Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
Name: hostap-utils | Distribution: openSUSE Leap 16.0 |
Version: 0.4.7 | Vendor: openSUSE |
Release: lp160.1.1 | Build date: Thu Feb 22 09:00:44 2024 |
Group: Hardware/Wifi | Build host: reproducible |
Size: 138893 | Source RPM: hostap-utils-0.4.7-lp160.1.1.src.rpm |
Packager: https://bugs.opensuse.org | |
Url: http://hostap.epitest.fi/ | |
Summary: Tools for Prism2 cards |
This package contains various tools for configuring Prism2 cards driven by the HostAP kernel module. In particular, it contains a utility to query and flash firmware of Prism2 adapters.
GPL-2.0+
* Thu Feb 22 2024 Dominique Leuenberger <dimstar@opensuse.org> - Use %autosetup macro. Allows to eliminate the usage of deprecated %patchN * Sun Jul 12 2015 mpluskal@suse.com - Cleanup spec file with spec-cleaner * Wed Oct 08 2014 jengelh@inai.de - Use source URLs and remove old specfile tags and sections. * Fri Sep 30 2011 uli@suse.com - cross-build fix: use %__cc macro * Sun Oct 31 2010 jengelh@medozas.de - Use %_smp_mflags * Mon Sep 22 2008 ro@suse.de - drop madwifi from buildrequires (not needed here) * Wed Mar 14 2007 jg@suse.de - split hostap-utils off into own package * Mon Sep 18 2006 jg@suse.de - hostap-utils: Fixed usage of uninitialised variable (bug 184410) - hostapd: Update to version 0.4.9, changes: * added a new configuration option, eapol_version, that can be used to set EAPOL version to 1 (default is 2) to work around broken client implementations that drop EAPOL frames which use version number 2 [Bug 89] * fixed EAP-MSCHAPv2 message length validation * fixed stdarg use in hostapd_logger(): if both stdout and syslog logging was enabled, hostapd could trigger a segmentation fault in vsyslog on some CPU -- C library combinations * Sun Feb 05 2006 ro@suse.de - use madwifi-devel in BuildRequires * Sun Feb 05 2006 aj@suse.de - Remove BuildRequires on km_wlan. * Wed Jan 25 2006 mls@suse.de - converted neededforbuild to BuildRequires * Mon Nov 21 2005 jg@suse.de - hostapd: update to 0.4.7, changes: * driver_wired: fixed EAPOL sending to optionally use PAE group address as the destination instead of supplicant MAC address * driver_madwifi: configure driver to use TKIP countermeasures in order to get correct behavior * driver_madwifi: added support for madwifi-ng - hostapd: remove obsolete madwifi patch - hostapd: updated config file - hostap-utils: update to 0.4.7 (no changes) - use %{jobs} * Tue Nov 08 2005 jg@suse.de - do not build as root * Fri Nov 04 2005 jg@suse.de - hostapd, update to 0.4.6, changes: * added support for replacing user identity from EAP with RADIUS User-Name attribute from Access-Accept message, if that is included, for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get tunneled identity into accounting messages when the RADIUS server does not support better way of doing this with Class attribute) * driver_madwifi: fixed EAPOL packet receive for configuration where ath# is part of a bridge interface * added a configuration file and log analyzer script for logwatch * fixed EAPOL state machine step function to process all state transitions before processing new events; this resolves a race condition in which EAPOL-Start message could trigger hostapd to send two EAP-Response/Identity frames to the authentication server - hostapd: added support for madwifi-ng - removed hostap-driver, is part of the kernel now * Thu Oct 13 2005 jg@suse.de - hostapd: update to 0.4.5, changes (shortened): * added client CA list to the TLS certificate request in order to make it easier for the client to select which certificate to use * added experimental support for EAP-PSK * added support for WE-19 (hostap, madwifi) * fixed PMKSA caching to copy User-Name and Class attributes so that RADIUS accounting gets correct information * start RADIUS accounting only after successful completion of WPA 4-Way Handshake if WPA-PSK is used * fixed PMKSA caching for the case where * EAP-PAX is now registered as EAP type 46 * fixed EAP-PAX MAC calculation * fixed EAP-PAX CK and ICK key derivation - hostap-driver: update to 0.4.5, changes: * added support for WE-19 - hostap-utils: update to 0.4.0 (no real changes) * Thu Sep 08 2005 jg@suse.de - fixed file permissions * Mon Aug 22 2005 jg@suse.de - hostap-driver: update to 0.4.4, changes: * added support for pcmcia changes in Linux 2.6.13 * added support for creating sysfs device files (Linux 2.6.x) * fixed power save processing for PS-Poll frames with PwrMgmt flag set (this was causing "wifi0: invalid skb->cb magic" errors) * fixed linking both hostap_cs and hostap_pci to kernel * filter out sequential disconnect events to make race condition with received EAPOL frames less likely to happen (this improves authentication success rate with some APs that send EAPOL frames very quickly after the (re)association response) * added support for setting channel mask for scan requests * Sun Aug 07 2005 ro@suse.de - fix build with current wireless drivers * Mon Jul 11 2005 jg@suse.de - hostapd: update to 0.3.9, changes: * fixed a bug which caused some RSN pre-authentication cases to use freed memory and potentially crash hostapd * fixed private key loading for cases where passphrase is not set * fixed WPA2 to add PMKSA cache entry when using integrated EAP authenticator * driver_madwifi: fixed pairwise key removal to allow WPA reauth without disassociation * fixed RADIUS attribute Class processing to only use Access-Accept packets to update Class; previously, other RADIUS authentication packets could have cleared Class attribute * fixed PMKSA caching (EAP authentication was not skipped correctly with the new state machine changes from IEEE 802.1X draft) - hostap-driver: update to 0.3.9, changes: * fixed background scans (iwlist wlan0 scan) not to break data connection when in host_roaming 2 mode * fixed beacon frame when moving from monitor mode to master mode * Wed Jun 08 2005 meissner@suse.de - adjust hostapd/Makefile to be able to correctly get passed RPM_OPT_FLAGS. * Tue Jun 07 2005 meissner@suse.de - Use RPM_OPT_FLAGS. * Fri Mar 11 2005 jg@suse.de - hostap-driver: * create sysfs links for ethernet device, not IEEE80211 device * disabled sysfs links for hostap_cs, as it breaks association * Thu Feb 24 2005 jg@suse.de - hostap-driver: fixed sysfs support * Mon Feb 14 2005 jg@suse.de - hostapd, hostap-utils, hostap-driver: update to 0.3.7 final (no real changes, just version rename) * Mon Feb 07 2005 jg@suse.de - disabled support for madwifi on non x86(-64) platforms * Mon Feb 07 2005 jg@suse.de - hostapd: update to version 0.3.7-pre, changes (shortened): * added support for configuring a forced PEAP version based on the Phase 1 identity * fixed PEAPv1 to use tunneled EAP-Success/Failure instead of EAP-TLV to terminate authentication * driver_madwifi: filter wireless events based on ifindex to allow more than one network interface to be used * added support for configuring multiple allowed EAP types for Phase 2 authentication (EAP-PEAP, EAP-TTLS) * added support for EAP-PEAP in the integrated EAP authenticator * added support for EAP-GTC in the integrated EAP authenticator * added support for configuring list of EAP methods for Phase 1 so that the integrated EAP authenticator can, e.g., use the wildcard entry for EAP-TLS and EAP-PEAP * added support for EAP-TTLS in the integrated EAP authenticator * added support for EAP-SIM in the integrated EAP authenticator * added support for using hostapd as a RADIUS authentication server with the integrated EAP authenticator taking care of EAP authentication * driver_madwifi: fixed group key setup and added get_ssid method * added support for EAP-MSCHAPv2 in the integrated EAP authenticator * added support for integrated EAP-TLS authentication * added support for reading PKCS#12 (PFX) files (as a replacement for PEM/DER) to get certificate and private key (CONFIG_PKCS12) * added support for Acct-{Input,Output}-Gigawords * added support for Event-Timestamp (in RADIUS Accounting-Requests) * added support for RADIUS Authentication Client MIB (RFC2618) * added support for RADIUS Accounting Client MIB (RFC2620) * made EAP re-authentication period configurable * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication * added support for multiple WPA pre-shared keys * added support for multiple driver interfaces to allow hostapd to be used with other drivers * added wired authenticator driver interface * added madwifi driver interface * fixed RADIUS reconnection after an error in sending interim accounting packets * added hostapd control interface for external programs * finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV (now d11) * added support for strict GTK rekeying * added Prism54 driver interface * dual-licensed hostapd (GPLv2 and BSD licenses) * added integrated EAP authenticator that can be used instead of external RADIUS authentication server - hostap-driver: update to version 0.3.7-pre, changes: * improved suspend operation: disable firmware (hostap_cs) and generate disconnect event to trigger wpa_supplicant to reassociate immediately after resume * added new ioctl command for hostapd to clear station specific accounting data when starting a new accounting session * added support for the special initialization needed for the wireless part of multi-function SanDisk ConnectPlus CF cards (manfid 0xd601, 0x0101) * fixed card enabling after firmware download in case any of the netdevs were up when the download was started * added support for Linux wireless extension v17 - hostap-utils: update to version 0.3.7-pre (no changes) - added all example configuration files * Thu Jan 13 2005 jg@suse.de - hostapd: update to version 0.2.6, changes: * fixed RADIUS accounting to generate a new session id for cases where a station reassociates without first being complete deauthenticated * fixed STA disassociation handler to mark next timeout state to deauthenticate the station, i.e., skip long wait for inactivity poll and extra disassociation, if the STA disassociates without deauthenticating * removed 'daemonize' configuration file option since it has not really been used at all for more than year - hostap-utils: update to version 0.2.6, changes: * split_combined_hex: updated to use head/tail -n argument - hostap-driver: update to version 0.2.6, changes: * added support for changed PCI API in Linux 2.6.10-rc1 and newer * Tue Nov 02 2004 jg@suse.de - hostapd: update to version 0.2.5, changes: * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication * fixed EAPOL state machine to stop if STA is removed during eapol_sm_step(); this fixes at least one segfault triggering bug with IEEE 802.11i pre-authentication * fixed an alignment issue that could cause SHA-1 to fail on some platforms (e.g., Intel ixp425 with a compiler that does not 32-bit align variables) * fixed RADIUS reconnection after an error in sending interim accounting packets - hostap-driver: update to version 0.2.5, changes: * fixed card enabling after firmware download in case any of the netdevs were up when the download was started * fixed netif_carrier_on/off() calls to leave carrier on for Master mode; previously this may have been left off in some cases which could prevent packet bridging with new kernel versions - hostap-driver: enabled support for non-volatile firmware download * Fri Oct 01 2004 jg@suse.de - fixed sysfs device/driver links (bug 46633) * Mon Aug 09 2004 jg@suse.de - fixed filelist * Fri Aug 06 2004 jg@suse.de - do not install /etc/pcmcia/hostap_cs.conf.example anymore * Thu Jul 29 2004 jg@suse.de - update hostapd to 0.2.4: * fixed some accounting cases where Accounting-Start was sent when IEEE 802.1X port was being deauthorized * modified RADIUS client to re-connect the socket in case of certain error codes that are generated when a network interface state is changes (e.g., when IP address changes or the interface is set UP) * fixed couple of cases where EAPOL state for a station was freed twice causing a segfault for hostapd * fixed couple of bugs in processing WPA deauthentication * fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM) * fixed group rekeying to send zero TSC in EAPOL-Key messages to fix cases where STAs dropped multicast frames as replay attacks * added support for copying RADIUS Attribute 'Class' from authentication messages into accounting messages * send canned EAP failure if RADIUS server sends Access-Reject without EAP message (previously, Supplicant was not notified in this case) * fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK - update hostap-utils to 0.2.4 (no changes) - update hostap-driver to 0.2.4: * fixed wlan#/wifi# interface packet counters (both are supposed to see data packets once; wlan# was counting TX twice and wifi# did not count TX or RX at all for most cases) * fixed compilation with PRISM2_NO_STATION_MODES defined * fixed MAC address changing to update address for wifi# interface (without this, at least Master mode did not work correctly when MAC address was changed for wlan#) * fixed inner-BSS bridge (ap_bridge_packets=1) not to bridge packets to unauthorized ports when IEEE 802.1X/WPA is used * merged CryptoAPI versions of WEP/TKIP/CCMP from the wireless-2.6 BitKeeper tree (not used by default, can be enabled by defining HOSTAP_USE_CRYPTO_API) * fixed a buffer overflow in TKIP encryption (hostap_crypt_tkip module) on big endian hosts * Mon May 17 2004 jg@suse.de - update hostapd to 0.2.1 (shortened): * added WPA and IEEE 802.11i/RSN (WPA2) Authenticator functionality * added support for Acct-Interim-Interval * added new hostapd.conf variable, nas_identifier, that can be used to add an optional RADIUS Attribute, NAS-Identifier, into authentication and accounting messages * added support for Accounting-On and Accounting-Off messages - update hostap-utils to 0.2.1: * hostap_rid: fixed handling of failed RID reads * fixed prism2_srec not to allow combination of volatile and non-volatile firmware images (they will corrupt the card flash) * added support for loading PRI firmware for cards without PRI * fixed volatile download of combined primary and secondary firmware to start running the secondary firmware * added support for dumping PDA in text format and overriding PDA with text and binary files (prism2_srec options -D, -P, and -O) - update hostap-driver to 0.2.1 (shortened): * allow hostapd to send encrypted frames using wlan#ap interface * added driver support for hostapd WPA Authenticator * fixed TKIP get sequence number * clear IFF_RUNNING and generate linkwatch events based on association status in Managed mode * added alternative TKIP implementation which uses Michael MIC implementation in CryptoAPI instead of Host AP specific implementation * added support for RSN (IEEE 802.11i/WPA2) * dropped support for Linux 2.2.x and old Linux 2.4.x kernels * fixed hostap_cs unregistration when PC Card is removed while Host AP interfaces are still up * restructured Linux net device use to be more like IEEE 802.1q VLAN * disable wlan hardware when radio netdev (wifi#) is down * fixed Shared Key authentication when using host_decrypt and kernel driver based IEEE 802.11 management * added crypto hooks for full MSDU encrypt/decrypt * fixed iwspy support with Linux wireless ext v16 * fixed IEEE 802.11 defragmentation when using host-based WEP decryption and bridging packets between two associated STAs * added driver support for WPA Authenticator/Supplicant * added minimal support for ethtool - fixed bug in hostap-driver Makefile which prevented hostap_cs.ko from being built * Sat Apr 03 2004 jg@suse.de - fixed sysfs support in hostap driver (bug #37278) * Tue Mar 30 2004 jg@suse.de - skipping build for UM kernels (bug #37448) - skipping build of hostap_cs in case PCMCIA is disabled in the kernel config (also bug #37448) * Tue Mar 02 2004 jg@suse.de - typo fix in makefile * Sun Feb 29 2004 jg@suse.de - update to hostapd-0.1.3, changes: * fixed event loop to call signal handlers only after returning from the real signal handler * reset sta->timeout_next after successful association to make sure that the previously registered inactivity timer will not remove the STA immediately (e.g., if STA deauthenticates and re-associates before the timer is triggered). - update to hostap-driver-0.1.3, changes: * fixed IEEE 802.11 defragmentation when using host-based WEP decryption and bridging packets between two associated STAs (this caused a kernel crash in dev_queue_xmit()) * reconfigure fragmentation threshold after Port0 enable to work around issues with some STA firmware versions forgetting the configured value * restore retry limit after card reset * update STA RX statistics also in Repeater mode * hostap_cs: fixed CS reset when the netdev is down: need to reset hardware even in this case to make resume from suspend mode work correctly * fixed error reporting from Genesis mode download * changed README to use 'make' instead of 'make pccard/pci/plx' when building the driver * replaced CardServices() calls with calls to matching pcmcia_*() functions (required for Linux 2.6.2 and newer) * fixed module reference counting of hostap_crypt_wep module for Linux 2.6.x (i.e., prevent it from be unloaded if it is still used) - update to hostap-utils-0.1.3, changes: * prism2_srec: ignore PDR 0x0413 if it is not used (this allows some of the newer STA firmware 1.8.x versions to be downloaded) * prism2_srec: fixed combined RAM download of PRI and STA firmwares to use correct start address - added driver race condition fix from hostap CVS - rewrote driver Makefile * Mon Jan 26 2004 jg@suse.de - removed kernel-source from neededforbuild * Fri Jan 09 2004 jg@suse.de - driver update to version 0.1.2, from ChangeLog * fixed RTS and Fragmentation thresholds after hw reset * fixed Managed/Ad-hoc mode authentication with Open System algorithm when using old (e.g., version 0.6.2) STA firmware * fixed iwspy support with Linux wireless ext v16 * fixed WDS interface selection to not select non-WDS interface * fixed wlan#wds#, wlan#ap, and wlan#sta netdevice unregistration * added PCI ID for Prism3 mini-PCI [hostap_pci] * fixed yield() backward compatibility code for Linux 2.4.0-18 * added support for 32-bit CommTallies (if STA f/w >= 0.8.2) * update counters used for /proc/net/hostap/wlan#/stats periodically * fixed CommTallies handling on big endian platforms * added support for Primary-only mode * fixed failure handling in PCI probe not to crash kernel [hostap_pci] * merged hostap_crypt module into hostap module * fixed inactivity polling of stations that are in power saving mode - utils update to version 0.1.2, from ChangeLog * fixed prism2_srec not to allow combination of volatile and non-volatile firmware images (they will corrupt the card flash) * reduced verbosity of prism2_srec * added support for volatile download of Primary firmware using Genesis mode (this is available only for hfa3842; hfa3841, i.e., old Prism2 cards, require hardware changes for similar function) ('-g' command line option in prism2_srec) * added support for merging two srec file (Primary and Secondary(STA) firmware) into one non-volatile (flash) download - hostapd update to version 0.1.0 * Mon Sep 08 2003 agruen@suse.de - km_hostap-HZ.diff: Adapt to dynamic-hz kernel patch. * Mon Jul 28 2003 jg@suse.de - update to version 0.0.4, from ChangeLog (shortened) * moved non-hardware specific RX code from hostap_hw.c into a new file, hostap_80211_rx.c and removed Prism2 RX descriptor dependency from hostap_ap.c * fixed number of compilation issues (RH9 kernel, *.mod files to local directory, 2.4.x compilation with CONFIG_MODVERSIONS, external pcmcia-cs) * removed extra tasklet that was used with TX callback handler * update basic rate set automaticallyt when changing supported rate set * fixed compilation without Linux Wireless Extensions * use less aggressive transmit rate decreasing algorithm * fixed inactivity expiration of stations using power saving mode * fixed sending of IEEE 802.1X frames to buffer them if STA is in power saving mode * removed backward compatibility code for Linux Wireless Extensions versions older than ver 9 * added module parameter 'dev_template' for setting the device name template (default: 'wlan%d'); this is for hostap_{cs,pci,plx}.o * changed monitor mode to use pseudo-IBSS mode instead of Host AP mode to avoid sending out Beacon and ProbeResp frames * fixed enh_sec setting (hide SSID) to reset Port0 so that the changes to the beacon are taken into use immediately * added support for selection which authentication algorithm to use in station mode * added support for manual scan and roaming mode (managed/ad-hoc); * process beacon frames in kernel driver even when hostapd is used * removed TX power controlling (iwconfig txpower) * Tue Jun 17 2003 jg@suse.de - added directory /usr/src/kernel-modules to filelist * Wed Jun 04 2003 jg@suse.de - Initial package
/usr/sbin/hostap_crypt_conf /usr/sbin/hostap_diag /usr/sbin/hostap_io_debug /usr/sbin/hostap_rid /usr/sbin/prism2_param /usr/sbin/prism2_srec /usr/sbin/split_combined_hex /usr/share/doc/packages/hostap-utils /usr/share/doc/packages/hostap-utils/ChangeLog /usr/share/doc/packages/hostap-utils/README
Generated by rpm2html 1.8.1
Fabrice Bellet, Mon Dec 2 23:39:05 2024