slic3r-1.3.0-15.mga9 RPM for i586

From Mageia 9 for i586 / media / core / release

Slic3r is a G-code generator for 3D printers. It's compatible with RepRaps,
Makerbots, Ultimakers and many more machines.
See the project homepage at slic3r.org and the documentation on the Slic3r wiki
for more information.

Provides

• slic3r
• application()
• application(slic3r.desktop)
• bundled(admesh)
• metainfo()
• metainfo(slic3r.appdata.xml)
• perl(GLUquadricObjPtr)
• perl(Slic3r)
• perl(Slic3r::Config)
• perl(Slic3r::Config::Static)
• perl(Slic3r::ExPolygon)
• perl(Slic3r::ExPolygon::Collection)
• perl(Slic3r::ExtrusionLoop)
• perl(Slic3r::ExtrusionPath)
• perl(Slic3r::ExtrusionPath::Collection)
• perl(Slic3r::Filler)
• perl(Slic3r::Flow)
• perl(Slic3r::GCode::ArcFitting)
• perl(Slic3r::GCode::ArcFitting::Arc)
• perl(Slic3r::GCode::MotionPlanner)
• perl(Slic3r::GCode::MotionPlanner::ConfigurationSpace)
• perl(Slic3r::GCode::PressureRegulator)
• perl(Slic3r::GCode::Reader)
• perl(Slic3r::GCode::VibrationLimit)
• perl(Slic3r::GUI)
• perl(Slic3r::GUI::2DBed)
• perl(Slic3r::GUI::3DScene)
• perl(Slic3r::GUI::3DScene::Base)
• perl(Slic3r::GUI::3DScene::Volume)
• perl(Slic3r::GUI::AboutDialog)
• perl(Slic3r::GUI::AboutDialog::Logo)
• perl(Slic3r::GUI::BedShapeDialog)
• perl(Slic3r::GUI::BedShapePanel)
• perl(Slic3r::GUI::BonjourBrowser)
• perl(Slic3r::GUI::ColorScheme)
• perl(Slic3r::GUI::ConfigOptionsGroup)
• perl(Slic3r::GUI::ConfigWizard)
• perl(Slic3r::GUI::ConfigWizard::Index)
• perl(Slic3r::GUI::ConfigWizard::Page)
• perl(Slic3r::GUI::ConfigWizard::Page::Bed)
• perl(Slic3r::GUI::ConfigWizard::Page::BedTemperature)
• perl(Slic3r::GUI::ConfigWizard::Page::Filament)
• perl(Slic3r::GUI::ConfigWizard::Page::Finished)
• perl(Slic3r::GUI::ConfigWizard::Page::Firmware)
• perl(Slic3r::GUI::ConfigWizard::Page::Nozzle)
• perl(Slic3r::GUI::ConfigWizard::Page::Temperature)
• perl(Slic3r::GUI::ConfigWizard::Page::Welcome)
• perl(Slic3r::GUI::Controller)
• perl(Slic3r::GUI::Controller::ManualControlDialog)
• perl(Slic3r::GUI::Controller::PrinterPanel)
• perl(Slic3r::GUI::Controller::PrinterPanel::PrintJob)
• perl(Slic3r::GUI::Controller::PrinterPanel::PrintJobPanel)
• perl(Slic3r::GUI::MainFrame)
• perl(Slic3r::GUI::Notifier)
• perl(Slic3r::GUI::OptionsGroup)
• perl(Slic3r::GUI::OptionsGroup::Field)
• perl(Slic3r::GUI::OptionsGroup::Field::Checkbox)
• perl(Slic3r::GUI::OptionsGroup::Field::Choice)
• perl(Slic3r::GUI::OptionsGroup::Field::ColourPicker)
• perl(Slic3r::GUI::OptionsGroup::Field::NumericChoice)
• perl(Slic3r::GUI::OptionsGroup::Field::Point)
• perl(Slic3r::GUI::OptionsGroup::Field::Point3)
• perl(Slic3r::GUI::OptionsGroup::Field::Slider)
• perl(Slic3r::GUI::OptionsGroup::Field::SpinCtrl)
• perl(Slic3r::GUI::OptionsGroup::Field::TextCtrl)
• perl(Slic3r::GUI::OptionsGroup::Field::wxSizer)
• perl(Slic3r::GUI::OptionsGroup::Field::wxWindow)
• perl(Slic3r::GUI::OptionsGroup::Line)
• perl(Slic3r::GUI::OptionsGroup::Option)
• perl(Slic3r::GUI::OptionsGroup::StaticText)
• perl(Slic3r::GUI::Plater)
• perl(Slic3r::GUI::Plater::2D)
• perl(Slic3r::GUI::Plater::2DToolpaths)
• perl(Slic3r::GUI::Plater::2DToolpaths::Canvas)
• perl(Slic3r::GUI::Plater::2DToolpaths::Dialog)
• perl(Slic3r::GUI::Plater::3D)
• perl(Slic3r::GUI::Plater::3DPreview)
• perl(Slic3r::GUI::Plater::DropTarget)
• perl(Slic3r::GUI::Plater::LambdaObjectDialog)
• perl(Slic3r::GUI::Plater::Object)
• perl(Slic3r::GUI::Plater::ObjectCutDialog)
• perl(Slic3r::GUI::Plater::ObjectDialog::AdaptiveLayersTab)
• perl(Slic3r::GUI::Plater::ObjectDialog::BaseTab)
• perl(Slic3r::GUI::Plater::ObjectDialog::LayersTab)
• perl(Slic3r::GUI::Plater::ObjectPartsPanel)
• perl(Slic3r::GUI::Plater::ObjectSettingsDialog)
• perl(Slic3r::GUI::Plater::OctoPrintSpoolDialog)
• perl(Slic3r::GUI::Plater::OverrideSettingsPanel)
• perl(Slic3r::GUI::Plater::SplineControl)
• perl(Slic3r::GUI::Plater::UndoOperation)
• perl(Slic3r::GUI::Preferences)
• perl(Slic3r::GUI::Preset)
• perl(Slic3r::GUI::PresetEditor)
• perl(Slic3r::GUI::PresetEditor::Filament)
• perl(Slic3r::GUI::PresetEditor::Page)
• perl(Slic3r::GUI::PresetEditor::Print)
• perl(Slic3r::GUI::PresetEditor::Printer)
• perl(Slic3r::GUI::PresetEditorDialog)
• perl(Slic3r::GUI::PresetEditorDialog::Filament)
• perl(Slic3r::GUI::PresetEditorDialog::Print)
• perl(Slic3r::GUI::PresetEditorDialog::Printer)
• perl(Slic3r::GUI::ProgressStatusBar)
• perl(Slic3r::GUI::Projector)
• perl(Slic3r::GUI::Projector::Controller)
• perl(Slic3r::GUI::Projector::Screen)
• perl(Slic3r::GUI::ReloadDialog)
• perl(Slic3r::GUI::SLAPrintOptions)
• perl(Slic3r::GUI::SavePresetWindow)
• perl(Slic3r::GUI::_3DScene::GLVertexArray)
• perl(Slic3r::Geometry)
• perl(Slic3r::Geometry::Clipper)
• perl(Slic3r::Layer)
• perl(Slic3r::Layer::Support)
• perl(Slic3r::Line)
• perl(Slic3r::Model)
• perl(Slic3r::Model::Material)
• perl(Slic3r::Model::Object)
• perl(Slic3r::Point)
• perl(Slic3r::Point3)
• perl(Slic3r::Pointf)
• perl(Slic3r::Pointf3)
• perl(Slic3r::Polygon)
• perl(Slic3r::Polyline)
• perl(Slic3r::Polyline::Collection)
• perl(Slic3r::Print)
• perl(Slic3r::Print::GCode)
• perl(Slic3r::Print::Object)
• perl(Slic3r::Print::Simple)
• perl(Slic3r::Print::State)
• perl(Slic3r::Print::SupportMaterial)
• perl(Slic3r::SVG)
• perl(Slic3r::Surface)
• perl(Slic3r::Surface::Collection)
• perl(Slic3r::Test)
• perl(Slic3r::Test::Print)
• perl(Slic3r::Test::SectionCut)
• perl(Slic3r::XS)
• slic3r(x86-32)

Requires

• ld-linux.so.2
• ld-linux.so.2(GLIBC_2.3)
• libboost_filesystem.so.1.81.0
• libboost_thread.so.1.81.0
• libc.so.6
• libc.so.6(GLIBC_2.0)
• libc.so.6(GLIBC_2.1)
• libc.so.6(GLIBC_2.1.3)
• libc.so.6(GLIBC_2.17)
• libc.so.6(GLIBC_2.2)
• libc.so.6(GLIBC_2.28)
• libc.so.6(GLIBC_2.3.2)
• libc.so.6(GLIBC_2.3.4)
• libc.so.6(GLIBC_2.32)
• libc.so.6(GLIBC_2.33)
• libc.so.6(GLIBC_2.34)
• libc.so.6(GLIBC_2.4)
• libc.so.6(GLIBC_2.7)
• libc.so.6(GLIBC_2.8)
• libc.so.6(GLIBC_2.9)
• libexpat.so.1
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.0)
• libpoly2tri.so.1.0
• libpolyclipping.so.22
• libstdc++.so.6
• libstdc++.so.6(CXXABI_1.3)
• libstdc++.so.6(CXXABI_1.3.11)
• libstdc++.so.6(CXXABI_1.3.13)
• libstdc++.so.6(CXXABI_1.3.3)
• libstdc++.so.6(CXXABI_1.3.8)
• libstdc++.so.6(GLIBCXX_3.4)
• libstdc++.so.6(GLIBCXX_3.4.11)
• libstdc++.so.6(GLIBCXX_3.4.14)
• libstdc++.so.6(GLIBCXX_3.4.15)
• libstdc++.so.6(GLIBCXX_3.4.20)
• libstdc++.so.6(GLIBCXX_3.4.21)
• libstdc++.so.6(GLIBCXX_3.4.26)
• libstdc++.so.6(GLIBCXX_3.4.29)
• libstdc++.so.6(GLIBCXX_3.4.9)
• perl >= 1:5.10
• perl(Carp)
• perl(Class::Accessor)
• perl(Config)
• perl(Encode)
• perl(Encode::Locale) >= 1.50.0
• perl(Exporter)
• perl(File::Basename)
• perl(File::Spec)
• perl(FindBin)
• perl(Getopt::Long)
• perl(IO::Scalar)
• perl(LWP::UserAgent)
• perl(List::Util)
• perl(Math::Trig)
• perl(Moo) >= 1.3.1
• perl(OpenGL)
• perl(POSIX)
• perl(SVG)
• perl(Scalar::Util)
• perl(Slic3r)
• perl(Slic3r::Config)
• perl(Slic3r::ExPolygon)
• perl(Slic3r::ExtrusionLoop)
• perl(Slic3r::ExtrusionPath)
• perl(Slic3r::Flow)
• perl(Slic3r::GCode::ArcFitting)
• perl(Slic3r::GCode::MotionPlanner)
• perl(Slic3r::GCode::PressureRegulator)
• perl(Slic3r::GCode::Reader)
• perl(Slic3r::GCode::VibrationLimit)
• perl(Slic3r::GUI::2DBed)
• perl(Slic3r::GUI::3DScene)
• perl(Slic3r::GUI::3DScene::Base)
• perl(Slic3r::GUI::AboutDialog)
• perl(Slic3r::GUI::BedShapeDialog)
• perl(Slic3r::GUI::BonjourBrowser)
• perl(Slic3r::GUI::ColorScheme)
• perl(Slic3r::GUI::ConfigWizard)
• perl(Slic3r::GUI::ConfigWizard::Page)
• perl(Slic3r::GUI::Controller)
• perl(Slic3r::GUI::Controller::ManualControlDialog)
• perl(Slic3r::GUI::Controller::PrinterPanel)
• perl(Slic3r::GUI::MainFrame)
• perl(Slic3r::GUI::Notifier)
• perl(Slic3r::GUI::OptionsGroup)
• perl(Slic3r::GUI::OptionsGroup::Field)
• perl(Slic3r::GUI::Plater)
• perl(Slic3r::GUI::Plater::2D)
• perl(Slic3r::GUI::Plater::2DToolpaths)
• perl(Slic3r::GUI::Plater::3D)
• perl(Slic3r::GUI::Plater::3DPreview)
• perl(Slic3r::GUI::Plater::LambdaObjectDialog)
• perl(Slic3r::GUI::Plater::ObjectCutDialog)
• perl(Slic3r::GUI::Plater::ObjectDialog::BaseTab)
• perl(Slic3r::GUI::Plater::ObjectPartsPanel)
• perl(Slic3r::GUI::Plater::ObjectSettingsDialog)
• perl(Slic3r::GUI::Plater::OverrideSettingsPanel)
• perl(Slic3r::GUI::Plater::SplineControl)
• perl(Slic3r::GUI::Preferences)
• perl(Slic3r::GUI::Preset)
• perl(Slic3r::GUI::PresetEditor)
• perl(Slic3r::GUI::PresetEditorDialog)
• perl(Slic3r::GUI::ProgressStatusBar)
• perl(Slic3r::GUI::Projector)
• perl(Slic3r::GUI::ReloadDialog)
• perl(Slic3r::GUI::SLAPrintOptions)
• perl(Slic3r::Geometry)
• perl(Slic3r::Geometry::Clipper)
• perl(Slic3r::Layer)
• perl(Slic3r::Line)
• perl(Slic3r::Model)
• perl(Slic3r::Point)
• perl(Slic3r::Polygon)
• perl(Slic3r::Polyline)
• perl(Slic3r::Print)
• perl(Slic3r::Print::GCode)
• perl(Slic3r::Print::Object)
• perl(Slic3r::Print::Simple)
• perl(Slic3r::Print::State)
• perl(Slic3r::Print::SupportMaterial)
• perl(Slic3r::SVG)
• perl(Slic3r::Surface)
• perl(Slic3r::XS)
• perl(Thread::Semaphore)
• perl(Time::HiRes)
• perl(Unicode::Normalize)
• perl(Wx) >= 0.990.100
• perl(Wx::AUI)
• perl(Wx::App)
• perl(Wx::DND)
• perl(Wx::Dialog)
• perl(Wx::Event)
• perl(Wx::FileDropTarget)
• perl(Wx::Frame)
• perl(Wx::GLCanvas)
• perl(Wx::Grid)
• perl(Wx::Html)
• perl(Wx::Panel)
• perl(Wx::Print)
• perl(Wx::ScrolledWindow)
• perl(Wx::StaticText)
• perl(Wx::StatusBar)
• perl(Wx::Wizard)
• perl(Wx::WizardPage)
• perl(XML::SAX)
• perl(XSLoader)
• perl(base)
• perl(constant)
• perl(lib)
• perl(local::lib)
• perl(parent)
• perl(strict)
• perl(threads) >= 1.960.0
• perl(threads::shared)
• perl(utf8)
• perl(vars)
• perl(warnings)
• perl-base >= 2:5.36.0
• perl-threads >= 1.960.0
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

AGPLv3

Changelog

* Sat Dec 24 2022 wally <wally> 1.3.0-15.mga9
  + Revision: 1926529
  - rebuild for boost 1.81.0
* Sun Jul 03 2022 wally <wally> 1.3.0-14.mga9
  + Revision: 1867310
  - rebuild for boost 1.79.0
* Sat May 21 2022 wally <wally> 1.3.0-13.mga9
  + Revision: 1859679
  - rebuild for poly2tri 20220520 snapshot
* Sat Apr 02 2022 umeabot <umeabot> 1.3.0-12.mga9
  + Revision: 1840100
  - Mageia 9 Mass Rebuild
* Wed Dec 22 2021 wally <wally> 1.3.0-11.mga9
  + Revision: 1763302
  - rebuild for missing pkgs in armv7hl
* Sun Dec 19 2021 wally <wally> 1.3.0-10.mga9
  + Revision: 1762606
  - rebuild for boost 1.78.0
* Thu Sep 09 2021 wally <wally> 1.3.0-9.mga9
  + Revision: 1744650
  - rebuild for boost 1.77.0
* Wed Jun 02 2021 ns80 <ns80> 1.3.0-8.mga9
  + Revision: 1729201
  - add Fedora patch for CVE-2020-28591 (mga#29020)
* Fri May 14 2021 wally <wally> 1.3.0-7.mga9
  + Revision: 1723017
  - rebuild for boost 1.76.0
* Thu Dec 31 2020 wally <wally> 1.3.0-6.mga8
  + Revision: 1666816
  - rebuild for boost 1.75.0

Files

/usr/bin/slic3r
/usr/lib/.build-id
/usr/lib/.build-id/71
/usr/lib/.build-id/71/247547bf7546b898813df9bb0a8927b0f90234
/usr/lib/perl5/vendor_perl/Slic3r
/usr/lib/perl5/vendor_perl/Slic3r/XS.pm
/usr/lib/perl5/vendor_perl/auto/Slic3r
/usr/lib/perl5/vendor_perl/auto/Slic3r/XS
/usr/lib/perl5/vendor_perl/auto/Slic3r/XS/XS.so
/usr/share/appdata/slic3r.appdata.xml
/usr/share/applications/slic3r.desktop
/usr/share/doc/slic3r
/usr/share/doc/slic3r/README.md
/usr/share/icons/hicolor/128x128/apps/slic3r.png
/usr/share/icons/hicolor/16x16/apps/slic3r.png
/usr/share/icons/hicolor/256x256/apps/slic3r.png
/usr/share/icons/hicolor/32x32/apps/slic3r.png
/usr/share/icons/hicolor/48x48/apps/slic3r.png
/usr/share/perl5/vendor_perl/Slic3r
/usr/share/perl5/vendor_perl/Slic3r.pm
/usr/share/perl5/vendor_perl/Slic3r/Config.pm
/usr/share/perl5/vendor_perl/Slic3r/ExPolygon.pm
/usr/share/perl5/vendor_perl/Slic3r/ExtrusionLoop.pm
/usr/share/perl5/vendor_perl/Slic3r/ExtrusionPath.pm
/usr/share/perl5/vendor_perl/Slic3r/Flow.pm
/usr/share/perl5/vendor_perl/Slic3r/GCode
/usr/share/perl5/vendor_perl/Slic3r/GCode/ArcFitting.pm
/usr/share/perl5/vendor_perl/Slic3r/GCode/MotionPlanner.pm
/usr/share/perl5/vendor_perl/Slic3r/GCode/PressureRegulator.pm
/usr/share/perl5/vendor_perl/Slic3r/GCode/Reader.pm
/usr/share/perl5/vendor_perl/Slic3r/GCode/VibrationLimit.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI
/usr/share/perl5/vendor_perl/Slic3r/GUI.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/2DBed.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/3DScene.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/AboutDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/BedShapeDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/BonjourBrowser.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/ColorScheme.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/ConfigWizard.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Controller
/usr/share/perl5/vendor_perl/Slic3r/GUI/Controller.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Controller/ManualControlDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Controller/PrinterPanel.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/MainFrame.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Notifier.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/OptionsGroup
/usr/share/perl5/vendor_perl/Slic3r/GUI/OptionsGroup.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/OptionsGroup/Field.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2D.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/2DToolpaths.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/3D.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/3DPreview.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/LambdaObjectDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/ObjectCutDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/ObjectPartsPanel.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/ObjectSettingsDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/OverrideSettingsPanel.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Plater/SplineControl.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Preferences.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Preset.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/PresetEditor.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/PresetEditorDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/ProgressStatusBar.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/Projector.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/ReloadDialog.pm
/usr/share/perl5/vendor_perl/Slic3r/GUI/SLAPrintOptions.pm
/usr/share/perl5/vendor_perl/Slic3r/Geometry
/usr/share/perl5/vendor_perl/Slic3r/Geometry.pm
/usr/share/perl5/vendor_perl/Slic3r/Geometry/Clipper.pm
/usr/share/perl5/vendor_perl/Slic3r/Layer.pm
/usr/share/perl5/vendor_perl/Slic3r/Line.pm
/usr/share/perl5/vendor_perl/Slic3r/Model.pm
/usr/share/perl5/vendor_perl/Slic3r/Point.pm
/usr/share/perl5/vendor_perl/Slic3r/Polygon.pm
/usr/share/perl5/vendor_perl/Slic3r/Polyline.pm
/usr/share/perl5/vendor_perl/Slic3r/Print
/usr/share/perl5/vendor_perl/Slic3r/Print.pm
/usr/share/perl5/vendor_perl/Slic3r/Print/GCode.pm
/usr/share/perl5/vendor_perl/Slic3r/Print/Object.pm
/usr/share/perl5/vendor_perl/Slic3r/Print/Simple.pm
/usr/share/perl5/vendor_perl/Slic3r/Print/State.pm
/usr/share/perl5/vendor_perl/Slic3r/Print/SupportMaterial.pm
/usr/share/perl5/vendor_perl/Slic3r/SVG.pm
/usr/share/perl5/vendor_perl/Slic3r/Surface.pm
/usr/share/perl5/vendor_perl/Slic3r/Test
/usr/share/perl5/vendor_perl/Slic3r/Test.pm
/usr/share/perl5/vendor_perl/Slic3r/Test/SectionCut.pm
/usr/share/slic3r
/usr/share/slic3r/Slic3r.icns
/usr/share/slic3r/Slic3r.ico
/usr/share/slic3r/Slic3r.png
/usr/share/slic3r/Slic3r_128px.png
/usr/share/slic3r/Slic3r_192px.png
/usr/share/slic3r/Slic3r_192px_transparent.png
/usr/share/slic3r/add.png
/usr/share/slic3r/application_view_tile.png
/usr/share/slic3r/arrow_down.png
/usr/share/slic3r/arrow_in.png
/usr/share/slic3r/arrow_left.png
/usr/share/slic3r/arrow_out.png
/usr/share/slic3r/arrow_redo.png
/usr/share/slic3r/arrow_refresh.png
/usr/share/slic3r/arrow_right.png
/usr/share/slic3r/arrow_rotate_anticlockwise.png
/usr/share/slic3r/arrow_rotate_clockwise.png
/usr/share/slic3r/arrow_undo.png
/usr/share/slic3r/arrow_up.png
/usr/share/slic3r/box.png
/usr/share/slic3r/brick.png
/usr/share/slic3r/brick_add.png
/usr/share/slic3r/brick_delete.png
/usr/share/slic3r/brick_go.png
/usr/share/slic3r/bricks.png
/usr/share/slic3r/building.png
/usr/share/slic3r/bullet_black.png
/usr/share/slic3r/bullet_blue.png
/usr/share/slic3r/bullet_green.png
/usr/share/slic3r/bullet_red.png
/usr/share/slic3r/bullet_white.png
/usr/share/slic3r/cog.png
/usr/share/slic3r/cog_go.png
/usr/share/slic3r/control_pause.png
/usr/share/slic3r/control_pause_blue.png
/usr/share/slic3r/control_play.png
/usr/share/slic3r/control_play_blue.png
/usr/share/slic3r/control_stop.png
/usr/share/slic3r/control_stop_blue.png
/usr/share/slic3r/cross.png
/usr/share/slic3r/delete.png
/usr/share/slic3r/disk.png
/usr/share/slic3r/error.png
/usr/share/slic3r/film.png
/usr/share/slic3r/funnel.png
/usr/share/slic3r/gcode.icns
/usr/share/slic3r/gcode.ico
/usr/share/slic3r/hourglass.png
/usr/share/slic3r/house.png
/usr/share/slic3r/infill.png
/usr/share/slic3r/joystick.png
/usr/share/slic3r/layers.png
/usr/share/slic3r/lorry_add.png
/usr/share/slic3r/lorry_go.png
/usr/share/slic3r/lorry_import.png
/usr/share/slic3r/map_add.png
/usr/share/slic3r/note.png
/usr/share/slic3r/package.png
/usr/share/slic3r/package_green.png
/usr/share/slic3r/page_white_go.png
/usr/share/slic3r/plugin.png
/usr/share/slic3r/plugin_add.png
/usr/share/slic3r/plugin_go.png
/usr/share/slic3r/printer_empty.png
/usr/share/slic3r/script.png
/usr/share/slic3r/shape_flip_horizontal.png
/usr/share/slic3r/shape_handles.png
/usr/share/slic3r/shape_ungroup.png
/usr/share/slic3r/slt.ico
/usr/share/slic3r/spool.png
/usr/share/slic3r/stl.icns
/usr/share/slic3r/tag_blue.png
/usr/share/slic3r/textfield.png
/usr/share/slic3r/tick.png
/usr/share/slic3r/time.png
/usr/share/slic3r/variable_layer_height.png
/usr/share/slic3r/wand.png
/usr/share/slic3r/wrench.png
/usr/share/slic3r/zoom.png
/usr/share/slic3r/zoom_in.png
/usr/share/slic3r/zoom_out.png

Generated by rpm2html 1.8.1

Fabrice Bellet, Sun Apr 28 05:37:45 2024