| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libproxy1-networkmanager | Distribution: SUSE Linux Enterprise 15 |
| Version: 0.4.17 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: 150400.1.21 | Build date: Sun May 8 13:54:02 2022 |
| Group: System/Libraries | Build host: sheep01 |
| Size: 10632 | Source RPM: libproxy-plugins-0.4.17-150400.1.21.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: http://libproxy.github.io/libproxy/ | |
| Summary: Libproxy module for NetworkManager configuration | |
A module to extend libproxy with capabilities to query NetworkManager about network configuration changes.
GPL-2.0-or-later AND LGPL-2.1-or-later
* Tue Jul 13 2021 dimstar@opensuse.org
- Do no longer BuildRequire libmodman-devel: libproxy 0.4.17 was
changed upstream to only support to internal version (no other
consumer of libmodman exists).
- No longer pass -DFORCE_SYSTEM_LIBMODMAN=ON to cmake: not
understood anymore (boo#1188265).
* Tue Dec 29 2020 dimstar@opensuse.org
- Update to version 0.4.17:
+ python bindings: fix "TypeError: argtypes must be a sequence of
types".
- Drop 147.patch: fixed upstream.
* Mon Dec 14 2020 dimstar@opensuse.org
- Add 147.patch: python bindings: fix "TypeError: _argtypes_ must
be a sequence of types".
* Fri Dec 04 2020 dimstar@opensuse.org
- Update to version 0.4.16:
+ Port to, and require, SpiderMonkey 6.
+ Use closesocket() instead of close() on Windows.
+ Add symbol versions - be ready to introduce new APIs as needed.
+ Add public px_proxy_factory_free_proxies function.
+ Add PacRunner config backend (largely untested; feedback
welcome!).
+ Small performance improvements.
+ pxgsettings: use the correct syntax to connect to the changed
signal (silences annoying output on console).
+ Support python3 up to version 3.9.
+ Fix buffer overflow when PAC is enabled (CVE-2020-26154).
+ Rewrite url::recvline to be nonrecursive (CVE-2020-25219).
+ Remove nonfunctional and crashy pacrunner caching.
+ Never use system libmodman (no other consumers, not
maintained).
- Drop upstream merged patches:
+ libproxy-python3.7.patch
+ libproxy-pxgsettings.patch
+ libproxy-CVE-2020-25219.patch
libproxy-fix-pac-buffer-overflow.patch
- Create new sub-package libproxy1-config-pacrunner.
* Wed Sep 30 2020 mgorse@suse.com
- Add libproxy-CVE-2020-25219.patch: Rewrite url::recvline to be
nonrecursive (boo#1176410 CVE-2020-25219).
- Add libproxy-fix-pac-buffer-overflow.patch: fix buffer overflow
when PAC is enabled (boo#1177143 CVE-2020-26154).
* Mon Sep 14 2020 yfjiang@suse.com
- Build with KDE on Tumbleweed, Leap and SLE releases greater than
SLE-15-SP2 (jsc#SLE-12256).
* Mon Apr 27 2020 dimstar@opensuse.org
- Add libproxy-pxgsettings.patch: pxgsettings: use the correct
syntax to connect to the changed signal.
* Thu Mar 12 2020 tchvatal@suse.com
- Remove few SLE11 conditions
- Fix build without python2 available
* Wed Dec 12 2018 dimstar@opensuse.org
- Convert package from multispec to multibuild.
* Fri Oct 05 2018 dimstar@opensuse.org
- Update Url tag to point to http://libproxy.github.io/libproxy/
- Add libproxy-python3.7.patch: Support python 3.7 and 3.8.
- Drop py_requires: no longer needed.
* Sat Jul 07 2018 bjorn.lie@gmail.com
- Drop favor_gtk2 conditional.
* Thu Feb 22 2018 fvogt@suse.com
- Use %license (boo#1082318)
* Thu Sep 07 2017 jengelh@inai.de
- Update descriptions and RPM categories.
* Thu May 11 2017 dimstar@opensuse.org
- Update to version 0.4.15:
+ Port to, and require, SpiderMonkey 38.
+ Fix "NetworkManager plugin not being built"
(gh#libproxy/libproxy#53).
+ Fix "networkmanager plugin not working
(gh#libproxy/libproxy#58).
+ Fix "Invalid read after free" (gh#libproxy/libproxy#59).
+ Fix intermittent unit test failures.
- Replace pkgconfig(mozjs185) buildRequires with
pkgconfig(mozjs-38), following upstream.
* Mon Feb 06 2017 dimstar@opensuse.org
- Have libproxy1-config-kde require libqt5-qtpaths instead of
libqt5-qttools on openSUSE > 13.2 / openSUSE > Leap 42.x
(boo#988808).
* Mon Jan 09 2017 dimstar@opensuse.org
- Update to version 0.4.14:
+ Parallel build support for python2 and python3.
- DWITH_PYTHON has been replaced with -DWITH_PYTHON2 and
- DWITH_PYTHON3 to have full control over this. Default is
ON for both (gh#libproxy/libproxy#22).
+ Minor fixes to the PAC retriever code
(gh#libproxy/libproxy#40).
+ Fallback to mcs instead of gmcs for the mono bindings
(gh#libproxy/libproxy#37).
+ Fix build using cmake 3.7.
+ Fix deprecation warnings of pxgsettings with glib 2.46.
+ Improve the get-pac test suite (gh#libproxy/libproxy#47).
- Drop update-from-svn.sh: The script has not been usable for
years, since libproxy is no longer hosted in this svn repo.
- Drop upstream merged patches:
+ libproxy-cmake-3.7.patch
+ libproxy-FindMono-4.6.patch
+ libproxy-gnome-waitpid.patch
+ libproxy-python3-support.patch
- Re-enable the test suite: with the upstream changes this should
now be more reliable.
* Tue Nov 22 2016 dimstar@opensuse.org
- Add libproxy-cmake-3.7.patch: Fix build with cmake 3.7.
* Thu Sep 29 2016 dimstar@opensuse.org
- Add libproxy-FindMono-4.6.patch: Fall back to mcs if gmcs cannot
be found. Fixes issues with mono 4.6, which no longer ships the
wrapper by default.
* Mon Aug 08 2016 dimstar@opensuse.org
- Add libproxy-python3-support.patch: Allow to build PYTHON2 and
PYTHON3 bindings during the same build phase.
- Create new subpackage python3-libproxy.
- Add python3-devel BuildRequires when not building core.
* Fri Jul 22 2016 dimstar@opensuse.org
- Add libproxy-gnome-waitpid.patch: GNOME3: Wait for pxgsettings to
vanish while destroying the plugin (boo#967601).
* Fri May 20 2016 alarrosa@suse.com
- Update to GNOME 3.20.2 (Fate#318572, bnc#980527)
* Tue May 10 2016 dimstar@opensuse.org
- Require libqt5-qttools by libproxy1-config-kde: the plugin spawns
qtpaths to find the right config files (boo#979232).
- Trigger libproxy1-config-kde for installation when
plasma5-session and libproxy1 are installed.
* Mon May 09 2016 dimstar@opensuse.org
- Fix condition to not build KDE plugin for SLE.
* Thu Apr 28 2016 dimstar@opensuse.org
- Update to version 0.4.13:
+ Allow linking webkit pacrunner against javascriptcore-4.0
(webkit2).
+ Allow to disable building of the KDE module
(-DWITH_KDE=ON/OFF).
+ Fix compilation errors with CLang on MacOSX.
+ bindings: perl: Add an option to explicitly link against
libperl.so. Some distributions want to do it, other prefer not
to, the library is anyway in context of perl.
+ config_kde: Add a basic cache and invalidation: performance
improvement for the KDE module.
- Pass -DWITH_KDE=OFF to cmake when building core.
- Replace pkgconfig(webkitgtk-3.0) BuildRequires with
pkgconfig(javascriptcoregtk-4.0): make use of the WebKit2 port.
* Fri Apr 15 2016 mgorse@suse.com
- Update to GNOME 3.20 Fate#318572
* Thu Jan 14 2016 fcrozat@suse.com
- Disable building libproxy-config-kde on SLE.
* Tue Jan 12 2016 dimstar@opensuse.org
- Update to version 0.4.12:
+ Move development to github.com/libproxy/libproxy.
+ Fix fd leak in get_pac (Bug #185).
+ Detect running MATE session (Bug #186, Part1).
+ Fix linking of perl bindings to pthread (Bug #182).
+ Correctly detect spidermonky (mozjs185) (Bug #188).
+ Stop pxgsettings from segfaulting on exit (Bug #192).
+ Fix test #10 (Bug #189).
+ Fix build on Mac OS X (Bug #183).
+ Add a generic KDE Config module (fix crashes of Qt5 based
apps) (issue#4).
- Drop upstream fixed patches:
+ libproxy-pxgsettings-crash.patch
+ libproxy-no-libperl.patch
+ libproxy-pxgsettings-signals.patch
- Rename libproxy1-config-kde4 subpackage to libproxy-config-kde,
following upstreams introduction of the generic config loader.
- Require libKF5ConfigCore5 from libproxy1-config-kde (we don't
really need the library, but kreadconfig5 in this package).
- Replace libkde4-devel and libqt4-devel BuildRequires with
libKF5ConfigCore5: the new KDE config parser interacts directly
with kreadconfig5 and does not link to Qt.
* Fri May 15 2015 dimstar@opensuse.org
- Add libproxy-pxgsettings-signals.patch: Fix for pxgsettins not
actively monitoring gsetting changes. Due to recent changes in
GLib, only values are being monitored, that are read AFTER the
signal handler is attached.
- Adjust baselibs.conf to match what is currenly being built.
/usr/lib64/libproxy-0.4.17/modules/network_networkmanager.so
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 18:11:13 2024