Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

i3status-2.13-1.2 RPM for armv7hl

From OpenSuSE Ports Tumbleweed for armv7hl

Name: i3status Distribution: openSUSE Tumbleweed
Version: 2.13 Vendor: openSUSE
Release: 1.2 Build date: Thu Nov 28 02:29:18 2019
Group: System/Monitoring Build host: armbuild15
Size: 129519 Source RPM: i3status-2.13-1.2.src.rpm
Summary: I3 Status Bar
i3status is a program for generating a status bar for i3bar, dzen2,
xmobar or similar programs. It issues a small number of system
calls, as one generally wants to update such status lines every
second so that the bar is updated even under load. It saves a bit of
energy by being more efficient than shell commands.






* Mon Sep 09 2019 Dan Čermák <>
  - update to version 2.13:
    * add memory module
    * add read_file module
    * drop CAP_NET_ADMIN (not needed on Linux ≥ 2.6.37)
    * switch to autotools
    * battery: hide seconds by default
    * wireless: add format_quality
    * doc: clarify min_width not being supported with dzen2/xmobar
    * battery: read multiple batteries on DragonFlyBSD
    * make: don’t use pulseaudio on DragonFlyBSD
    * wireless: detect interface type on DragonFlyBSD
    * cpu usage: fix: correctly print usage for cpu 10
    * cpu usage: fix: correctly print for invalid %cpu placeholder
    * cpu usage: support non-consecutive CPUs
    * time: add only_when_tz_different option
    * ethernet: add %interface
    * ethernet: fix speed display for 100 Gbit/s cards
    * battery: handle POWER_SUPPLY_STATUS=Not charging
    * volume: provide more natural volume percentage with ALSA
    * volume: fix ALSA capture device monitoring
    * volume: implement %devicename for PulseAudio and ALSA
    * config: re-arrange disk after network interfaces
    * fix: include sys/socket.h on macOS
    * fix: strip network interface labels
    * fix glob(3) error handling
    * various testsuite improvements
    * switch to clang-format-3.8
* Fri May 18 2018
  - Ensure neutrality of description.
* Sat May 12 2018
  - update to version 2.12:
    * show IP address when address has a label
    * treat zero battery capacity as "not available"
    * add IPv6 address when IPv4 isn't available
    * call tzset at each time print to pick up time zone changes
    * doc: fixed minor typos
    * be more cautious about handling invalid battery measurements.
    * fix CPU unit tests
    * use local timezone for battery %emptytime
    * fix memory leak/use BEGINS_WITH macro
    * _first_: add check for virtual ethernet devices
    * add battery capacity parsing
    * multiple CPU support for cpu_usage
    * remove useless checks (we use char, not unsigned char) to fix
    compilation warnings
    * disk: sanitize trailing slashes
    * suppress printing :00 seconds of remaining battery lifetime, as
    apm(4)'s estimate only has a granularity of minutes.
    * Makefile: make PKG_CONFIG overridable
    * man page updates
  - cleanup with spec-cleaner
  - use https urls
  - remove yajl fallback from source to ensure ours is used
  - remove SLOC comment from description (no longer valid)
* Wed Apr 12 2017
  - update to version 2.11:
    * re-add forgotten wakeup call from SIGUSR1 handler
    * disk_info: bugfix: check format_not_mounted is not NULL before
      using it
    * revert back to using nanosleep
    * man: give more descriptive symbols to battery format
    * battery: removes the 'remaining' time when the battery is full
    * add separator and separator_block_width as universal module
    * man: fix link to contrib
    * cpu_temperature: add glob check
    * battery: add status_unk
    * reconnect to PluseAudio when connection is lost
    * wireless: add ifdef to compile on macOS
    * order default configuration paths the same as in i3
    * add version files for release tarball
    * man: make tztime example config match the context
    * cpu_usage: add color thresholds
    * battery: support multiple batteries
    * disk: use empty string for not mounted disks
    * default config: remove DHCP, VPN
    * wireless: fix FTBFS on hurd and kFreeBSD
    * parse uevent file to detect network device type
    * allow pulse device to be specified by name
    * battery: find batteries using glob
    * tztime: support locales
    * wireless: use blank padding for quality
    * add unit tests
    * fix compilation with -fno-common
* Tue Mar 08 2016
  - specfile:
    * add libnl3-devel, libpulse-devel
  - update to version 2.10:
    * man: fix typo in battery example
    * Pass the "instance" JSON property key for tztime blocks
    * Fix build (and build warnings) on FreeBSD
    * Fix build on OpenBSD
    * path_exists, run_watch: add format_down
    * volume: add PulseAudio support. This significantly reduces battery
      consumption on systems that use PulseAudio, which is the default
      on any modern Linux desktop.
    * wireless/OpenBSD: use the maximum rssi, not the scaled percentage
      for the signal level.
    * make: Add support for differing PREFIX and MANPREFIX.
    * battery: make output HH:MM across all platforms.
    * battery: clamp the percentage at 100% when last_full_capacity is
    * Use format_not_mounted if the directory for a disk_info block does
      not exist.
    * disk_info/OS X: Fix build.
    * volume/OpenBSD: use SndIO.
    * eth, wireless: Use "color_degraded" when interface has no IP.
    * eth, wireless/FreeBSD: Fix for recent FreeBSD versions.
    * wireless/Linux: switch from libiw to libnl. This allows you to run
      i3status on kernels which don’t have the wext compatibility module
    * battery/FreeBSD: properly detect charging status
    * eth: first_eth_interface: ignore MAC addresses, look for IPv4/IPv6
    * Implement support for Pango markup.
    * format detection: recognise swaybar
* Mon Jun 08 2015
  - update to version 2.9:
    * meta: i3status is now on GitHub and uses clang-format
    * allow customization of the module separator
    * add “align” and “min_width” options for each module
    * fix CFLAGS and LDFLAGS for DragonFly and FreeBSD
    * add contrib/net-speed, a more light-weight reimplementation of
    * contrib/measure-net-speed.bash
    * battery: add hide_seconds option
    * battery: fix for systems without POWER_SUPPLY_VOLTAGE_NOW
    * battery: for %percentage, drop leading 0 for values < 10
    * battery: add NetBSD support
    * battery: use absolute values for (dis)charging rates
    * battery: introduce status_{chr,bat,full}
    * cpu_temperature: fix displaying multiple sensors
    * cpu_temperature: fix NetBSD support
    * cpu_temperature: fix DragonFly support
    * disk: introduce threshold_type and low_threshold
    * disk: add format_not_mounted for unmounted paths
    * ethernet, wireless: support special interface name _first_
    * run_watch: check all matching pid files until first valid one
    * volume: fix wrong color tags with xmobar
    * wireless: support %frequency (2.4 vs. 5 GHz)
* Sun Feb 01 2015
  - replaced tar-ball with tar-ball from Source location
    (they were different for some location, which was the
    reason the package didn't get updated in Factory)
  - Removed i3status-2.7-makefile.patch
* Sat Jul 26 2014
  Fix build on GNU/Hurd
    Add format_down for battery if no battery is available
    Use degraded color in case volume is muted with OSS
    Support mixer_idx with OSS
    Enable colored output for battery on FreeBSD
    print_volume: don’t return, complete the buffer first
    Support colored output for CPU temperature on FreeBSD
    manpage: mention i3bar in the description
    manpage: be more explicit about the path option
    battery: use path as i3bar JSON “instance”
    print_volume(linux): Open a new mixer every time
    Implement term output format
    signal handler: set flag because directly calling fprintf() is unsafe
    Makefile: use .SILENT and support V=1 for verbose builds
    load: allow max_threshold to be a float
    manpage: Add example path for CPU temperature
    Fix build on NetBSD
    Implement cpu usage, ethernet status, cpu temperature on NetBSD
    fix slurp(), it needs to read size-1 for the trailing NUL
    format detection: simplify code, handle "sh" processes in the hierarchy
    default config: show %avail disk space instead of %free
    Added different format string for volume in case it is muted
    manpage: document format_muted
    add support for path_exists directive
    disk: Distinguish between IEC, SI and custom prefixes
* Thu Mar 14 2013
  - Update to 2.7 version
    * Skip a day in the Discordian calendar when St. Tib's Day has
    * colors: Handle down wireless interfaces just like ethernet
    * temperature: introduce max_threshold
    * battery: colorize output even without discharge rate
    * ddate: Reduce the season day to 0-9 to properly print ordinal
    * add good, degraded and bad colors per module
    * config: introduce an utf-8 character so that editors are forced
      to use utf-8
    * ddate: Teen ordinal numbers always use a 'th' suffix.
    * make SIGUSR1 do nothing, so that killall -USR1 i3status will
      force an update
    * changing volume color from bad to degraded if muted
    * make refreshs align with minutes
    * wifi: properly display ad-hoc networks
    * Bugfix: output auto detect: properly detect ambiguous situations
    * Add tztime module to support multiple different timezones
    * battery: add option to show capacity without decimals
    * Add colorized output for load avg
    * ipv6: properly handle colors for output_format == xmobar
    * contrib: fix premature insetion of status message into JSON
  - Spec file cleanup
    * rebased i3status-makefile.patch and renamed as
* Sat Nov 24 2012
  - initial version (2.6)



Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Apr 18 00:45:46 2020