| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libmm-glib0 | Distribution: openSUSE Leap 15.2 |
| Version: 1.12.6 | Vendor: openSUSE |
| Release: lp152.1.1 | Build date: Fri Mar 6 15:40:32 2020 |
| Group: System/Libraries | Build host: obs-arm-1 |
| Size: 992704 | Source RPM: ModemManager-1.12.6-lp152.1.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: http://cgit.freedesktop.org/ModemManager/ModemManager | |
| Summary: Glib bindings for the modem handling DBus interface | |
DBus interface for modem handling. Provides a standard abstracted API (over DBus) to communicate with all sorts of modems (landline, GSM, CDMA).
GPL-2.0-or-later AND GPL-3.0-or-later
* Wed Feb 12 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 1.12.6:
+ SIM: Updated logic to avoid sending PIN/PUK to the SIM card
when not required (e.g. if already unlocked).
+ Simple interface: Avoid aborting connection if SIM-PUK2 locked,
as PIN2/PUK2 doesn't prevent us from getting connected.
+ Location interface: Fixed memory leak happening as soon as a
position fix was obtained and gps-raw location source was
enabled.
+ Core:
- Fixed handling of 0x00 bytes at the end of GSM encoded
strings.
- Fixed cleaning up 'timed-out' signal on the serial port
objects.
- Fixed logic that closes MBIM ports during cleanup.
+ Several other minor fixes and memory leak plugs.
- Changes from version 1.12.4:
+ Core: Added missing ME error codes when building GError
variables for the MM_MOBILE_EQUIPMENT_ERROR domain.
+ Bearer: Avoid connection checks or stats updates while
disconnecting.
+ Serial port: Fix segfault when port flash operation gets
cancelled.
+ Simple interface: Fix the ongoing connection cancellable
handling.
+ Voice interface: Fix segfault when voice support check fails.
+ QMI: Fixed several memory leaks, including a severe one
happening when multiple GPS sources (e.g. raw and nmea) were
enabled at the same time.
+ Plugins: ublox: ignore errors when attempting to disconnect
last bearer.
+ mmcli: Allow "yes" and "no" as boolean strings.
+ Several other minor fixes and memory leak plugs.
- Changes from version 1.12.2:
+ Simple interface: Avoid assertion on the ongoing connect
cancellable.
+ Plugin manager:
- Fix waiting the minimum probing time.
- Explicitly cancel timeouts when device probing is cancelled.
- Disable lazy plugin loading, we now require all missing
symbols to be resolved at loading time for a plugin to
correctly be loaded.
+ Bearer: Avoid reporting disconnection error if trying to
disconnect a bearer that is already disconnected.
+ MBIM: Completely skip LTE attach config/status if unsupported.
+ QMI:
- Make current settings mandatory when using 'static'
addressing.
- Handle disconnection indications during connection attempt.
- Explicitly close QMI port during disconnection if it was
opened during a connection attempt.
+ Plugins:
- huawei: avoid using QCDM port during a voice call.
- sierra: added port type hints for the EM7565.
- dell,dw5821e: added support for the DW5821e with eSIM
variant.
+ mmcli: Fix printing empty value lists in human-friendly output.
+ Several other minor fixes and memory leak plugs.
* Wed Nov 06 2019 Martin Hauke <mardnh@gmx.de>
- Update to version 1.12.0
+ Modem interface:
- Updated logic to avoid assuming that setting bands or modes
is immediate, the daemon will now actively monitor for those
updates to happen before returning success.
+ 3GPP interface:
- libmm-glib: deprecated the mm_pco_list_free() helper method.
+ Simple interface:
- api,libmm-glib: deprecated the 'subscription state' property.
+ Location interface:
- Fixed 'unknown' lat/long/alt numeric values.
- Added support for MSB A-GPS in addition to MSA A-GPS.
+ Voice interface:
- Improved voice call management with call id detection and
tracking.
- Improved detailed call state transitions on generic modems
that support call list polling.
- Added support for GSM supplementary services, including call
waiting, call transfer, call deflection, multiparty calls...
- Added emergency call support, allowing voice call to
emergency numbers even without SIM or with SIM-PIN locked.
- Deprecated all properties except for 'number' in the
CreateCall() method.
+ Messaging interface:
- Updated to report SMS timestamps in correct ISO8601 format.
+ Bearer:
- Improved unused CID lookup to allow selecting non-sequential
CIDs.
- Disabled all AT protocol based context monitoring when PPP
is used for the connection, in order to properly sync with
pppd, which should be the one detecting the disconnections
+ QMI:
- Improved support to list stored firmware images in Sierra
devices.
- Added additional lock check retries on 'SIM not inserted'
errors.
- Updated explicit registration attempt to report success only
when the target requested network is registered.
- Added MSB A-GPS support.
- Implemented automatic carrier configuration selection using
PDC service (already in 1.10.2).
+ mmcli:
- New machine-readable JSON output with '--output-json'.
- Updated to allow using the modem UID to specify SIM
operations.
+ udev:
- New ID_MM_PORT_TYPE_AUDIO generic udev tag to identify ports
that should be used for in-band audio.
- Removed support for the ID_MM_PLATFORM_DRIVER_PROBE udev
tag, as it is no longer required given that the more generic
explicit whitelist may be used to flag which devices should
be probed.
- Renamed ID_MM_DEVICE_MANUAL_SCAN_ONLY to
ID_MM_TTY_MANUAL_SCAN_ONLY, given that the tag only applies
to TTYs.
- ID_MM_DEVICE_IGNORE is no longer used internally in
ModemManager, and is instead targeted to users that want to
explicitly ignore specific devices regardless of what filter
type is in use (already in 1.10.6).
+ dbus:
- Updated to always report the registered
MM_CORE_ERROR_CANCELLED error instead of the implicit
G_IO_ERROR_CANCELLED ones generated by GLib.
+ GObject introspection:
- Fixed setup to explicitly skip all non-API methods.
+ Plugins:
- tplink: new plugin.
- dlink: new plugin.
- xmm: added MSB A-GPS support.
- dell,dw5821e: update to allow unmanaged GPS support on the
TTY even when raw/NMEA GPS is enabled via QMI/LOC.
- quectel: updated to allow TTY-only devices.
- telit: added GPS support.
- telit: improved band management with #BND.
- simtech: added improved voice call support.
- simtech: added support for LTE devices.
- simtech: improved signal quality reporting logic.
- simtech: added GPS support for the SIM7000/SIM7600 family.
- cinterion: added support for time updates.
- cinterion: added improved voice call support.
- ublox: added improved voice call support.
- ublox: improved band management with UBANDSEL.
* Fri Nov 01 2019 Martin Hauke <mardnh@gmx.de>
- Update to version 1.10.8:
+ Polkit policy:
+ Added several missing methods to the policy rules.
+ Use the explicit Firmware policy for all firmware operations.
+ Updated USSD policy to require user authentication in strict
mode.
+ systemd service:
- Always start after polkit service when policy control is
enabled.
+ Broadband modem:
- Fixed signal quality reporting when +CSQ is used.
+ 3GPP:
- Fixed reporting 'denied' registration state.
+ QMI:
- Fixed NAS SSP support check during supported capability loading.
+ Simple interface:
- Allow one single ongoing Connect() attempt.
- Fixed Disconnect() when an explicit bearer path is given.
+ mmcli:
- Fixed key-value output when printing array with 10 elements.
+ Plugins:
- simtech: added port type hints for the SIM7000/SIM7600 family.
- x22x: added support for the Alcatel X602D.
- telit: increased timeout for AT#REBOOT.
- quectel: fixed port type hints for the EG91.
- quectel: added port type hints for the BG96.
- Update to version 1.10.6:
+ Bearer: if connecting a bearer with PPP method, require upper layers
to disconnect the bearer explicitly and completely ignore the
connectivity checks performed by the modem itself. This makes sure
that the TTY is not reused by ModemManager before pppd has finished
using it.
+ Serial port:
- Fix serial port flash cancellation logic to avoid assertion if the
device gets unplugged during the flash operation.
- Fix serial port reopen logic to flag the port as forced-closed if
the reopening fails, to avoid assertion if the device gets
unplugged during the reopen operation.
- Avoid warning when signals are disconnected automatically during
last object unref.
+ SMS:
- Initialize common fields early for multipart messages, without
waiting for the last part to arrive.
+ 3GPP:
- Report consolidated registration state as DENIED if all the other
ones are either idle or unknown.
+ udev:
- Updated ID_MM_DEVICE_IGNORE to make it really a user-usable tag,
applicable not only to TTY devices but to any kind of device
(e.g. to blacklist MBIM modems); and also applicable under any
kind of filter mode (including 'strict' mode).
+ Filter:
- Added new 'explicit blacklist' filter rule, by default enabled for
all filter modes and controlled with the
MM_FILTER_RULE_EXPLICIT_BLACKLIST envvar.
- Added new 'plugin whitelist' filter rule, enabled exclusively in
'strict' filter mode, which allows us to automatically flag for
probing those devices that are flagged with specific
plugin-selected udev tags or which have vid:pid pairs registered
as allowed in the plugins.
- Updated the 'AT-capable ttyACM' filter rule, so that we only
process and probe the serial port if the device also exposes other
ports (serial, cdc-wdm, net) that ModemManager may process. This
fix should allow us to automatically ignore Arduino devices that
wrongly report themselves as speaking AT protocol in the ttyACM
port.
+ QMI:
- Fix segfault while updating bands and the device doesn't support
the 'extended LTE band preference' TLV.
+ MBIM:
- Fix segfault while processing empty USSD responses.
+ libmm-glib:
- Properly handle NULL pointer on MMFirmwareUpdateSettings.
+ Plugins:
- sierra: added port type hints for the MC74xx family.
- telit: added port type hints for the ME910 and the EG91.
- cinterion: added port type hints for the PLS8.
- Update to version 1.10.4:
+ QMI:
- Fix assertion when cleaning up event report indications.
+ MBIM:
- Fix detecting errors in "Register State Set" responses.
+ 3GPP interface:
- Use correct finish() method to complete user registration.
+ Plugins:
- u-blox: fix segfault when UACT? returns empty band list.
- Update to version 1.10.2:
+ Carrier configuration reporting and automatic selection.
+ Manager interface:
- Fixed inhibition alloc/dealloc mixup.
+ Modem interface:
- New 'CarrierConfiguration' property that shows which is the
currently selected carrier configuration in the device, if
known.
- New automatic carrier configuration selection logic, based
on per-device or per-vendor mapping.
+ Messaging interface:
- Flush SMS list update before notifying added/removed signals.
+ SMS:
- Fixed sending binary PDUs via AT commands when other AT command
operations are scheduled at the same time.
+ QMI:
- Increased the number of open retries from 10 to 20, required
e.g. for the Telit LM940/960 modems.
- Implemented QMI PDC based carrier config loading and automatic
switching.
+ Plugins:
- dell: added port type hints for the DW5820e.
- dell: use QMI DMS extension method to load properly formatted
firmware version strings.
- quectel: added port type hints for the EG06.
- ublox: added alternative port type hints for the LISA/SARA-U2.
- telit: added support for MBIM-based telit modems.
+ mmcli:
- Updated --monitor-state to report modem removal.
+ Several memory leak fixes in different modules.
- Run testsuite
* Sun Mar 17 2019 Jan Engelhardt <jengelh@inai.de>
- Reduce %systemd_requires to %systemd_ordering:
%service_* can handle its absence.
- Rewrite summaries not to rely on em dash grammar.
- Do build without requiring bash-completion.
* Sat Jan 26 2019 bjorn.lie@gmail.com
- Update to version 1.10.0:
+ udev:
- Consolidated common tag names among all the supported
plugins. E.g. ID_MM_PORT_TYPE_GPS, ID_MM_PORT_TYPE_AT_*,
ID_MM_PORT_TYPE_QCDM... All these generic tags are included
as symbols in the API, and compatibility will be maintained
for these. Custom setups of ModemManager relying on
previously available per-plugin udev tags may need to
manually port them to this new generic subset.
- New tag to allow specifying flow control settings to use in
serial ports.
+ Core:
- Avoid probing other protocols on TTYs tagged in udev with
specific port type tags (e.g. avoid probing QCDM if a port is
tagged as AT). This allows faster port probing and modem
detection for known modem layouts.
- Implemented support to enable and handle +CGEV URCs for
asynchronous connection state updates in AT-controlled
devices.
+ Manager interface:
- New runtime daemon version reporting.
- New support for requesting device inhibition, e.g. so that
ModemManager stops completely using a modem device until the
inhibition is released. This feature is implemented to allow
fwupd taking over of a device completely for as long as it
needs during a firmware update.
+ Modem interface:
- All methods are always connected, even in Failed state.
- Allow parallel Enable()/Disable() calls.
- Deprecated redundant ListBearers() method, the read-only
Bearers property is already showing the same information.
+ Bearer interface:
- New 'BearerType' property, e.g. to specify whether a bearer
is the initial LTE default bearer or not.
- Deprecated 'number' field in bearer settings. Applications do
not need to send the 'number' field in Bearer.Connect() or in
Modem.Simple.Connect(), as the setting is totally ignored.
+ mmcli:
- New 'key-value' output, easier to parse by scripts than the
default.
- Removed redundant '--location-get-XXX' actions, as the
'--location-get' already reports the location information for
all sources.
- Removed redundant '--simple-status' action, as the same
information can be obtained through different mmcli
operations.
- New manager '--inhibit-device' action and modem-specific
'--inhibit', to allow requesting device inhibition.
+ 3GPP interface:
- New support for exposing the network reported Protocol
Configuration Options (PCO), to be used instead of the new
deprecated Subscription State property.
- New support for exposing the initial LTE default bearer
status.
- New support for configuring the initial LTE default bearer
settings.
+ Location interface:
- New LTE Tracking Area Code (TAC) in 3GPP location
information.
- New support for injecting assistance data (e.g. Qualcomm
XTRA) into the GNSS engine, useful when there is no mobile
connection to use MSA A-GPS.
+ Firmware interface:
- Support for reporting firmware update support properties,
e.g. specifying which update methods are supported. This
information will be consumed by fwupd in order to allow
upgrading firmware in devices managed by ModemManager.
+ Voice interface:
- Multiple improvements and fixes in the voice call management
logic implemented with generic AT commands.
- Added AudioPort and AudioFormat properties to the Call
object.
- Added new generic audio channel setup/cleanup handlers in the
Call object.
+ QMI:
- New LOC service based GNSS support, including A-GPS setup via
SUPL server.
- New support for the "extended" LTE band list.
- New support for reading IMSI and ICCID with the UIM service.
+ MBIM:
- Implemented support for processing Protocol Configuration
Options using Microsoft-defined Basic Connect Extensions.
- Implemented support for LTE attach status and configuration
using Microsoft-defined Basic Connect Extensions.
- Implemented support for the extended signal interface and for
3GPP location details using the AT&T specific service.
- Implemented support for 3GPP USSD operations using the
standard USSD service.
- For Qualcomm-based MBIM devices, those with QMI-over-MBIM
support, a whole new set of features is now available,
including: QMI LOC/PDS location support, allowed/preferred
mode management, frequency band selection, power management
operations...
+ Plugins:
- xmm: new XMM plugin, with shared logic (allowed/preferred
mode management, frequency band selection, power management
operations, extended signal quality reporting, GPS/A-GPS...)
for Intel XMM based devices.
- fibocom: new plugin, with support for generic MBIM and
XMM-based devices.
- dell: added support for XMM-based devices, like the DW5820e.
- dell: added custom support for the DW5821e, including
'unmanaged' GPS and firmware update integration details.
- cinterion: new shared interface to include all logic shared
between Option and Option/HSO devices.
- sierra-legacy: implemented connection monitoring support.
- u-blox: added support for extended call state transitions.
- u-blox: added CDC-ECM support for SARA/LISA-U2xx modems.
- altair-lte: migrated from SubscriptionState to PCO.
- Changes from version 1.8.0:
+ New 'filter policy' setting in the ModemManager daemon to
decide which ports are probed and how. Currently these levels
are defined:
- WHITELIST-ONLY: Only devices or ports explicitly whitelisted
with the new 'ID_MM_DEVICE_PROCESS' udev tag are probed.
- DEFAULT: All ports are allowed to be probed except for the
ones explicitly greylisted as RS232 adapters or completely
blacklisted. This is the default approach that was used until
now, and the default as well in this release if a different
one isn't requested.
- STRICT: The daemon defines a set of heuristics to try to
detect modems and ports to probe. Only the TTY ports that are
very very likely to be modem ports are probed, therefore
completely avoiding the need of having a separate blacklist
or RS232 adapter greylist. But note that this policy may end
up ignoring some devices, like TTY controlled modems without
an associated network port.
- PARANOID: This is equivalent to running the STRICT mode but
also applying the blacklist and RS232 greylist filters
explicitly.
+ Device 'naming'. This release includes logic to allow 'naming'
devices with the ID_MM_PHYSDEV_UID udev tag, so that the names
can then be used in e.g. mmcli and also exposed in the 'Device'
property in the Modem interface. This new setup makes it
possible to give the devices unique names that are kept across
reboots.
+ Allow skipping the automatic scan for devices in the daemon
with the new '--no-auto-scan' daemon option. Instead, the
daemon may be called with the '--initial-kernel-events=[PATH]'
option including a predefined list of ports or otherwise get
the port additions reported during runtime with the mmcli
- -report-kernel-event=[] command.
+ Allow building and running without 'udev'. In this setup, the
previously explained '--no-auto-scan' is enabled by default, so
ports are not automatically detected .Note that this setup is
not suggested for standard distributions: if udev is available
in the system, it is the preferred method to manage the port
addition and removal.
+ SIM hot swap. The core includes the needed logic to support SIM
hot swap in the different devices, although for now it's only
tested for Telit and MBIM modems. If a SIM hot swap is
detected, the modem is flagged as failed and reprobed from
scratch.
+ Connection status monitoring logic. In order to try to detect
network initiated disconnections, a generic setup is provided
to plugins so that they can implement explicit connection
status checks that would be executed periodically.
+ New support for 3GPP CSFB states and operation modes. We now
support registration states reported as "SMS only" or "CSFB not
preferred", and provide APIs to set and get the "UE mode of
operation for EPS".
+ Build and system:
- Updated the systemd service file with additional security
related rules.
- Added support for systemd journal logging.
- Updated most of the code to use GTask instead of the
deprecated GSimpleAsyncResult based operations.
- ChangeLog is built from git during the dist tarball
generation.
+ API:
- Defined additional GSM, UMTS and LTE frequency bands.
- The MMModemBand enumeration values (EUTRAN, UTRAN and CDMA)
have been renamed to consolidate how they are defined. A
compatibility layer has been provided to avoid breaking the
API.
- New 'HardwareRevision' property in the Modem interface.
- New 'EpsUeModeOperation' property and 'SetEpsUeModeOperation'
method in the Modem 3GPP interface.
+ Core:
- Updated libqcdm to load signal strength from QCDM EVDO Pilot
Sets.
- Updated udev rules with new per-vendor rules for quicker
processing.
- Explicitly ignored ports are never probed now, but they will
be reported as owned by the device and exposed in the Ports
property.
- New 'ID_MM_TTY_BAUDRATE' udev tag to specify the baudrate to
use in RS232 TTY ports.
- If using UCS2, still assume that the operator name may be
given in ASCII.
- Explicitly open QCDM ports anytime it's needed, instead of
assuming they are open when enabled.
- Query supported ME event reporting options and automatically
set the best choice based on the supported ones.
- Query supported flow control modems and automatically set the
best choice based on the supported ones.
- Explicitly configure flow control settings on the TTY as soon
as it is connected, only applicable for RS232 devices.
- Implemented generic unlock retries loading.
+ MBIM:
- Explicitly reprobe the modem when the mbim-proxy is detected
dead.
- Workaround implemented to keep track of the PIN1 unlock
retries as the protocol isn't very good allowing this.
- Load and expose HW revision.
+ QMI:
- Explicitly reprobe the modem when the qmi-proxy is detected
dead.
- Load and expose HW revision.
- Detect port closed and forbid client allocation operations.
- New optional connection status monitoring support, enabled by
default for the Netgear AC341U.
+ Location interface: Disabled by default for MBIM modems.
+ Messaging interface: Try decoding with UTF-16BE when UCS-2
reported.
+ Plugins:
- u-blox: new plugin, currently supporting the TOBY-L2,
TOBY-L4, TOBY-R2, LARA-R2 and LISA-R2.
- quectel: new plugin, supporting generic AT/QMI based modems.
- cinterion: implemented support for devices exposing a WWAN
network interface.
- cinterion: support changing modes in LTE capable devices.
- cinterion: added GPS support for devices controlled only with
AT^SGPSC.
- cinterion: use ^SIND unsolicited messages for access tech
reporting.
- huawei: implemented Signal interface.
- telit: added support for RS232, QMI and MBIM modems.
- novatel: cleaned up registration state and access tech
reporting.
- novatel-lte: implemented unlock retries loading.
- dell: speed probing time up and reduce udev dependency.
- mbm: added GPS support for the Dell DW5560.
+ Updated translations.
- Drop intltool BuildRequires, no longer needed.
- Pass --with-systemd-journal to configure, ensure we use the new
journald support for logging.
* Mon Jul 30 2018 bjorn.lie@gmail.com
- Update to version 1.6.14:
+ Build: Avoid -Wincompatible-pointer-types for MM 1.6.x builds,
to skip the stricter checks in GObject.
+ Introspection:
- Fixed bearer list annotations.
- Explicitly use ModemManager prefix to refer to introspected
types.
+ Core:
- udev: add tags also on bind actions.
- 3GPP: don't force auto registration if already registered.
- Signal: fix reloading of detailed signal quality status on AT
modems.
+ Plugins:
- QMI: update EPS registration state for LTE modems.
- MBIM:
. Check if IP session is active before trying to deactivate
it.
. Increase deactivation timeout to 60s.
- Huawei: Handle optional 0x prefix on hex numbers in ^DHCP
response.
+ Several other minor fixes.
* Wed Feb 28 2018 dimstar@opensuse.org
- Modernize spec-file by calling spec-cleaner
* Thu Jan 11 2018 zaitor@opensuse.org
- Update to version 1.6.12:
+ Blacklist:
- Ignored Pycom devices.
- Added Microchip's VID to the greylist.
+ QMI:
- Fixed connection state machine when built against libqmi <
1.18.
- Fixed connection state machine when an error is reported
setting up WDS indications.
- Changes from version 1.6.10:
+ Blacklist:
- Ignored Silicon Labs USB Zigbee dongles.
- Ignored Garmin ANT+ sticks.
- Ignored Intel coredump downloader device.
+ QMI:
- Fixed potential user-after-free issues.
- Fixed missing handler cleanups on network-initiated
disconnects.
+ MBIM:
- Fix invalid session_id and nw_error reads.
- Avoid calling mbim_message_unref() on NULL message.
- Fixed invalid object access due to handlers not being removed
correctly.
- Ensure session is disconnected before trying to connect.
- Fixed t crash when modem doesn't send gateways.
+ udev:
- Removed default ID_MM_PLATFORM_DRIVER_PROBE whitelist.
Devices exposed via the 'atmel_usart' driver aren't probed
automatically any more.
+ Core:
- Fixed running init sequence after port flashing in
disconnection.
- Fixed "forbidden product strings" check in plugins.
- Fixed multiple memory leaks and invalid memory read/writes.
- Fixed multiple async operation completions in event handlers.
- Fixed multiple potential NULL dereferences.
- Fixed deadlock when trying to disconnect cancellable.
- Fixed reporting TX/RX stats (numbers were swapped).
- Ignored USB interface removal events.
+ libmm-glib: Fix NULL dereference on firmware unique_id checks.
+ polkit: Added missing Location interface method rules.
+ Plugins:
- MBM: set data port for Dell DW5560.
- Simtech: fix error reporting in 3gpp unsolicited events
enabling.
- Fixed multiple memory leaks.
+ systemd: Drop After=syslog.target rule.
- Drop post(un) handling of icon_theme_cache_post(un), no longer
needed, file-triggers takes care of this now.
- Drop ModemManager-1.0.0-systemd-activation.patch: No longer
needed.
* Thu Nov 09 2017 sckang@suse.com
- Avoid using "systemctl enable" in spec file (bsc#1038402).
* Mon Jul 17 2017 zaitor@opensuse.org
- Update to version 1.6.8:
+ Blacklist: Ignored default Linux USB Serial Gadget.
+ QMI:
- Fixed build with libqmi 1.16.
- Allow prefix match for modem images ending with '?'.
+ Plugins:
- Telit: fix #PSNT values interpretation for HSDPA and LTE
modems.
- Telit: add LTE access technology reporting.
- Huawei: let the E3372 run NDISDUP via TTY.
- MBM: fix async method completion enabling unsolicited events.
+ Core:
- AT+WS46=? response parser extended to support ranges.
- Fix setting up signal quality retrieval logic.
- Changes from version 1.6.6:
+ Blacklist:
- Ignored keyboard.io devices.
- Ignored Analog Devices EVAL-ADXL362Z-DB.
- Ignored promotion boards from Renesas.
- Ignored Analog PlutoSDR.
- Ignored Telit LE866 flashing device.
+ Plugins:
- Telit: fix AT+SERVICE 3GPP2 access technology reporting.
- Telit: lock/unlock CSIM operations by default.
- Telit: don't ignore AT ports without an explicit port type
hint tag.
- Cinterion: improve ^SMONG and ^SCFG=? response parsers.
- Huawei: implement Signal interface based on ^HCSQ.
- QMI: require FCC auth if InvalidTransition error is detected.
- QMI: fix incorrect use of mm_base_bearer_get_status().
- QMI: add WDS event reporting support.
- MBIM: remove parent access tech loading.
+ Core:
- Added RSCP item in the Signal interface.
- Implement Signal interface in the generic AT based modem
based on ^CESQ.
- Improve network registration checks for LTE devices.
- Handle SDIO devices.
- Fix QCDM access tech reporting for WCDMA system modes.
- Fix capabilities in 4G-only devices.
- Set TTY as connected as soon as ATD replies.
+ And some other fixes.
* Sun Feb 26 2017 mailaender@opensuse.org
- Update to version 1.6.4:
+ Blacklist:
- Ignored new Infineon flashloader devices.
- Ignored Sigma Sport docking stations.
+ Core:
- USSD: don't rely on lock status to allow actions.
- 3GPP: always use 300s by default in the network scan
operation.
- Build: limit the available glib functionality to the version
supported.
+ Plugins:
- telit: add support for the Telit GE910.
- zte: fix SUBSYSTEMS and ATTRS{idVendor} checks.
+ Other minor fixes.
* Mon Jan 02 2017 mpluskal@suse.com
- Recommend libmbim (boo#1017734)
* Fri Dec 09 2016 dimstar@opensuse.org
- Drop pkgconfig(libsystemd-login): Even though configure checks
for it, pkgconfig(libsystemd) is actually enough to enable the
needed features (resume support). libsystemd-login no longer
exists with systemd v232.
* Tue Nov 01 2016 zaitor@opensuse.org
- Drop obsolete automake BuildRequires: Leftover from past patches.
* Fri Oct 14 2016 zaitor@opensuse.org
- Update to version 1.6.2:
+ Huawei: Fix setting up unsolicited voice messages.
+ Blacklist: ignored u-blox GPS/GLOSNASS USB dongle and some new
Arduinos.
+ ZTE: avoid making udev rules tty-only.
+ Some other minor fixes.
- Drop ModemManager-core-use-MM-specific-logging-methods.patch:
Fixed upstream.
* Thu Oct 13 2016 hpj@urpla.net
- Add explicit pkgconfig(libsystemd) and
pkgconfig(libsystemd-login) BuildRequires: Align with what
configure looks for. These are needed for the new suspend/resume
detection that arrived in 1.6.0.
* Fri Aug 26 2016 sckang@suse.com
- Drop
bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch:
No longer needed.
* Thu Aug 18 2016 zaitor@opensuse.org
- Add ModemManager-core-use-MM-specific-logging-methods.patch:core:
use MM-specific logging methods always instead of the generic
GLib ones. Patch from upstream stable git.
* Mon Aug 15 2016 bruno@ioda-net.ch
- Update to version 1.6.0 (boo#975211):
+ New features:
- Core:
. Implemented support for suspend/resume detection, currently
working when systemd is in use. Whenever the system is
suspended, we'll flag the modems as invalid so that they
are re-probed from scratch when the system is resumed.
. Added cancellation support for the probing operations.
. Reworked and simplified the serial port response
processing.
- Location interface:
. Added A-GPS support, currently available only for QMI based
modems with PDS service.
. Added support for updating the default GPS refresh time.
- Time interface: New default implementation for all AT-based
modems.
- Voice interface: New DBus interface to allow the management
of voice calls, which currently assumes that the audio
channel is setup out of ModemManager.
- Bearer: New support for reporting statistics of the ongoing
connection with a new 'Stats' property, currently available
for QMI and MBIM based modems.
- QMI:
. Implemented support for devices which only work in "raw IP"
mode, like the Sierra MC7455.
. Implemented support for SIM related operations using the
UIM service, as newer modems with multi-SIM capabilities
don't support the legacy DMS UIM operations.
. Implemented support for detecting network-initiated
disconnections.
- MBIM: If online mode fails, try to use the 'DMS Set FCC
Authentication' QMI
- udev: Added new supported 'ID_MM_PORT_IGNORE' tag to allow
fully ignoring ports specified by the user.
- mmcli:
. Added command completion.
. Added new operations to use the Voice interface.
- Build: Added code coverage support.
- Plugins:
. haier: new plugin to support the Haier CE81B.
. thuraya: new plugin for Thuraya satellite modems.
. sierra-legacy,sierra: the implementation for Sierra modems
is now split into two different plugins: a 'legacy' one for
the old PPP and DirectIP based modems and the standard one
for the newer QMI and MBIM based ones.
. dell: new plugin for Dell rebranded devices from Novatel,
Sierra or Ericsson.
. gobi: removed the plugin. All non-vendor specific QMI
devices should now be managed by the generic plugin.
. mbm: dynamically load the list of supported modes.
. mbm: fixed several connection/disconnection issues.
. simtech: support QMI devices.
. huawei: implemented Voice call management support.
. huawei: use static IP addressing in NDISDUP capable devices
if the AT^DHCP response provides the IP details.
+ Existing features backported to 1.4.x releases also present in
in ModemManager 1.6.0:
- MBIM:
. The mbim-proxy is used by default.
. Implemented support for disconnection status notification
while connected.
. Disabled CDMA capabilities, until properly supported.
- QMI:
. The qmi-proxy is used by default.
. If online mode fails, use 'DMS Set FCC Authentication',
required by some rebranded Sierra modems (e.g. Dell branded
ones).
. Implemented support for loading SIM operator id and name.
. Implemented power-cycle reset functionality.
- Plugins:
. telit:
. added support for new devices, like HE910, UE910 and
. implemented dynamic port identification.
. implemented unlock retries loading.
. implemented supported/current bands management.
. implemented supported/current modes management.
. implemented modem reset and power down.
. mbm: implemented GPS support for Ericsson HS2350 and
H5321gw modems.
- Drop upstream fixed patches:
+ ModemManager-cinterion_drop_unused_constants.patch.
+ ModemManager-novatel_remove_unused_custom_AT_probe_array.patch.
+ ModemManager-wmc_fix_typo.patch.
+ ModemManager-fix-whitespaces.patch.
- Added nmcli-bash-completion package.
- Need last version of polkit-default-priv (bsc#976945).
- build '--with-suspend-resume=systemd' argument.
* Mon May 23 2016 dimstar@opensuse.org
- Add three more patches from upstream to fix build with gcc6:
+ ModemManager-cinterion_drop_unused_constants.patch.
+ ModemManager-novatel_remove_unused_custom_AT_probe_array.patch.
+ ModemManager-wmc_fix_typo.patch.
* Mon May 23 2016 dimstar@opensuse.org
- Add ModemManager-fix-whitespaces.patch: Fix whitespace usage.
While building with GCC 6, the indenting is taken as a warning
for the user likely making a mistake.
* Thu Apr 14 2016 mgorse@suse.com
- Update to GNOME 3.20 Fate#318572
- Rebased
bnc878066-serial-ports-on-the-IO-card-are-not-responding.patch.
* Mon Apr 11 2016 dimstar@opensuse.org
- Update to version 1.4.14:
+ Core:
- Improved several AT response parsers (+CREG, +CGDCONT,
+CPMS...).
- Explicitly disconnect bearer before removing it.
+ 3GPP: allow LAC/CID updates while registering.
+ QMI:
- Don't assume LAC/CID updates are always given in system
indications.
- Don't add APN auth settings if user/pass not given.
- Load SIM operator id and name with "NAS home network"
- Power-cycle reset functionality implemented.
+ Telit:
- Added udev rules for Telite LE910 V2.
- Implemented modem reset & power down.
- Implemented unlock retries loading.
- Implemented supported/current bands loading/setting.
- Implemented supported/current modes loading/setting.
- Ignored proxmark3.
+ Some other minor fixes.
* Mon Nov 02 2015 zaitor@opensuse.org
- Update to version 1.4.12:
+ MBM:
- Implemented GPS support for Ericsson modems.
- Enabled GPS port for H5321gw and HS2350.
+ Telit:
- Added udev rules for HE910/UE910/UL865.
- Implemented dynamic port identification.
+ QMI:
- Expose IP config details in bearer object even if DHCP is
requested.
- Retrieve MM_MODEM_3GPP_FACILITY_SIM.
+ MBIM: CDMA capabilities disabled by default (not yet
supported).
+ libmm-glib:
- If empty path (/) given, no SIM object will be created.
- Added missing introspection annotations to disconnect().
+ Core:
- Don't check the cache when explicitly asking for required
unlocks.
- Initialize SMS messaging support also in the secondary port.
- New +CGMR parser which covers the Telit HE910 specific
format.
- New AT-based generic implementation for the Time interface.
- Fix reporting DENIED state in 3GPP modems.
+ Policy: remove rule which was preventing us from receiving
signals.
+ Blacklist: ignored MediaTek preloader.
+ Misc. other minor fixes
* Thu Aug 06 2015 dimstar@opensuse.org
- Add explicit pkgconfig(udev) BuildRequires: we need it to define
%{_udevdir}.
* Fri Jul 24 2015 jweberhofer@weberhofer.at
- Update to version 1.4.10:
+ QMI: retry unlock check on 'UimUninitialized' errors.
+ QMI: fix '0' prefixed IMEI/ESN/MEID.
+ Huawei: fix secondary port unsolicited message handling.
+ Huawei: ignore ^POSEND and ^POSITION unsolicited messages.
+ Blacklist: ignore devices from Posnet Polska S.A.
+ Blacklist: ignore Palm M5xx devices.
- Cleaned up spec
* Thu Apr 23 2015 zaitor@opensuse.org
- Update to version 1.4.8:
+ Build: avoid building DBus tests with GLib 2.32.
+ ZTE: support MF700.
+ Huawei: extend ^NDISSTATQRY parser with new response formats.
+ Blacklist: ignore devices from Access Interface Solutions.
+ Core: added ModemManager --version action.
+ Some other minor fixes.
- Changes from version 1.4.6:
+ MBIM: by default use the new mbim-proxy setup.
+ Telit: new support for HE910, UE910 and UL865.
+ Location: avoid printing location info in syslog with info
level.
+ Greylist: add Cypress USB<->RS232 adapters
+ QMI: avoid unref-ing arrays owned by the output bundles.
+ Some other minor fixes.
- Changes from version 1.4.4:
+ Use 'DMS Set FCC Authentication' if online mode fails in QMI
modems. This change requires bumping the libqmi version to
1.12.4, which is the stable release including the change.
+ Fix segfault when empty pdp type string is given.
+ Fix segfault when port driver is unknown.
+ Blacklist: ignore PalmOS devices driven by 'visor'
* Mon Feb 09 2015 zaitor@opensuse.org
- Update to version 1.4.2:
+ MBIM:
- Update to handle 'Function Error' responses as per libmbim
1.12.
- Handle network-notified connection status messages.
+ Bluetooth: Keep track of devices as they are move across sysfs.
+ Core: case insensitive matches in the APN list.
+ ZTE: avoid using QMI in the MF60.
+ Huawei: updated port type hint strings.
+ Icera:
- Fix no IPv6 report response.
- Retry Icera probing several times.
+ Altair: increase AT probe command timeout.
+ Some other minor fixes.
* Mon Oct 20 2014 dimstar@opensuse.org
- Update to version 1.4.0:
+ This version comes with the following updates in the
interfaces:
- Updated the logic around the IP configuration properties in
the Bearer:
. Setting DHCP as IP method in the IPv6 settings means that
SLAAC should be used to retrieve correct addressing and
routing details.
. DHCP IP method may now be combined with an explicit static
IP address, as IPv6 SLAAC may require the link-local
address to be present.
. MTU is now also included in the IP configuration
properties, if specified by the modem, and applicable to
both DHCP and STATIC methods.
- New 'OFF' power state, which fully switches off the modem
device. After setting the modem in this state, no further use
of it can be done. Currently available in Wavecom and
Cinterion.
- Location interface: new 'unmanaged GPS' support, which allows
to start/stop the GPS module in the modem, while leaving the
location information retrieval to other processes. Currently
available in modems with independent GPS TTYs, like
Option/HSO, Cinterion and Huawei.
- New Test DBus interface: not to be installed, just for
internal system tests.
+ Other notable changes include:
- MBIM: support for ZTE and Sequans Communications modems.
- Ericsson MBM: Support for AT-capable /dev/cdc-wdm ports.
- Huawei: improved support for Network time retrieval.
- Huawei: implemented GPS support.
- Huawei: support for /dev/cdc-wdm AT ports via the new
huawei-cdc-ncm driver.
- Cinterion: implemented GPS support.
- Cinterion: implemented unlock retries loading.
- Cinterion: gather port types for multi-tty devices.
- Cinterion: custom wait for SIM readiness after SIM-PIN
unlock.
- Wavecom: custom wait for SIM readiness after SIM-PIN unlock.
- Probing: new flag to identify hotplugged devices which don't
need full reset.
- Tests: internal refactor of the ports handling code, allowing
test-driven virtual ports and system tests run during
'make check'. This new feature also comes with a new internal
'Test' DBus interface, as well as new --test-[*] options in
the ModemManager program.
- and many more fixes...
- Changes from version 1.2.0:
+ Signal interface: new interface for extended signal quality
information.
+ OMA interface: new interface to expose the Device Management
capabilities defined by the Open Mobile Alliance.
+ Messaging interface: new 'Messages' property.
+ Modem interface: new 'Bearers' property.
+ 3GPP interface: new 'SubscriptionState' property.
+ Other notable changes include:
- QMI: Implemented Manual CDMA activation logic.
- QMI: Implemented 3GPP2/CDMA SMS support.
- QMI: Added support for QMI modems in the ZTE, x22x and
Cinterion plugins.
- Huawei: multiple improvements and fixes for the ^NDISDUP
support.
- Huawei: new mode/switching logic with ^SYSCFGEX for
LTE-capable devices.
- Altair-LTE: set subscription state based on PCO.
- MediaTek: new 'mtk' plugin added for MediaTek devices.
- libmm-glib: Added GObject Introspection and Vala support.
- and many more fixes...
- Add gobject-introspection-devel and vala BuildRequires: new build
dependencies.
- Split new subpackage typelib-1_0-ModemManager-1_0.
- Add rcModemManager symlink.
/usr/lib64/libmm-glib.so.0 /usr/lib64/libmm-glib.so.0.5.0
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 11:45:28 2024