| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: sane-backends-autoconfig | Distribution: SUSE Linux Enterprise 15 |
| Version: 1.0.32 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: 6.6.2 | Build date: Thu Feb 25 11:11:57 2021 |
| Group: Hardware/Scanner | Build host: xinomavro |
| Size: 69323 | Source RPM: sane-backends-1.0.32-6.6.2.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: http://www.sane-project.org/ | |
| Summary: USB Scanner Autoconfiguration | |
USB scanner autoconfiguration happens via udev. The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is "complete" or "good", and which do not require firmware upload. When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated). It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected. If you do not like automated driver activation, do not install this package or remove it when it is already installed.
GPL-2.0+ and LGPL-2.1+ and SUSE-Public-Domain
* Mon Feb 22 2021 jsmeix@suse.de
- sane-backends version upgrade to 1.0.32 for SLE15:
* sane-backends version upgrade to 1.0.32
to fix bugs in sane-backends version 1.0.31 in particular
https://gitlab.com/sane-project/backends/-/issues/402
double height image with the avision backend (bsc#1179065)
to avoid regressions by hardware enablement for scanners
(jsc#SLE-15561 and jsc#SLE-15560 with jsc#ECO-2418)
cf. the entry below dated "Wed Oct 14 11:17:03 CEST 2020"
* Mon Feb 15 2021 stefan.bruens@rwth-aachen.de
- Remove udev rules mangling for USB devices (ATTR vs ATTRS) (!510)
- Do no add SCSI id twice for EPSON Perfection 1640SU (!509)
* Mon Feb 15 2021 jsmeix@suse.de
- Upgraded to sane-backends version 1.0.32
Changes since 1.0.31
see https://gitlab.com/sane-project/backends/-/blob/master/NEWS
Numbers of the form '(#NNN)' usually mean upstream issues like
https://gitlab.com/sane-project/backends/-/issues/NNN and numbers
of the form '(!MMM)' usually mean upstream merge requests like
https://gitlab.com/sane-project/backends/-/merge_requests/MMM
Backends
* all backends now respect the 'local_only' parameter when 'true'
is passed to 'sane_get_devices()' in that they do not actively
go out looking for networked devices (!502)
* 'artec_eplus48u': fixes configuration for AstraSlim SE (!545)
* 'avision': adds the AV186+ and AV188 as supported (!532)
* 'avision': fixes doubled height issue (#402)
* 'avision': fixes a debug message and compiler warning (!515)
* 'canon_dr': adds support for the DR-C120 and DR-C130 (#175)
* 'canon_dr': adds support for uploading of fine calibration
uploads
* 'canon_dr': enables fine calibration for the P-208
* 'canon_dr': improves DR-C225 support (#431)
* 'canon_lide70': adds support for document scanning
on the Canon LiDE 600(F), thanks to a hardware donation
by Georg Sauthoff
* 'dll': fixes a memory leak (!537)
* 'epson2': adds support for the ET-2600 (#395)
* 'epson2': adds autofocus support for devices
that support it (!531)
* 'epson2': fixes brightness support for DS-G20000/12000XL (!529)
* 'epson2': fixes an unchecked return value issue (!526)
* 'escl': adds support for brightness, threshold, sharpen
and contrast options (!527, !528)
* 'escl': adds support for LaserJet FLowMFP M578
and MFP M630 (#424)
* 'escl': adds support for DeskJet 2710, 2723 (!519)
and 3760 (!554)
* 'escl': adds support for the PIXMA TS-5351 (!544)
and MG5765 (!517)
* 'escl': adds support for the Brother HL-L258DW (!517)
* 'escl': fixes Avahi device discovery (!536)
* 'escl': fixes crashes for devices without a flatbed (!554)
* 'escl': fixes segfaults in option handling (!557)
* 'escl': fixes sleep mode (!577)
* 'escl': fixes builds without libpoppler-glib-dev (#422)
* 'escl': fixes a memory issue in its capability handling (#425)
* 'fujitsu': fixes brightness/contrast for the iX500
* 'fujitsu': fixes memory corruption for duplex scans
* 'genesys': disables support for CanoScan 4400F to prevent
possible physical damage (#436)
* 'gt68xx': fixes scan cancellation logic (#356)
* 'pixma': adds untested support for models
released in 2020 (!553)
* 'pixma': adds support for ADF scans on the i-SENSYS MF260
* 'pixma': adds support for PIXMA M340 buttons
and ADF status (!513)
* 'pixma': adds an option to control when to calibrate (#321)
* 'pixma': fixes support for the MX492 (!548)
* 'pixma': fixes ADF support for the MX490 Series
* 'pixma': fixes max resolution for ADF scans
on the PIXMA M320 (#364)
* 'pixma': fixes compile errors when libxml2
is not available (#345)
* 'plustek': fixes CanoScanN650u discovery (#137)
* 'test': fixes several memory leaks (!537)
Frontends
* 'saned': add support for listening on a custom
or ephemeral port via a new '-p'/'--port' option (!549)
* 'scanimage': fixes crashes for multi-pass
and handheld scans (#408)
* 'scanimage': fixes a memory leak (!551)
* 'scanimage': fixes option handling
for non-compliant backends (#362)
Documentation
* updates our copy of the GPL with the FSF's current postal
address. This changes references to the Library GPL (LGPL-2.0)
into refs to the Lesser GPL (LGPL-2.1) but does *not* affect
the licensing of our backends (#320).
* source code now points to the Free Software Foundation's
website for copies of the GPL and LGPL (#320)
* updates translations for British English and Ukrainian
* adds a pointer to our Ubuntu PPA for pre-built binaries
* adds SCSI IDs for the EPSON Perfection 1640SU (!509)
* fixes a boat-load of spelling mistakes (!516, thanks @marschap)
* updates description files for 'scangearmp2'
and 'utsushi' external backends
Build
* removes support for 'automake' maintainer mode (!522)
* removes 'sane' subdirectory from the lock directory
to fix issues when the lock directory is on 'tmpfs' (#363)
* adds support for builds using GitLab "source" tarballs (#248)
* fixes static link scenarios (#124)
* fixes 'python' invocations to use the detected program (!525)
* disables 'genesys' testsuite when that backend
is not built (#354)
* suppresses warnings about obsolete autoconf macros (#122)
* fixes availability of sane-backends.pot file inputs (#344)
* fixes 'configure.ac' for use with 'autoconf-2.70' (#409)
* removes CVS keywords from the source to ease use
by downstreams that still use CVS (!547)
Miscellaneous
* udev rules now trigger on all events other
than 'remove' (!541). This aims to address a kernel API change
introduced in 4.14. The new behaviour may slow down udev's
processing of kernel events when still using our plain 'udev'
or 'udev+acl' rules, even though these have been optimized
slightly (#341). If that bothers you, now is a good time
to switch to our 'udev+hwdb' rules in combination with
the 'hwdb' database if you have not done so already.
* Wed Oct 14 2020 jsmeix@suse.de
- sane-backends version upgrade to 1.0.31 for SLE15:
* sane-backends version upgrade to 1.0.30
fixes memory corruption bugs CVE-2020-12861, CVE-2020-12862,
CVE-2020-12863, CVE-2020-12864, CVE-2020-12865,
CVE-2020-12866, CVE-2020-12867 (bsc#1172524)
cf. the entry below dated "Tue Aug 18 15:15:05 UTC 2020"
* sane-backends version upgrade to 1.0.31
to further improve hardware enablement for scanner devices
(jsc#SLE-15561 and jsc#SLE-15560 with jsc#ECO-2418)
* The new sane-backends version requires additionally the
libpoppler-glib8 RPM (because of the new escl backend)
which is provided by the SLE15 Basesystem-Module.
* Wed Sep 23 2020 jsmeix@suse.de
- Upgraded to sane-backends version 1.0.31
Changes since 1.0.30
see https://gitlab.com/sane-project/backends/-/blob/master/NEWS
Backends
* adds the canon_lide70 backend
* avision: adds support for the KODAK i1120,
fixes thread cancellation issues,
disables exposure option for non-filmscanners
* canon_dr: improves error reporting
* dmc: fixes compiler warnings on the scan area options
* epsonds: rewrites the network I/O following changes
made to the epson2 backend in 1.0.30 to fix security issues.
Network support is still unsupported.
* escl: adds ADF support, fixes many minor issues and improves
error handling. Now also supports devices behind a proxy
(needs explicit configuration).
* fujitsu: adds support for the fi-800R and a card scanning
slot, fixes a bug when reading hardware sensors on the first
invocation. Adds USB IDs for fi-7800 and fi-7900.
* genesys: adds support for the Canon 5600F, Canon LiDE 90,
Plustek OpticFilm 7200 and 7200 (v2), 7400, 7600i, 8100
and 8200i. Fixes several issues with the Canon 8600F.
Adds 4800dpi support for the Canon LiDE 210 and fixes 3200dpi
flatbed support on the Canon 8400F. Adds an option to fill
dark calibration with a constant. Adds transparency support
for gl847 chipset based devices. Fixes CIS scanner support
for gl842 chipset based devices. Removes lineart and image
enhancement emulation support.
* gphoto: supports the PLANon DocuPen RC800 (with a recent
enough version of gphoto2)
* gt68xx: modifies scan cancellation behaviour
* hp5400: adds button support, fixes a scan cancellation
crash issue
* pixma: add supports for the i-SENSYS MF440 Series and untested
support for the PIXMMA G7000 Series and GM4000 Series as well
as the i-SENSYS MF720 Series.
* plustek: fixes a potential buffer overrun
* test: adds gamma options
Documentation
* removes the SANE Standard. This is now maintained
as a separate project at
https://gitlab.com/sane-project/standard
HTML and PDF versions can be found at
https://sane-project.gitlab.io/standard/
* adds and updates information for multiple supported and
unsupported devices
* translation updates for British English, French, German,
Italian and Ukranian
* scanimage: documents the JPEG compression level
* minor improvements documenting build requirements
Build
* removes the --with-api-spec option from configure
* replaces the --enable-avahi option with an --with-avahi
that defaults to enabling if possible. If the option is given
and the required support is not available, configure will
exit with an error.
* improves checking for libjpeg version dependent requirements
* has been made reproducable (upstream issue 228)
* fixes build issues on MinGW
Miscellaneous
* various fixes and improvements in the USB record/replay support
* fixes a file descriptor validation test in sanei_pio
* adds missing include in sanei_usb
- sane-backends.builttime.patch is no longer needed because the
issue https://gitlab.com/sane-project/backends/-/issues/228
is fixed in the upstream sources
* Tue Aug 18 2020 stefan.bruens@rwth-aachen.de
- Update to 1.0.30:
* epson2: fixes CVE-2020-12867 (GHSL-2020-075) and several memory
management issues found while addressing that CVE
* epsonds: addresses out-of-bound memory access issues to fix
CVE-2020-12862 (GHSL-2020-082) and CVE-2020-12863 (GHSL-2020-083),
addresses a buffer overflow fixing CVE-2020-12865 (GHSL-2020-084)
and disables network autodiscovery to mitigate CVE-2020-12866
(GHSL-2020-079), CVE-2020-12861 (GHSL-2020-080) and CVE-2020-12864
(GHSL-2020-081). Note that this backend does not support network
scanners to begin with.
* magicolor: fixes a floating point exception and uninitialized data
read
* fixes an overflow in sanei_tcp_read()
* Thu Feb 20 2020 stefan.bruens@rwth-aachen.de
- Update to 1.0.29:
* Backends
+ adds an escl backend (theoretically supporting all AirPrint
devices with a scan unit)
+ adds support for 23 new scanner models via existing backends
+ significantly changes genesys and pixma backends
+ fixes bugs in canon_dr, fujitsu, hp3900, mustek_usb2,
plustek and xerox_mfp backends
+ fixes all compiler warnings on Debian 10 (#120)
+ fixes portability issues for uClibc-ng and MacOS builds
+ adds support to record and replay USB I/O traffic
+ adds timestamps to debug logs
* Frontends
+ fixes a 32-bit arithmetic overflow issue in scanimage
* Documentation
+ updates translations for British English, Catalan, German,
Ukrainian, Valencian
+ adds scangearmp2 external backend descriptions
+ updates hpaio and utsushi external backend descriptions
+ adds the ChangeLogs/ directory to the source tarball (#103)
* Build
+ additionally requires libcurl and libxml2 to build the
escl backend
+ requires libxml2 for USB I/O recording and replay
functionality
+ re-enables pthread support for backends that use its API
directly, irrespective of the pthread_t type (#153)
+ moves genesys and pixma backends to a directory of their own
- Update to 1.0.28:
* Backends
+ adds a ricoh2 backend
+ adds support for 40+ new scanner models
+ significantly changes canon_dr, fujitsu, genesys, gt68xx,
+ hp5590 and, pixma backends
+ fixes bugs in as6e, avision, mustek and plustek backends
+ fixes scores of compiler warnings
* Frontends
+ adds, changes and removes options for saned (see man 8 saned
for details)
- adds: -l (listen), -D (daemonize), -o (once),
- e (stderr), -u (user)
- removes: -s (syslog). Use -a -d level -o -f for the
old behavior
- changes: -d (debug). Use -a -d level -o -f -e for the
old behavior
+ saned now cancels scans if the data connections appears to
have gone away (after 4 seconds by default, configurable in
saned.conf)
+ adds --output-file option to scanimage
+ adds --help option to scan-find-scanner
+ changes sane-desc to create relative hyperlinks
* Documentation
+ adds translations for Catalan, Hebrew and Valencian
+ updates translations for British English, Dutch, German and
+ Ukrainian
+ marks unmaintained backends as such
+ documents USB workaround in sane-usb manual page
* Build
+ requires a C++11 compatible compiler for the genesys backend
+ requires a JPEG library when building the pixma backend
+ fixes unneeded linking when not using preloadable backend
support
+ disables pthread support for systems with non-integral
pthread_t type
+ normalizes trailing whitespace in source code files. If you
have local patches that no longer apply, have a look at the
whitespace ignoring options of patch and git apply.
- Rebased patches:
* sane-backends.builttime.patch
- Dropped patches:
* no-descriptions-external-hpoj.patch
* Thu Apr 12 2018 jsmeix@suse.de
- Replaced the non-working saned@.service with the simpler kind
according to the second template in "man saned" of the therein
described "systemd configuration for saned" (boo#1074054).
* Wed Mar 21 2018 jsmeix@suse.de
- Drop BuildRequires for libieee1284-devel and libieee1284
which is only needed for some parallel port scanners
but parallel port scanners are no longer supported
so that the backends canon_pp, hpsj5s, and mustek_pp
are no longer provided.
- Fixed installation of systemd unit files saned@.service
and saned.socket that enable socket based saned activation
which replaces xinetd (boo#1074054).
* Sun Oct 29 2017 meissner@suse.com
- add a 32bit devel package for use in wine32 bit builds
* Fri Jun 16 2017 nmoudra@suse.com
- Deleted xinetd service in favor of socket based activation
via systemd unit files saned@.service and saned.socket
see https://build.opensuse.org/request/show/504186
* Wed May 24 2017 jsmeix@suse.de
- Upgraded to sane-backends version 1.0.27:
There is no 1.0.26 release of sane-backends.
That number was skipped so that the SANE upstream
development version numbers would more clearly be
an extension of the prior release.
Changes since 1.0.25:
* Significant enhancements to canon_dr, epjitsu, epsonds,
fujitsu, genesys, hp3500, pixma and xerox-mfp backends.
* Minor updates, bugfixes or scanners added in several backends.
* 30+ new scanner models supported.
* Made libusb-1.0 the default for USB support.
* Switched code from C90 to C99 (Thanks to Volker Diels-Grabsch).
* Updated Linux USB3 workaround:
The Linux USB3 workaround which was added in version 1.0.25
is now disabled by default. If you have difficulty using
a scanner which previously worked, or intermittent scanner
availability, try setting the new environment variable
SANE_USB_WORKAROUND=1
before starting your frontend.
* Documentation and translation updates.
* Bugfixes (Avahi, threading, USB, ICC/PNG/JPEG, etc).
* Reduced compiler warnings, improved code:
A special thanks goes to Olaf Meeuwissen for picking up
the janitorial duties in sane-backends. He has found and
fixed a large number of long-standing bugs, curated the
SANE upstream bug tracker, improved the build scripts
and docs, and provided user support.
- CVE-2017-6318.patch is no longer needed because
the issue is fixed in the upstream sources.
- dell1600n_net-fix-strncat.patch is no longer needed because
the issue is fixed in the upstream sources.
* Tue Feb 28 2017 jsmeix@suse.de
- CVE-2017-6318.patch fixes CVE-2017-6318 which is about that via
access to saned some opcodes could leak uninitialized memory
back to the requester allowing information disclosure
of memory content in saned (bsc#1027197).
In general regarding "access to saned" see
https://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings
* Mon Jan 11 2016 olaf@aepfle.de
- sane-backends.builttime.patch: reduce build-compare noise
* Tue Dec 29 2015 stefan.bruens@rwth-aachen.de
- remove gphoto2 backend, as is usefulness is highly questionable,
but adds many (indirect) build and runtime dependencies
* Tue Oct 06 2015 jsmeix@suse.de
- Upgraded to sane-backends version 1.0.25:
Changes since 1.0.24:
* New backends: epsonds (Epson DS, PX and WF series),
pieusb (PIE and Reflecta film/slide scanners).
* Support for JPG and PNG output format in scanimage.
* Significant enhancements to avision, canon_dr, epjitsu,
fujitsu, genesys, kodakaio and pixma backends.
* Minor updates, bugfixes or scanners added in several backends.
* 300 new scanner models supported.
* Workaround for USB3 problems in Linux kernel.
* Added code for IR functionality.
* Documentation and translation updates.
* Bugfixes (threading, networking, udev rules).
A big thanks to Olaf Meeuwissen, for his efforts in bug triage,
patch wrangling and code cleanups.
- fix-buffer-overflow.patch, fix-mustek_pp_ccd300.c.patch,
install-umax_pp-tool.patch, MG5550-works.patch are obsolete
since sane-backends-1.0.24 because it is fixed in the source.
- re-add-SANE_CAP_ALWAYS_SETTABLE.patch should be longer needed
because there should be longer a fontend that references
SANE_CAP_ALWAYS_SETTABLE in its source code.
- Recreated adapt_epkowa.desc_for_yast2-scanner.patch
according to the comment in sane-backends.spec
so that it applies for sane-backends-1.0.25.
- Dropped avision.c.patch and avision.conf.patch
(cf. the entry below dated "Mon Sep 15 23:23:23 UTC 2013")
because it does no longer apply to sane-backends-1.0.25 sources.
Issues that are not specific for a particular Linux distribution
must be fixed directly at SANE upstream so that all Linux
distributions get it properly fixed and not via patches
at one particular Linux distribution where it falls apart
each time when SANE upstream changes that sources.
- Added BuildRequires for libpng-devel and libtiff-devel because
scanimage output format supports PNG and TIFF.
- dell1600n_net-fix-strncat.patch fixes the following build error:
Statement might be overflowing a buffer in strncat.
BAD: strncat(buffer,charptr,sizeof(buffer)) is wrong
GOOD: strncat(buffer,charptr,sizeof(buffer)-strlen(buffer)-1)
The upstream issue report is
https://alioth.debian.org/tracker/index.php?func=detail&aid=315198&group_id=30186&atid=410366
- Disabled use of LaTeX to generate documentation because LaTeX
blows up the build system and "BuildRequires: texlive-latex"
causes various cycles and the sane.ps documentation
is not for users but for developers who could get
the "Programmer's Documentation" from SANE upstream
at http://www.sane-project.org/docs.html
* Wed Jan 14 2015 johannes@lst.de
- MG5550-works.patch: support Canon Pixma MG5500
/etc/udev /etc/udev/rules.d /etc/udev/rules.d/56-sane-backends-autoconfig.rules
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 13:44:15 2024