
ipmiconsole/libipmiconsole.
o Fix dcmi rolling average time period output error
o Fix ipmi-dcmi output errors with --get-dcmi-sensor-info.
o Fix corner case in calculation of confidentiality pad length with
AES-CBC-128 encryption. Incorrect pad effects some vendor firmware
implementations.
o Send IPMI 2.0 packets differently than IPMI 1.5 packets, as the
former does not require legacy pad data to be appended to
payloads.
o Fix Intel OEM SEL buffer overflow.
o Fix out of trunk source build.
Libraries
- --------
o Support new ipmi_rmcpplus_sendto() and ipmi_rmcpplus_recvfrom()
functions.
o Support new HP Proliant DL160 G8 OEM sensor events.
* Thu Feb 28 2013 kkaempf@suse.com
- fix for automake 1.13
* Thu Feb 28 2013 kkaempf@suse.com
- FreeIPMI 1.2.5 - 02/26/13
- ------------------------
o In all config tools (bmc-config, ipmi-pef-config,
ipmi-chassis-config, ipmi-sensors-config), fix bug when user
specifies --checkout and --filename option and no data outputs to
file.
o In all config tools, exit with value 1 when non-fatal errors
occur.
Exit with value 2 when fatal errors occur.
o Support Supermicro X9SPU-F-O OEM sensors and events.
o Support Supermicro X9DRI-LN4F+ OEM intepretations (previously
forgotten).
o Clarify use of --filename in config tool manpages.
- FreeIPMI 1.2.4 - 01/10/12
- ------------------------
o Support Supermicro X9DRI-LN4F+ OEM sensors and events.
o Fix output corner case for "session-based" channels.
o Fix ipmi-oem set-power-restore-delay corner case in time settings.
o Fix ipmiseld memleak.
o Fix libfreeipmi potential fd leak when generating random numbers.
o Fix libfreeipmi error output bug in RMCP interface.
o Fix several minor corner cases discovered by static code analysis.
* Thu Nov 15 2012 kkaempf@suse.com
- FreeIPMI 1.2.3 - 11/14/12
- ------------------------
Tools
- -----
o In ipmi-oem, support new Dell Poweredge R720 OEM commands extensions,
including:
- get-nic-selection-failover
- set-nic-selection-failover
- power-monitoring-over-interval
- power-monitoring-interval-range
- get-last-post-code
o In ipmi-oem, update active-lom-status for Dell Poweredge R720.
o In ipmi-oem, support new Dell Poweredge R720 get-system-info option
'cmc-info'.
o In ipmi-oem, Dell get-system-info "slot-number" key changed to
"blade-slot-info". Legacy option still supported.
o In ipmi-sel, support Dell Poweredge R720 OEM SEL extensions.
o In all tools, support nochecksumcheck workaround option.
o In all daemons (ipmiseld, ipmidetectd, bmc-watchdog), check for
syscall errors during daemon setup.
Libraries
- --------
o In libfreeipmi, support Dell R720 OEM extension intepretations.
o In libfreeipmi, libipmimonitoring, and libipmiconsole, support
NO_CHECKSUM_CHECK workaround flag.
o In libipmiconsole, IPMICONSOLE_DEBUG_FILE logs debug to files in
current working directory and not /var/log. PID is also appended
to debug files.
Misc
- ---
o Various documentation updates and fixes.
* Thu Oct 04 2012 kkaempf@suse.com
- FreeIPMI 1.2.2 - 10/02/12
Tools
- -----
o Support new --sol-payload-instance and --deactivate-all-instances
options in ipmiconsole.
o Fix ipmiseld compile issue with -Werror=format-security.
Libraries
- --------
o In libipmiconsole, add new ipmiconsole_ctx_set_config() and
ipmiconsole_ctx_get_config() functions.
o In libipmiconsole, add support for specifying and handling
different SOL payload instances. This support includes:
- Support new IPMICONSOLE_CTX_CONFIG_OPTION_SOL_PAYLOAD_INSTANCE
configuration option.
- In libipmiconsole, support new
IPMICONSOLE_BEHAVIOR_DEACTIVATE_ALL_INSTANCES behavior flag.
- Return more appropriate error codes when activation limits are
discovered.
o In libfreeipmi, fix debug output corner case when outputting byte
arrays.
Misc
- ---
o Various documentation updates and fixes.
* Mon Jul 30 2012 kkaempf@suse.com
- FreeIPMI 1.1.7 - 07/30/12
o In ipmi-sensors and ipmi-sel, fix units output corner case.
o In bmc-info, detect unsupported system info corner case.
o Update documentation with motherboard support.
Special Note: This will likely be the last release of FreeIPMI
in the 1.1.X stable branch.
* Wed Jul 04 2012 kkaempf@suse.com
- Fix build: %make_install -> %makeinstall
* Fri Jun 29 2012 kkaempf@suse.com
- FreeIPMI 1.1.6 - 06/28/12
- Tools
- -----
o In ipmi-sel, support Supermicro SEL OEM interpretations in
- -output-event-state.
o In ipmi-sel and ipmi-sensors, support additional sensor/SEL
interpretations including:
- Version Change
- System Firmware Progress Transition Severity
- Button/Switch Transition Severity
- Chassis Transition Severity
- POST Memory Resize State
- Cable/Interconnect Transition Severity
- Boot Error Transition Severity
- Slot Connector Transition Severity
- Memory State
- Memory Transition Severity
o In bmc-config, ipmi-chassis-config, ipmi-pef-config, and
ipmi-chassis-config, support cipher suite ID argument.
o Support Supermicro X9DRi-F OEM sensors and events.
o Fix Intel S2600JF/Appro 512x OEM SEL interpretations based on
comments from Intel.
Libraries
- --------
o Support Supermicro SEL OEM interpretations.
o Support new sensor/SEL interpretations.
Misc
- ---
o Various documentation updates and fixes.
* Thu May 17 2012 kkaempf@suse.com
- FreeIPMI 1.1.5 - 05/17/12
Tools
- -----
o Support Supermicro OEM sensors/SEL on H8DGU-F motherboards.
o In ipmiconsole, fix password length check bug.
o In bmc-watchdog, fix --start-if-stopped and --reset-if-running
options.
o In ipmidetectd, fix usage output typos.
o In ipmi-sensors-config, fix several parallel output corner cases.
o For consistency to other tools, turn on quiet-caching if
communicating with multiple hosts in bmc-device and ipmi-oem.
o In ipmi-sensors, fix bug in which multiple workarounds could not
be used or used in combination with bridging.
o Fix start run levels in ipmidetectd init script.
Libraries
- --------
o In libfreeipmi fru-parse API, handle additional device busy errors.
Misc
- ---
o Various documentation updates.
* Tue May 08 2012 trenn@suse.de
- Fix build: Added version 1.1.4 tarball
- Adjust specfile according to spec-cleaner as suggested by Sascha Peilicke
to get this package into factory.
* Fri Apr 20 2012 kkaempf@suse.com
- FreeIPMI 1.1.4 - 04/19/12
Tools
- -----
o In ipmi-oem, fix error message output in several Supermicro OEM
commands.
o In ipmi-oem, add Intel --get-power-restore-delay and
- -set-power-restore-delay support.
o In ipmi-sel, support Intel S2600JF/Appro 512x OEM SEL
interpretations.
Libraries
- ---------
o In libfreeipmi, support new sensor and SEL event
interpretations, including Session Audit, Voltage Limits.
o In libfreeipmi, support new OEM interpretations for Intel S5000PAL
NMI State and SMI timeout sensors/SEL events.
o In libfreeipmi, support Intel S2600JF/Appro 512x OEM SEL
interpretations.
Misc
- ---
o Various documentation updates.
* Fri Mar 23 2012 trenn@suse.de
- Adjust source url, downloadable tarballs moved from zresearch
to ftp.gnu.org
- Update to 1.1.3
* Mon Mar 19 2012 trenn@suse.de
- Adjust .spec file via format_spec_file
* Tue Mar 06 2012 trenn@suse.de
- Update to 1.1.2
- Adjusted license to GPL-3.0
- Silent some build checks:
- license string
- too short description
- remove INSTALL file from %docdir
* Wed Sep 21 2011 kkaempf@suse.com
- Update to 1.0.6
o Support 'ignorescanningdisabled' workaround in ipmi-sensors.
o Support Supermicro X8SIL-F, X9SCL, and X9SCM motherboard OEM sensors.
o Update bmc-watchdog logrotate script to reduce unnecessary output.
o Fix ipmi-fru output typo.
- Update to 1.0.5
o Fix various issues in ipmi-dcmi, including command line parsing
bugs, asset tag/string identifier overwriting, and fix assumptions
based on new information in v1.5 errata.
o Support pkg-config files for libraries.
o Various documentation updates.
* Sat Apr 23 2011 kkaempf@novell.com
- Update to 1.0.4
o Support "discretereading" workaround in ipmi-sensors and
associated libraries.
o Support "spinpoll" workaround/performance optimization in tools
and libraries.
o Support additional sensor/SEL interpretations for Intel
motherboards.
o Add convenience input checking functions to libipmiconsole.
o Fix bug in libipmimonitoring to allow additional OEM
interpretations.
* Wed Mar 30 2011 kkaempf@novell.com
- update to 1.0.3
o Support additional error handling in bmc-info.
o Support ability to set "none" workaround flags on the command
line and in tools.
o In libipmiconsole, force ipmiconsole_engine_init() to be
called before ipmiconsole_ctx_create().
o Fix libipmiconsole callback semantics.
o Fix libipmiconsole bugs in overriding standard defaults vs.
config file defaults.
o Fix potential race in libipmiconsole during engine teardown.
o Add package version macros to libfreeipmi.
o Add library version macros to all libraries.
o Fix Solaris build bug.
o Fix config output bug in ipmipower.
- update to 1.0.2
o Support --ignore-unrecognized-events in ipmi-sensors.
o Clarify error messages in ipmi-locate.
o Support Supermicro X7DBR-3, X8DTL-3F, X8DT3-LN4F motherboard OEM
sensors.
o Support Dell Module/Board OEM sensor interpretation on Poweredge
R210 motherboards.
o In bmc-info, support motherboards that don't implement Get Device
Guid.
o In bmc-watchdog, fix error logging corner case.
o Support new -r option in ganglia_ipmi_sensors.pl plugin to modify
ipmi hostname.
o Add workaround for SDR caching compliance bug in HP Proliant
DL585G7.
o In bmc-config, add workaround for motherboards that do not allow
you to configure identical usernames.
o Various documentation updates.
- update to 1.0.1
o Remove ipmimonitoring tool. Tool is now superseded by ipmi-sensors
and the new --output-sensor-state option.
o Support --output-event-state option for ipmi-sel to support SEL
event interpretation.
o All config-tools now support multi-channel configuration under
verbose mode.
o Re-architect libipmimonitoring to support all defined IPMI sensor
types, OEM bitmasks, and OEM interpretations.
o Add SEL monitoring support to libipmimonitoring.
o Support new 'interpret' sub-library in libfreeipmi.
o Support interpretation rules for sensors when no states/events occur.
o Support interpretation rules for out of spec sensor states/events.
o Support interpretation rules for OEM sensors and events.
o Move all config files to /etc/freeipmi/. Support legacy config
files for backwards compatibility.
o Support serial keepalive in ipmiconsole to check if serial
connection has remained alive across system reboots.
o Create symlinks and manpage pointers for 'ipmi-power', 'ipmi-ping',
'rmcp-ping', 'ipmi-console', and 'ipmi-detect' to give some additional
consistency to the tool naming.
o Various documentation updates.
o Update to support DCMI 1.1.
o Update all licensing information to GPLv3.
- update to 0.8.12
o In bmc-config, workaround RMCP+ Privilege Level configuration
compliance bugs on HP DL145 servers.
o In ipmi-chassis-config, after configuring boot flags, set valid bits
appropriately.
o Fix N/A output corner case in ipmi-sel.
o Support Supermicro X8DTU-6+ motherboard OEM sensors.
o Fix FRU date/time calculation bug that did not account for leap
years.
- update to 0.8.11
o Support Fujitsu iRMC S1 and iRMC S2 OEM extensions in
ipmi-sensors and ipmi-sel.
o Support --output-oem-event-string in ipmi-sel.
o Other minor documentation/bug fixes.
- update to 0.8.10
o Support many new Inventec OEM extensions in ipmi-oem.
o Support many new Quanta OEM extensions in ipmi-oem.
o Support many new Intel OEM extensions in ipmi-oem.
o Support Intel s5500WB OEM extensions in ipmi-sel.
o Support Intel Node Manager SEL events across Quanta S99Q,
Inventec 5441, Inventec 5442, and Intel S5500WB motherboards.
o Move some OEM extensions from Dell section to Inventec section in
ipmi-oem. Were previously thought to be additions by Dell, but
in fact are not. Backwards compatability supported.
o Support 'assumeio' inband workaround globally.
o Gracefully handle some errors in ipmi-sensors.
o Fix in-band probing corner case.
o Fix various parameter input checks in ipmi-oem.
o Fix help output corner cases in ipmi-oem.
o Other minor documentation/bug fixes.
- update to 0.8.9
o In ipmi-sel and ipmimonitoring, workaround Supermicro H8QME SEL
compliance issues in ipmi-sel.
o In ipmi-sel, do not report error if SEL is empty.
o Support Fujitsu 'get-sel-entry-long-text' in ipmi-oem.
o Fix workaround flags bug in ipmimonitoring.
o Revert 'Open Session Privilege Workaround' changes in 0.8.8, were
unnecessary.
o Fix daylight savings bug when configuring BMC times in bmc-device.
o Support 'veryslowcommit' workaround for config tools to work around
very slow BMCs.
o Support --enable-rawdumps compile option.
o Support SHA256 in IPMI 2.0.
o Other minor bug fixes.
- update to 0.8.8
o Support Supermicro 'get-bmc-services-status' and
'set-bmc-services-status' in ipmi-oem.
o Support bmc-watchdog 'ignorestateflag' workaround around more
issues.
o Support Open Session Privilege Workaround around more related
compliance issues.
o Fix bmc-watchdog --version option.
o Fix legacy workaround corner case in channel detection for
Intel nodes.
o Support Quanta reset-to-defaults command in ipmi-oem.
o Modify ipmiconsole protocol to not deactivate SOL protocol is
SOL is already deactivated.
o Modify ipmiconsole protocol to not error out under several
malformed packet scenarios.
o Fix ipmiping/rmcpping command line parsing corner case.
o Minor documentation updates.
o Minor error message output fixes.
o Support --without-random-device configure option for some
embedded systems.
- update to 0.8.7
o Support Supermicro X8DTG OEM sensors.
o Support Supermicro X8DTG workarounds with 'integritycheckvalue'
workaround flag.
o Document workarounds for Intel S5500WBV/Penguin Relion 700
motherboard.
o Map IPMI 2.0 "invalid role" error code to "privilege level cannot be
obtained" for better usability.
o Fix bmc-config Security Keys commit by making some required fields
optional.
o Fix bmc-watchdog init script return codes on Suse.
o Support 'ignorestateflag' workaround in bmc-watchdog.
o Fix ipmi-sensors corner case for sensors with percentage units.
o Support 'slowcommit' workaround for config tools to work around
slower BMCs.
o Update documentation w/ Supermicro X8DTG issues.
o Update documentation w/ inband troubleshooting.
- update to 0.8.6
o Support Quanta S99Q/Dell FS12-TY OEM SEL events.
o In ipmi-oem, support Quanta S99Q/Dell FS12-TY OEM commands.
o Fix --key-pair parsing bug in all config tools.
o Locally support sunbmc driver if bmc_intf.h header not found.
o If Sunbmc driver is not supported, report "Device Not Supported"
instead of "Internal Error".
o Fix error output messages.
o Fix Solaris install issue.
o Other minor fixes.
* Fri Apr 30 2010 kkaempf@novell.com
- update to 0.8.5
- Support Inventec 5442/Dell Xanadu III OEM events.
- Workaround Quanta S99Q/Dell FS12-TY Node Busy errors.
- Fix some library error checks limiting bmc-config Bad Password
Threshold configuration.
- Fix some library macro names based on actual OEM names.
- Fix documentation typos.
(update to 0.8.4)
- Fix IPMI 2.0 sequence number wrap around corner case.
- Fix ipmi-sensors --comma-separated-output corner case.
- In ipmi-sensors, output multiple event strings w/ space
delimiter in simple output.
- In ipmi-oem, support Dell get-active-lom-status.
- In ipmi-oem, support IBM get-led.
- In ipmi-sel, fix possible --assume-system-event-records
corner case.
- Fix Posix portability issue w/ time functions.
- Minor documentation updates.
* Wed Feb 03 2010 kkaempf@novell.com
- update to 0.8.3
- fix buffer overflow (was: ipmi-messaging-support-cmds.patch)
* Thu Jan 14 2010 kkaempf@novell.com
- adapt_to_suse_docdir.patch: Use /usr/share/doc/packages/$(name)
- add_default_start.patch: Add 'Default-Start:' to init.d scripts
- ipmi-messaging-support-cmds.patch: Fix buffer overflow
* Thu Jan 14 2010 kkaempf@novell.com
- Update to 0.8.2
/usr/lib64/libipmiconsole.so.2 /usr/lib64/libipmiconsole.so.2.3.6
Generated by rpm2html 1.8.1
Fabrice Bellet, Thu Jul 18 00:05:10 2024